SEARCH · Engineering Papers
Results for “Effective properties”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electric field hysteresis effects in the transmission properties of liquid crystals
Electric field hysteresis effects in transmission properties of liquid crystals
Analysis of Compressibility Effects and Nonlinear Property Variations in a Supercritical CO2 Mixing Layer
Calculations are performed using the large eddy simulation technique to qualitatively assess the effects of fluid compressibility and thermodynamic nonlinearities on the dynamics of a supercritical flow field. Resulting data are also used to interrogate instantaneous subfilter-scale fields, as modeled by the mixed-dynamic Smagorinsky closure and gradient diffusion model. A three-dimensional wall-resolved calculation of a spatially evolving mixing layer composed solely of carbon dioxide is performed. This is followed by a coarse grid calculation to examine model performance as a function of resolution. Theoretical analysis indicates that the partial derivatives of density with respect to pressure and temperature are important modulators of the temperature and pressure field evolution, respectively. Results pertaining to subfilter velocity-velocity and velocity-temperature fields indicate that the models are most stressed in the regions where compressibility and thermo-fluid nonlinearities dominate the physics.
Substrate Effects on Electronic Properties of Atomic Chains
Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent elements in future electronics. It was predicted that Si chains were metallic and Mg chains were semiconducting, and a doping method was also discussed. The substrate was assumed to work as a non-interacting template holding the adatoms. However, this scheme requires a low-temperature environment so that the adatoms will not displace from their ideal positions due to unwanted thermal agitation. For better structural stability, we may seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The chemical bonding has two major effects on the chain electronic properties. First, only the remaining s and p orbitals in an adatom not used for the chemical bonding can decide chain band structures, rather than the full set of orbitals previously assumed. Second, because of a possible HOMO energy difference between adatom and substrate atom, semiconducting chains are unintentionally doped. These effects are studied with a self-consistent tight-binding method with universal parameters. With one adatom per unit cell, adatom chains are semiconducting: (1) if adatoms are of group III and form one chemical bond per adatom, or (2) if adatoms are of group IV and form two chemical bonds. 'Me previous result [I I of realizing semiconducting chains by group II adatoms without chemical bonds is consistent with this picture. When the HOMO energy in an adatom is shallower than that in a substrate atom, the entire chain is positively polarized, unintentionally achieving p-type doping. When deeper, the chain is negatively charged, achieving n-type doping.
Effective thermoelastic and thermal properties of unidirectional fiber-reinforced composites and their sensitivity coefficients
Three-dimensional finite element models are used to assess the accuracy of the thermoelastic and thermal properties of unidirectional fiber-reinforced composites predicted by six different micromechanical models. The six models are: simple mechanics of materials type equations, fiber substructuring model, vanishing fiber diameter model, self-consistent model, Mori-Tanaka model, and method of cells. In addition, the finite element models are used to assess the accuracy of derivatives of the effective properties, with respect to each of the constituent material properties and fiber-volume ratio, computed using the six micromechanical models. The predictions of the micromechanical and finite element models for four advanced composite material systems are compared with experimental data. The results obtained in the present study show that the predictions of the Mori-Tanaka model and the method of cells are closer to those of the finite element models than those of all the other micromechanical models.
Analytical and experimental evaluations of the effect of broad property fuels on combustors for commercial aircraft gas turbine engines
Analytical and experimental studies were conducted in three contract activities funded by the National Aeronautics and Space Administration, Lewis Research Center, to assess the impacts of broad property fuels on the design, performance, durability, emissions and operational characteristics of current and advanced combustors for commercial aircraft gas turbine engines. The effect of fuel thermal stability on engine and airframe fuel system was evaluated. Trade-offs between fuel properties, exhaust emissions and combustor life were also investigated. Results indicate major impacts of broad property fuels on allowable metal temperatures in fuel manifolds and injector support, combustor cyclic durability and somewhat lesser impacts on starting characteristics, lightoff, emissions and smoke.
Analytical and experimental evaluations of the effect of broad property fuels on combustors for commercial aircraft gas turbine engines
The impacts of broad property fuels on the design, performance, durability, emissions, and operational characteristics of current and advanced combustors for commercial aircraft gas turbine engines were studied. The effect of fuel thermal stability on engine and airframe fuel system was evaluated. Tradeoffs between fuel properties, exhaust emissions, and combustor life were also investigated. Results indicate major impacts of broad property fuels on allowable metal temperatures in fuel manifolds and injector support, combustor cyclic durability, and somewhat lesser impacts on starting characteristics, lightoff, emissions, and smoke.
Anomalous size effects in the galvanomagnetic properties of zinc caused by compensation.
Anomalous size effects in galvanomagnetic properties of zinc crystal samples caused by compensation
Partitioning of tramp elements Cu and Si in a Ni-based superalloy and their effect on creep properties
An alloy's processing history, including melting, remelting or the choice of stock material, affects its purity and eventually involves tramp element pickup or retention. Herein, variants of a novel Ni-based superalloy were manufactured with different levels of purity. The so-called low purity alloys contained 0.138 wt. % Cu and 0.019 wt. % Si while the Cu and Si levels were below x-ray fluorescence (XRF) detection limits of 0.003 and 0.010 wt. %, respectively, in the high purity ingots. Atom-probe tomography (APT) was carried out and revealed Si partitioning at the following interfaces: grain boundaries, MC carbide/γ, M 3 B 2 boride/$γ$ and M 3 B 2 boride/$γ$'. Copper was found to primarily segregate to the $γ$' precipitates. An average of 2.4 × decrease in creep life and 4.3 × decrease in creep ductility was measured in the low purity alloys, which was attributed to the embrittlement caused by Si segregation to grain boundaries. Furthermore, the positive effect of B on the creep properties was mitigated by the presence of Si. Thermodynamic predictions for the matrix and γ' precipitate compositions represented the trends observed experimentally although the extent of preferential partitioning lacks accuracy. Monte Carlo simulations were performed to describe the partitioning of Cu and Si atoms to either $γ$ or $γ$' phases.
Pd/BEA hydrocarbon traps: Effect of hydrothermal aging on trapping properties and Pd speciation
Not Available
Influence of the Coriolis effect on the properties of scattering resonances in symmetric and asymmetric isotopomers of ozone
This work analyzes rotational–vibrational spectra of scattering resonances in four ozone isotopomers in relation to the symmetry-driven isotope effect.
The effect of vacuum on various mechanical properties of magnesium.
Vacuum effect on tensile, creep and fatigue properties of magnesium polycrystals and on tensile properties of oriented magnesium single crystals
Extinction coefficient (1 micrometer) properties of high-altitude clouds from solar occultation measurements (1985-1990): Evidence of volcanic aerosol effect
The properties of the 1-micrometer volume extinction coefficient of two geographically different high-altitude cloud systems have been examined for the posteruption period (1985-1990) of the April 1982 El Chichon volcanic event with emphasis on the effect of volcanic aerosols on clouds. These two high-altitude cloud systems are the tropical clouds in the tropopause region observed by the Stratospheric Aerosol and Gas Experiment (SAGE) 2 and the polar stratospheric clouds (PSCs) sighted by the Stratospheric Aerosol Measurement (SAM) 2. The results indicate that volcanic aerosols alter the frequency distributions of these high-altitude clouds in such a manner that the occurrence of clouds having high extinction coefficients (6 x 10(exp -3) - 2 x 10(exp -2)/km) is suppressed, while that of clouds having low extinction coefficients (2 x 10(exp -3) - 6 x 10(exp -2)/km) is enhanced. This influence of the volcanic aerosols appears to be opposite to the increase in the extinction coefficient of optically thick clouds observed by the Earth Radiation Budget Experiment (ERBE) during the initial posteruption period of the June 1991 Pinatubo eruption. A plausible explanation of this difference, based on the Mie theory, is presented. As a consequence of the Mie theory, the effective radius of most, if not all, of the high-altitude clouds, measured by the SAGE series of satellite instruments must be less than about 0.8 micrometers. This mean cloud particle size implied by the satellite extinction-coefficient data at a single wavelength (1 micrometer) is further substantiated by the particle size analysis based on cloud extinction coefficient at two wavelengths (0.525 and 1.02 micrometers) obtained by the SAGE 2 observations. Most of the radiation measured by ERBE is reflected by cloud systems comprised of particles having effective radii much greater than 1 micrometer. A reduction in the effective radius of these clouds due to volcanic aerosols is expected to increase their extinction-coefficient values, opposite the effect observed by SAGE 2 and SAM 2. This work further illustrates the capability of the solar occultation satellite sensor to provide particulate extinction-coefficient measurements important to the study of the aerosol-cloud interactions. It is important to examine the variations of the extinction coefficient of these two high-altitude cloud systems for the posteruption years of the Pinatubo volcanic event for further evidence of the impact of volcanic aerosols on high-altitude clouds.
On Fully Developed Channel Flows: Some Solutions and Limitations, and Effects of Compressibility, Variable Properties, and Body Forces
An examination of the effects of compressibility, variable properties, and body forces on fully developed laminar flow has indicated several limitations on such streams. In the absence of a pressure gradient, but presence of a body force (e.g., gravity), an exact fully developed gas flow results. For a liquid this follows also for the case of a constant streamwise pressure gradient. These motions are exact in the sense of a Couette flow. In the liquid case two solutions (not a new result) can occur for the same boundary conditions. An approximate analytic solution was found which agrees closely with machine calculations.In the case of approximately exact flows, it turns out that for large temperature variations across the channel the effects of convection (due to, say, a wall temperature gradient) and frictional heating must be negligible. In such a case the energy and momentum equations are separated, and the solutions are readily obtained. If the temperature variations are small, then both convection effects and frictional heating can consistently be considered. This case becomes the constant-property incompressible case (or quasi-incompressible case for free-convection flows) considered by many authors. Finally there is a brief discussion of cases wherein streamwise variations of all quantities are allowed but only a such form that independent variables are separable. For the case where the streamwise velocity varies inversely as the square root distance along the channel a solution is given.
A study of the effect of selected material properties on the ablation performance of artificial graphite
Eighteen material properties were measured on 45 different, commercially available, artificial graphites. Ablation performance of these same graphites were also measured in a Mach 2 airstream at a stagnation pressure of 5.6 atm. Correlations were developed, where possible, between pairs of the material properties. Multiple regression equations were then formulated relating ablation performance to the various material properties, thus identifying those material properties having the strongest effect on ablation performance. These regression equations reveal that ablation performance in the present test environment depends primarily on maximum grain size, density, ash content, thermal conductivity, and mean pore radius. For optimization of ablation performance, grain size should be small, ash content low, density and thermal conductivity high, and mean pore radius large.
Jet fuel property changes and their effect on producibility and cost in the U.S., Canada, and Europe
The effects of changes in properties and blending stocks on the refinery output and cost of jet fuel in the U.S., Canada, and Europe were determined. Computerized refinery models that minimize production costs and incorporated a 1981 cost structure and supply/demand projections to the year 2010 were used. Except in the West U.S., no changes in jet fuel properties were required to meet all projected demands, even allowing for deteriorating crude qualities and changes in competing product demand. In the West U.S., property changes or the use of cracked blendstocks were projected to be required after 1990 to meet expected demand. Generally, relaxation of aromatics and freezing point, or the use of cracked stocks produced similar results, i.e., jet fuel output could be increased by up to a factor of three or its production cost lowered by up to $10/cu m. High quality hydrocracked stocks are now used on a limited basis to produce jet fuel. The conversion of U.S. and NATO military forces from wide-cut to kerosene-based jet fuel is addressed. This conversion resulted in increased costs of several hundred million dollars annually. These costs can be reduced by relaxing kerosene jet fuel properties, using cracked stocks and/or considering the greater volumetric energy content of kerosene jet fuel.
Effects of porosity on mechanical properties of aluminum welds
Porosity effects on mechanical properties of Al alloy gas tungsten arc welds, noting strength loss proportional to cross sectional area loss
Composite space antenna structures: Properties and environmental effects
The thermal behavior of composite spacecraft antenna reflectors has been investigated with the integrated Composites Analyzer (ICAN) computer code. Parametric studies have been conducted on the face sheets and honeycomb core which constitute the sandwich-type structures. Selected thermal and mechanical properties of the composite faces and sandwich structures are presented graphically as functions of varying fiber volume ratio, temperature, and moisture content. The coefficients of thermal expansion are discussed in detail since these are the critical design parameters. In addition, existing experimental data are presented and compared to the ICAN predictions.