Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ERUPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

INTERCHANGE RECONNECTION FORCED BY THE FILAMENT ERUPTION INSIDE A PSEUDO-STREAMER

We present rare observational signatures of interchange reconnection (IR) forced by the filament eruption inside a pseudo-streamer (PS). The PS was centered above a positive-polarity region bounded by two negative-polarity coronal holes (CHs), and thus its base contained two polarity inversion lines and a pair of loop arcades where two filaments were harbored. In white-light coronagraph data from two different views, it showed up as a fan-shaped structure consisting of fine rays and a coronal streamer. Followed by a two-ribbon flare and a coronal mass ejection, one of the filaments and its overlying arcade erupted away from the nearby CH and flew over the other arcade to interact with the PS's remote CH. As a result, distinct ribbon-like remote brightenings formed along the remote CH boundary and were connected to the positive-polarity flare ribbon by a loop system, but the nearby open-field region largely remained unchanged except that compact brightenings and a following small coronal dimming appeared close to one end of the erupted filament. In combination with the coronal magnetic configuration that derived from the potential-field source-surface model, these observations can be interpreted as follows: the erupting field was first deflected and guided by the nearby CH's open field and then reconnected with the oppositely oriented open field of the remote CH, during which both the closed field bridging the erupted filament and the remoter CH's open field were transported in the opposite direction. The observations thus supported the idea that PSs provide favorable environments for IR to take place and remote brightenings along their CH boundaries represent a credible IR signature on the solar surface.

79 ASTRONOMY AND ASTROPHYSICS↗

DIRECT SPATIAL ASSOCIATION OF AN X-RAY FLARE WITH THE ERUPTION OF A SOLAR QUIESCENT FILAMENT

Solar flares primarily occur in active regions. Hard X-ray flares have been found to occur only in active regions. They are often associated with the eruption of active region filaments and coronal mass ejections (CMEs). CMEs can also be associated with the eruption of quiescent filaments, not located in active regions. Here we report the first identification of a solar X-ray flare outside an active region observed by the Ramaty High Energy Solar Spectroscopic Imager (RHESSI). The X-ray emission was directly associated with the eruption of a long, quiescent filament and fast CME. Images from RHESSI show this flare emission to be located along a section of the western ribbon of the expanding, post-eruption arcade. EUV images from the Solar Dynamics Observatory Atmospheric Imaging Assembly show no connection between this location and nearby active regions. Therefore the flare emission is found not to be located in or associated with an active region. However, a nearby, small, magnetically strong dipolar region provides a likely explanation for the existence and location of the flare X-ray emission. This emerging dipolar region may have also triggered the filament eruption.

79 ASTRONOMY AND ASTROPHYSICS↗

MULTIWAVELENGTH OBSERVATIONS OF A PARTIALLY ERUPTIVE FILAMENT ON 2011 SEPTEMBER 8

In this paper, we report our multiwavelength observations of a partial filament eruption event in NOAA active region (AR) 11283 on 8 September 2011. A magnetic null point and the corresponding spine and separatrix surface are found in the AR. Beneath the null point, a sheared arcade supports the filament along the highly complex and fragmented polarity inversion line. After being activated, the sigmoidal filament erupted and split into two parts. The major part rose at speeds of 90–150 km s{sup −1} before reaching the maximum apparent height of ∼115 Mm. Afterward, it returned to the solar surface in a bumpy way at speeds of 20–80 km s{sup −1}. The rising and falling motions were clearly observed in the extreme-ultraviolet, UV, and Hα wavelengths. The failed eruption of the main part was associated with an M6.7 flare with a single hard X-ray source. The runaway part of the filament, however, separated from and rotated around the major part for ∼1 turn at the eastern leg before escaping from the corona, probably along large-scale open magnetic field lines. The ejection of the runaway part resulted in a very faint coronal mass ejection that propagated at an apparent speed of 214 km s{sup −1} in the outer corona. The filament eruption also triggered a transverse kink-mode oscillation of the adjacent coronal loops in the same AR. The amplitude and period of the oscillation were 1.6 Mm and 225 s. Our results are important for understanding the mechanisms of partial filament eruptions, and provide new constraints to theoretical models. The multiwavelength observations also shed light on space weather prediction.

79 ASTRONOMY AND ASTROPHYSICS↗

A CIRCULAR-RIBBON SOLAR FLARE FOLLOWING AN ASYMMETRIC FILAMENT ERUPTION

The dynamic properties of flare ribbons and the often associated filament eruptions can provide crucial information on the flaring coronal magnetic field. This Letter analyzes the GOES-class X1.0 flare on 2014 March 29 (SOL2014-03-29T17:48), in which we found an asymmetric eruption of a sigmoidal filament and an ensuing circular flare ribbon. Initially both EUV images and a preflare nonlinear force-free field model show that the filament is embedded in magnetic fields with a fan-spine-like structure. In the first phase, which is defined by a weak but still increasing X-ray emission, the western portion of the sigmoidal filament arches upward and then remains quasi-static for about five minutes. The western fan-like and the outer spine-like fields display an ascending motion, and several associated ribbons begin to brighten. Also found is a bright EUV flow that streams down along the eastern fan-like field. In the second phase that includes the main peak of hard X-ray (HXR) emission, the filament erupts, leaving behind two major HXR sources formed around its central dip portion and a circular ribbon brightened sequentially. The expanding western fan-like field interacts intensively with the outer spine-like field, as clearly seen in running difference EUV images. We discuss these observations in favor of a scenario where the asymmetric eruption of the sigmoidal filament is initiated due to an MHD instability and further facilitated by reconnection at a quasi-null in corona; the latter is in turn enhanced by the filament eruption and subsequently produces the circular flare ribbon.

79 ASTRONOMY AND ASTROPHYSICS↗

PRE-ERUPTION OSCILLATIONS IN THIN AND LONG FEATURES IN A QUIESCENT FILAMENT

We investigate the eruption of a quiescent filament located close to an active region. Large-scale activation was observed in only half of the filament in the form of pre-eruption oscillations. Consequently only this half erupted nearly 30 hr after the oscillations commenced. Time-slice diagrams of 171 Å images from the Atmospheric Imaging Assembly were used to study the oscillations. These were observed in several thin and long features connecting the filament spine to the chromosphere below. This study traces the origin of such features and proposes their possible interpretation. Small-scale magnetic flux cancellation accompanied by a brightening was observed at the footpoint of the features shortly before their appearance, in images recorded by the Helioseismic and Magnetic Imager. A slow rise of the filament was detected in addition to the oscillations, indicating a gradual loss of equilibrium. Our analysis indicates that a change in magnetic field connectivity between two neighbouring active regions and the quiescent filament resulted in a weakening of the overlying arcade of the filament, leading to its eruption. It is also suggested that the oscillating features are filament barbs, and the oscillations are a manifestation during the pre-eruption phase of the filaments.

79 ASTRONOMY AND ASTROPHYSICS↗

Imaging Observations of Magnetic Reconnection in a Solar Eruptive Flare

Solar flares are among the most energetic events in the solar atmosphere. It is widely accepted that flares are powered by magnetic reconnection in the corona. An eruptive flare is usually accompanied by a coronal mass ejection, both of which are probably driven by the eruption of a magnetic flux rope (MFR). Here we report an eruptive flare on 2016 March 23 observed by the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory . The extreme-ultraviolet imaging observations exhibit the clear rise and eruption of an MFR. In particular, the observations reveal solid evidence of magnetic reconnection from both the corona and chromosphere during the flare. Moreover, weak reconnection is observed before the start of the flare. We find that the preflare weak reconnection is of tether-cutting type and helps the MFR to rise slowly. Induced by a further rise of the MFR, strong reconnection occurs in the rise phases of the flare, which is temporally related to the MFR eruption. We also find that the magnetic reconnection is more of 3D-type in the early phase, as manifested in a strong-to-weak shear transition in flare loops, and becomes more 2D-like in the later phase, as shown by the apparent rising motion of an arcade of flare loops.

79 ASTRONOMY AND ASTROPHYSICS↗

Coronal Jets from Minifilament Eruptions in Active Regions

Solar coronal jets are transient (frequently of lifetime approx.10 min) features that shoot out from near the solar surface, become much longer than their width, and occur in all solar regions, including coronal holes, quiet Sun, and active regions (e.g., Shimojo et al. 1996, Cirtain et al. 2007). Sterling et al. (2015) and other studies found that in coronal holes and in quiet Sun the jets result when small-scale filaments, called "minifilaments" erupt onto nearby open or high-reaching field lines. Additional studies found that coronal-jet-onset locations (and hence presumably the minifilament-eruption-onset locations) coincided with locations of magnetic-flux cancelation. For active region (AR) jets however the situation is less clear. Sterling et al. (2016) studied jets in one active region over a 24-hour period; they found that some AR jets indeed resulted from minifilament eruptions, usually originating from locations of episodes of magnetic-flux cancelation. In some cases however they could not determine whether flux was emerging or canceling at the polarity inversion line from which the minifilament erupted, and for other jets of that region minifilaments were not conclusively apparent prior to jet occurrence. Here we further study AR jets, by observing them in a single AR over a one-week period, using X-ray images from Hinode/XRT and EUV/UV images from SDO/AIA, and line-of-sight magnetograms and white-light intensity-grams from SDO/HMI. We initially identified 13 prominent jets in the XRT data, and examined corresponding AIA and HMI data. For at least several of the jets, our findings are consistent with the jets resulting from minifilament eruptions, and originating from sites of magnetic-field cancelation.

region↗

Sampling the ENSO response to tropical volcanic eruptions in the GISS-E2-1 model: physical & biogeochemical ocean effects

Despite observational evidence that an El-Niño is likely to follow tropical volcanic eruptions (Predybaylo et al, 2017), modelling studies have so far reached no consensus on either the sign or physical mechanism of El Niño response to volcanism (Khodri et al, 2017) . A previous modelling study found that following the Pinatubo eruption, the tropical Pacific developed El Niño-like conditions that triggered a decrease in the upwelling of DIC and increased carbon uptake (Eddebbar et al., 2019). However, the carbon cycle response to volcanisms as it depends on ENSO phase remains unclear. Here we perform thirty ensemble control simulations using the GISS-E2-1-G model to sample the pre-industrial control ENSO cycle and thirty more to superimpose a Pinatubo-like volcanic eruption. We find that the model tends to favor the development of a weak El-Niño following the volcanic eruption only in the case of a volcano that erupts at the start of a neutral ENSO phase. In response to the weak El-Niño, some anomalies have the same sign as those that develop from a strong El-Niño, such as weaker winds, shallower mixed layer depths, less direct but more diffuse radiation at the surface of the ocean, less nitrate, and lower primary productivity. However, other anomalies show the opposite sign as those from a strong El-Niño, such as more precipitation, less surface DIC, and less surface ocean pCO 2 . In contrast to the neutral phase, the volcanic response during positive ENSO and negative ENSO phases are swamped by the model’s internal variability.

ENSO↗

Deep and shallow sources for the Lusi mud eruption revealed by surface deformation

The Lusi mud eruption, in East Java, Indonesia, began in May 2006 and continues to the present. Previous analyses of surface deformation data suggested an exponential decay of the pressure in the mud source but did not constrain the location, geometry, and evolution of the possible source(s) of the erupting mud and fluids. To map the surface deformation, we employ multitemporal interferometric synthetic aperture radar and analyze a well-populated L-band data set acquired by the Advanced Land Observing Satellite (ALOS) between May 2006 and April 2011. We then apply a time-dependent inverse modeling scheme. Volume changes occur in two regions beneath Lusi, at 0.3-2.0km and 3.5-4.75km depth. The cumulative volume change within the shallow source is ~2-3 times larger than that of the deep source. The observation and model suggest that a shallow source plays a key role by supplying the erupting mud, but that additional fluids do ascend from depths >4km on eruptive timescales. Key Points Spatiotemporal map of the surface deformation associated with Lusi mud eruption Time-dependent source model of the Lusi and nearby gas field Revealing the deep and shallow sources of the Lusi and characterizing their relationship.

58 GEOSCIENCES↗

Volcanic lightning and plume behavior reveal evolving hazards during the April 2015 eruption of Calbuco Volcano, Chile

Soon after the onset of an eruption, model forecasts of ash dispersal are used to mitigate the hazards to aircraft, infrastructure, and communities downwind. However, it is a significant challenge to constrain the model inputs during an evolving eruption. Here we demonstrate that volcanic lightning may be used in tandem with satellite detection to recognize and quantify changes in eruption style and intensity. Using the eruption of Calbuco volcano in southern Chile on 22 and 23 April 2015, we investigate rates of umbrella cloud expansion from satellite observations, occurrence of lightning, and mapped characteristics of the fall deposits. Our remote sensing analysis gives a total erupted volume that is within uncertainty of the mapped volume (0.56 ± 0.28 km3 bulk). Furthermore, observations and volcanic plume modeling further suggest that electrical activity was enhanced both by ice formation in the ash clouds >10 km above sea level and development of a low-level charge layer from ground-hugging currents.

58 GEOSCIENCES↗

Topographic controls on a phreatomagmatic maar-diatreme eruption: field and numerical results from the Holocene Dotsero volcano (Colorado, USA)

We analyzed the eruptive products of Holocene Dotsero volcano (Colorado, USA; ~4.15 ka), which recorded evidence of a progression from effusive magmatic activity through explosive phreatomagmatic maar-forming activity to a final explosive magmatic phase. The nature of the deposits suggests that the irregular and mountainous pre-eruptive topography strongly influenced the formation of directed pyroclastic density currents (PDCs) during the phreatomagmatic phase, where the topographically high northern crater rim acted as a barrier and promoted transport to the south. Furthermore, the crater shape strongly controlled the grain size of the final deposits, providing further evidence that deposit grain size can be a misleading proxy for fragmentation or explosion intensity. We test these hypotheses, as gleaned from fieldwork, by implementing a multiphase numerical model to simulate discrete explosions and their resulting PDCs at maar-diatreme volcanoes. We confirm that a crater shape where one rim is higher than the other promotes multiple pulses of particle transport in the direction of the lower rim. The initial PDCs contain both coarse and fine particles, whereas PDCs generated by later pulses contain, predominately, finer particles. This mechanism provides an alternative explanation to the formation of lapilli tuff/tuff couplets often found at maar-diatreme tephra rings (including Dotsero volcano). Additional modeling shows how the crater depth can control grain size of the resulting PDC deposits. In the case of a deep crater and a relatively weak explosion, it is possible that only the fine particles escape following collapse of the eruptive column, resulting in a fine-grained deposit. This work allows us to improve models developed to describe emplacement of PDCs for different crater geometries and informs on the dynamics of maar-diatreme eruptions, but also highlights the limitations of our knowledge of key parameters, especially those related to the processes of magma-water interaction and syn-eruptive hydrogeology, during such events.

58 GEOSCIENCES↗

Volcanoes Erupt Stressed Quartz Crystals

Volcanic eruptions are energetic events driven by the imbalance of magmatic forces. The magnitudes of these forces remain poorly constrained because they operate in regions that are inaccessible, either underground or dangerous to approach. New techniques are needed to quantify the processes that drive eruptions and to probe magma storage conditions. Here we present X-ray microdiffraction measurements of volcanic stress imparted as lattice distortions to the crystal cargo of magma from Yellowstone and Long Valley eruptions. Elevated residual stresses between 100 and 300 MPa are preserved in erupted quartz. Multiple volcanic forces could be culpable for the deformation so we analyzed crystals from pyroclastic falls, pyroclastic density currents, and effusive lavas. In conclusion, stresses are preserved in all quartz but cannot be attributed to differences in eruption style. Instead, lattice deformation likely preserves an in situ measurement of the deviatoric stresses required for the brittle failure of viscous, crystal-bearing glass during ascent.

58 GEOSCIENCES↗

Robust Multiyear Climate Impacts of Volcanic Eruptions in Decadal Prediction Systems

Abstract Major tropical volcanic eruptions have a large impact on climate, but there have only been three major eruptions during the recent relatively well‐observed period. Models are therefore an important tool to understand and predict the impacts of an eruption. This study uses five state‐of‐the‐art decadal prediction systems that have been initialized with the observed state before volcanic aerosols are introduced. The impact of the volcanic aerosols is found by subtracting the results of a reference experiment where the volcanic aerosols are omitted. We look for the robust impact across models and volcanoes by combining all the experiments, which helps reveal a signal even if it is weak in the models. The models used in this study simulate realistic levels of warming in the stratosphere, but zonal winds are weaker than the observations. As a consequence, models can produce a pattern similar to the North Atlantic Oscillation in the first winter following the eruption, but the response and impact on surface temperatures are weaker than in observations. Reproducing the pattern, but not the amplitude, may be related to a known model error. There are also impacts in the Pacific and Atlantic Oceans. This work contributes toward improving the interpretation of decadal predictions in the case of a future large tropical volcanic eruption.

54 ENVIRONMENTAL SCIENCES↗

Global Temperature Responses to Large Tropical Volcanic Eruptions in Paleo Data Assimilation Products and Climate Model Simulations Over the Last Millennium

Abstract Large volcanic eruptions are one of the dominant perturbations to global and regional atmospheric temperatures on timescales of years to decades. Discrepancies remain, however, in the estimated magnitude and persistence of the surface temperature cooling caused by volcanic eruptions, as characterized by paleoclimatic proxies and climate models. We investigate these discrepancies in the context of large tropical eruptions over the Last Millennium using two state‐of‐the‐art data assimilation products, the Paleo Hydrodynamics Data Assimilation product (PHYDA) and the Last Millennium Reanalysis (LMR), and simulations from the National Center for Atmospheric Research Community Earth System Model‐Last Millennium Ensemble (NCAR CESM‐LME). We find that PHYDA and LMR estimate mean global and hemispheric cooling that is similar in magnitude and persistence once effects from eruptions occurring in short succession are removed. The estimates also compare well to Northern‐Hemisphere reconstructions based solely or partially on tree‐ring density, which have been proposed as the most accurate proxy estimates of surface cooling due to volcanism. All proxy‐based estimates also agree well with the magnitude of the mean cooling simulated by the CESM‐LME. Differences remain, however, in the spatial patterns of the temperature responses in the PHYDA, LMR, and the CESM‐LME. The duration of cooling anomalies also persists for several years longer in the PHYDA and LMR relative to the CESM‐LME. Our results demonstrate progress in resolving discrepancies between proxy‐ and model‐based estimates of temperature responses to volcanism, but also indicate these estimates must be further reconciled to better characterize the risks of future volcanic eruptions.

Tejedor, E.↗

OBSERVATIONS FROM SDO, HINODE, AND STEREO OF A TWISTING AND WRITHING START TO A SOLAR-FILAMENT-ERUPTION CASCADE

We analyze data from SDO (AIA, HMI), Hinode (SOT, XRT, EIS), and STEREO (EUVI) of a solar eruption sequence of 2011 June 1 near 16:00 UT, with an emphasis on the early evolution toward eruption. Ultimately, the sequence consisted of three emission bursts and two filament ejections. SDO/AIA 304 A images show absorbing-material strands initially in close proximity which over {approx}20 minutes form a twisted structure, presumably a flux rope with {approx}10{sup 29} erg of free energy that triggers the resulting evolution. A jump in the filament/flux rope's displacement (average velocity {approx}20 km s{sup -1}) and the first burst of emission accompanies the flux-rope formation. After {approx}20 more minutes, the flux rope/filament kinks and writhes, followed by a semi-steady state where the flux rope/filament rises at ({approx}5 km s{sup -1}) for {approx}10 minutes. Then the writhed flux rope/filament again becomes MHD unstable and violently erupts, along with rapid (50 km s{sup -1}) ejection of the filament and the second burst of emission. That ejection removed a field that had been restraining a second filament, which subsequently erupts as the second filament ejection accompanied by the third (final) burst of emission. Magnetograms from SDO/HMI and Hinode/SOT, and other data, reveal several possible causes for initiating the flux-rope-building reconnection, but we are not able to say which is dominant. Our observations are consistent with magnetic reconnection initiating the first burst and the flux-rope formation, with MHD processes initiating the further dynamics. Both filament ejections are consistent with the standard model for solar eruptions.

79 ASTRONOMY AND ASTROPHYSICS↗

The largest deep-ocean silicic volcanic eruption of the past century

In this paper, the 2012 submarine eruption of Havre volcano in the Kermadec arc, New Zealand, is the largest deep-ocean eruption in history and one of very few recorded submarine eruptions involving rhyolite magma. It was recognized from a gigantic 400-km 2 pumice raft seen in satellite imagery, but the complexity of this event was concealed beneath the sea surface. Mapping, observations, and sampling by submersibles have provided an exceptionally high fidelity record of the seafloor products, which included lava sourced from 14 vents at water depths of 900 to 1220 m, and fragmental deposits including giant pumice clasts up to 9 m in diameter. Most (>75%) of the total erupted volume was partitioned into the pumice raft and transported far from the volcano. The geological record on submarine volcanic edifices in volcanic arcs does not faithfully archive eruption size or magma production.

54 ENVIRONMENTAL SCIENCES↗

U-Pb constraints on pulsed eruption of the Deccan Traps across the end-Cretaceous mass extinction

Temporal correlation between some continental flood basalt eruptions and mass extinctions has been proposed to indicate causality, with eruptive volatile release driving environmental degradation and extinction. In this work, we tested this model for the Deccan Traps flood basalt province, which, along with the Chicxulub bolide impact, is implicated in the Cretaceous-Paleogene (K-Pg) extinction approximately 66 million years ago. We estimated Deccan eruption rates with uranium-lead (U-Pb) zircon geochronology and resolved four high-volume eruptive periods. According to this model, maximum eruption rates occurred before and after the K-Pg extinction, with one such pulse initiating tens of thousands of years prior to both the bolide impact and extinction. Finally, these findings support extinction models that incorporate both catastrophic events as drivers of environmental deterioration associated with the K-Pg extinction and its aftermath.

58 GEOSCIENCES↗

Interchange Reconnection Associated with a Confined Filament Eruption: Implications for the Source of Transient Cold-dense Plasma in Solar Winds

The cold-dense plasma is occasionally detected in the solar wind with in situ data, but the source of the cold-dense plasma remains illusive. Interchange reconnections (IRs) between closed fields and nearby open fields are known to contribute to the formation of solar winds. We present a confined filament eruption associated with a puff-like coronal mass ejection (CME) on 2014 December 24. The filament underwent successive activations and finally erupted, due to continuous magnetic flux cancelations and emergences. The confined erupting filament showed a clear untwist motion, and most of the filament material fell back. During the eruption, some tiny blobs escaped from the confined filament body, along newly formed open field lines rooted around the south end of the filament, and some bright plasma flowed from the north end of the filament to remote sites at nearby open fields. The newly formed open field lines shifted southward with multiple branches. The puff-like CME also showed multiple bright fronts and a clear southward shift. All the results indicate an intermittent IR existed between closed fields of the confined erupting filament and nearby open fields, which released a portion of filament material (blobs) to form the puff-like CME. We suggest that the IR provides a possible source of cold-dense plasma in the solar wind.

79 ASTRONOMY AND ASTROPHYSICS↗