Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydrodynamics experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

The M-band transmission flux of the plastic foil with a coated layer of silicon or germanium

Silicon (Si) and Germanium (Ge) can be used as the dopant in the ablator material for the purpose of reducing preheating in indirect-drive inertial confinement fusion. Their performances in reducing preheating are quite different. A method to evaluate the difference of these two kinds of dopants has been presented in this letter. In the Shenguang-II high power laser facility, the M-band (1.6–4.4 keV) transmission flux of Si-coated plastic (CH) and Ge-coated plastic (CH) has been measured by using the M-band x-ray diode. In the experiment, we find that the Si-coated CH can absorb more M-band x-rays and thus reduce the preheating of the fuel in our experiment condition. By using the radiation hydrodynamic code MULTI-1D, we got the simulation result which was well suited for the experiment. The comparison of their opacities (T{sub e} = 60–100 eV and ρ = 0.1–0.5 g/cm{sup 3}) also shows that the opacity of Si is higher than that of Ge almost in the whole range of 1.6–4.4 keV.

36 MATERIALS SCIENCE↗

Experiments on the stability of various water-lubricated fixed geometry hydrodynamic journal bearings at zero load

Hydrodynamic journal bearing stability tests were conducted with 1.5 in. diameter, 1.5 in. long fixed geometry bearings in water at 80 F with zero load. Five fixed geometry bearings were rated in order of diminishing stability as follows: (1) three-tilted-lobe bearing (offset factor of 1.0), (2) herringbone-groove bearing, (3) one-segment, three-pod, shrouded Rayleigh-step bearing, (4) three-tilted-lobe journal with axial grooves (offset factor of 1.0) mated with a plain bearing, and (5) three-centrally-lobed bearing with axial grooves (offset factor of 0.5). The various parameters that affect the stability of each bearing configuration were investigated.

Schuller, F. T.↗

Interfacial and Hydrodynamic Behavior of Thin Spherical Bubbles of Smectic Liquid Crystal in Microgravity

The Observation and Analysis of Smectic Islands in Space (OASIS) project comprises a series of experiments that probe the interfacial and hydrodynamic behavior of thin spherical bubbles of smectic liquid crystal in microgravity. Smectic films are the thinnest known structures formed of condensed phases, making them ideal for studies of two-dimensional (2D) coarsening dynamics and thermocapillary phenomena. The OASIS flight hardware was launched on SpaceX-6 in April 2015 and experiments were carried out on the International Space Station using four different smectic A and C liquid crystal materials in separate sample chambers. We will describe the behavior of collective island dynamics on the bubbles, including temperature-gradient-induced thermomigration, 2D Rayleigh-Plateau Instability, Oswald ripening dynamics, the single and multiple island diffusion on the curved surface and coalescence-driven coarsening dynamics of island emulsions in microgravity. On Earth, such island emulsions would rapidly sediment to the bottom of the bubble and coalesce, but in microgravity, coarsening of the emulsion can be observed free of gravitational effects.

liquid crystal↗

Theory of macroscopic fluctuations in systems of particles, interacting with hydrodynamic and gaslike media

Our work offers a stochastic approach for description of long wave fluctuations in systems of particles interacting with hydrodynamic media. The approach is based on the averaging of nonlinear dynamic equations over random initial conditions for these equations. Random character of the initial conditions for motion equations causes the development of long wave fluctuations of description parameters in the system. Within the framework of our approach we derived evolution equations of long wale fluctuations in the system for both fluctuation-kinetic and fluctuation-hydrodynamic stages of evolution. We also found the class of description parameter transformations which does not change the dynamic equation structure. Dynamics of pair correlations has been studied. The 'long hydrodynamic tails' theory for system of particles interacting with the hydrodynamic medium has been built. The system considered can be a model of neutron transport in hydrodynamic media without their multiplication and capture. The possibility of usage of our results for experimental evidence of long hydrodynamic tails in neutron scattering experiments is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

LLNL ICF highlights for the period of July 14, 2016 to July 20, 2016

LLNL executed two HED Fused Silica Dome experiments as part of the complex hydrodynamics campaign on NIF. These shots assessed breakout times and velocities of shocks at five different angles separated by 45°. Each target looked at three different locations on the capsule measuring the shock breakout time and speed. The experiments used a significantly larger hohlraum and energy in the laser pulse than in previous complex hydrodynamics hohlraums. LLNL conducted a shot on NIF to continue developing a high pressure drive platform for Rayleigh-Taylor strength experiments. VISAR was the primary diagnostic and returned good quality data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-Phase Flow in Packed Beds, Filters and Orifices: Summary of Findings of the Packed Bed Reactor Experiment Onboard of the International Space Station

Understanding the hydrodynamics of adiabatic two-phase flows in packed bed reactors enables the optimization of chemical reaction rates and products that crucial in pharmaceuticals and energy production industries. Additionally, this understanding aids in designing more efficient and compact reactors and reducing space and resource requirements. Insights gained from studying and understanding such flows in microgravity contribute to advancements of space technologies and the enhancement of our capabilities for undertaking future long duration safe, and sustainable space exploration missions. The objective of the Packed Bed Reactor Experiment series (PBRE and PBRE-2) was to develop a fundamental understanding of the hydrodynamics of adiabatic two-phase flows through porous media in microgravity. This work provides a description of the PBRE fluid system and presents the highlights of the PBRE and PBRE-2 previously flown with different packings and operated onboard of the International Space Station Microgravity Science Glovebox (ISS-MSG). These highlights include flow patterns and two-phase pressure drop, and the impact of capillary effects on pressure drop at various gas and liquid flow rates. This work also presents preliminary results from the Packed Bed Reactor Experiment-Water Recovery Series (PBRE-WRS) recently flown with filters and orifices, which was also operated on the ISS-MSG. The objective of the experiment is to validate hydrodynamic models at a range of gas and liquid flow rates pertinent to the operation of these test articles. The microgravity environment allows for measurement and observation of aspects of fluid dynamics that are unique when compared to observations made in full or partial gravity environments.

ISS↗

Laser–plasma interactions in direct-drive ignition plasmas

Direct-drive ignition is most susceptible to multiple-beam laser–plasma instabilities, as the single-beam intensities are low (I s ~ 10 14 Wcm -2 ) and the electron temperature in the underdense plasma is high (Te 3.5 keV). Cross-beam energy transfer is driven by multiple laser beams and can significantly reduce the hydrodynamic efficiency in direct-drive experiments on OMEGA (Boehly et al 1997 Opt. Commun. 133 495). Reducing the radii of the laser beams significantly increases the hydrodynamic efficiency at the cost of an increase in the low-mode modulations. Initial 2D hydrodynamic simulations indicate that zooming, transitioning the laser–beam radius prior to the main drive, does not increase low-mode nonuniformities. The combination of zooming and dynamic bandwidth reduction will provide a 30% effective increase in the drive energy on OMEGA direct-drive implosions. It was shown that two-plasmon decay (TPD) can be driven by multiple laser beams and both planar and spherical experiments were performed to study the hot electrons generated by TPD. The fraction of laser energy converted to hot electrons scales with the hot-electron temperature for all geometries and over a wide range of intensities. At ignition-relevant intensities, the fraction of laser energy converted to hot electrons is measured to decrease by an order of magnitude when the ablator material is changed from carbon–hydrogen to aluminum. Finally, the TPD results are compared with a multiple-beam linear theory and a nonlinear Zakharov model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of mix at the fuel–ablator interface in indirectly driven capsule implosions on the National Ignition Facility

The interface between the capsule ablator and fuel ice layer is susceptible to hydrodynamic instabilities. The subsequent mixing of hot ablator material into the ice reduces fuel compression at stagnation and is a candidate for reduced capsule performance. The ability to diagnose ice–ablator mix is critical to understanding and improving stability at this interface. Combining the crystal backlighter imager with the single line of sight camera on the National Ignition Facility (NIF) allows direct measurement of ice–ablator mix by providing multiple quasi-monochromatic radiographs of layered capsule implosions per experiment with high spatial (∼12 μm) and temporal (∼35 ps) resolution. The narrow bandwidth of this diagnostic platform allows radiography of the inner edge of the capsule limb close to stagnation without capsule self-emission contaminating the data and removes opacity uncertainties typically associated with the spectral content of the radiograph. Analysis of radiographic data via a parameterized forward-fitting Abel inversion technique provides measurements of the distribution of mix mass inwards from the ice–ablator interface. The sensitivity of this mix measurement technique was demonstrated by applying it to layered experiments in which the stability of the ice–ablator interface was expected to vary significantly. Additional experiments suggest that high-density carbon capsules that employ a buried-layer dopant profile suffer from mixing at the innermost doped–undoped interface. Data from these experiments suggest that opacity models used in hydrodynamic simulations of NIF experiments can potentially over-predict the opacity of doped capsules. LLNL-JRNL-850535-DRAFT.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Liquid contact resonance atomic force microscopy via experimental reconstruction of the hydrodynamic function

We present a method to correct for surface-coupled inertial and viscous fluid loading forces in contact resonance (CR) atomic force microscopy (AFM) experiments performed in liquid. Based on analytical hydrodynamic theory, the method relies on experimental measurements of the AFM cantilever's free resonance peaks near the sample surface. The free resonance frequencies and quality factors in both air and liquid allow reconstruction of a continuous hydrodynamic function that can be used to adjust the CR data in liquid. Validation experiments utilizing thermally excited free and in-contact spectra were performed to assess the accuracy of our approach. Results show that the method recovers the air frequency values within approximately 6%. Knowledge of fluid loading forces allows current CR analysis techniques formulated for use in air and vacuum environments to be applied to liquid environments. Our technique greatly extends the range of measurement environments available to CR-AFM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The National Ignition Facility: Ushering in a new age for high energy density science

The National Ignition Facility (NIF) [E. I. Moses, J. Phys.: Conf. Ser. 112, 012003 (2008); https://lasers.llnl.gov/], completed in March 2009, is the highest energy laser ever constructed. The high temperatures and densities achievable at NIF will enable a number of experiments in inertial confinement fusion and stockpile stewardship, as well as access to new regimes in a variety of experiments relevant to x-ray astronomy, laser-plasma interactions, hydrodynamic instabilities, nuclear astrophysics, and planetary science. The experiments will impact research on black holes and other accreting objects, the understanding of stellar evolution and explosions, nuclear reactions in dense plasmas relevant to stellar nucleosynthesis, properties of warm dense matter in planetary interiors, molecular cloud dynamics and star formation, and fusion energy generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray spectroscopy of planar laser-plasma interaction experiments at the National Ignition Facility

X-ray spectroscopy has been newly used to diagnose electron temperatures in planar-geometry experiments at the National Ignition Facility (NIF) designed to study laser-plasma interactions at plasma conditions relevant to direct-drive ignition. These experiments used a buried co-mixed Mn/Co microstrip in a CH ablator in experiments that generated long scale-length plasmas susceptible to stimulated Raman scattering (SRS). Time-resolved Mn and Co K-shell spectra, diagnosed using the NIF x-ray spectrometer, were analyzed by fi tting to synthetic spectra based on a detailed atomic model of emission from the microstrip. The electron temperature at the time when the microstrip passes through the quarter-critical density surface, the key region for the development of SRS, was inferred to be around 2 to 3 keV. These measurements constrain 2-D DRACO radiation-hydrodynamics modeling of the planar experiments, important for determining plasma conditions pertinent to SRS, and demonstrate that this platform approaches direct-drive ignition-relevant conditions. The modeling is also assessed by a direct comparison of measured spectra to modeled spectra generated by DRACO in conjunction with the atomic physics postprocessor code SPECT3D.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of hypervelocity projectile impact on thick metal plates

Hypervelocity impacts generate extreme pressure and shock waves in impacted targets that undergo severe localized deformation within a few microseconds. These impact experiments pose unique challenges in terms of obtaining accurate measurements. Similarly, simulating these experiments is not straightforward. This paper proposed an approach to experimentally measure the velocity of the back surface of an A36 steel plate impacted by a projectile. All experiments used a combination of a two-stage light-gas gun and the photonic Doppler velocimetry (PDV) technique. The experimental data were used to benchmark and verify computational studies. Two different finite-element methods were used to simulate the experiments: Lagrangian-based smooth particle hydrodynamics (SPH) and Eulerian-based hydrocode. Both codes used the Johnson-Cook material model and the Mie-Grüneisen equation of state. Experiments and simulations were compared based on the physical damage area and the back surface velocity. Finally, the results of this study showed that the proposed simulation approaches could be used to reduce the need for expensive experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Go with the Radflow: Thermal radiation experiments in the high energy-density regime [Slides]

Los Alamos National Laboratory is a nuclear weapons laboratory supporting our nation's defense. In support of the mission is a high energy-density physics program in which we design and execute experiments to study radiation-hydrodynamics phenomena and improve the predictive capability of our large-scale multi-physics software codes on our supercomputers. The Radflow Project is maturing a unique spectroscopic measurement that yields a spatially dependent supersonic radiation wavefront profile. The spectroscopic measurement is much more constraining than the typically used radiography, which measures the density changes due to the shock as the radiation wave goes subsonic. Recently, the spectroscopic measurement has been applied to advanced targets with a detailed heterogeneity representing a single realization of a stochastic medium. The Radflow Project also conducts opacity experiments to explain the current conundrum of the experimental iron opacity differing from theory, which is important in modeling the sun. More than that, though, we need to be able to answer these science questions and be able to validate our theory and codes.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Density evolution after shock release from laser-driven polystyrene (CH) targets in inertial confinement fusion

The evolution of the plasma density in the rarefaction wave formed after a laser-driven shock is released from a CH foil was measured using optical interferometry. Here, it was found that the plasma density profile is very sensitive to the conditions at the back surface of the foil before the shock release. Dedicated experiments demonstrated that radiation preheat by coronal x-rays caused early expansion of the back surface and faster expansion of the rarefaction wave. Radiation-hydrodynamics simulations with accurate modeling of radiation preheat from the plasma corona are in good agreement with the experimental results. The early expansion of material interfaces due to coronal x-ray preheat must be evaluated in designing and interpreting laser-driven inertial confinement fusion experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conceptual design for spacelab pool boiling experiment

A pool boiling heat transfer experiment to be incorporated with a larger two-phase flow experiment on Spacelab was designed to confirm (or alter) the results of earth-normal gravity experiments which indicate that the hydrodynamic peak and minimum pool boiling heat fluxes vanish at very low gravity. Twelve small sealed test cells containing water, methanol or Freon 113 and cylindrical heaters of various sizes are to be built. Each cell will be subjected to one or more 45 sec tests in which the surface heat flux on the heaters is increased linearly until the surface temperature reaches a limiting value of 500 C. The entire boiling process will be photographed in slow-motion. Boiling curves will be constructed from thermocouple and electric input data, for comparison with the motion picture records. The conduct of the experiment will require no more than a few hours of operator time.

Lienhard, J. H.↗