Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Carbon Fiber Composite Processing Using Isothermal Resins

To meet future demand for single-aisle composite aircraft production, manufacturing rates are expected to increase by up to six times current production rates. Resin infusion is a manufacturing method that has potential to enable fabrication of structures at the desired rates. However, production cycle times with currently available commercial infusion resins cannot support the rates needed for an estimated 80 aircraft per month. Recently, rapid-curing isothermal resins were developed that can reduce the overall processing time. These resins can be infused, cured, and demolded at a single temperature below 100 °C, thereby eliminating the need for time consuming temperature ramps and shortening the overall cure time. In addition, the low temperatures enable use of low-cost tooling during production. This presentation will discuss the use of resin transfer molding to produce composites with rapid-curing isothermal resins, manufacturing considerations, and performance characteristics of the composites.

John M Gardner↗

Precipitation and mechanical properties of Nb-modified ferritic stainless steel during isothermal aging

The influence of isothermal aging on precipitation behavior and mechanical properties of Nb-modified ferritic stainless steel was investigated using Thermo-calc software, scanning electron microscopy and transmission electron microscopy. It was observed that TiN, NbC and Fe{sub 2}Nb formed in the investigated steel and the experimental results agreed well with the results calculated by Thermo-calc software. During isothermal aging at 800 deg. C, the coarsening rate of Fe{sub 2}Nb is greater than that of NbC, and the calculated average sizes of NbC and Fe{sub 2}Nb of the aged specimen agreed with the experimental results. In addition, the tensile strength and micro-hardness of the ferritic stainless steel increased with increased aging time from 24 h to 48 h. But aging at 800 deg. C for 96 h caused the coarsening of the precipitation, which led to a decrease of tensile strength and micro-hardness.

36 MATERIALS SCIENCE↗

Isothermal oxidation of zirconium using steam

Oxidation of zirconium and its alloys under any atmosphere is generally characterised by a protective and non-protective stage. During the protective stage, the kinetics of oxidation are quasi-parabolic, while the oxide scale formed on the surface of the metal is black, compact, and protective in nature. For the non-protective stage, the oxidation rate becomes linear, while the protective oxide film turns into a deteriorated white scale. Breakaway is known as the transition point from protective to non-protective stage. The actual mechanism leading to breakaway of zirconium is still a matter of controversy, however some of the most common factors affecting breakaway are the following: - Impurities on the metal (Carbon, Oxygen, Nitrogen); - Oxidizing atmosphere (Presence of H{sub 2}O (g) or N{sub 2} (g)); - Sample preparation (Chemically etched or polished); - Temperature (LWR, LOCA). This research investigates the effect of temperature on 'breakaway' when zirconium is oxidized isothermally in steam for 60 min at 800 and 900 deg. C using thermogravimetric and optical microscopic imaging techniques. 1. Steam isothermal oxidations were performed on zirconium at 800 and 900 deg. C using a Thermogravimetric Analyzer (TGA). 2. Log-log plots of mass gain vs time were obtained from thermogravimetric results to calculate the reaction orders (n) and reaction rate constants (K) during oxidation. 3. Results of the kinetics of reaction were correlated with optical microscopic images form Light Microscope (LM) and Scanning Electron Microscope (SEM). Breakaway depends very strongly on temperature. At 800 deg. C, the weight gain followed a cubic-parabolic behaviour with evidence of a protective oxide film. On the other hand, oxidation at 900 deg. C showed signs of breakaway since the oxide film was cracked and oxidation rate was almost linear throughout the reaction.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SaltStone Wastewater Cement Study Using Isothermal Calorimetry, Standard Concrete Characterization Techniques, and CemGEMS - 25169

Cementitious reagents are used to solidify/stabilize aqueous radioactive, hazardous, and mixed salt solutions, and sludges to meet low-level radioactive waste (LLW) and Resource Conservation and Recovery Act (RCRA) requirements for disposal at Department of Energy (DOE). It is flexible enough to solidify radioactive wastewater saturated in complex species that include but are not limited to radioactive isotopes from the bombardment of neutrons in reactor operation, corrosion products from metallic components, and a variety of soluble organic compounds. [1,2]. Waste form testing typically includes processing or fresh properties, cured properties, compressive strength and hydraulic properties, porosity, density, saturated and unsaturated moisture transport, and leachability of contaminants in the waste form pore solution. Properties are collected over a relatively limited time, typically 28 to 365 days [3]. In addition, changes in the waste form as the result of time and changing conditions are important for concrete engineers to predict overall performance of the forms and potential release of contaminants in the disposal process via unintended filtration into the environment [4]. These predictions are determined/calculated characterizing young waste forms (relative to the standard age of concrete) and are based on transport through soluble ions in pore solutions. Characterization methods include X-ray, SEM, and isothermal calorimetry among other methods used to define the composition, amorphous vs. crystalline nature of the components, and the energetic formation mechanisms for multi-phase mineral systems. [5–7] Isothermal calorimetry is a well standardized technique for cements and concretes and can be used to predict the timing and nature of the hydration reactions.[8] The technique can measure long term energetic

Bustamante, Michael E. [Savannah River National La↗

Kinetic, Isotherm and Thermodynamic Studies for Removal of Methylene Blue Using β-Cyclodextrin/Activated Carbon Aerogels

A novel aerogel (β-CD/AC) was prepared through polymerization reaction of β-cyclodextrin (β-CD) with activated carbon (AC) and vacuum freeze drying method. The structure and morphology of β-CD/AC were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer–Emmett–Teller (BET) method and thermogravimetric analysis (TGA). β-CD/AC is used to deal with wastewater containing methylene blue (MB) dye. The effects of AC content in β-CD/AC, pH value, temperature, contact time and amount of adsorbent on the adsorption of MB were studied in detail. The Langmuir and Freundlich adsorption models were applied to describe the equilibrium isotherms. The Langmuir monolayer adsorption capacity of MB onto β-CD/AC was estimated as 166.67 mg/g. The kinetics of MB onto β-CD/AC was well described by the pseudo-second order model. The thermodynamic parameters indicated that the adsorption reaction of MB onto β-CD/AC was endothermic and spontaneous.

36 MATERIALS SCIENCE↗

Highly Efficient Removal of Lead Ions from Aqueous Solutions Using Chitosan/Rice Husk Ash/Nano Alumina with a Focus on Optimization by Response Surface Methodology: Isotherm, Kinetic, and Thermodynamic Studies

In the present study, an adsorbent named chitosan/rice husk ash/nano-γ alumina was prepared and used for the removal of lead ions from aqueous solutions. It was characterized by FESEM, FTIR, XRD, and BET. The important and interactive effects of some considered parameters, such as the initial lead ion concentration, pH, adsorbent mass and contact time, were estimated and optimized by using the central composite design (CCD). The Maximum adsorption efficiency of lead ions under optimum conditions, including the pH of 5, adsorbent mass of 0.01 g, the initial lead ion concentration of 30 ppm, and the contact time of 105 min, was achieved to be 90.98%. The adsorption kinetic was consistent with the pseudo-second-order model (R{sup 2} = 0.9967). The lead adsorption isotherms were well fitted to the Langmuir model, indicating the maximum adsorption capacity of 181.82 mg g{sup −1}. Thermodynamic parameters (R{sup 2}: 0.9200, ΔH°: − 22871.81 kJ mol{sup −1}, ΔG{sup °}: − 10.63 kJ mol{sup −1}, and ΔS{sup °}: 118.37 kJ mol{sup −1} K{sup −1}) were calculated and indicating adsorption process was exothermic and spontaneous in the temperature range of 283.15–313.15 k. The maintenance above 70% capacity of the adsorbent was observed by the regeneration study of chitosan/rice husk ash/nano-γ alumina after six cycles. Comparison of adsorption efficiency of the studied adsorbent and other adsorbents in the removal of lead ions was also done in this paper. Consequently, the excellent properties of the presented nanocomposite could make it an ideal adsorbent for the removal of lead ions from aqueous solutions. Graphical Abstract: .

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Adsorption isotherm, kinetic modeling and mechanism of tetracycline on Pinus taeda-derived activated biochar

The objective of this study was to evaluate the adsorption of tetracycline (TC) on the Pinus taeda-derived activated biochar (BC). Here, after NaOH activation, the well-developed porous surface structure was observed with a significantly increase in surface area (959.9 m 2 /g). The kinetic and isotherm studies indicated that hydrogen bonding and π-π interaction on the heterogeneous surface would be the possible mechanisms, while intra-particle diffusion was considered as the major limitation for the adsorption of TC on the activated BC. The maximum adsorption capacity of the activated BC (274.8 mg TC/g BC) was higher than those of various activated BCs from the previous studies while it was similar to those of commercial activated carbons. It indicated that the activated BC had the high potential for TC removal in water.

59 BASIC BIOLOGICAL SCIENCES↗

Experimental investigation of the effect of temperature on the first desorption isotherm of concrete

In the framework of the radioactive waste management in France, interim storage concrete structures should be submitted to temperatures up to 80 deg. C and subsequent desiccation. The impact of temperature on the sorption properties of concretes has been poorly studied and results are scarce. An experimental campaign was thus carried out to characterize the first desorption isotherms of a modern concrete at 30 deg. C and 80 deg. C. The results show a significant influence of the temperature increase that will have to be accounted for the durability assessment of the long-term interim storage concrete structures. Investigating the causes of these modifications, it appeared that desorption induced by temperature might be the principal mechanism rather than microstructure alteration and water properties evolution.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Water vapor sorption isotherms, pore structure, and moisture transport characteristics of alkali-activated and Portland cement-based binders

Moisture transport plays a key role in determining the different durability-related features of cementitious materials. In this paper, moisture sorption in a range of low-calcium (geopolymer-type) and calcium-rich alkali-activated binders are studied and compared with that of Portland cement-based binders. Through the analysis of water vapor sorption isotherms (WVSI) and mercury intrusion porosimetry (MIP) test results, two vastly different pore structures were observed. Fly ash-based geopolymer-type binders showed a very porous structure where a large volume of mesopores coexisted with a significant volume of macropores. Alkali-activated slag binders, however, had a very fine pore structure, with a relative lack of large macropores. The different pore structure of fly ash-based and slag-based binders led to amplification of pore blocking and cavitation in blended systems by the addition of slag. Analysis of the sorption kinetics showed the prominent effect of the presence of calcium in the matrix to reduce the permeability.

36 MATERIALS SCIENCE↗

Influence of pH on chloride binding isotherms for cement paste and its components

In this paper, chloride (Cl{sup −}) binding isotherms are developed for cement hydration compounds, specifically, calcium-silicate-hydrates (CSH) and AFm phases including mono-sulfate aluminate, hydroxy-AFm, monocarbonate-AFm, and hemicarbonate-AFm, in simulated concrete pore solutions to account for the effect of pH and the presence of other ions. pH and the presence of other ions have a strong influence on the Cl{sup −} binding capacity of cement compounds, which have not been taken into consideration in previous research. A novel experimental technique is developed to characterize the binding capacity from very low (1 mM) to very high concentrations (5 M). To overcome the existing challenges of measuring both low and high Cl{sup −} concentrations without significant dilution and in the presence of SO{sub 4}{sup 2−} and OH{sup −} ions, a potentiometric method was used. The amorphous CSH in the hydrated cement paste; thus, the heterogeneity of the hydrated components of the cement paste was also quantified and accounted for in this study.

36 MATERIALS SCIENCE↗

Near isothermal compressed air energy storage system in residential and commercial buildings: Techno-economic analysis

Electrical energy storage systems offer a wide range of options to efficiently manage our power supply infrastructure. Energy and environmental security via renewable resources and energy storage devices will also play a critical role in addressing the supply-demand challenges. A novel energy efficient storage system based on near isothermal compressed air energy storage concept, named as Ground-Level Integrated Diverse Energy Storage (GLIDES) is analyzed for integration with residential and commercial buildings. Additionally, the influence of different configurational aspects on key performance and cost attributes is presented in this study. GLIDES modules in the range of 0.5 kWh–15 kWh configurations were considered for residential buildings whereas 25 kW h–500 kW h modules were considered for commercial buildings. Detailed cost and performance analysis of the GLIDES module proved them to be an effective resource in lowering the peak energy demand and corresponding utility bills.

25 ENERGY STORAGE↗

Measured CO 2 sorption isotherms with 25 Bakken Petroleum System rock samples from the Lower and Upper Shales, Middle Bakken, and Three Forks formations

Isotherms were measured with 25 Bakken Petroleum System (BPS) rock samples using a magnetic suspension balance at reservoir conditions of 110 °C and pressures up to 345 bar. Samples from four wells represented the Middle Bakken (MB) and Three Forks (TF) production zones, and the Upper Bakken Shale (UBS) and Lower Bakken Shale (LBS) source shales. UBS and LBS CO 2 sorption capacities at 345 bar averaged 12–14 g/kg rock compared to 1.3 to 2.5 g/kg rock for MB and TF. Increasing pressure from 150 to 345 bar resulted in only small increases in CO 2 sorption for all lithofacies. For the UBS and LBS source shales, the higher average total organic carbon (TOC) values (14.7 and 11.4 wt.%) and clay values (25 and 28 wt.%) corresponded to their higher CO 2 sorption values while for the MB and TF samples, lower TOCs (0.3 and 0.5 wt.%) and clay values (8.2 and 18.2 wt.%) corresponded to lower CO 2 sorption values. Here, when all 25 samples (from all lithofacies) were evaluated as a group, sorption capacities were highly correlated with TOC (Spearman's rho values +0.84 to +0.85), with rock density (rho values -0.75 to -0.76), and clay content (rho values +0.66). However, correlations with porosity and thermal maturity (Tmax) were weak. Measured sorption capacities and rock porosities showed that sorption accounted for about 10-times as much CO 2 storage as the available pore space for the UBS and LBS lithofacies. In contrast, the pore space dominated the storage resource of the TF and MB lithofacies.

54 ENVIRONMENTAL SCIENCES↗

A direct numerical simulation study for confined non-isothermal jet impingement at moderate nozzle-to-plate distances: Capturing jet-to-ambient density effects

A direct numerical simulation (DNS) campaign is deployed for a series of confined downward oriented, non-isothermal turbulent impinging jet configurations. A baseline Reynolds number of 9960 is obtained through a precursor DNS pipe flow simulation (Re τ = 505). Three jet temperature configurations (confinement height to nozzle diameter of three) enter a cylindrical domain that share ambient and impingement plate temperatures (298.15 K). The range of jet temperatures are crafted such that the ratio of inlet to ambient density varies from unity to 0.52, showcasing the effect of density disparity on flow characteristics such as core collapse, radial mixing of momentum and energy, near-wall stagnation behavior, wall-jet profiles, and large-scale vortical structures. Surface quantities provided include mean radial heat flux and wall-shear stress profiles, and heat flux histograms at select radial stations. Results showcase increased radial normal stresses for higher temperature jets that support increased mixing, resulting in large-scale recirculation structures that are smaller, while retaining similar normalized radial wall profiles for shear stress, heat flux and pressure. Furthermore, radial plots for wall shear stress and Nusselt number showcase strong radial decay as compared to previous configurations that share similar jet and ambient temperatures. For the 373.15 K case, a Gaussian-like histogram for heat fluxes at the impingement plate transitions to a log-normal profile as radial distances increase. In contrast, the 573.15 K configuration displays a bi-modal heat flux characteristic at the impingement plate, and in similar manner to the moderate temperature counterpart, transitions to a log-normal profile at larger radial distances.

33 ADVANCED PROPULSION SYSTEMS↗

Isothermal evaporation process simulation using the Pitzer model for the Quinary system LiCl–NaCl–KCl–SrCl 2 –H 2 O at 298.15 K

In this study, the Pitzer thermodynamic model for solid-liquid equilibria in the quinary system LiCl–NaCl–KCl–SrCl 2 –H 2 O at 298.15 K was constructed by selecting the proper parameters for the subsystems in the literature. The solubility data of the systems NaCl–SrCl 2 –H 2 O, KCl–SrCl 2 –H 2 O, LiCl–SrCl 2 –H 2 O, and NaCl–KCl–SrCl 2 –H 2 O were used to evaluate the model. Good agreement between the experimental and calculated solubilities shows that the model is reliable. The Pitzer model for the quinary system at 298.15 K was then used to calculate the component solubilities and conduct computer simulation of isothermal evaporation of the mother liquor for the oilfield brine from Nanyishan district in the Qaidam Basin. The evaporation-crystallization path and sequence of salt precipitation, change in concentration and precipitation of lithium, sodium, potassium, and strontium, and water activities during the evaporation process were demonstrated. The salts precipitated from the brine in the order : KCl, NaCl, SrCl 2 ∙6H 2 O, SrCl 2 ∙2H 2 O, and LiCl∙H 2 O. The entire evaporation process may be divided into six stages. In each stage the variation trends for the relationships between ion concentrations or water activities and the evaporation ratio are different. This result of the simulation of brines can be used as a theoretical reference for comprehensive exploitation and utilization of this type of brine resources.

36 MATERIALS SCIENCE↗

Isothermal Microcalorimetry: Insight into the Impact of Crystallite Size and Agglomeration on the Lithiation of Magnetite, Fe 3 O 4

Magnetite, Fe 3 O 4 , holds significant interest as a Li-ion anode material because of its high theoretical capacity (926 mAh/g) associated with multiple electron transfers per cation center. Notably, both crystallite size and agglomeration influence ion transport. This report probes the effects of crystallite size (12 and 29 nm) and agglomeration on the reactions involved with the formation of the surface electrolyte interphase on Fe 3 O 4 . Isothermal microcalorimetry (IMC) was used here to determine the parasitic heat evolved during lithiation by considering the total heat measured, cell polarization, and entropic contributions. Interestingly, the 29 nm Fe 3 O 4 -based electrodes produced more parasitic heat than the 12 nm samples (1346 vs 1155 J/g). This observation was explored using scanning electron microscopy (SEM) and X-ray fluorescence (XRF) mapping in conjunction with spatially resolved X-ray absorption spectroscopy (XAS). SEM imaging of the electrodes revealed more agglomerates for the 12 nm material, affirmed by XRF maps. Further, XAS results suggest that Li + transport is more restricted for the smaller crystallite size (12 nm) material, attributed to its greater degree of agglomeration. These results rationalize the IMC data, where agglomerates of the 12 nm material limit solid electrolyte interphase formation and parasitic heat generation during lithiation of Fe 3 O 4 .

25 ENERGY STORAGE↗

Insights into Reactivity of Silicon Negative Electrodes: Analysis Using Isothermal Microcalorimetry

Silicon offers high theoretical capacity as a negative electrode material for lithium-ion batteries; however, high irreversible capacity upon initial cycling and poor cycle life have limited commercial adoption. Herein, we report an operando isothermal microcalorimetry (IMC) study of a model system containing lithium metal and silicon composite film electrodes during the first two cycles of (de)lithiation. The total heat flow data are analyzed in terms of polarization, entropic, and parasitic heat flow contributions to quantify and determine the onset of parasitic reactions. These parasitic reactions, which include solid–electrolyte interphase formation, contribute to electrochemical irreversibility. Cycle 1 lithiation demonstrates the highest thermal energy output at 1509 mWh/g, compared to cycle 1 delithiation and cycle 2. To complement the calorimetry, operando X-ray diffraction is used to track the phase evolution of silicon. During cycle 1 lithiation, crystalline Si undergoes transformation to amorphous lithiated silicon and ultimately to crystalline Li 15 Si 4 . The solid-state amorphization process is correlated to a decrease in entropic heat flow, suggesting that heat associated with the amorphization contributes significantly to the entropic heat flow term. In conclusion, this study effectively uses IMC to probe the parasitic reactions that occur during lithiation of a silicon electrode, demonstrating an approach that can be broadly applied to quantify parasitic reactions in other complex systems.

25 ENERGY STORAGE↗

The overlooked role of adsorption isotherms in electrocatalysis

Electrocatalysts enable the efficient interconversion of electrical and chemical energy for the sustainable production of fuels and chemicals. Here, in this Comment, we highlight the importance of developing electrochemical adsorption isotherms to demystify complex reaction mechanisms and rationalize catalytic activity.

electrocatalysis↗

Application of electron stimulated desorption techniques to measure the isotherm and the mean residence time of hydrogen physisorbed on a metal surface

Electron stimulated desorption techniques were applied to probe the density of H{sub 2} physisorbed on a cold surface. The adsorption isotherm of H{sub 2} on a copper surface was measured in the equilibrium pressure range between 10{sup −9} and 10{sup −4} Pa at surface temperatures of 6.5 and 4.2 K. The mean residence times of H{sub 2} on copper were obtained from the observation of the time development of the surface density in a transitional state approaching equilibrium, and are 50–500 s for the coverage between 1 and 0.18 at 4.2 K of the substrate temperature. The adsorption energies of 1.18–1.27 kJ/mol, and the condensation coefficient of 0.074–0.018 were also deduced.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗