Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EDX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Densification of W–Ni–Fe powders using laser sintering

In this paper, Laser Sintering (LS) of 90%W–7%Ni–3%Fe (wt.%) powders have been investigated, with the goal to understand the influence of final density by laser power, scanning speed, laser trace width, and the number of scanning passes. The results suggest that the laser power and scanning speed are the most important factors influencing density; the influence of trace width and number of scanning passes are not significant. With the increase of laser power and decrease of scanning speed, higher density can be achieved. Additionally, the microstructure analysis indicated that the porosity changed from open porosity to closed porosity with higher laser energy input. Energy-Dispersive X-ray Spectroscopy (EDX) analysis shows that during the sintering process, W was not melted but dissolved into the Ni–Fe matrix. Contact flattening and grain accommodation of W grains have been observed. It suggests that both rearrangement and solution-reprecipitation mechanisms are responsible for the densification. The sintered density with respect to laser power and scanning speed was modeled by continuum modeling theory and compared with experimental results.

42 ENGINEERING↗

From ammonium Hexahalorhenates(IV) to nanocrystalline rhenium metal: A combined thermal, diffraction and microscopic analysis

Rhenium metal powder is a material of industrial importance. Several industrial and laboratory methods have been developed for the preparation of ultrafine Re metal powder and nanoparticles. The present study provides a better understanding of the characteristic and formation of Re metal powder from the decomposition of (NH4)2ReX6 salt (X = F, Cl, Br, I) at high temperature in inert atmosphere. Such analysis resulted in the formation of nanocrystalline Re metal as characterized by powder XRD. Williamson-Hall, Scherrer, and Williamson-Smallman methods were employed to study the effect of crystallize size, lattice strain, and dislocation density as analyzed from powder XRD peak broadening. Here, the morphology and composition of the metal were analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy.

36 MATERIALS SCIENCE↗

Elucidating the role of surface species in CO oxidation catalyzed by boron nitride nanotube supported transition metal oxides

Boron nitride nanotube (BNNT) is considered a highly promising catalyst support due to its outstanding thermal stability and chemical inertness. These characteristics make BNNT an attractive alternative for high-temperature applications. However, most studies to date have focused on incorporating platinum group metals (PGMs) to achieve high activity. Although BNNT-supported PGM catalysts are highly effective, their scarcity and high cost hinder widespread use in industrial processes. In this study, BNNT-supported transition metal oxides (TMO x /BNNT; TM = Fe, Co, Ni, and Cu) catalysts were investigated, and CO oxidation was applied as a model reaction to evaluate their catalytic performance. Several characterization techniques, including SEM-EDX, TEM, SXRD, H 2 -TPR, and XPS, were employed to examine their physicochemical properties. Notably, the particle size of the metal oxides differed significantly depending on the metal type. This variation is primarily attributed to the inherent metal–support interactions and the thermodynamic stability of each oxide during synthesis. These properties also affected catalytic activity, and various parameters, such as oxygen mobility and redox behavior, played important roles in determining performance. Finally, in situ DRIFTS, CO-TPSR, reaction-order analysis, and 18 O 2 isotope-labeling experiment were used to investigate the reaction mechanism. In conclusion, the findings provide insights into the design of cost-effective BNNT-supported catalysts and highlight their potential applicability in oxidation reactions.

36 MATERIALS SCIENCE↗

Low-pressure methanol synthesis from CO 2 over metal-promoted Ni-Ga intermetallic catalysts

Ni-Ga and M-Ni-Ga (M = Au, Co, Cu) catalysts were evaluated for methanol synthesis from CO 2 at 10 bar and 200-270°C. The following trend in turnover frequency (TOF) for CO 2 hydrogenation was observed: AuNiGa > CuNiGa > NiGa > CoNiGa, where TOF increased with decreasing catalyst affinity for CO. The presence of a third metal was found to influence both the formation of the Ni-Ga intermetallic phase as well as the number of available sites for CO chemisorption. Phase formation, catalyst composition and stability were evaluated using therm ogravimetric analysis (TGA), X-ray diffraction (XRD), X-ray fluorescence (XRF), scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM-EDX). Au-Ni-Ga, which showed a nearly 4-fold improvement in TOF at 263°C and 10 bar compared to Ni-Ga, consisted of Ni 3 Ga particles decorated with Au, as evidenced by post catalysis characterization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reclamation of niobium compounds from ionic liquid electrochemical polishing of superconducting radio frequency cavities

Recent research has shown that choline chloride (vitamin B4)-based solutions can be used as a greener alternative to acid-based electrochemical polishing solutions. This study demonstrated a successful method for electrochemical deposition of niobium compounds onto the surface of copper substrates using a novel choline chloride-based ionic liquid. Niobium ions present in the ionic liquid solution were dissolved into the solution prior to deposition via electrochemical polishing of solid niobium. A black coating was clearly visible on the surface of the Cu following deposition. This coating was analyzed using scanning electron microscopy (SEM), electron dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and X-ray fluorescence spectroscopy (XRF). This ionic liquid-based electrochemical deposition method effectively recycles previously dissolved niobium from electrochemical polishing of superconducting radio frequency (SRF) cavities.

36 MATERIALS SCIENCE↗

Influence of hydrogen peroxide in enhancing photocatalytic activity of carbon nitride under visible light: An insight into reaction intermediates

Carbon nitride is a known photocatalyst that can be activated under visible light irradiation. In this study, the combined effect of carbon nitride and hydrogen peroxide in photocatalytic degradation of methylene blue (MB) in water was investigated under visible light. Carbon nitride was synthesized by thermal polymerization of dicyandiamide and characterized by x-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), Energy dispersive x-ray (EDX), Fourier transform infrared spectroscopy (FTIR) and pore textural properties. The kinetic study of degradation of MB with carbon nitride and in presence of hydrogen peroxide showed complete degradation of MB before 45 min of time interval. The kinetic studies were also performed by varying the dose of photocatalyst and initial concentration of MB and it was shown that higher dose of photocatalyst and lower concentration of MB resulted in higher rate of degradation. The dual role of hydrogen peroxide can be related to the generation of additional highly reactive hydroxyl radicals in presence of photocatalyst and prevention of recombination of holes and electrons of carbon nitride thereby improving its photocatalytic activity. The pH study revealed that neutral pH of the solution results in the highest rate of degradation. Lastly, analysis of liquid chromatography–mass spectroscopy (LCMS) results helped to reveal the reaction steps of photocatalysis of MB and it was found that the four stages of photodegradation of MB were demethylation, ring shortening, ring opening and complete mineralization.

36 MATERIALS SCIENCE↗

Interaction of magnesia-carbon refractory with metallic iron under flash ironmaking conditions

The interaction of a magnesia-carbon refractory with iron under flash ironmaking conditions has been investigated in this work. Oxidation of carbon from the magnesia-carbon refractory took place and the formation of magnesiowustite (Mg x Fe 1-x O) solid solution occurred as a result of the interaction between magnesia (MgO) in the refractory with iron (Fe). A kinetics model for the growth of magnesiowustite (Mg x Fe 1-x O) was developed based on the counterdiffusion of Fe 2+ and Mg 2+ cations through it. Experiments were conducted with iron powder and magnesia-carbon refractory in the temperature range 1200–1400 °C under gas atmospheres relevant to flash ironmaking and analyses of reacted samples using SEM-EDX and EPMA techniques confirmed the formation of magnesiowustite (Mg x Fe 1-x O). Using the kinetics model and the composition profiles determined with EPMA, the values of interdiffusion coefficient ( D ¯ F e - M g ), averaged over the composition range, were calculated. The activation energy ( E a ) for the solid-state diffusion process was determined to be 377 kJ/mol.

36 MATERIALS SCIENCE↗

Sonochemical synthesis of highly luminescent Ln 2 O 3 :Eu 3+ (Y, La, Gd) nanocrystals

In this study, sonication of Ln(CH 3 COO) 3 ·H 2 O, Eu(CH 3 COO) 3 ·H 2 O and NaOH dissolved in the ionic liquid-butyl-3-methylimidazolium bis(trifluoromethane)sulfonylamide lead to Ln(OH) 3 :Eu (Ln: Gd, La, Y) nanoparticles. Subsequent calcination at 800 °C for 3 h allowed to obtain Ln 2 O 3 :Eu nanopowders. Gd 2 O 3 and Y 2 O 3 were obtained in the C-type lanthanide sequioxide structure, whereas La 2 O 3 crystallized in the A-type. Structure, morphology, and luminescent properties of the nano-oxides were investigated by powder X-ray diffraction (PXRD), scanning electron microscopy (SEM), dispersive X-ray (EDX), and photoluminescence (PL). SEM studies revealed that the synthesized Gd 2 O 3 :Eu, La 2 O 3 :Eu, and Y 2 O 3 :Eu formed nano-spindle, -sheets, and -rods in shape, respectively. The nanoscale materials show very efficient red emission due to the intraconfigurational f–f transitions of Eu 3+ . The quantum yields for Ln 2 O 3 :Eu (5%) were determined to be 4.2% for Ln=Gd, 13.8% for Ln=Y and 5.2% for Ln=La. The asymmetric ratio I 02 /I 01 of Eu 3+ varies from 5.3 for Gd 2 O 3 , to 5.6 for Y 2 O 3 to 6.5 for La 2 O 3 , which increased the color chromaticity.

36 MATERIALS SCIENCE↗

LIBS measurement of trace tantalum and rhenium in tungsten for in-situ diagnostic of nuclear transmutation

Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) was applied to tungsten (W)- tantalum (Ta) alloy and W-rhenium (Re) alloy. In the W-Ta alloy measurement, an apparent Ta I line at 648.5 nm was found to be isolated from W I lines and used for the concentration determination. Accurate concentration measurements were achieved for a W - 2 at.% Ta specimen at the ambient gas pressure between 0.1 and 10 Torr of He, Ne and Ar gas. Within these ambient gas species, the highest line intensities were obtained by Ar gas. In the W-Re alloy measurement, the detection limit of trace Re in W-Re was investigated. CF-LIBS results agree well with the nominal concentration of Re down to W-0.5 at.% Re specimen which is better than the measurement accuracy of EDX (energy-dispersive X-ray micro-analysis). Further improvements are required in order to measure 0.2 at.% Re in W expected at ITER.

36 MATERIALS SCIENCE↗

Tensile behavior and microstructural evolution of a Fe-25Ni-20Cr austenitic stainless steel (alloy 709) from room to elevated temperatures through in-situ synchrotron X-ray diffraction characterization and transmission electron microscopy

Uniaxial tensile tests were done on Fe-25Ni-20Cr Austenitic Stainless Steel (Alloy 709) along with in-situ synchrotron measurement at different temperatures (25 degrees C, 500 degrees C, 700 degrees C and 900 degrees C). The X-Ray diffraction data was collected in-situ in order to follow the phases present as well as to derive the dislocation density as a function of strain through peak broadening analysis based on the modified Williamson-Hall method and see how trends are affected as a function of temperature. The XRD data were complemented by TEM and STEM-EDX characterization done on the post-experiment samples to observe the deformed microstructures. Finally, the paper presents a depiction of the tensile behavior of this advanced steel by interpreting the stress-strain curves and the effect of temperature through the information gained by in-situ XRD and TEM observations as well as fractography done ex-situ on the samples tested to rupture.

36 MATERIALS SCIENCE↗

Conducting oxide formation and mechanical endurance of potential solid-oxide fuel cell interconnects in coal syngas environment

The oxidation properties of potential SOFCs materials Crofer 22 APU, Ebrite and Haynes 230 exposed in coal syngas at 800 °C for 100 h were studied. The phases and surface morphology of the oxide scales were characterized by X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray analysis (EDX). The mechanical endurance and electrical resistance of the conducting oxides were characterized by indentation and electrical impedance, respectively. It was found that the syngas exposure caused the alloys to form porous oxide scales, which increased the electrical resistant and decreased the mechanical stability. As for short-term exposure in syngas, neither carbide nor metal dusting was found in the scales of all samples.

01 COAL, LIGNITE, AND PEAT↗

Synthesis, crystal growth, and structure of Ta{sub 3}Al{sub 2}CoC-An ordered quarternary cubic {eta}-carbide and the first single crystal study of a {eta}-carbide

Single crystals of the new carbide Ta{sub 3}Al{sub 2}CoC were synthesised from metallic melt and characterized by XRD, EDX and WDX measurements. The crystal structure of Ta{sub 3}Al{sub 2}CoC was refined on the basis of single crystal data (cF112, Fd3-bar m, a=11.6153(13) A, Z=16, 169 reflections, 13 parameters, R{sub 1}(F)=0.0315, wR{sub 2}(F{sup 2})=0.0857). Ta{sub 3}Al{sub 2}CoC belongs to the great family of {eta}-carbides M{sub 3}M{sub 3}{sup '}C or M{sub 4}M{sub 2}{sup '}C which are important components for cermets. Its crystal structure is characterised by TaC{sub 6}-octahedra, which are connected to a three-dimensional net. Co and Al have icosahedral surroundings without contacts to C-atoms. All positions show full occupation. Ta{sub 3}Al{sub 2}CoC represents the first {eta}-carbide with a complete structure refinement on the basis of single crystal data. - Graphical abstract: Single crystals of the {eta}-carbide Ta{sub 3}Al{sub 2}CoC were grown from a Co-melt. Although {eta}-carbides are technologically very important as a constituent of cermets this is the first report on a single crystal study. The structure analysis of this quarternary variant shows the close similarity to the Ni{sub 2}Ti-structure as an ordering and filling variant. All sites are completely occupied and well ordered. Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid synthesis of tin (IV) oxide nanoparticles by microwave induced thermohydrolysis

Tin oxide nanopowders, with an average size of 5 nm, were prepared by microwave flash synthesis. Flash synthesis was performed in aqueous solutions of tin tetrachloride and hydrochloric acid using a microwave autoclave (RAMO system) specially designed by the authors. Energy dispersive X-ray analysis (EDX), X-ray powder diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, nitrogen adsorption isotherm analysis, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and transmission electron microscopy (TEM), were used to characterize these nanoparticles. Compared with conventional synthesis, nanopowders can be produced in a short period (e.g. 60 s). In addition, high purity and high specific surface area are obtained. These characteristics are fundamental for gas sensing applications. - Graphical abstract: Tin oxide-based gas sensors have been extensively studied in recent years in order to understand and improve their sensing properties to a large variety of gaseous species. As is well known, high specific surface area increase the responses of gas sensors. Microwave-induced thermohydrolysis appears as an efficient way to produce nanoparticles in a very short time, with controlled size (4-5 nm) and high-specific area (160-190 m{sup 2} g{sup -1}). Pictogram represents our original microwave reactor, the RAMO (French acronym of Reacteur Autoclave Micro-Onde), containing the reactants and submitted to the microwave irradiation (multicolour candy represent obtained material), and a typical TEM image of the as-prepared SnO{sub 2} nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A fast low-pressure transport route to large black phosphorus single crystals

Black phosphorus, a promising candidate for lithium battery electrodes, can be prepared by a low-pressure transport reaction route representing the first effective and scalable access to this element modification. Crystal sizes larger than 1 cm were obtained at low-pressure conditions in silica ampoules. X-ray phase analyses, EDX, ICP-MS and optical microscopy were applied to characterize the resulting black phosphorus. The present method drastically improves the traditional preparation ways like mercury catalysis, bismuth-flux or high-pressure techniques and represents an easy, non-toxic, fast and highly efficient method to achieve black phosphorus. In contrast to a previously reported low-pressure route the present transport reaction allows an up-scaling to higher masses of starting materials, a larger black phosphorus yield and faster reaction time under retention of the high product crystallinity. - Graphical abstract: A low-pressure transport reaction route representing the first effective and scalable access to black phosphorus.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ag-Pt alloy nanoparticles with the compositions in the miscibility gap

Silver platinum binary alloys with compositions between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at <{approx} 400 deg. C have largely not been observed in bulk due to the large immiscibility between these two metals. We present in this paper that Ag-Pt alloy nanostructures can be made in a broad composition range. The formation of Ag-Pt nanostructures is studied by powder X-ray diffraction (PXRD) and energy-dispersive X-ray (EDX). Our results indicate that lattice parameter changes almost linearly with composition in these Ag-Pt nanomaterials. In another word, lattice parameter and composition relationship follows the Vegard's law, which is a strong indication for the formation of metal alloys. Our transmission electron microscopy (TEM) study shows that the silver-rich Ag-Pt alloy nanostructures have spherical shape, while the platinum-rich ones possess wire-like morphology. The stability and crystal phase are investigated by annealing the alloy nanostructures directly or on carbon supports. - Graphical abstract: While platinum and silver cannot form a solid solution with the composition between about Ag{sub 2}Pt{sub 98} and Ag{sub 95}Pt{sub 5} at 400 deg. C or below in bulk form, alloy particles and wires can be made within this miscibility gap at the nanometer scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of homo and hetero metal-phosphonate frameworks from bi-functional aminomethylphosphonic acid

The reaction between aminomethylphosphonic acid (ampa) and the metal salts of Zn, Cd, Hg, Pb, Ag, and Cu afforded seven metal-phosphonate polymers with unique structural features and includes the synthesis of a bimetallic metal-organic framework (Cu/Ag). The characterization of these metal phosphonates is reported by means of infrared spectroscopy, {sup 1}H-NMR, {sup 31}P-NMR, X-ray crystallography, energy dispersive X-ray (EDX), and thermogravimetric analysis (TGA). Individual structural features are compared based on the preferred coordination mode of ampa and the geometrical requirements for each metallic center that manipulates the structural motif. - Graphical abstract: The synthesis and characterization of polymeric metal phosphonates featuring zinc, cadmium, mercury, lead, and silver phosphonate are described from the reactions of the bi-funtional aminomethylphosphonic acid with the metal precursor in aqueous conditions. These previously undescribed polymers display unusual structural features and include the synthesis of a bimetallic metal-organic framework (Cu/Ag)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solid solutions of perovskite in the LaO{sub 1.5}-BaO-ScO{sub 1.5}-ZrO{sub 2} system at 1600 deg. C

A partial pseudoternary phase diagram of the LaO{sub 1.5}-BaO-ScO{sub 1.5} system was established at 1600 deg. C. According to the phase diagram, the solubility of barium into the cubic perovskite phase (LaScO{sub 3}) at 1600 deg. C is 0.24 in a mole fraction of barium oxide (X{sub BaO}) on the composition line where the mole fraction of scandium oxide is 0.50. Another cubic perovskite phase (BaZrO{sub 3}) in the BaO-ZrO{sub 2}-ScO{sub 1.5} system is also known. We investigated the phase relationships between the two cubic perovskites in the pseudoquaternary phase diagram of the LaO{sub 1.5}-BaO-ScO{sub 1.5}-ZrO{sub 2} system. As a result, we found the existence of a wide solid solution region between the cubic perovskites at 1600 deg. C. The region was determined by X-ray diffraction (XRD) analysis and energy dispersive X-ray (EDX) microanalysis of samples with various compositions, and established the partial pseudoquaternary phase diagram. - Graphical abstract: The phase boundary of solid solution between lanthanum scandate and barium zirconate at 1600 deg. C was clarified by establishing a partial pseudoquaternary phase diagram of the LaO{sub 1.5}-BaO-ScO{sub 1.5}-ZrO{sub 2} system at 1600 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and luminescent properties of LuBO{sub 3}:Tb{sup 3+} microflowers

Hexagonal vaterite-type LuBO{sub 3}:Tb{sup 3+} microflower-like phosphors have been successfully prepared by an efficient surfactant- and template-free hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectrometry, transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), photoluminescence (PL) and cathodoluminescence (CL) spectra as well as kinetic decays were used to characterize the samples. The as-obtained phosphor samples present flowerlike agglomerates composed of nanoflakes with thickness of 40 nm and high crystallinity in spite of the moderate reaction temperature of 200 deg. C. The reaction mechanism has been considered as a dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. Under ultraviolet excitation into the 4f{sup 8}{yields}4f{sup 7}5d transition of Tb{sup 3+} at 248 nm (or 288 nm) and low-voltage electron beam excitation, LuBO{sub 3}:Tb{sup 3+} samples show the characteristic green emission of Tb{sup 3+} corresponding to {sup 5}D{sub 4}{yields}{sup 7}F{sub 6,5,4,3} transitions with the {sup 5}D{sub 4}{yields}{sup 7}F{sub 5} transition (542 nm) being the most prominent group, which have potential applications in fluorescent lamps and field emission displays. - Graphical abstract: Hexagonal vaterite-type LuBO{sub 3}:Tb{sup 3+} microflower-like phosphors have been successfully prepared by a simple and mild hydrothermal process directly. The reaction mechanism has been considered as the dissolution/precipitation mechanism; the self-assembly evolution process has been proposed on homocentric layer-by-layer growth style. The luminescent properties of the as-obtained LuBO{sub 3}:Tb{sup 3+} samples have been investigated in detail, which shows it is a good green-emitting phosphor in fluorescent lamps and field emission displays potentially.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗