Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Indices”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Investigation of the use of an electronic multifunction display and an electromechanical horizontal situation indicator for guidance and control of powered-lift short-haul aircraft

The use which pilots make of a moving map display from en route through the terminal area and including the approach and go-around flight phases was investigated. The content and function of each of three primary STOLAND displays are reviewed from an operational point of view. The primary displays are the electronic attitude director indicator (EADI), the horizontal situation indicator (HSI), and the multifunction display (MFD). Manually controlled flight with both flight director guidance and raw situation data is examined in detail in a simulated flight experiment with emphasis on tracking reference flight plans and maintaining geographic orientation after missed approaches. Eye-point-of-regard and workload measurements, coupled with task performance measurements, pilot opinion ratings, and pilot comments are presented. The experimental program was designed to offer a systematic objective and subjective comparison of pilots' use of the moving map MFD in conjunction with the other displays.

Clement, W. F.↗
NASA NTRS1977

Calibration of a universal indicated turbulence system

Theoretical and experimental work on a Universal Indicated Turbulence Meter is described. A mathematical transfer function from turbulence input to output indication was developed. A random ergodic process and a Gaussian turbulence distribution were assumed. A calibration technique based on this transfer function was developed. The computer contains a variable gain amplifier to make the system output independent of average velocity. The range over which this independence holds was determined. An optimum dynamic response was obtained for the tubulation between the system pitot tube and pressure transducer by making dynamic response measurements for orifices of various lengths and diameters at the source end.

Chapin, W. G.↗
NASA NTRS1977

Wind shear and wet and dry thermodynamic indices as predictors of thunderstorm motion and severity and application to the AVE 4 experimental data

Two types of parameters are computed and mapped for use in assessing their individual merits as predictors of occurrence and severity of thunderstorms. The first group is comprised of equivalent potential temperature, potential temperature, water vapor mixing ratio, and wind speed. Equivalent potential temperature maxima and strong gradients of equivalent potential temperature at the surface correlate well with regions of thunderstorm activity. The second type, comprised of the energy index, shear index, and energy shear index, incorporates some model dynamics of thunderstorms, including nonthermodynamic forcing. The energy shear index is found to improve prediction of tornadic and high-wind situations slightly better than other indices. It is concluded that further development and refinement of nonthermodynamic aspects of predictive indices are definitely warranted.

Connell, J. R.↗
NASA NTRS1976

Surface exposure indices of lunar soils - A comparative FMR study

The intensity of the characteristic FMR resonance of a lunar soil normalized to its total iron content (Is/FeO) was tested for use as its index of relative surface exposure age. The characteristic resonance is due to fine-grained metal that is the result of micrometeorite impact at the lunar surface. In this study, Is/FeO was measured for the below 250 micron size fraction of 152 soils and for the 90-150 micron size fraction of 88 soils. With this large suite of samples it was possible to correlate Is/FeO with a variety of other indices of relative surface exposure age (N, C, trapped He-4, trapped Ar-36, petrographic and magnetic agglutinates, and mean grain size) and thus not only affirm that Is/FeO is an index of relative surface exposure age but also consider the relative merits of the various surface exposure indices.

Morris, R. V.↗
NASA NTRS1979

Noncontacting valve-position indicator

Position of sealed valve or other movable part is indicated without penetrating housing. Flux from magnets connected to stem of hydraulic valve penetrates pressure wall and is sensed by Hall-effect transducer outside wall. When valve closes, moving stem and magnets, voltage from transducer decreases; thus, stem position is indicated without physical contact.

Crovella, E. A.↗
NASA NTRS1980

Bolt-tension indicator

Pin attached to bottom of hole through long axis of machine bolt can be used to indicate correct bolt tension without torque meters or extensometers. Bolt elongates when tightened, but pin does not, and so appears to recede within bolt head. Steps cut in exposed end of pin would indicate acceptable range of tightness. Design would be particularly convenient in field locations without specialized instrumentation.

Wilson, K. L.↗
NASA NTRS1979

Ultrasonic attenuation as an indicator of fatigue life of graphite/epoxy fiber composite

The narrow band ultrasonic longitudinal wave velocity and attenuation were measured as a function of the transfiber compression-compression fatigue of unidirectional graphite/epoxy composites. No change in velocity was detected at any point in fatigue life. For specimens fatigued at 80% of static strength, there was generally a 5% to 10% increase in attenuation, however, this increase does not appear to be a satisfactory indicator of fatigue life. On the other hand, there appears to be a correlation between initial attenuation (measured prior to cycling) and cycles to fracture. Initial attenuation as measured at 1.5 MHz and 2.0 MHz appears to be a good indicator of relative fatigue life.

Williams, J. H., Jr.↗
NASA NTRS1979

The N III and O IV intersystem multiplets as density indicators for solar plasmas

The usefulness of the relative intensities of lines within the N III intersystem multiplet near 1750 A as an electron density indicator for solar plasmas is discussed. Although the relative intensities of lines in the multiplet are density sensitive, the intensity ratios should at present be used with caution. Errors of the order of 20% in transition probabilities and excitation rate coefficients can lead to order of magnitude errors in density determinations. It is demonstrated that the intensity ratio of one of the N III intersystem lines and an allowed line from a different ion may also be used as a density indicator in the 10 to the 9th to 10 to the 11th per cu cm regime.

Feldman, U.↗
NASA NTRS1982

Pressure Switch Is a Low Cost Battery Indicator

Conventional pressure switch, fabricated by printed-circuit manufacturing techniques, can indicate when charge on battery departs from preset level. Membrane on switch is exposed to internal pressure of battery, which varies according to stored charge. When pressure varies from preset level, switch can turn on a light-emitting diode or similar indicator to warn user that battery is low.

Abita, J. L.↗
NASA NTRS1982

Weld width indicates weld strength

Width of butt weld in 2219-T87 aluminum has been found to be more reliable indicator of weld strength than more traditional parameters of power input and cooling rate. Yield stress and ultimate tensile strength tend to decrease with weld size. This conclusion supports view of many professional welders who give priority to weld geometry over welding energy or cooling rate as indicator of weld quality.

Nunes, A. C. J.↗
NASA NTRS1981

Solar variability indications from Nimbus 7 satellite data

The cavity pyrheliometer sensor of the Nimbus 7 Earth Radiation Experiment indicated low-level variability of the total solar irradiance. The variability appears to be inversely correlated with common solar activity indicators in an event sense. the limitations of the measuring system and available data sets are described.

Hickey, J. R.↗
NASA NTRS1981

Selection of the Australian indicator region

Each Australian state was examined for the availability of LANDSAT data, area, yield, and production characteristics, statistics, crop calendars, and other ancillary data. Agrophysical conditions that could influence labeling and classification accuracies were identified in connection with the highest producing states as determined from available Australian crop statistics. Based primarily on these production statistics, Western Australia and New South Wales were selected as the wheat indicator region for Australia. The general characteristics of wheat in the indicator region, with potential problems anticipated for proportion estimation are considered. The varieties of wheat, the diseases and pests common to New South Wales, and the wheat growing regions of both states are examined.

Reed, C. R.↗
NASA NTRS1982

Selection of the Argentine indicator region

Determined from available Argentine crop statistics, selection of the Indicator Region was based on the highest wheat, corn, and soybean producing provinces, which were: Buenos Aires, Cordoba, Entre Rios, and Santa Fe. Each province in Argentina was examined for the availability of LANDSAT data; area, yield and production statistics; crop calendars; and other ancillary data. The Argentine Indicator Region is described.

Ramirez, C. J.↗
NASA NTRS1982

Agronomic characterization of the Argentina Indicator Region

An overview of the Argentina indicator region including information on topography, climate, soils and vegetation is presented followed by a regionalization of crop livestock land use. Corn/soybean production and exports as well as agricultural practices are discussed. Similarities and differences in the physical agronomic scene, crop livestock land use and agricultural practices between the U.S. corn belt and the Argentine pampa are considered. The Argentine agricultural economy is described. Crop calendars for the Argentina indicator region, an accompanying description, notes on crop-livestock zones, wheat production, field size, and agricultural problems and practices are included.

Hicks, D. R.↗
NASA NTRS1982

Film advance indicator

A film advancement indicator which includes an optical sensor that detects the rotational movement of a disc that rotates only when the film advance is described. When the film does not advance, an indicator light is activated. A counter is included in the electronic circuit to determine the number of film frames advanced.

Freeman, E. T.↗
NASA NTRS1982

Relations between the Birkeland currents, the auroral electrojet indices and high latitude Joule heating

Field-aligned currents were postulated by Birkeland (1908) to explain the magnetic perturbations in the auroral zone. Theoretical models have been developed to examine the effect of these currents on the ionosphere. These models, in general, involve very extensive computer programs, and it is difficult to see how their very complicated boundary conditions and assumptions affect the relationships between the Birkeland currents and magnetic activity. In the present investigation, a simplified analysis is used to study the average behavior of the large-scale ionospheric current paths and to examine the interrelationships of various parameters. The relationship of the parameters of the current deposition regions to the magnetic indices is investigated along with the polar cap potential. Attention is given to the experimental values of coefficients, and relations between the Birkeland current densities, current intensities, currents, and the AL, AU, AE indices are discussed.

Nisbet, J. S.↗