Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electrocatalyst”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗
DOE OSTI2020

Rational Design of a Ni 3 N 0.85 Electrocatalyst to Accelerate Polysulfide Conversion in Lithium–Sulfur Batteries

Slow kinetics of polysulfide conversion reactions lead to severe issues for lithium–sulfur (Li–S) batteries, for example, low rate capability, polysulfide migration, and low Coulombic efficiencies. These challenges hinder the practical applications of Li–S batteries. Here, we proposed a rational strategy of tuning the d-band of catalysts to accelerate the conversion of polysulfides. Nitrogen vacancies were engineered in hexagonal Ni 3 N (space group P 6 3 22) to tune its d-band center, leading to the strong interaction between polysulfides and Ni 3 N. Because of the greater electron population in the lowest occupied molecular orbital of Li 2 S 4 , the terminal S–S bonds were weakened for breaking. Temperature-dependent experiments confirm that Ni 3 N 0.85 demonstrates a much low activation energy, thereby accelerating the conversion of polysulfides. A Li–S cell using Ni 3 N 0.85 can deliver a high initial discharge capacity of 1445.9 mAh g –1 (at 0.02 C) and low decay per cycle (0.039%). The Ni 3 N 0.85 cell can also demonstrate an initial capacity of 1200.4 mAh g –1 for up to 100 cycles at a high loading of 5.2 mg cm –2 . The high efficiency of rationally designed Ni 3 N 0.85 demonstrates the effectiveness of the d-band tuning strategy to develop low-activation-energy catalysts and to promote the atomic understanding of polysulfide conversion in Li–S batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

Structural Anisotropy Determining the Oxygen Evolution Mechanism of Strongly Correlated Perovskite Nickelate Electrocatalyst

The regulation of reactive centers by involving the participation of lattice oxygen has been reported as an effective strategy for lowering the reaction barrier for the oxygen evolution reaction (OER). However, the control of the OER pathway by taking advantage of the intrinsic properties of catalysts remains a challenging task. Herein, we adopt perovskite nickelate (i.e., NdNiO3 (NNO)) and establish the link between structural anisotropy and the OER catalytic mechanism. The results elucidate that NNO with (100), (110), and (111) orientations display similar oxidative states and metal–oxygen covalency characteristics but distinct OER activities following the order of (100) > (110) > (111). Density function theory (DFT) results confirm that film orientation is a critical determinant of the reaction mechanism. The OER on (100)-NNO favors proceeding via a lattice-oxygen-mediated mechanism (LOM). In contrast, the reaction on (110)-NNO and (111)-NNO follows the adsorbate evolution mechanism (AEM). The anisotropic oxygen vacancy formation energy and stability are strongly correlated to the reaction mechanism and performance, which can be described in brief by the metal–oxygen bond valence. Furthermore, our results are a step toward achieving the long-sought convenient approach to tune the OER mechanism, which is applicable for a wide range of sustainable energy-related devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Co-sputtered CuNi heteroatomic electrocatalyst for enhanced 5-hydroxymethylfurfural selective electrochemical conversion

The electrochemical conversion of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising, economically viable, and environmentally sustainable approach for producing value-added chemicals using renewable energy and in situ hydrogen generated through water electrolysis. However, the electrochemical hydrogenation (ECH) of HMF remains challenging due to the inherently low catalytic activity and selectivity of the electrodes, compounded by competition with the kinetically favored hydrogen evolution reaction (HER) in aqueous electrolytes. In this work, we demonstrate that Cu x Ni 100−x heteroatomic thin films, fabricated via direct current (DC) magnetron co-sputtering, achieve a more than one order of magnitude increase in the HMF to 2,5-Bis-hydroxymethylfuran (BHMF) conversion rate, with nearly 50% faradic efficiency (FE) for BHMF, when compared to pure Cu and Ni electrodes (~ 10% BHMF FE). Our results suggest that the synergistic interaction between Cu and Ni creates an optimal catalytic environment for both HMF and adsorbed hydrogen (H ads ) species, thereby enhancing BHMF formation through the ECH pathway.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Two-dimensional ruthenium boride: a Dirac nodal loop quantum electrocatalyst for efficient hydrogen evolution reaction

Catalysts with high carrier mobility, high activity, and an active basal plane have been highly sought for the hydrogen evolution reaction (HER). However, combining these advantages into one single material is a grand challenge. Herein, using first principles computations, we predicted that a two-dimensional (2D) Dirac nodal loop semimetal, namely the RuB 4 monolayer, is promising as a superior catalyst for the HER. Our systematic computations showed that the single layer RuB 4 is thermodynamically, dynamically, mechanically, and thermally stable and presents multiple Ru and B sites for the HER on the basal plane. The estimated Gibbs free energy for hydrogen adsorption at a Ru site is approaching zero (–8.8 meV), suggesting its excellent HER performance. The RuB 4 monolayer is a Dirac nodal loop semimetal with high Fermi velocities, which can accelerate charge transfer between catalysts and reaction intermediates. The RuB 4 monolayer is an auxetic material with an out-of-plane negative Poisson's ratio, implying its novel mechanical properties. Finally, this work provides an example of using a Dirac nodal loop semimetal for high-performance HER catalysts, which is a promising alternative to the known catalysts with trivial metallic properties.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Supramolecular Metal‐Organic Framework Electrocatalysts With Hydration‐Adaptive Gallery Expansion and Linker‐Mediated Distal Ni‐Co Cooperation Enable Framework‐Retentive Oxygen Evolution

Atomic‑level tailoring of electronic communication between spatially separated metal sites offers a route to accelerate multielectron electrocatalysis. We report Ni-TPTC, Co-TPTC, and heterobimetallic Ni-Co-TPTC supramolecular metal-organic frameworks (SMOFs) for the oxygen evolution reaction (OER) built from a terphenyl‑tetracarboxylate (TPTC) linker. Single-crystal X-ray diffraction of heterobimetallic Ni–Co–TPTC reveals trans-bis-aqua octahedral chains assembled into a π-stacked, hydrogen-bonded lattice and confirms retention of the parent architecture, while powder X-ray diffraction supports an isostructural Co analog. In 1.0 M KOH, Ni-Co-TPTC reaches 20 mA cm −2 at 350 mV and maintains operation at ∼60 mA cm −2 for 45 h with modest decay of the initial current. Time‑dependent ex situ diffraction shows dominant framework reflections with low‑angle shifts consistent with gallery dilation (d‑spacing ∼7.7 → ∼9.2 Å) during early operation, while Co K‑edge X‑ray absorption and microscopy reveal Co‑rich oxide/oxyhydroxide‑like domains at longer times that correlate with decay. X‑ray photoelectron spectroscopy, quantified by the Remote Binding‑Energy Differential, tracks composition‑dependent Ni-Co polarization, and DFT free‑energy analysis suggests that a model Ni-Co environment lowers the Co‑centered potential‑limiting step by ∼0.24 eV relative to the Co‑only framework. Furthermore, these results suggest that framework‑retentive expansion and distal Ni-Co coupling can drive OER activity before gradual deligation and oxide formation mark longer‑time degradation.

Supramolecular metal-organic frameworks (SMOFs)↗
DOE OSTI2023

Coordination Polymer Electrocatalysts Enable Efficient CO‐to‐Acetate Conversion

Abstract Upgrading carbon dioxide/monoxide to multi‐carbon C 2+ products using renewable electricity offers one route to more sustainable fuel and chemical production. One of the most appealing products is acetate, the profitable electrosynthesis of which demands a catalyst with higher efficiency. Here, a coordination polymer (CP) catalyst is reported that consists of Cu(I) and benzimidazole units linked via Cu(I)‐imidazole coordination bonds, which enables selective reduction of CO to acetate with a 61% Faradaic efficiency at −0.59 volts versus the reversible hydrogen electrode at a current density of 400 mA cm −2 in flow cells. The catalyst is integrated in a cation exchange membrane‐based membrane electrode assembly that enables stable acetate electrosynthesis for 190 h, while achieving direct collection of concentrated acetate (3.3 molar) from the cathodic liquid stream, an average single‐pass utilization of 50% toward CO‐to‐acetate conversion, and an average acetate full‐cell energy efficiency of 15% at a current density of 250 mA cm −2 .

Luo, Mingchuan↗
DOE OSTI2023

Review of Carbon Support Coordination Environments for Single Metal Atom Electrocatalysts (SACS)

This topical review focuses on the distinct role of carbon support coordination environment of single-atom catalysts (SACs) for electrocatalysis. The article begins with an overview of atomic coordination configurations in SACs, including a discussion of the advanced characterization techniques and simulation used for understanding the active sites. A summary of key electrocatalysis applications is then provided. These processes are oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER), nitrogen reduction reaction (NRR), and carbon dioxide reduction reaction (CO 2 RR). The review then shifts to modulation of the metal atom-carbon coordination environments, focusing on nitrogen and other non-metal coordination through modulation at the first coordination shell and modulation in the second and higher coordination shells. Representative case studies are provided, starting with the classic four-nitrogen-coordinated single metal atom (M$-$N 4 ) based SACs. Bimetallic coordination models including homo-paired and hetero-paired active sites are also discussed, being categorized as emerging approaches. The theme of the discussions is the correlation between synthesis methods for selective doping, the carbon structure–electron configuration changes associated with the doping, the analytical techniques used to ascertain these changes, and the resultant electrocatalysis performance. In conclusion, critical unanswered questions as well as promising underexplored research directions are identified.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synergistic Co-Ir/Ru Composite Electrocatalysts Impart Efficient and Durable Oxygen Evolution Catalysis in Acid

Exploring highly active and robust catalysts, which have low precious metal content, to boost the kinetically sluggish oxygen evolution reaction (OER) is a key concern for hydrogen production via proton exchange membrane water electrolysis (PEMWE). Here, in this work, rational engineering of the morphology and the local geometric ligand environment of Ir and Ru catalysts are presented by using defect-rich, lanthanum- and lithium-doped Co 3 O 4 nanofiber (LLCF) as substrate that promotes the electrocatalytic OER. Two catalysts, IrCoOx@LLCF and RuCoOx@LLCF, achieve mass activities of 1013.5 A g Ir –1 and 1911.4 A g Ru –1 in 0.1 M HClO 4 at 300 mV overpotential, respectively, which are 26 and 50 times higher than that of commercial IrO 2 and RuO 2 . Operando X-ray absorption spectroscopy unveils the reversible structure of IrCoOx during the OER and the suppression of over-oxidation of Co and Ir, giving rise to high stability. Density functional theory calculations reveal that the local geometric ligand engineering optimizes the binding of oxygenated species to the active sites, resulting in strongly enhanced catalytic activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Advancing Insights into Electrochemical Pre‐Treatments of Supported Nanoparticle Electrocatalysts by Combining a Design of Experiments Strategy with In Situ Characterization

Activation, break-in, and/or pre-treatment protocols are generally applied to energy conversion devices before regular operation to reach stable performance. There remains much to understand about the relationships among physical properties, performance, and electrochemical pre-treatments. Here, a design-of-experiments (DoE) strategy is employed to address this gap by demonstrating the influence of five pre-treatment parameters for carbon-supported Pt-nanoparticle catalysts on the electrocatalytic oxygen reduction reaction (ORR). A subset of pre-treatments, developed using a central composite design, are tested in a flow cell combined with an inductively-coupled plasma mass spectrometer (on-line ICP-MS). The DoE-based approach facilitates comprehensive insights from two orders of magnitude fewer experiments than a conventional grid search. The coupled on-line ICP-MS setup enables effective catalysis and real-time catalyst dissolution data. Leveraging insights from DoE for on-line ICP-MS and additional characterization, a model is built between the degradation of a multi-dimensional supported Pt surface, its performance, and applied electrochemical parameters. These investigations identify surface modifications, such as oxidation, and subsequent restructuring of Pt during pre-treatment as a primary cause of performance deterioration during ORR. By combining DoE with advanced characterization techniques, a powerful approach is demonstrated to gain a mechanistic understanding of pre-treatment protocols that can be broadly adapted to various reaction chemistries.

Platinum↗
DOE OSTI2020

Single‐Atom Electrocatalysts from Multivariate Metal–Organic Frameworks for Highly Selective Reduction of CO 2 at Low Pressures

Abstract Single‐atom catalysts (SACs) are of great interest because of their ultrahigh activity and selectivity. However, it is difficult to construct model SACs according to a general synthetic method, and therefore, discerning differences in activity of diverse single‐atom catalysts is not straightforward. Herein, a general strategy for synthesis of single‐atom metals implanted in N‐doped carbon (M 1 ‐N‐C; M=Fe, Co, Ni and Cu) has been developed starting from multivariate metal–organic frameworks (MOFs). The M 1 ‐N‐C catalysts, featuring identical chemical environments and supports, provided an ideal platform for differentiating the activity of single‐atom metal species. When employed in electrocatalytic CO 2 reduction, Ni 1 ‐N‐C exhibited a very high CO Faradaic efficiency (FE) up to 96.8 % that far surpassed Fe 1 ‐, Co 1 ‐ and Cu 1 ‐N‐C. Remarkably, the best‐performer, Ni 1 ‐N‐C, even demonstrated excellent CO FE at low CO 2 pressures, thereby representing a promising opportunity for the direct use of dilute CO 2 feedstock.

Jiao, Long↗
DOE OSTI2020

An Active‐Site Sulfonate Group Creates a Fast Water Oxidation Electrocatalyst That Exhibits High Activity in Acid

Abstract The storage of solar energy in chemical bonds will depend on pH‐universal catalysts that are not only impervious to acid, but actually thrive in it. Whereas other homogeneous water oxidation catalysts are less active in acid, we report a catalyst that maintained high electrocatalytic turnover frequency at pH values as low as 1.1 and 0.43 ( k cat =1501±608 s −1 and 831±254 s −1 , respectively). Moreover, current densities, related to catalytic reaction rates, ranged from 15 to 50 mA cm −2 mM −1 comparable to those reported for state‐of‐the‐art heterogeneous catalysts and 30 to 100 times greater than those measured for two prominent literature homogeneous catalysts at pH 1.1 and 0.43. The catalyst also exhibited excellent durability when a chemical oxidant was used (Ce IV , 7400 turnovers, TOF 0.88 s −1 ). Preliminary computational studies suggest that the unusual active‐site sulfonate group acts a proton relay even in strong acid, as intended.

Nash, Aaron G.↗