Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Exponential distribution”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Semi-empirical calculation of depletion region width in n+-p silicon solar cells

An extension of the width calculation for impurity distributions of complementary error function and the Gaussian function, in addition to the exponential function is used in combination with experimental width values deduced from capacitance measurements at zero bias to numerically determine the width occurring in both the n+ and p junctions. The total possible error o the semi-empirical calculation is less than plus or minus 3%. Results show considerable variation in the depletion widths occurring in the n+ and p regions for different impurity profiles.

Wang, E. Y.↗
NASA NTRS1981

Observations of the ionization states of energetic particles accelerated in solar flares

Results of a survey of ten solar flare particle events, in which the ionization states and spectra of 0.3 to 2.4 MeV/nuc He, C, O and Fe were measured, are reported. He+ was present in all events (He+/He++ approximately 0.1 to 0.25), and the mean ionization states of C, O and Fe are high. The distribution functions of He+, He++ and heavier elements are well represented by simple exponentials of the particle speed times its rigidity to a power n, where n is between O and 1, and equal e-folding values. Results are consistent with a model whereby ions are accelerated in the corona by multi-dimensional shocks out of a population taken from both hot and cold coronal regions.

Gloeckler, G.↗
NASA NTRS1980

Distribution function representation of energy spectra of H, He, C, O and Fe in corotating particle streams

From an analysis of nine corotating events observed near 1 AU during the 1974-1976 solar minimum, the spectral parameters for H, He, C, O and Fe and relative abundances of these elements and of Ne, Mg, Si, and S-Ca were determined. The distribution functions of H, He, O and Fe are well represented by an exponential in particle speed over the energy range of the measurements from 0.3 to 5 MeV/nucleon. The composition resembles that of the solar corona, particularly in the O/C ratio which is 0.95 + or - 0.19, and the He/H and He/Ne ratios are similar to the respective ratios in the solar wind. The results are consistent with interplanetary statistical acceleration of these particles out of the high-energy tail of the high-speed solar wind.

Gloeckler, G.↗
NASA NTRS1986

The hydrogen coma of Comet Halley before perihelion: Preliminary observations with dynamics Explorer 1

The hydrogen coma of Comet Halley has been observed in resonantly scattered solar Lyman-alpha radiation during the period 1-29 January 1986 as the comet approached perihelion. These observations were obtained with the imaging photometer for vacuum-ultraviolet wavelengths on the spacecraft Dynamics Explorer 1. For the initial analysis of observations available in 17 orbits distributed throughout the period, least-squares fits are computed for the observed exponential decrease in brightness with radial distance from the nucleus. Brightness at the nucleus increased from approx. 3 to 17 kR during the observing period. Preliminary analysis yields water production rates of approx. 3.6 x 10 to the 29th power and 1.9 x 10 to the 30th power molecules/sec on 1 and 29 January, respectively.

Craven, J. D.↗
NASA NTRS1986

The hydrogen coma of Comet Halley before perihelion Preliminary observations with Dynamics Explorer 1

The hydrogen coma of Comet Halley has been observed in resonantly scattered solar Lyman-alpha radiation during the period 4-29 January 1986 as the comet approached perihelion. These observations were obtained with the imaging photometer for vacuum-ultraviolet wavelengths on the spacecraft Dynamics Explorer 4. For the initial analysis of observations available in 17 orbits distributed throughout the period, least-squares fits are computed for the observed exponential decrease in brightness with radial distance from the nucleus. Brightness at the nucleus increased from approx. 3 to 17 kR during the observing period. Preliminary analysis yields water production rates of approx. 3.6 x 10 to the 29th power and 1.9 x 10 to the 30th power molecules/sec on 1 and 29 January, respectively.

Craven, J. D.↗
NASA NTRS1988

Period doubling in the outer heliosphere

From approximately July 28 to November 26, 1984, IMP 8 at 1 AU observed quasi-periodic interaction regions in the solar wind characterized by a peak every 13.4 days in the magnetic field strength, plasma density, and temperature, corresponding to an inertial period of 12.5 days. When the same solar wind reached Voyager 2 (which moved from 15.2 to 16.1 AU during the corresponding time interval, September 27, 1984, to January 27, 1985), the enhancements in the magnetic field strength and the plasma density and temperature recurred with a period of approximately 25 days. Thus the period of the large-scale fluctuations in B, N, and T doubled between 1 AU and 15.2 AU. The magnetic field strength increased linearly with the density and the temperature in the Voyager 2 data. The tails of the distributions of B, N, and T in the Voyager 2 data were approximately exponential.

Burlaga, L. F.↗
NASA NTRS2011

Reconciling Satellite-Derived Atmospheric Properties with Fine-Resolution Land Imagery: Insights for Atmospheric Correction

This paper investigates to what extent satellite measurements of atmospheric properties can be reconciled with fine-resolution land imagery, in order to improve the estimates of surface reflectance through physically based atmospheric correction. The analysis deals with mountainous area (Landsat scene of Peruvian Amazon/Andes, 72 E and 13 S), where the atmosphere is highly variable. Data from satellite sensors were used for characterization of the key atmospheric constituents: total water vapor (TWV), aerosol optical depth (AOD), and total ozone. Constituent time series revealed the season-dependent mean state of the atmosphere and its variability. Discrepancies between AOD from the Advanced Along-Track Scanning Radiometer (AATSR) and Moderate Resolution Imaging Spectroradiometer (MODIS) highlighted substantial uncertainty of atmospheric aerosol properties. The distribution of TWV and AOD over a Landsat scene was found to be exponentially related to ground elevation (mean R(sup 2) of 0.82 and 0.29, respectively). In consequence, the atmosphere-induced and seasonally varying bias of the top-of-atmosphere signal was also elevation dependent (e.g., mean Normalized Difference Vegetation Index bias at 500 m was 0.06 and at 4000 m was 0.01). We demonstrate that satellite measurements of key atmospheric constituents can be downscaled and gap filled with the proposed "background + anomalies" approach, to allow for a better compatibility with fine-resolution land surface imagery. Older images (i.e., predating the MODIS/ATSR era), without coincident atmospheric data, can be corrected using climatologies derived from time series of satellite retrievals. Averaging such climatologies over space compromises the quality of correction result to a much greater degree than averaging them over time. We conclude that the quality of both recent and older fine-resolution land surface imagery can be improved with satellite-based atmospheric data acquired to date.

Zelazowski, Przemyslaw↗
NASA NTRS1979

Asteroid taxonomy and the distribution of the compositional types

Physical observations of minor planets documented in the TRIAD computer file are used to classify 752 objects into the broad compositional types C, S, M, E, R, and U (unclassifiable) according to the prescriptions adopted by Bowell et al. (1978). Diameters are computed from the photometric magnitude using radiometric and/or polarimetric data where available, or else from albedos characteristic of the indicated type. An analysis of the observational selection effects leads to tabulation of the actual number of asteroids, as a function of type and diameter, in each of 15 orbital element zones. For the whole main belt the population is 75% of type C, 15% of type S, and 10% of other types, with no belt-wide dependence of the mixing ratios on diameter. In some zones the logarithmic diameter-frequency relations are decidedly nonlinear. The relative frequency of S-type objects decreases smoothly outward through the main belt, with exponential scale length 0.5 AU. The rarer types show a more chaotic, but generally flatter, distribution over distance. Characteristic type distributions, contrasting with the background population, are found for the Eos, Koronis, Nysa and Themis families.

Zellner, B.↗
NASA NTRS1987

A study of a flux-limited sample of IRAS galaxies

Redshift data and accurate four-color infrared photometry are presented for a complete IRAS sample of galaxies brighter than 2 Jy at 60 microns. A simple power law provides a good fit to the distribution for luminosities from 10 to the 10th to 10 to the 12th solar. There is no indication of an exponential dropoff in the luminosity function at high energies. A flattening of the luminosity function occurs at L less than 10 to the 20th solar. The highest luminosity galaxies typically are found in multiple, possibly interacting, systems and exhibit marginally narrower infrared spectral energy distributions than the isolated spirals which predominate at low luminosities. Infrared-bright galaxies come from a different population than the majority of optically bright galaxies. In particular, galaxies of low blue luminosity are not strong infrared emitters.

Smith, Beverly J.↗
NASA NTRS1979

Observed distribution functions of H, He, C, O, and Fe in corotating energetic particle streams - Implications for interplanetary acceleration and propagation

Distribution functions for H, He, C, O, and Fe derived from our IMP 8 measurements of about 0.15 to 8 MeV per nucleon particles in three corotating streams observed near Earth are shown to have a simple exponential dependence on the particle speed. The e-folding speed, typically 0.01c, is found to be the same for the distribution functions of all elements examined, and varies little from one corotating event to the next. The relative abundances of energetic particles in these events resemble most closely the solar coronal composition and thus, presumably, that of the solar wind. These results may imply that acceleration of these particles, which occurs in corotating interaction regions at several AU from the sun, is by a statistical process.

Gloeckler, G.↗
NASA NTRS1985

The extent of the local hi halo

Forty-five high-latitude, OB stars have been observed in the Ly alpha and 21 cm lines of HI in an effort to map out the vertical distribution and extent of the local HI halo. The 25 stars for which a reliable HI colum density can be obtained from Ly alpha lie between 60 and 3100 pc from the plane. The principal result is that the total column density of HI at z 1 kpc is, on the average, 5 + or - 3 x 10 the 19th power/sq cm, or 15% of the total sub HI. At relatively low z the data toward some stars suggest a low effective scale height and fairly high average foreground density, while toward others the effective scale height is large and the average density is low. This can be understood as the result of irregularities in the interstellar medium. A model with half of the HI mass in clouds having radii of a few pc and a Gaussian vertical distribution with sigma sub 2 = 135 pc, and half of the mass in an exponential component with a scale height of 500 pc, gives a satisfactory fit to the data. The technique of comparing Ly alpha and 21 cm column densities is also used to discuss the problem of estimating the distance to several possibly subluminous stars.

Lockman, F. J.↗
NASA NTRS1986

The extent of the local H I halo

Forty-five high-latitude, OB stars have been observed in the Ly alpha and 21 cm lines of HI in an effort to map out the vertical distribution and extent of the local HI halo. The 25 stars for which a reliable HI column density can be obtained from Ly alpha lie between 60 and 3100 pc from the plane. The principal result is that the total column density of HI at an absolute value of z greater than 1 kpc is, on the average, 5 + or - 3 x 10 to the 19th power/sq cm, or 15 percent of the total sub HI. At relatively low z the data toward some stars suggest a low effective scale height and fairly high average foreground density, while toward others the effective scale height is large and the average density is low. This can be understood as the result of irregularities in the interstellar medium. A model with half of the HI mass in clouds having radii of a few pc and a Gaussian vertical distribution with sigma sub 2 = 135 pc, and half of the mass in an exponential component with a scale height of 500 pc, gives a satisfactory fit to the data. The technique of comparing Ly alpha and 21 cm column densities is also used to discuss the problem of estimating the distance to several possibly subluminous stars.

Lockman, F. J.↗
NASA NTRS1993

Kinetic relaxation of a non-Maxwellian monatomic gas in a state of gross rest

The kinetic relaxation of a monatomic gas in a state of gross rest is studied by use of Maxwell's second-order moment equation. The molecular models considered range from the hard sphere to the Maxwell molecule. The development is exact for an ellipsoidal distribution and becomes a good approximation for more general distributions. The results show that the relaxation of second-order moments is nearly exponential for power-law molecules and that the characteristic time mu/p appears as the principal controlling parameter while the power-law constant plays a secondary role. Comparisons between results of numerical simulations using Bird's direct simulation Monte Carlo method and theory show excellent agreement for both hard-sphere and Maxwell molecules.

Baganoff, D.↗
NASA NTRS1996

GENIE(++): A Multi-Block Structured Grid System

The computer code GENIE++ is a continuously evolving grid system containing a multitude of proven geometry/grid techniques. The generation process in GENIE++ is based on an earlier version. The process uses several techniques either separately or in combination to quickly and economically generate sculptured geometry descriptions and grids for arbitrary geometries. The computational mesh is formed by using an appropriate algebraic method. Grid clustering is accomplished with either exponential or hyperbolic tangent routines which allow the user to specify a desired point distribution. Grid smoothing can be accomplished by using an elliptic solver with proper forcing functions. B-spline and Non-Uniform Rational B-splines (NURBS) algorithms are used for surface definition and redistribution. The built in sculptured geometry definition with desired distribution of points, automatic Bezier curve/surface generation for interior boundaries/surfaces, and surface redistribution is based on NURBS. Weighted Lagrance/Hermite transfinite interpolation methods, interactive geometry/grid manipulation modules, and on-line graphical visualization of the generation process are salient features of this system which result in a significant time savings for a given geometry/grid application.

Williams, Tonya↗
NASA NTRS1992

Oxygen-rich semiregular and irregular variables

All the known oxygen-rich semiregulars and irregulars of spectral classes K and M with the absolute value of B not greater than 30 deg, Delta(m) not less than 0.5 mag, and, for the semiregulars, periods in the range of 50 to 400 d are compiled. On the basis of their distributions on the sky and their brightnesses in the K band at 2.2 microns, it is argued that the semiregulars with a period of 300-400 d appear to belong to the same population as the 'thin disk' Miras in the same period range and have an exponential scale height from the Galactic plane of about 250 pc. The semiregulars with a period range of 200 to 300 d belong to the population of the 'thick disk' Miras with an exponential scale height from the Galactic plane of about 500 pc. On the basis of the similarities of their space distributions and the presence of Tc in their atmospheres, and using the pulsational mode calculations by Ostlie and Cox (1986), it is suggested that the semiregulars with a period range of 100-150 d are first and second overtone pulsations of the same population of AGB stars as the Miras in their fundamental pulsational mode with periods longer than 300 d.

Jura, M.↗
NASA NTRSDate not supplied

The Impact of Pixel Size on the Characterization of Deep Convective Clouds for Calibration

The NASA CERES project provides the scientific community the observed TOA SW and LW fluxes for climate monitoring and climate model validation. CERES utilizes hourly geostationary imager derived broadband fluxes, which rely on the channel radiances and associated cloud retrievals, are used to estimate the broadband fluxes between CERES observations. This requires stable and consistent cross-platform imager visible channel calibration. The CERES project utilizes deep convective clouds (DCC) as an invariant Earth target to both monitor the stability of sensors and for radiometric scaling. GSICS, an international collaboration, is also evaluating and implementing the DCC invariant target calibration methodology to provide consistent calibration coefficients across geostationary imagers anchored to the AquaMODIS or the NOAA-20 VIIRS calibration reference. Tropical DCC are the brightest, coldest, most Lambertian, top of the atmosphere Earth targets. The DCC invariant target calibration methodology relies on a large ensemble of tropical D CC-identified pixel-level reflectances, which are aggregated as probability density functions (PDF). By assuming the monthly PDF shape is otherwise consistent in time excepting shifts in reflectance caused by changes in the sensor calibration, the imager stability is monitored. Radiometric scaling is accomplished by ratioing the sensor pair DCC PDF reflectance values. The success of the DCC methodology relies on consistent PDF distributions. The goal of this study is to determine the impact of pixel resolution on the DCC reflectance distribution. Single SNPP-VIIRS 750-m and Landsat 8 OLI 30-m granules are aggregated to degrade the pixel resolution from the native level. The DCC pixels are identified using a BT threshold. Most of the brightest DCC pixels are also the coldest, although there are exceptions. It was found that increasing the BT threshold exponentially increased the number of darker pixels. The pixel resolution did not seem to impact the DCC reflectance PDF distribution for pixel resolutions less than 3 km, which suggests that imagers of varying pixel resolutions may be radiometrically scaled to each other using DCC targets.

DCC↗
NASA NTRS1999

Cloud Thickness from Diffusion of Lidar Pulses in Clouds

Measurements of the distribution of reflected light from a laser beam incident on an aqueous suspension of particles or "cloud" with known thickness and particle size distribution are reported. The distribution is referred to as the "cloud radiative Green's function", G. In the diffusion domain, G is sensitive to cloud thickness, allowing that important quantity to be retrieved. The goal of the laboratory simulation is to provide preliminary estimates of sensitivity of G to cloud thickness,for use in the optimal design of an offbeam Lidar instrument for remote sensing of cloud thickness (THOR, Thickness from Offbeam Returns). These clouds of polystyrene microspheres suspended in water are analogous to real clouds of water droplets suspended in air. The microsphere size distribution is roughly lognormal, from 0.5 microns to 25 microns, similar to real clouds. Density of suspended spheres is adjusted so mean-free-path of visible photons is about 10 cm, approximately 1000 times smaller than in real clouds. The light source is a ND:YAG laser at 530 nm. Detectors are flux and photon-counting Photomultiplier Tube (PMTS), with a glass probe for precise positioning. A Labview 5 VI controls positioning, and data acquisition, via an NI Motion Control board connected to a stepper motor driving an Edmund linear slider, and a 16-channel 16-bit NI-DAQ board. The stepper motor is accurate to 10 microns, and step size is selectable from the VI software. Far from the incident beam, the rate of exponential increase as the direction of the incident beam is approached scales as expected from diffusion theory, linearly with the cloud thickness, and inversely as the square root of the reduced optical thickness, and is independent of particle size. Near the beam the signal begins to increase faster than exponential, due to single and low-order scattering near the backward direction, and here the distribution depends on particle size. Results are being used to verify 3D Monte Carlo radiative transfer simulations, used to estimate signal-to-noise ratios for remotely sensed off beam returns, for both homogeneous and inhomogeneous clouds. Signal-to-noise estimates show that unfiltered observations are straight forward at night, while narrow band pass filters are being studied for day.

Cahalan, Robert F.↗
NASA NTRS1989

Plume characteristics of MPD thrusters - A preliminary examination

A diagnostics facility for MPD thruster plume measurements has been built and is currently undergoing testing. The facility includes electrostatic probes for electron temperature and density measurements, Hall probes for magnetic field and current distribution mapping, and an imaging system to establish the global distribution of plasma species. Preliminary results for MPD thrusters operated at power levels between 30 and 60 kW with solenoidal applied magnetic fields show that the electron density decreases exponentially from 1 x 10 to the 20th/cu m to 2 x 10 to the 18th/cu m over the first 30 cm of the expansion, while the electron temperature distribution is relatively uniform, decreasing from approximately 2.5 eV to 1.5 eV over the same distance. The radiant intensity of the ArII 4879 A line emission follows similar patterns. Current distribution measurements indicate that significant fraction of the discharge current is blown into the plume region, and that its distribution depends on the magnitudes of both the discharge current and the applied magnetic field.

Myers, R. M.↗