Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INFRARED SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Infrared reflectance spectra (4-12 micron) of lunar samples

Presented here are infrared reflectance spectra of a typical set of Apollo samples to illustrate spectral character in the mid-infrared (4 to 12 microns) of lunar materials and how the spectra varies among three main forms: soil, breccia, and igneous rocks. Reflectance data, to a close approximation, are the inverse of emission spectra; thus, for a given material the spectral reflectance (R) at any given wavelength is related to emission (E) by 1 - R equals E. Therefore, one can use reflectance spectra of lunar samples to predict how emission spectra of material on the lunar surface will appear to spectrometers on orbiting spacecraft or earthbound telescopes. Spectra were measured in the lab in dry air using a Fourier Transform Infrared spectrometer. Shown here is only the key portion (4 to 12 microns) of each spectrum relating to the principal spectral emission region for sunlit lunar materials and to where the most diagnostic spectral features occur.

Nash, Douglas B.↗
NASA NTRS1993

The Mid-Infrared Transmission Spectra of Antarctic Ureilites

The mid-infrared (4000-450 1/cm; 2.5-22.2 micron) transmission spectra of seven Antarctic ureilites and 10 Antarctic H-5 ordinary chondrites are presented. The ureilite spectra show a number of absorption bands, the strongest of which is a wide, complex feature centered near 1000 1/cm (10 micron) due to Si-O stretching vibrations in silicates. The profiles and positions of the substructure in this feature indicate that Mg-rich olivines and pyroxenes are the main silicates responsible. The relative abundances of these two minerals, as inferred from the spectra, show substantial variation from meteorite to meteorite, but generally indicate olivine is the most abundant (olivine:pyroxene = 60:40 to 95:5). Both the predominance of olivine and the variable olivine-to-pyroxene ratio are consistent with the known composition and heterogeneity of ureilites. The H-5 ordinary chondrites spanned a range of weathering classes and were used to provide a means of addressing the extent to which the ureilite spectra may have been altered by weathering processes. It was found that, while weathering of these meteorites produces some weak bands due to the formation of small amounts of carbonates and hydrates, the profile of the main silicate feature has been little affected by Antarctic exposure in the meteorites studied here. The mid-infrared ureilite spectra provide an additional means of testing potential asteroidal parent bodies for the ureilites. At present, the best candidates include the subset of S-type asteroids having low albedos and weak absorption features in the near infrared.

Sandford, Scott A.↗
NASA NTRS2000

Thermal Emission Spectra of Phobos, Vesta, Ceres, and Pallas: A Comparison

Ultraviolet, visual, and near-infrared spectra of Phobos, obtained by Mariner 9 and Viking Orbiters, were interpreted to suggest a compositional similarity with carbonaceous chrondrites. Such a composition would be inconsistent with the moon's origin in the proto-Mars region, as Mars is composed chiefly of differentiated silicates. This interpretation was used to suggest that the moons originated in the main-asteroid belt, with subsequent capture and orbital evolution into their current locations. Interpretations of more recent visual and near-infrared spectra, obtained by Phobos-2 and Mars Pathfinder, have demonstrated that the Phobos spectrum is more similar to spectra of other classes of asteroids and lunar soils. If lunar mare soil is the correct analogy, then such a composition suggests a formation of Phobos from materials similar to that on Mars, i.e. basalts, and would not require a dynamically difficult capture and orbital evolution. During the science phasing orbits of the Mars Global Surveyor mission Thermal Emission Spectrometer (TES) observations of Phobos were acquired at each of four encounters. The spectral variability observed for localized surface regions on Phobos has been previously reported and is greatest near the northern wall of Stickney crater. Interpretation of the thermal infrared spectra of airless bodies, based upon most existing laboratory measurements, is complicated by the absence of interstitial gases on the celestial objects that would act to minimize potential thermal gradients in the upper layers of the surface. As an aid to interpretation of the TES Phobos spectra are compared to telescopic and airborne thermal infrared spectra of asteroids from several classes, including Ceres (G), Pallas (B), and Vesta (V). The asteroid spectra provide a direct analogy to the physical situation encountered at the surface of Phobos, albeit different thermal gradients may exist for each surface. This work is supported by NASA RTOP's 344-30-30-01 and 344-34-21-08.

Roush, Ted↗
NASA NTRS1983

Far-infrared reflectance spectra of optical black coatings

Far-infrared specular reflectance spectra of six optically black coatings near normal incidence are presented. The spectra were obtained using nine bandpass transmission filters in the wavelength range between 12 and 300 microns. Data on the construction, thickness, and rms surface roughness of the coatings are also presented. The chemical composition of two coatings can be distinguished from that of the others by a strong absorption feature between 20 and 40 microns which is attributed to amorphous silicate material. Inverse relationships between these spectra and coating roughness and thickness are noted and lead to development of a reflecting-layer model for the measured reflectance. The model is applied to the spectra of several coatings whose construction falls within its constraints.

Smith, S. M.↗
NASA NTRS1980

Infrared reflectance spectra of asteroids - A search for water of hydration

Infrared reflectance spectra have shown the presence of an absorption feature in the 3-4 micron region for seven C and U asteroids. By comparison with laboratory spectra of terrestrial silicates and meteorites, it is concluded that this band is probably due to water in the form of hydrated salts and silicates (clay minerals), implying that the surface material of these asteroids may be analogous to the CI and CM carbonaceous chondritic meteorites. The presence of other hydrated minerals, however, cannot be ruled out. The depths of the water bands in the spectra vary from asteroid to asteroid, though no asteroid spectrum shows a band as deep as was detected on 1 Ceres. On four other C asteroids, no water band was detected. The implications of these observations for the mineralogy of these asteroids are discussed

Lebofsky, L. A.↗
NASA NTRS1996

Stratospheric Observations of CH3D and HDO from ATMOS Infrared Solar Spectra: Enrichments of Deuterium in Methane and Implications for HD

Stratospheric mixing ratios of CH3D from 100 mb to 17mb (approximately equals 15 to 28 km)and HDO from 100 mb to 10 mb (approximately equals 15 to 32 km) have been inferred from high resolution solar occultation infrared spectra from the Atmospheric Trace MOlecule Spectroscopy (ATMOS) Fourier-transform interferometer. The spectra, taken on board the Space Shuttle during the Spacelab 3 and ATLAS-1, -2, and -3 missions, extend in latitude from 70 deg S to 65 deg N. We find CH3D entering the stratosphere at an average mixing ratio of (9.9 +/- 0.8) x 10(exp -10) with a D/H ratio in methane (7.1 +/- 7.4)% less than that in Standard Mean Ocean Water (SMOW) (1 sigma combined precision and systematic error). In the mid to lower stratosphere, the average lifetime of CH3D is found to be (1.19 +/- 0.02) times that of CH4, resulting in an increasing D/H ratio in methane as air 'ages' and the methane mixing ratio decreases. We find an average of (1.0 +/- 0.1) molecules of stratospheric HDO are produced for each CH3D destroyed (1 sigma combined precision and systematic error), indicating that the rate of HDO production is approximately equal to the rate of CH3D destruction. Assuming negligible amounts of deuterium in species other than HDO, CH3D and HD, this limits the possible change in the stratospheric HD mixing ratio below about 10 mb to be +/- 0.1 molecules HD created per molecule CH3D destroyed.

Irion, F. W.↗
NASA NTRS1986

Detection of 12 micron Mg I and OH lines in stellar spectra

Infrared lines of Mg I and OH have been detected in stellar spectra near 12.3 microns. The Mg I 7i-6h transition was seen in Alpha Ori and Alpha Tau, and the R2e(23.5) and R1f(24.5) transitions of OH were seen in Alpha Ori. All lines appear in absorption, in contrast to the solar spectrum where the Mg I line shows a prominent emission core. The lack of emission in these low surface gravity stars is due to a greatly reduced volume recombination rate for the high-n states of Mg I, which is not fully compensated by the increased chromospheric scale height. The OH equivalent widths are sensitive to the temperature structure of the upper photosphere of Alpha Ori, and they indicate that the photosphere near tau 5000 of about 10 to the -5th is approximately 100 K hotter than is given by flux constant models. The OH measurements agree more closely with the 1981 semiemprical model of Basri, Linsky, and Eriksson (1981), which is based on Ca II and Mg II ultraviolet features.

Jennings, D. E.↗
NASA NTRS1983

Laboratory studies at high resolution of the infrared absorption spectra of a number of gases found in planetary atmospheres

The infrared absorption spectra of a number of gases found in planetary atmospheres were studied at high resolution. Absorption line measurements which can be of value for the interpretation of planetary spectra in terms of molecular abundances and conditions in the planetary atmospheres were provided. The high resolution spectra have yielded measurements of individual vibration rotation line parameters including positions, strengths, pressure broadened widths and, where assignments were unknown, the temperature sensitivity of the strengths. Such information allows the determinations of the absorption of a given molecular gas under planetary conditions of temperature and pressure and at the same time it provides the data necessary if the spectra are to be understood in terms of basic molecular theory. Thus this work has included spectral analysis in the form of line assignments as well as fitting of the data to Hamiltonian models. Such fitting is very useful in that it helps to confirm and extend the assignments.

Hunt, R. H.↗
NASA NTRS1986

Quantification of HCl from high-resolution, ground-based, infrared solar spectra in the 3000 per cm region

Recent ground-based infrared solar spectra at 0.02 per cm resolution in the 3000 per cm region have been analyzed for the atmospheric content of HCl. Nonlinear spectral least-squares fitting applied to spectra obtained at several zenith angles shows little sensitivity of the results to tropospheric HCl but provides an accurate measurement of the total column amount.

Goldman, A.↗
NASA NTRS2010

TPSAS-NF1676L-10761-DND

The presentation summarizes the NASA CLARREO mission to observe decadal climate change using high accuracy SI traceable reflected solar spectra, infrared emission spectra, and radio occultation from the Earth.

Bruce A Wielicki↗
NASA NTRS1987

Quantification of HCl from High Resolution Infrared Solar Spectra Obtained at the South Pole in December 1986

Ground-based infrared solar spectra at 0.02/ cm resolution obtained at the Amundsen-Scott South Pole station in December 1986 have been analysed for the atmospheric content of HCl. Nonlinear least-squares spectral fitting applied to the spectra yields a total HCl column amount of (6.4 +/- 0.8) x 10(exp 15) molec/sq cm, most being stratospheric. This amount is larger than that extrapolated from earlier results on the latitudinal distribution of atmospheric HCl.

Goldman, A.↗
NASA NTRS1993

Near-surface temperature gradients and their effects on thermal-infrared emission spectra of particulate planetary surfaces

The infrared energy emitted from a planetary surface is generated within a finite depth determined by the material's absorption skin depth. This parameter varies significantly with wavelength in the infrared but has an average value of around 50 microns for most geologic materials. In solid rock, heat transfer is efficient enough so that this 50 micron zone of the near surface from which the radiation emanates will be more or less isothermal. In particulate materials, however, heat transfer is more complicated and occurs via a combination of mechanisms, including solid conduction within grains and across grain contacts, conduction through the interstitial gas, and thermal radiation within individual particles and across the void spaces in between grains. On planets with substantial atmospheres, the gas component dominates the heat transfer and tends to mitigate near-surface thermal gradients. However, on airless bodies, the gas component is absent and heat transfer occurs via solid conductions and radiation. If the particles are small relative to the average absorption skin depth, then the top 50-100 microns or so of the surface will be cooled by radiation to space allowing the creation of significant near-surface thermal gradients. In those regions of the spectrum where the absorption coefficient is low, the emission will come from the deeper, warmer parts of the medium, whereas in regions of high absorption, the emission will emanate from shallower, cooler parts of the medium. The resulting emission spectrum will show non-compositional features as a result of the thermal structure in the material. We have modeled the heat transfer in a particulate medium in order to determine the magnitude of near-surface thermal gradients for surfaces on airless bodies and on Mars. We use the calculated thermal structure to determine the effects it has on the infrared emission spectrum of the surface.

Henderson, B. G.↗
NASA NTRS1995

Ozone vertical distribution retrieval from ground-based high resolution infrared solar spectra

A practical procedure for the retrieval of ozone vertical profiles from ground-based high resolution Fourier transform infrared solar spectra has been developed. The analysis is based on a multilayer line-by-line forward model and a semi-empirical version of the optimal estimation inversion method of Rodgers. The 1002.6-1003.2 cm(exp -1) spectral interval has been selected for the analysis on the basis of synthetic spectrum calculations. This interval contains numerous ozone lines covering a range of intensities and providing retrieval sensitivity from ground level to about 35 km. Characterization of the method and an error analysis have been performed. For a spectral resolution of 0.05-0.01 cm(exp -1) and a signal-to-noise ratio greater than or equal to 100 the retrieval is stable with a vertical resolution of approximately 5 km attainable near the surface degrading to approximately 10 km in the stratosphere. Synthetic spectra studies show that the a priori profile and weak constraints selected for the retrievals introduce no significant biases for a wide range of ozone profiles.

Pougatchev, N. S.↗
NASA NTRS1986

Mid-infrared reflectlance spectra (2.3-22 micions) of sulfur, gold, KBr, MgO, and halon

Biconical diffuse reflectance spectra in the mid-infrared are presented for powder and other solid forms of sulfur, gold, potassium bromide, magnesium oxide, and halon. Comparisons are made with previously published results of other investigators, and recommendations are made regarding the relative usefulnees of these materials as reflectance standards in the mid-IR. Sulfur has strong intrinsic bands at wavelengths greater than 7 microns that must be taken into account for its use as a reflectance standard. Some sulfur samples have hydrocarbon contaminants and in powder form may have adsorbed water, both of which produce bands in the 3-4-micron region. Potassium bromide has several weak intrinsic bands and is very sensitive to adsorbed water contamination; otherwise it is a good IR reference material. Magnesium oxide and halon have major bands structure and low reflectivity at wavelengths greater than 2.6 microns and thus are unsuitable as reference materials in the mid-IR. Vapor-deposited gold on fine sandpaper (600 grit) is very bright, spectrally flat, and fairly diffuse, so it is the superior material (of those examined) for reflectance reference material throughout the IR. Fine gold powder, on the other hand, is much less bright than evaporated gold, and its reflectivity at wavelengths greater than its particle size is highly sensitive to particle packing density.

Nash, D. B.↗
NASA NTRS1991

Infrared reflectance spectra (2.2-15 microns) of plagioclase feldspars

Laboratory results show that (1) the Christiansen frequency (CF) feature in mid-infrared reflectance spectra of powders can be used to accurately distinguish plagioclase composition, and (2) the wavelength position of the CF is not affected by vitrification of the plagioclase. Although the CF position does not distinguish glass from crystalline forms of plagioclase, other features (combination-tone, overtone, restrahlen bands) in the mid-IR spectra of plagioclase can be used for that purpose. These results have important implications for application of thermal emission spectroscopy to mapping the surface composition of regolith-covered planetary bodies like the moon, Mars, and asteroids.

Nash, Douglas B.↗
NASA NTRS1981

Recent results in the analysis of high-resolution infrared atmospheric transmission spectra

Long path atmospheric infrared spectra at 0.02 per cm resolution, as obtained by the University of Denver from balloon experiments will be presented. The spectra will be analysed in terms of quantifying atmospheric trace constituents. Identification of new atmospheric spectral lines will be demonstrated. Spectral regions which require further experimental and theoretical work for more accurate modeling of atmospheric transmission will be discussed.

Goldman, A.↗
NASA NTRS1999

Collaborative Study of Analysis of High Resolution Infrared Atmospheric Spectra Between NASA Langley Research Center and the University of Denver

The Langley-D.U. collaboration on the analysis of high resolution infrared atmospheric spectra covered a number of important studies of trace gases identification and quantification from field spectra, and spectral line parameters analysis. The collaborative work included: Quantification and monitoring of trace gases from ground-based spectra available from various locations and seasons and from balloon flights. Studies toward identification and quantification of isotopic species, mostly oxygen and Sulfur isotopes. Search for new species on the available spectra. Update of spectroscopic line parameters, by combining laboratory and atmospheric spectra with theoretical spectroscopy methods. Study of trends of atmosphere trace constituents. Algorithms developments, retrievals intercomparisons and automatization of the analysis of NDSC spectra, for both column amounts and vertical profiles.

Goldman, Aaron↗