Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HOLE MOBILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Engineering donor–acceptor conjugated polymers for high-performance and fast-response organic electrochemical transistors

To date, high-performance organic electrochemical transistors (OECTs) have mostly been based on polythiophene systems. Donor–acceptor (D–A) conjugated polymers are expected to be promising materials for OECTs owing to their high mobility and comparatively low crystallinity (good for ion diffusion). However, the OECT performance of D–A polymers lags far behind that of the polythiophenes. Here we synergistically engineered the backbone and side chain of a series of diketopyrrolopyrrole (DPP)-based D–A polymers and found that redox potential, molecular weight, solution processability, and film microstructures all have a severe impact on their performance. After systematic engineering, P(bgDPP-MeOT2) exhibited the best figure-of-merit (μC*) of 225 F cm -1 V -1 s -1 , amongst the highest performance of the reported D–A polymers. Besides, the DPP polymers exhibited high hole mobility of over 1.6 cm 2 V -1 s -1 , leading to fast response OECTs with a record low turn-off response time of 30 μs. The polymer also exhibited good operation stability with a current retention of 98.8% over 700 electrochemical switching cycles. This work reveals the complexity and systematicness in the development of D–A polymer based high-performance OECTs.

36 MATERIALS SCIENCE↗

Solution-Synthesized High-Mobility Tellurium Nanoflakes for Short-Wave Infrared Photodetectors

Two-dimensional (2D) materials, particularly black phosphorus (bP), have demonstrated themselves to be excellent candidates for high-performance infrared photodetectors and transistors. However, high-quality bP can be obtained only via mechanical exfoliation from high-temperature- and high-pressure-grown bulk crystals and degrades rapidly when exposed to ambient conditions. In this paper, we report solution-synthesized and air-stable quasi-2D tellurium (Te) nanoflakes for short-wave infrared (SWIR) photodetectors. We perform comprehensive optical characterization via polarization-resolved transmission and reflection measurements and report the absorbance and complex refractive index of Te crystals. It is found that this material is an indirect semiconductor with a band gap of 0.31 eV. From temperature-dependent electrical measurements, we confirm this band-gap value and find that 12 nm thick Te nanoflakes show high hole mobilities of 450 and 1430 cm 2 V –1 s –1 at 300 and 77 K, respectively. Finally, we demonstrate that despite its indirect band gap, Te can be utilized for high-performance SWIR photodetectors by employing optical cavity substrates consisting of Au/Al 2 O 3 to dramatically increase the absorption in the semiconductor. By changing the thickness of the Al 2 O 3 cavity, the peak responsivity of Te photoconductors can be tuned from 1.4 μm (13 A/W) to 2.4 μm (8 A/W) with a cutoff wavelength of 3.4 μm, fully capturing the SWIR band. An optimized room-temperature specific detectivity (D*) of 2 × 10 9 cm Hz 1/2 W –1 is obtained at a wavelength of 1.7 μm.

2D materials↗

Monofluorination of Naphthyls Promotes the Cofacial π–π Stacking and Increases the Electron Mobility of Non-Planar Zinc(II) Complexes of Di(naphthylethynyl)azadipyrromethene

The homoleptic zinc(II) complex of [2,8-di(1-naphthylethynyl) 3,7-diphenyl 1,9-(4-hexylphenyl)azadipyrromethene (ZnL2) 2 ] is a promising non-planar non-fullerene acceptor for organic photovoltaic applications, but it has a relatively low electron mobility that may limit its performance. Here, we explored the fluorination of peripheral aryl groups to increase intermolecular cofacial π–π stacking interactions, which are desirable for electron transport. Here complexes with fluorine on the distal phenyls [Zn(1F-L2) 2 ], on the naphthyls [Zn(2F-L2) 2 ], and on both [Zn(3F-L2) 2 ] were synthesized and characterized. All three complexes had similar optical and electrochemical properties. The crystal packing structure of Zn(2F-L2) 2 and Zn(3F-L2) 2 revealed cofacial parallel-displaced π–π stacking between the fluorinated 1-naphthylethynyl groups. Such a cofacial orientation was not observed in Zn(L2) 2 crystals, suggesting that fluorination of the naphthyl groups promotes the cofacial π–π stacking orientation. The hole mobility increased from 1.0 × 10 –4 cm 2 V –1 s –1 for Zn(L2) 2 to 0.8–1.0 × 10 –3 cm 2 V –1 s –1 for the fluorinated complexes. Fluorination on the naphthyl groups increased the electron mobility from 4.2 × 10 –5 cm 2 V –1 s –1 for Zn(L2) 2 and Zn(1F-L2) 2 to 2.0 × 10 –4 cm 2 V –1 s –1 for Zn(2F-L2) 2 and Zn(3F-L2) 2 , consistent with cofacial π–π stacking being favorable for electron transport. The three complexes were tested in OPVs using regioregular poly(3-hexylthiophene) (P3HT) as the p-type material, and the best power conversion efficiencies were 5.2, 5.4, and 5.8% for Zn(2F-L2) 2 , Zn(1F-L2) 2 , and Zn(3F-L2) 2 , respectively, compared to 5.5% for Zn(L2) 2 . The fluorination combination found in Zn(3F-L2) 2 resulted in the best device performance. This study points to a viable strategy to increase the electron mobility and performance of non-planar zinc(II) complexes of azadipyrromethene.

36 MATERIALS SCIENCE↗

Growth of Low-Defect WSe 2 Film via High-Purity van der Waals Crystal Precursor

Two-dimensional (2D) semiconducting transition metal dichalcogenides (TMDs) exhibit exceptional electrical and optical properties, empowering their promising prospects for future nanoelectronics. Despite major advances in n-type 2D semiconductors, the field has yet to synthesize high-mobility p-type 2D TMDs, in particular WSe 2 , and systematically query the influence of defects. In this study, we unveil the pivotal role of substitutional impurity defects vis-à-vis the precursor used and growth method employed in defining the quality of 2D p-type WSe 2 . Density functional theory calculations suggest the adverse effect of Fe-, Co-, Ni- and Si-substituted W impurity defects on the mobility of WSe 2 , whereas defects such as O-, S-substituted Se and Mo-substituted W pose negligible impact. Guided by the theory, we pinpoint van der Waals (vdW) crystals, commonly used in mechanical exfoliation, as the optimal precursor, and develop a facile vdW crystal physical vapor deposition (PVD) method to grow high-purity monolayer 2D WSe 2 film (VPVD-WSe 2 ) that is continuous across a centimeter scale. A suite of spectroscopies confirms the markedly reduced defect density of the as-synthesized WSe 2 compared to those by typical chemical vapor deposition methods, and by PVD with commercial or hydrothermal precursors. Scanning tunneling microscopy further evidence the ultralow substitutional impurity defect density of VPVD-WSe 2 , greatly outperforming the control samples and approaching the mechanically exfoliated counterparts. The VPVD-WSe 2 based field-effect transistors exhibit notable electrical performance with record-high field-effect hole mobility up to 112 cm 2 V –1 s –1 at room temperature, exceeding the best-reported monolayer WSe 2 synthesized by chemical vapor deposition and rivaling the mechanically exfoliated 2D WSe 2 flakes.

WSe2↗

Two-dimensional polythiophene homopolymer as promising hole transport material for high-performance perovskite solar cells

A polythiophene homopolymer with conjugated side chains (2D-PT) was applied as a hole transport material (HTM) of perovskite solar cells (PSCs). The all-conjugated two-dimensional structure effectively increases the ionization potential, realizing a high open-circuit voltage near 1 V for the 2D-PT-based PSC. Very interestingly, the two-dimensional wide-angle X-ray scattering measurements show that the 2D-PT molecules are self-assembled into ordered structure with a face-on dominant orientation and exhibit a hole mobility, which is ~1.6 times faster than that of poly(3-hexylthiophene) (P3HT). Consequently, the power conversion efficiency of PSC is noticeably increased by ~30% as 2D-PT replaces P3HT as HTM. Moreover, the densely packed 2D-PT slows down the moisture induced degradation of perovskite crystals, leading to a better environmental stability. As a result, this work demonstrates that two-dimensional non-donor-acceptor structural conjugated polymers can be utilized as promising HTM of PSCs.

36 MATERIALS SCIENCE↗

Rapid and Facile Formation of P3HT Organogels via Spin Coating: Tuning Functional Properties of Organic Electronic Thin Films

Poly(3-hexyl thiophene) (P3HT) is widely regarded as the benchmark polymer when studying the physics of conjugated polymers used in organic electronic devices. P3HT can self-assemble via stacking of its backbone, leading to an assembly and growth of P3HT fi brils into 3D percolating organogels. These structures are capable of bridging the electrodes, providing multiple pathways for charge transport throughout the active layer. Here, a novel set of conditions is identified and discussed for P3HT organogel network formation via spin coating by monitoring the spin-coating process from various solvents. The development of organogel formation is detected by in situ static light scattering, which measures both the thinning rate by refl ectance and structural development in the fi lm via off-specular scattering during fi lm formation. Optical microscopy and thermal annealing experiments provide ex situ confi rmation of organogel fabrication. The role of solution characteristics, including solvent boiling point, P3HT solubility, and initial P3HT solution concentration on organogel formation, is examined to correlate these parameters to the rate of film formation, organogel-onset concentration, and overall network size. The correlation of film properties to the fabrication parameters is also analyzed within the context of the hole mobility and density-of-states measured by impedance spectroscopy.

36 MATERIALS SCIENCE↗

Printing 2D Conjugated Polymer Monolayers and Their Distinct Electronic Properties

Abstract Recently, 2D monolayer films of conjugated polymers have gained increasing attention owing to the preeminence of 2D inorganic films that exhibit unique optoelectronic and mechanical properties compared to their bulk analogs. Despite numerous efforts, crystallization of semiconducting polymers into highly ordered 2D monolayer films still remains challenging. Herein, a dynamic‐template‐assisted meniscus‐guided coating is utilized to fabricate continuous, highly ordered 2D monolayer films of conjugated polymers over a centimeter scale with enhanced backbone π–π stacking. In contrast, monolayer films printed on solid substrates confer upon the 1D fiber networks strong alkyl side‐chain stacking at the expense of backbone packing. From single‐layers to multilayers, the polymer π‐stacks change from edge‐on to bimodal orientation as the film thickness reaches ≈20 nm. Spectroscopic and cyclic voltammetry analysis reveals an abrupt increase in J‐aggregation and absorption coefficient and a decrease in bandgap and highest occupied molecular orbital level until critical thickness, possibly arising from the straightened polymer backbone. This is corroborated by an abrupt increase in hole mobility with film thickness, reaching a maximum of 0.7 cm 2 V −1 s −1 near the critical thickness. Finally, fabrication of chemical sensors incorporating polymer films of various thicknesses is demonstrated, and an ultrahigh sensitivity of the ≈7 nm thick ultrathin film (bilayers) to 1 ppb ammonia is shown.

Kafle, Prapti↗

A Semiconducting Two‐Dimensional Polymer as an Organic Electrochemical Transistor Active Layer

Abstract Organic electrochemical transistors (OECTs) are devices with broad potential in bioelectronic sensing, circuits, and neuromorphic hardware. Their unique properties arise from the use of organic mixed ionic/electronic conductors (OMIECs) as the active channel. Typical OMIECs are linear polymers, where defined and controlled microstructure/morphology, and reliable characterization of transport and charging can be elusive. Semiconducting two‐dimensional polymers (2DPs) present a new avenue in OMIEC materials development, enabling electronic transport along with precise control of well‐defined channels ideal for ion transport/intercalation. To this end, a recently reported 2DP, TIIP, is synthesized and patterned at 10 µm resolution as the channel of a transistor. The TIIP films demonstrate textured microstructure and show semiconducting properties with accessible oxidation states. Operating in an aqueous electrolyte, the 2DP‐OECT exhibits a device‐scale hole mobility of 0.05 cm 2 V –1 s –1 and a µ C * figure of merit of 1.75 F cm –1 V –1 s –1 . 2DP OMIECs thus offer new synthetic degrees of freedom to control OECT performance and may enable additional opportunities such as ion selectivity or improved stability through reduced morphological modulation during device operation.

2D-polymer↗

Extreme γ –Ray Radiation Tolerance of Spectrometer–Grade CsPbBr 3 Perovskite Detectors

The perovskite compound CsPbBr 3 has recently been discovered as a promising room-temperature semiconductor radiation detector, offering an inexpensive and easy-to-manufacture alternative to the current benchmark material Cd 1–x Zn x Te (CZT). The performance of CsPbBr 3 sensors is evaluated under harsh conditions, such as high radiation doses often found in industrial settings and extreme radiation in space. Results show minimal degradation in detector performance after exposure to 1 Mrad of Co-60 gamma radiation, with no significant change to energy resolution or hole mobility and lifetime. Additionally, many of the devices are still functional after being exposed to a 10 Mrad dose over 3 days, and those that do not survive can still be refabricated into working detectors. Notably, these results suggest that the failure mode in these devices is likely related to the interface between the electrode and material and their reaction, or the electrode itself and not the material itself. Overall, the study suggests that CsPbBr 3 has high potential as a reliable and efficient radiation detector in various applications, including those involving extreme fluxes and energies of gamma-ray radiation.

36 MATERIALS SCIENCE↗

Charge Carrier Induced Structural Ordering And Disordering in Organic Mixed Ionic Electronic Conductors

Operational stability underpins the successful application of organic mixed ionic-electronic conductors (OMIECs) in a wide range of fields, including biosensing, neuromorphic computing, and wearable electronics. Here in this work, both the operation and stability of a p-type OMIEC material of various molecular weights are investigated. Electrochemical transistor measurements reveal that device operation is very stable for at least 300 charging/discharging cycles independent of molecular weight, provided the charge density is kept below the threshold where strong charge–charge interactions become likely. When electrochemically charged to higher charge densities, an increase in device hysteresis and a decrease in conductivity due to a drop in the hole mobility arising from long-range microstructural disruptions are observed. By employing operando X-ray scattering techniques, two regimes of polaron-induced structural changes are found: 1) polaron-induced structural ordering at low carrier densities, and 2) irreversible structural disordering that disrupts charge transport at high carrier densities, where charge–charge interactions are significant. These operando measurements also reveal that the transfer curve hysteresis at high carrier densities is accompanied by an analogous structural hysteresis, providing a microstructural basis for such instabilities. This work provides a mechanistic understanding of the structural dynamics and material instabilities of OMIEC materials during device operation.

36 MATERIALS SCIENCE↗

Solution Monolayer Epitaxy for Tunable Atomically Sharp Oxide Interfaces

Abstract Interfaces play an important role in a variety of devices including transistors, solar cells, and memory components. Atomically sharp interfaces are essential to avoid charge traps that hamper efficient device operation. Sharp interfaces usually require thin‐film fabrication techniques involving ultrahigh vacuum and high substrate temperatures. A new self‐limiting wet chemical process for deposition of epitaxial layers from alkoxide precursors is presented. This method is fast, cheap, and yields perfect interfaces as validated by various analysis techniques. It allows the growth of heterostructures with half‐unit‐cell resolution. The method is demonstrated by designing a hole‐type oxide interface SrTiO 3 /BaO/LaAlO 3 . It is shown that transport through this interface exhibits properties of mixed electron–hole contributions with hole mobility exceeding that of electrons.

Ron, Alon↗

Boron Phosphide Films by Reactive Sputtering: Searching for a P‐Type Transparent Conductor

Abstract With an indirect band gap in the visible and a direct band gap at a much higher energy, boron phosphide (BP) holds promise as an unconventional p‐type transparent conductor. This work reports on reactive sputtering of amorphous BP films, their partial crystallization in a P‐containing annealing atmosphere, and extrinsic doping by C and Si. The highest hole concentration to date for p‐type BP (5 × 10 20 cm −3 ) is achieved using C doping under B‐rich conditions. Furthermore, bipolar doping is confirmed to be feasible in BP. An anneal temperature of at least 1000 °C is necessary for crystallization and dopant activation. Hole mobilities are low and indirect optical transitions are stronger than that predicted by theory. Low crystalline quality probably plays a role in both cases. High figures of merit for transparent conductors might be achievable in extrinsically doped BP films with improved crystalline quality.

36 MATERIALS SCIENCE↗

Understanding the Impact of Hierarchical Nanostructure in Ternary Organic Solar Cells

Ternary organic solar cells (OSCs), which blend two donors and fullerene derivatives with different absorption ranges, are a promising potential strategy for high-power conversion efficiencies (PCEs). In this study, inverted ternary OSCs are fabricated by blending a highly crystalline small molecule BDT-3T-CNCOO in a low band gap polymer PBDTTT-C-T:PC71BM. As the small molecule is introduced, the overall PCEs increase from 7.60% to 8.58%. The morphologies of ternary blends are studied by combining transmission electron microscopy and X-ray scattering techniques at different length scales. Hierarchical phase separation is revealed in the ternary blend, which is composed of domains with sizes of ≈88, ≈50, and ≈20 nm, respectively. The hierarchical phase separation balances the charge separation and transport in ternary OSCs. As a result, the fill factors of the devices significantly improve from 58.4% to 71.6%. Thus, ternary blends show higher hole mobility and higher fill factor than binary blends, which demonstrates a facile strategy to increase the performance of OSCs.

Chemistry↗

A Three-in-One Hybrid Strategy for High-Performance Semiconducting Polymers Processed from Anisole

The development of semiconducting polymers with good processability in green solvents and competitive electrical performance is essential for realizing sustainable large-scale manufacturing and commercialization of organic electronics. A major obstacle is the processability-performance dichotomy that is dictated by the lack of ideal building blocks with balanced polarity, solubility, electronic structures, and molecular conformation. Herein, through the integration of donor, quinoid and acceptor units, an unprecedented building block, namely TQBT, is introduced for constructing a serial of conjugated polymers. The TQBT, distinct in non-symmetric structure and high dipole moment, imparts enhanced solubility in anisole—a green solvent—to the polymer TQBT-T. Furthermore, PTQBT-T possess a highly rigid and planar backbone owing to the nearly coplanar geometry and quinoidal nature of TQBT, resulting in strong aggregation in solution and localized aggregates in film. Remarkably, PTQBT-T films spuncast from anisole exhibit a hole mobility of 2.30 cm 2 V -1 s -1 , which is record high for green solvent-processable semiconducting polymers via spin-coating, together with commendable operational and storage stability. The hybrid building block emerges as a pioneering electroactive unit, shedding light on future design strategies in high-performance semiconducting polymers compatible with green processing and marking a significant stride towards ecofriendly organic electronics.

36 MATERIALS SCIENCE↗

Non‐Conjugated Flexible Linkers in Semiconducting Polymers: A Pathway to Improved Processability without Compromising Device Performance

Semiconducting polymers, in contrast to inorganic silicon, are solution processable and can potentially be printed cost efficiently on flexible large‐area substrates. However to do so it is of paramount importance to formulate the polymeric semiconductors into inks with specific viscosities. Herein, the synthesis of a new highly soluble isoindigo monomer and its incorporation into low bandgap semiconducting polymers is presented. Non‐conjugated flexible linkers are introduced into the conjugated backbone in order to modulate the materials processability. The viscoelastic properties of the new polymers are studied in detail by means of rheometry and dynamical mechanical analysis. The solution viscosity is directly proportional to the content of non‐conjugated linkers in the polymer backbone. In organic field‐effect transistors maximum hole mobilities of 1.7 cm 2 V −1 s −1 are achieved with the new polymers. Due to the enhanced solubility all‐polymer solar cells are fabricated by solution shearing, reaching power conversion efficiency values of 3.7%.

Schroeder, Bob C.↗

Effects of Molecular Structure and Packing Order on the Stretchability of Semicrystalline Conjugated Poly(Tetrathienoacene-diketopyrrolopyrrole) Polymers

The design of polymer semiconductors possessing high charge transport performance, coupled with good ductility, remains a challenge. Understanding the distribution and behavior of both crystalline domains and amorphous regions in conjugated polymer films, upon an applied stress, shall provide general guiding principles to design stretchable organic semiconductors. Structure–property relationships (especially in both side chain and backbone engineering) are investigated for a series of poly(tetrathienoacene-diketopyrrolopyrrole) polymers. It is observed that the fused thiophene diketopyrrolopyrrole-based polymer, when incorporated with branched side chains and an additional thiophene spacer in the backbone, exhibits improved mechanical endurance and, in addition, does not show crack propagation until 40% strain. Furthermore, this polymer exhibits a hole mobility of 0.1 cm2 V -1 s -1 even at 100% strain or after recovered from strain, which reveals prominent continuity and viscoelasticity of the polymer thin film. In conclusion, it is also observed that the molecular packing orientations (either edge-on or face-on) significantly affect the mechanical compliance of the polymer films. The improved stretchability of the polymers is attributed to both the presence of soft amorphous regions and the intrinsic packing arrangement of its crystalline domains.

36 MATERIALS SCIENCE↗

Solvent-Free Coating of Organic Semiconductor Membranes with Centimetric Crystalline Domains

Organic semiconductors (OSCs) have shown great promise in a variety of applications. Although solution processing of OSCs has resulted in high-quality films, exquisite control of structural development to minimize defect formation during large-scale fabrication remains formidable. Compounding this challenge is the use of halogenated organic solvents, which poses significant health and environmental hazards. However, the solvent-free techniques introduced thus far impose additional limitations on solidification kinetics; the resulting OSC thin films are often more defective than those processed from solution. Here, a solvent-free technique is reported to prepare OSC membranes with centimetric crystalline domains. Leveraging the tendency for liquid crystalline materials to preferentially orient, OSCs are “prealigned” by depositing them from the melt over a metal frame to form a freely suspended membrane. Additionally, crystallization from this prealigned phase affords membranes with unprecedented structural order across macroscopic distances. Field-effect transistors comprising membranes of dioctyl[1]-benzothieno[3,2-b][1]benzothiophene (C8BTBT) and didodecyl[1]-benzothieno[3,2-b][1]benzothiophene (C12BTBT) having centimeter-sized domains as active layers exhibit a hole mobility of ≈8.6 cm2 V -1 s -1 , superseding the mobility of any transistors whose active layers are deposited from melt. This technique is scalable to yield membranes with large crystalline domains over wafer dimensions, making it amenable for broad applications in large-area organic electronics.

36 MATERIALS SCIENCE↗