Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Altitude Aircraft”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Measurements of CF2Cl2, CFCl3, and N2O in the lower stratosphere between 2 deg S and 73 deg N latitude

Mixing ratios are presented for CF2Cl2, CFCl3, and N2O in the lower stratosphere. They are derived from measurements made on samples collected by a high-altitude aircraft during a survey in the northern hemisphere in the summer of 1977. The vertical distributions of the mixing ratios of these species show a decrease with increasing altitude and a marked decrease at a given altitude with increasing latitude from 2 deg S to 73 deg N latitude. These results agree with measurements at similar latitudes in the fall of 1976 and with results of other experiments. The experimental apparatus and procedures are described in greater detail than in previous papers.

Vedder, J. F.↗
NASA NTRS1981

Spectroscopic detection of stratospheric hydrogen cyanide

A number of features have been identified as absorption lines of hydrogen cyanide in infrared spectra of stratospheric absorption obtained from a high-altitude aircraft. Column amounts of stratospheric hydrogen cyanide have been derived from spectra recorded on eight flights. The average vertical column amount above 12 kilometers is 7.1 + or - 0.8 x 10 to the 14th molecules per square centimeter, corresponding to an average mixing ratio of 170 parts per trillion by volume.

Coffey, M. T.↗
NASA NTRS1982

The use of Landsat-3 thermal data to help differentiate land covers

Landsat-3 Multispectral Scanner Subsystem (MSS) digital data of the Baltimore, Maryland area gathered on May 24, 1978, are examined to show the usefulness of thermal data in providing better discrimination between agricultural and residential areas, certain types of urban/industrial areas and water, cloud shadows and water, and bare-extractive areas and bright urban cover types. High altitude aircraft imagery taken on May 3, 1978, provides ground truth and training site verification. Two classifications are made for each training site: the initial one using bands 4, 5, and 7 and a second in which the thermal data are included with the visible and near infrared data. This permits a direct comparison of areas spectrally similar with and without the inclusion of the thermal data. Commission errors determined from selected subsets of the data show reductions of 95% for the urban/industrial versus water themes, 84% for the residential versus agriculture themes, 64.0% for the bare-extractive versus bright urban themes, and 24% for the cloud shadow versus water themes when the thermal data are included in the signature.

Ormsby, J. P.↗
NASA NTRS1982

Investigation of a low NOx full-scale annular combustor

An atmospheric test program was conducted to evaluate a low NOx annular combustor concept suitable for a supersonic, high-altitude aircraft application. The lean premixed combustor, known as the vortex air blast (VAB) concept, was tested as a 22.0-cm diameter model in the early development phases to arrive at basic design and performance criteria. Final demonstration testing was carried out on a full scale combustor of 0.66-m diameter. Variable geometry dilution ports were incorporated to allow operation of the combustor across the range of conditions between idle (T(in) = 422 K, T(out) = 917 K) and cruise (T(in) = 833 K, T(out) - 1778 K). Test results show that the design could meet the program NOx goal of 1.0 g NO2/kg fuel at a one-atmospheric simulated cruise condition.

Source record↗
NASA NTRS1982

LANDSAT 4 investigations of thematic mapper and multispectral scanner applications

Initial data screening, data handling and program testing were completed on the four-band Detroit scene and the seven-band northeast Arkansas scene. Data were received in early December for one primary eastern test site (Washington, D.C.) and one secondary eastern test site (Allegheny National Forest). A comprehensive digital data base was built for a portion of the Black Hills test site and is composed of historic LANDSAT MSS data; elevation, slope, and aspect data; land cover data; geologic data; thematic mapper simulator data; and digitized high altitude aircraft data. The thematic mapper and multispectral scanner data of the Washington area were resampled at 25 and 50 meters respectively, with map projection to UTM grid.

Lauer, D. T.↗
NASA NTRS1981

Remote sensing for forest applications in New York: Two case studies

Under-utilized forest resources in the Northeast can supply fiber to new markets. Information on forest resources, however, is often too aggregated to estimate available woody material with sufficient detail for planning specific projects. Over the past year, staff of Cornell University's Remote Sensing Program, under a grant from NASA, assisted New York State agency personnel by assessing available woody material for two potential development projects, a wood-fired power plant and a particle board manufacturing plant. These feasibility studies are reviewed, illustrating how information derived from high-altitude aircraft photographs, LANDSAT imagery, and available supporting data were integrated to arrive at estimates of woody material.

Stanturf, J. A.↗
NASA NTRS1982

Atmospheric effects on radiation reflected from soil and vegetation as measured by orbital sensors using various scanning directions

Ground-measured spectral reflectance data for Avondale loam and drought-stressed and unstressed wheat were converted into digital counts for spectral bands 5 and 7 of the Landsat Multispectral Scanner System (MSS). For dry loam, the differences between ratios of MSS bands 7-5 as determined from space and from ground level measurements were 2.3 percent for clear and 5.6 percent for turbid atmospheric conditions. By contrast, for wet loam the differences were 10.4 and 29.5 percent. It is found that atmospheric conditions may cause a delay of from 3 to 7 days in the discrimination between drought-stressed and unstressed wheat. For oblique angle observations the atmospheric modification of ground-measured reflectances increased with angle at a greater rate in the 0/180 deg azimuth than in the 90/270 deg azimuth. Implications of this result are discussed for oblique angle Systeme Probatoire d'Observation de la Terre (SPOT), Mapsat, future multispectral linear array system imagery, and wide-angle imagery collected from scanners in high-altitude aircraft.

Slater, P. N.↗
NASA NTRS1982

Classification of the Johnson Space Center stratospheric dust collection

Data on the nature of dust in the upper atmosphere have been provided by a stratospheric dust collection program. This program makes it possible to study in detail materials related to early solar system history. A comprehensive overview of the stratospheric collection program provides a basis for a better understanding of stratospheric dust origins. It is important for the development of this understanding that easily accessible criteria for classification be established. The present investigation is concerned with the development of a suitable classification scheme for the obtained stratospheric materials. Three sets of eight collectors were flown on WB57 high-altitude aircraft during August and September, 1981, as part of the considered collection program. Three of the 24 impactors (flags) have undergone preliminary examination. The current investigation is concerned with selected data on materials from flags W7010, W7017, and W7029.

Mackinnon, I. D. R.↗
NASA NTRS1984

The effect of spatial, spectral and radiometric factors on classification accuracy using thematic mapper data

An experiment of a factorial design was conducted to test the effects on classification accuracy of land cover types due to the improved spatial, spectral and radiometric characteristics of the Thematic Mapper (TM) in comparison to the Multispectral Scanner (MSS). High altitude aircraft scanner data from the Airborne Thematic Mapper instrument was acquired over central California in August, 1983 and used to simulate Thematic Mapper data as well as all combinations of the three characteristics for eight data sets in all. Results for the training sites (field center pixels) showed better classification accuracies for MSS spatial resolution, TM spectral bands and TM radiometry in order of importance.

Wrigley, R. C.↗
NASA NTRS1984

The effect of spatial, spectral and radiometric factors on classification accuracy using Thematic Mapper data

An experiment of a factorial design was conducted to test the effects on classification accuracy of land cover types due to the improved spatial, spectral and radiometric characteristics of the LANDSAT Thematic Mapper (TM) in comparison to the Multispectral Scanner (MSS). High altitude aircraft scanner data from the Airborne Thematic Mapper instrument was used to simulate TM data as well as all combinations of the three characteristics for eight data sets in all. Results for the training sites (field-center pixels) show better classification accuracies for MSS spatial resolution, TM spectral bands and TM radiometry in order of importance.

Wrigley, R. C.↗
NASA NTRS1983

The structure and phase of cloud tops as observed by polarization lidar

High-resolution observations of the structure of cloud tops have been obtained with polarization lidar operated from a high altitude aircraft. Case studies of measurements acquired from cumuliform cloud systems are presented, two from September 1979 observations in the area of Florida and adjacent waters and a third during the May 1981 CCOPE experiment in southeast Montana. Accurate cloud top height structure and relative density of hydrometers are obtained from the lidar return signal intensity. Correlation between the signal return intensity and active updrafts was noted. Thin cirrus overlying developing turrets was observed in some cases. Typical values of the observed backscatter cross section were 0.1-5 (km/sr) for cumulonimbus tops. The depolarization ratio of the lidar signals was a function of the thermodynamic phase of cloud top areas. An increase of the cloud top depolarization with decreasing temperature was found for temperatures above and below -40 C.

Spinhirne, J. D.↗
NASA NTRS1983

Synthetic aperture radar observation of ocean roughness from rolls in an unstable marine boundary layer

Simultaneous synthetic aperture radar (SAR) and cloud photographic observations of the Atlantic Ocean off the coast of Florida were made from a high-altitude aircraft when there was an unstable marine boundary layer. The synthetic aperture radar images show unusual kilometer-sized features on the ocean surface which are related to clouds. The ocean near shore was cloud-free and had no radar features, while from 30 to 330 km offshore there were clouds and prominent kilometer-sized features in the SAR image. These radar features are most prominent when the radar was looking upwind, are less prominent when the radar was looking downwind, and disappear entirely when the radar was looking crosswind. Since ocean radar echo strengths are believed to be controlled primarily by ocean waves satisfying the Bragg relation, these radar features most likely resulted from local enhancements of short gravity waves with 17- to 34-cm wavelengths, which in turn are surface expressions of roll convections in a kilometer-thick unstable marine boundary layer.

Thompson, T. W.↗
NASA NTRS1983

Measurements of stratospheric SO2 after the EL Chichon eruptions

Samples of stratospheric trace gases were obtained on eight flights of NASA high-altitude aircraft from April 16 through December 13, 1982. The sampling occurred at altitudes from 15 to 22 km, latitudes from 23 to 52 deg N, and longitudes from 108 to 130 deg W. The cryogenically concentrated samples were analyzed by gas chromatography for SO2, a primary precursor of the gas-to-particle conversion process. The measured mixing ratio of SO2 varied between 8 and 132 pptv. Evidence from aerosol measurements indicates that a few of our early samples may have been collected in the fringes of the volcanic cloud from El Chichon. Samples obtained on some later flights may have been from the eruption cloud but were taken at times when most of the volcanically injected SO2 should have been converted to H2SO4.

Vedder, J. F.↗
NASA NTRS1983

Remote sensing of cloud radiation and microphysical parameters

Multispectral cloud radiometer (MCR) data, retrieved from a radiometer installed in a nadir viewing position on a high-altitude aircraft flying at 200 m/s and at an altitude of 60,000 ft above the mean sea level, are analyzed. The data discussed were obtained in the 0.754, 0.7609, 0.7634, 1.626, 2.125, and 11.38-micron channels, and are compared to lidar-derived profiles. Among the cloud parameters under consideration are the cloud scaled optical thickness, cloudtop altitude, scaled volume scattering coefficient, particle thermodynamic phase, mean particle size, and cloudtop temperature.

Wu, M.-L. C.↗
NASA NTRS1985

Quality of remote sensing measurements of cloud physical parameters in the cooperative convective precipitation experiment

In order to develop the remote sensing techniques to infer cloud physical parameters, a multispectral cloud radiometer (MCR) was mounted on a NASA high-altitude aircraft in conjunction with the Cooperative Convective Precipitation Experiment in 1981. The MCR has seven spectral channels, of which three are centered near windows associated with water vapor bands in the near infrared, two are centered near the oxygen A band at 0.76 microns, one is centered at the 1.14-micron water vapor band, and one is centered in the thermal infrared. The reflectance and temperature measured on May 31, 1981, are presented together with theoretical calculations. The results indicate that the MCR produces quality measurements. Therefore several cloud parameters can be derived with good accuracy. The parameters are the cloud-scaled optical thickness, cloud top pressure, volume scattering coefficient, particle thermodynamic phase, effective mean particle size, and cloud-top temperature.

Wu, M.-L.↗
NASA NTRS1985

Conference on Low Reynolds Number Airfoil Aerodynamics, Notre Dame, IN, June 16-18, 1985, Proceedings

Topics of interest in the design, flow modeling and visualization, and turbulence and flow separation effects for low Reynolds number (Re) airfoils are discussed. Design methods are presented for Re from 50,000-500,000, including a viscous-inviscid coupling method and by using a constrained pitching moment. The effects of pressure gradients, unsteady viscous aerodynamics and separation bubbles are investigated, with particular note made of factors which most influence the size and location of separation bubbles and control their effects. Attention is also given to experimentation with low Re airfoils and to numerical models of symmetry breaking and lift hysteresis from separation. Both steady and unsteady flow experiments are reviewed, with the trials having been held in wind tunnels and the free atmosphere. The topics discussed are of interest to designers of RPVs, high altitude aircraft, sailplanes, ultralights and wind turbines.

Mueller, T. J.↗
NASA NTRS1986

Satellite-derived leaf-area-index and vegetation maps as input to global carbon cycle models - A hierarchical approach

A hierarchical procedure for developing a leaf area index (LAI) map of deciduous boreal forests is studied. The collection of spectral reflectance data from the Boundary Waters Canoe area in Minnesota using helicopter-, high-altitude aircraft-, and Landsat-mounted spectral sensors is described. The relationship between LAI and biomass and the reflectance ratio is analyzed. The sensitivity of canopy reflectance in the visible and infrared to the LAI of the canopy for various boreal forest species is evaluated. The data reveal that Landsat data are useful for producing LAI maps of deciduous forest areas and the maps provide data which clarifies the function of vegetation in the global carbon cycle models.

Badhwar, G. D.↗
NASA NTRS1985

Land use mapping using edge density texture measures on Thematic Mapper simulator data

Texture analysis was performed as part of an investigation of the information content of Thematic Mapper (TM) imagery. High altitude aircraft scanner imagery from the Airborne Thematic Mapper (ATM) instrument was acquired over central California and used to simulate TM data. Edge density texture images were constructed by computation of proportions of edge pixels in a 31 x 31 moving window on a near infrared ATM band. A training technique was employed to select computational parameters to maximize the difference between edge density measurements in urban and in rural areas. The results of classification of the texture images showed that urban and rural areas could be distinguished with texture alone, indicating that inclusion of texture in automated classification procedures could significantly improve their accuracy.

Hlavka, C. A.↗