Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOSAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Cu- and Zn-doped alkali activated mortar – Properties and durability in (bio)chemically aggressive wastewater environments

Metakaolin-based alkali activated mortars (AAM) - with and without CuSO{sub 4}·5H{sub 2}O and ZnO addition (mass ratio M{sup n+}/solid binder 0.08% to 1.7%) - were casted and exposed within an extensive long-term field campaign over the period of 20 months to a sewer basin, strongly affected by biogenic acid corrosion. (Un-)exposed AAM were tested regarding their physicochemical and microstructural properties, bioreceptivity and overall durability. Metal addition led to a retarding effect during alkali-activation reaction, as well as to an increase in open porosity of up to 3.0% and corresponding lower compressive strength of up to 10.9%. Reduced microbial colonization and diversity were observed on AAM with Cu, while Zn addition led to increased biodiversity. We propose that the observed higher durability of Cu-doped AAM is due to antibacterial effects and associated reduction of biogenic acid production, superseding overall negative effects of metal-dosage on physical material properties. Observed lower durability of Zn-doped AAM was related to combined negative physicochemical and microbial effects.

36 MATERIALS SCIENCE↗

3D printing of calcined clay-limestone-based cementitious materials

This paper aims to investigate the influences of high Portland cement substitutions (>60 wt%) by low-grade calcined clay (CC) and limestone (LF) on 3D concrete printability, stiffness evolution and early-age hydration. Results show that, with the same dosage of admixtures (superplasticizer and viscosity modifier), increasing LF and CC content reduced the slump, flowability and initial material flow rate, and significantly improved the buildability of fresh mixtures, which can be attributed to the reduced water film thickness (WFT). Furthermore, the stiffness evolution and SSA{sub total} development up to the first 3 h were accelerated by increasing CC content, which can also be linked to the change of WFT, and consumption of superplasticizer for the dispersion induced by hydration products. Additionally, the dilution effect on compressive strength and hydration caused by the high cement replacement was observed.

36 MATERIALS SCIENCE↗

Optimization of matrix viscosity improves polypropylene fiber dispersion and properties of engineered cementitious composites

Engineered cementitious composites (ECC) is a durable cementitious material with high tensile ductility and strain-hardening characteristics. Although considered as a cost-effective fiber for ECC, polypropylene (PP) fiber is reportedly difficult to disperse in mortar matrix due to its high aspect ratio and hydrophobicity. In this study, the matrix viscosity of a low-carbon ECC based on limestone calcined clay cement was tailored as a variable to improve PP fiber dispersion under a pre-determined mixing protocol. The effect of matrix viscosity on the composite fresh and hardened properties was investigated experimentally. Results suggested an optimal range of matrix viscosity (10.3–11.5 Pa . s) favors the composite tensile strength and strain capacity at 28 days. At the optimal state with a 0.1 % viscosity modifying admixture (VMA)-to-binder mass ratio, PP-ECC achieved 7.0 % tensile strain capacity and 3.5 MPa ultimate tensile strength. When matrix viscosity falls outside the desired range, both ultimate tensile strength and strain capacity were diminished. By tailoring the VMA dosage, the matrix viscosity can be adjusted for desired fiber dispersion, workability, and mechanical properties. Finally, the findings of this study provide a technical reference for the practical design and application of PP-ECC.

36 MATERIALS SCIENCE↗

Expansion of Signal Transduction Pathways in Fungi by Extensive Genome Duplication

Plants and fungi use light and other signals to regulate development, growth, and metabolism. The fruiting bodies of the fungus Phycomyces blakesleeanus are single cells that react to environmental cues, including light, but the mechanisms are largely unknown [1]. The related fungus Mucor circinelloides is an opportunistic human pathogen that changes its mode of growth upon receipt of signals from the environment to facilitate pathogenesis [2]. Understanding how these organisms respond to environmental cues should provide insights into the mechanisms of sensory perception and signal transduction by a single eukaryotic cell, and their role in pathogenesis. We sequenced the genomes of P. blakesleeanus and M. circinelloides and show that they have been shaped by an extensive genome duplication or, most likely, a whole-genome duplication (WGD), which is rarely observed in fungi [3–6]. We show that the genome duplication has expanded gene families, including those involved in signal transduction, and that duplicated genes have specialized, as evidenced by differences in their regulation by light. The transcriptional response to light varies with the developmental stage and is still observed in a photoreceptor mutant of P. blakesleea-nus. A phototropic mutant of P. blakesleeanus with a heterozygous mutation in the photoreceptor gene madA demonstrates that photosensor dosage is important for the magnitude of signal transduction. We conclude that the genome duplication provided the means to improve signal transduction for enhanced perception of environmental signals. Our results will help to understand the role of genome dynamics in the evolution of sensory perception in eukaryotes.

Genome, Fungi↗

Combined chlorine dioxide–membrane distillation for the treatment of produced water

Membrane distillation (MD) is a promising technique for desalinating hypersaline brine, such as produced water (PW). To date, fouling and scaling have remained as major challenges for MD implementation. In this study, chlorine dioxide combined with induced air floatation (ClO 2 -IAF) was systematically investigated as a pretreatment prior to MD. First, the ClO 2 generation based on sodium chlorite and hydrochloric acid was optimized to maximize the on-demand ClO 2 production. The maximum production yield of 18.4% was obtained with 4wt.% NaClO 2 and 20wt.% HCl solutions, with a molar ratio of 1:1.25. Then, two real PW samples were pretreated, and removal efficiencies for total suspended solids (TSS), turbidity, iron, and total organic carbon (TOC) were comprehensively studied by varying the ClO 2 dosage between 6 and 91 mg/L. The ClO 2 -IAF pretreatment displayed TSS and turbidity removals above 90% and TOC removal close to 55%. Further, the PW constituents such as benzene, toluene, ethylbenzene, xylene (BTEX), and total petroleum hydrocarbons (TPH) were analyzed and quantified throughout the cascade of the treatments. The volatiles like BTEX were mainly removed by air floatation, while saturated hydrocarbons such as TPH were retained by the hydrophobic membrane. The MD long-term stability without any in-place cleaning was evaluated, and the membrane withstood for twenty two days without wetting, suggesting that optimizing oxidation pretreatment is critical for mitigating the fouling in MD. Results suggest that organic fouling in PW could be effectively reduced by the pretreatment, but further treatment is required to mitigate the scaling, which resulted in MD wetting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modified alkaline peroxide pretreatment: An efficient path forward for bioethanol production from bamboo

To overcome the typical delignification saturation point of alkaline peroxide pretreatment and further facilitate lignin removal, a novel modified alkaline hydrogen peroxide pretreatment (MAHP) was proposed by introducing ethanol into the reaction system. The dosages of H 2 O 2 , ethanol, and pretreatment temperature were optimized, and the results revealed that a maximum lignin removal as high as 79.25% could be achieved at only 100 °C, 3 wt% H 2 O 2 concentration and 1 wt% ethanol concentration. Meanwhile, 76.5% of glucan and 56.0% of xylan were preserved at this pretreatment condition. By overcoming the delignification saturation point, enzymatic hydrolysis efficiency was remarkably enhanced, achieving 96.76% and 97.38% of glucan and xylan conversion, respectively, which are 7.4 and 11.4 times as compared to that of the untreated bamboo. Furthermore, the simultaneous saccharification and fermentation (SSF) result indicated an identical ethanol yield of ~75% when elevating the SSF solid loading from 5% to 30%. Based on the sequential SSF and xylose fermentation results, about 5.6 tons of bamboo would be consumed to produce 1 ton of ethanol. Finally, the energy balance revealed that a positive balance of 1255.4 KJ could be generated via processing 1 kg bamboo. Here, the results demonstrate that the MAHP is a promising high-efficiency pretreatment technology for bamboo due to the mild pretreatment severity and robust ethanol yield.

30 DIRECT ENERGY CONVERSION↗

Selenium inhibits the phytotoxicity of mercury in garlic (Allium sativum)

To investigate the influence of selenium on mercury phytotoxicity, the levels of selenium and mercury were analyzed with inductively coupled plasma-mass spectrometry (ICP-MS) in garlic tissues upon exposure to different dosages of inorganic mercury (Hg{sup 2+}) and selenite (SeO{sub 3}{sup 2−}) or selenate (SeO{sub 4}{sup 2−}). The distributions of selenium and mercury were examined with micro-synchrotron radiation X-ray fluorescence (μ-SRXRF), and the mercury speciation was investigated with micro-X-ray absorption near edge structure (μ-XANES). The results show that Se at higher exposure levels (>1 mg/L of SeO{sub 3}{sup 2−} or SeO{sub 4}{sup 2−}) would significantly inhibit the absorption and transportation of Hg when Hg{sup 2+} levels are higher than 1 mg/L in culture media. SeO{sub 3}{sup 2−} and SeO{sub 4}{sup 2−} were found to be equally effective in reducing Hg accumulation in garlic. The inhibition of Hg uptake by Se correlates well with the influence of Se on Hg phytotoxicity as indicated by the growth inhibition factor. Elemental imaging using μ-SRXRF also shows that Se could inhibit the accumulation and translocation of Hg in garlic. μ-XANES analysis shows that Hg is mainly present in the forms of Hg–S bonding as Hg(GSH){sub 2} and Hg(Met){sub 2}. Se exposure elicited decrease of Hg–S bonding in the form of Hg(GSH){sub 2}, together with Se-mediated alteration of Hg absorption, transportation and accumulation, may account for attenuated Hg phytotoxicity by Se in garlic. -- Highlights: ► Hg phytotoxicity can be mitigated by Se supplement in garlic growth. ► Se can inhibit the accumulation and transportation of Hg in garlic tissues. ► Localization and speciation of Hg in garlic can be modified by Se.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nanoadsorbents based on conducting polymer nanocomposites with main focus on polyaniline and its derivatives for removal of heavy metal ions/dyes: A review

Highlights: • Nanoadsorbents based on conductive polymers can remove heavy metal ions/dye. • Contact time, pH, adsorbent dosage and temperature are effective adsorption factors. • Chemical structures of nanoadsorbents play an important role in adsorption. • Adsorption of metal ions on PANI based nanocomposites is of physical type. Water contamination by toxic heavy metal ions and dyes remains a serious public health problem for humans, so attention on specific methods and technologies to remove heavy metal ions and dyes from wastewaters/aqueous solutions are desired. Numerous adsorbents have been reported for the removal of heavy metal ions/dyes from wastewaters/aqueous solutions. Polyaniline (PANI) and its derivatives, as conducting polymers, are good adsorbents to remove various kinds of heavy metal ions and dyes from wastewaters/aqueous solutions. The nanoadsorbents based on PANI and its derivatives have received much consideration, and are extensively reported in literature. This review focuses on the PANI and its derivatives based on nanoadsorbents for water purification. Various types of these nanoadsorbents used for the removal of heavy metal ions/dyes from wastewaters/aqueous solutions are also briefly compared in this review.

54 ENVIRONMENTAL SCIENCES↗

Photocatalytic inactivation of Vibrio fischeri using Fe2O3-TiO2-based nanoparticles

Highlights: • A marine bacterium (Vibrio fisheri) was examined as biofilm forming microorganism. • The inactivation of bacteria was performed in saline and nutrient growth media. • The performance of five TiO{sub 2} based photocatalysts was investigated. • Effective inactivation of bacteria was achieved by visible light driven photocatalysts. Biofouling is a major problem in water membrane processes, especially in seawater reverse osmosis plants. Inactivation of Vibrio fischeri (a well-known marine bacterium forming biofilm) through photocatalysis via visible light was investigated in this work using active Fe{sub 2}O{sub 3}-TiO{sub 2} nanoparticles. Five Fe{sub 2}O{sub 3}-TiO{sub 2} photocatalysts with different weight percentage of Fe{sub 2}O{sub 3} (0–5 wt%) were synthesized using an ultrasonic-assisted co-precipitation method. The photocatalysts were characterized by powder X-ray diffraction (XRD), BET surface area, transmission electron Æ (TEM) plus selected area electron diffraction (SAED) patterns, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and diffuse-reflectance spectroscopy (DRS). Based on the design of experiments, the synthesized photocatalysts were tested for inactivation of V. fischeri under visible light irradiation at different temperatures (25–35 °C) and different photocatalyst dosage (0.1–2 g/L). The photocatalytic microbial inactivation experiments were performed in artificial seawater appropriate for growth of the marine bacterium. The results revealed that the highest inactivation efficiency of V. fischeri was achieved when 1 g/L of 2.5 wt% Fe{sub 2}O{sub 3}-TiO{sub 2} were used, at 35 °C. Photocatalytic inactivation of microorganisms using visible light-driven Fe{sub 2}O{sub 3}-TiO{sub 2} photocatalysts, could introduce an innovative green method in pretreatment units of reverse osmosis plants to control the membrane biofouling.

54 ENVIRONMENTAL SCIENCES↗

Enhancing methane production of anaerobic digested sewage sludge by advanced wet oxidation & steam explosion pretreatment

Anaerobic digestion (AD) of sewage sludge is associated with lowered carbon conversion efficiency due to the recalcitrance of microbial cells in the Waste Activated Sludge (WAS) from the aeration basins with 50 % of the dry weight still being present after AD. The effect of Advanced Wet Oxidation & Steam Explosion (AWOEx) pretreatment on the methane yield at variable temperatures (165–200 °C), residence time (15–45 min) and oxygen dosage (1%–10% based on VS concentration) was tested in this study. Central composite design (JMP® Pro) was used to design 19 runs of AWOEx pretreatment of dewatered digested sewage sludge (DADSS) at different operating conditions. After pretreatment the DADSS was fed to 19 bioreactors operated in semi-continues mode at 37 °C. The highest average methane yields of 183 mL/g VS and 170 mL/g VS were found for the bioreactors receiving DADSS pretreated at 165 °C with a retention time of 15 min and 10 % O2 (Condition 1), and, 182.5 °C with a retention time of 15 min and 5.5 % O2 (Condition 2). This corresponds to an increase in the methane production of 156.2 % and 140.5 % compared to the methane production from the DADSS without pretreatment.

09 BIOMASS FUELS↗

Quality Assurance/Quality Control Issues for Intraoperative Planning and Adaptive Repeat Planning of Image-Guided Prostate Implants

The quality assurance/quality control purpose is this. We design a treatment plan, and we wish to be as certain as reasonably possible that the treatment is delivered as planned. In the case of conventionally planned prostate brachytherapy, implementing to the letter the implantation plan is rarely attainable and therefore can require adaptive replanning (a quality control issue). The reasons for this state of affairs include changes in the prostate shape and volume during implantation and treatment delivery (e.g., edema resolution) and unavoidable inaccuracy in the placement of the seeds in the prostate. As a result, quality-control activities (e.g., the need to monitor-ideally, on the fly-the target and urethral and rectal dosage) must be also addressed.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Phase I Study of Oxaliplatin in Combination With Capecitabine and Radiotherapy as Postoperative Treatment for Stage II and III Rectal Cancer

Purpose: A Phase I study was conducted to determine the maximal tolerated dose and the dose-limiting toxicity (DLT) of oxaliplatin (OXA) combined with capecitabine and radiotherapy as adjuvant treatment in patients with operable rectal cancer. Patients and Methods: A total of 21 patients with Stage II or III rectal adenocarcinoma after curative surgery were treated with radiotherapy to a total dose of 50 Gy in 5 weeks. OXA was administered at a dosage of 40 (n = 6), 50 (n = 3),60 (n = 3), 70 (n = 3), or 80 mg/m{sup 2} (n = 6) once a week for 2 weeks (first cycle) followed by a second cycle after a 7-day break. Capecitabine at a fixed dose of 1,300 mg/m{sup 2}/d was administered orally at the same schedule as for OXA. DLT was defined as Grade 3 or 4 hematologic and nonhematologic toxicity. Results: Grade 1-3 leukopenia, diarrhea, and nausea/vomiting were the most common toxic side effects, and most were Grade 1-2. A DLT was first observed in 1 of 3 patients at 40 mg/m{sup 2} (Grade 3 diarrhea) but was not observed in the next 3 patients at the same level or in patients who received a dose level of 50-70 mg/m{sup 2}. At 80 mg/m{sup 2}, DLT occurred in 3 of 6 patients (1 Grade 4 leukopenia and 2 Grade 3 diarrhea). Conclusions: OXA combined with a fixed dose of capecitabine at 625 mg/m{sup 2} twice daily by mouth plus radiotherapy in the adjuvant setting was tolerable and clinically feasible. The maximal tolerated dose of OXA in this setting was 80 mg/m{sup 2}, comparable to the maximal tolerated dose of OXA in the neoadjuvant setting.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Weekly Carboplatin Reduces Toxicity During Synchronous Chemoradiotherapy for Merkel Cell Carcinoma of Skin

Purpose: The toxicity of radiotherapy (RT) combined with weekly carboplatin and adjuvant carboplatin and etoposide was prospectively assessed in a group of patients with high-risk Stage I and II Merkel cell carcinoma of the skin. This regimen was compared with the Trans-Tasman Radiation Oncology Group 96:07 study, which used identical eligibility criteria but carboplatin and etoposide every 3 weeks during RT. Patients and Methods: Patients were eligible if they had disease localized to the primary site and lymph nodes, with high-risk features. RT was delivered to the primary site and lymph nodes to a dose of 50 Gy and weekly carboplatin (area under the curve of 2) was given during RT. This was followed by three cycles of carboplatin and etoposide. A total of 18 patients were entered into the study, and their data were compared with the data from 53 patients entered into the Trans-Tasman Radiation Oncology Group 96:07 study. Results: Involved lymph nodes (Stage II) were present in 14 patients (77%). Treatment was completed as planned in 16 patients. The weekly carboplatin dose was delivered in 17 patients, and 15 were able to complete all three cycles of adjuvant carboplatin and etoposide. Grade 3 and 4 neutrophil toxicity occurred in 7 patients, but no cases of febrile neutropenia developed. Compared with the Trans-Tasman Radiation Oncology Group 96:07 protocol (19 of 53 cases of febrile neutropenia), the reduction in the febrile neutropenia rate (p = 0.003) and decrease in Grade 3 skin toxicity (p = 0.006) were highly statistically significant. Conclusion: The results of our study have shown that weekly carboplatin at this dosage is a safe way to deliver synchronous chemotherapy during RT for MCC and results in a marked reduction of febrile neutropenia and Grade 3 skin toxicity compared with the three weekly regimen.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Effectiveness and Morbidity Associated With Reirradiation in Conservative Salvage Management of Recurrent Soft-Tissue Sarcoma

Purpose: The management of isolated local recurrence of soft-tissue sarcoma is therapeutically complex, and functional conservative management is preferable to radical or amputative salvage surgery. This study reviews University of Florida experience using conservative resection and reirradiation to manage isolated local recurrences of soft-tissue sarcoma. Methods and Materials: Between 1976 and 2005, a total of 14 patients who underwent primary conservative resection and irradiation developed isolated local recurrence and were managed with salvage conservative resection and reirradiation. Of the patients treated, 3 had tumors of the distal extremity, 8 had tumors of the proximal extremity, and 3 had tumors of the trunk. At the time of recurrence, 64% of tumors were greater than 5 cm and 79% were high grade. In combination with gross total resection, 13 of 14 patients received external beam radiotherapy with or without brachytherapy, and 1 patient was treated with brachytherapy alone. Two patients received chemotherapy. Results: The median follow-up was 30 months, and no living patients were lost during follow-up. From retreatment, the 5-year actuarial overall survival, cause-specific survival, and local control rates were 40%, 40%, and 18% respectively. There was a 50% incidence of serious complication requiring either reoperation or leading to permanent functional impairment. Of the 14 patients, only 1 has remained disease free and without significant complications. No treatment factors, including achieving wide surgical margins or delivering higher radiation dosages, seemed to confer an advantage in local control. Conclusions: Salvage therapy for management of locally recurrent soft-tissue sarcoma is challenging, and the effects of reoperation and reirradiation can be severe.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Bystander Effects Induced by Continuous Low-Dose-Rate {sup 125}I Seeds Potentiate the Killing Action of Irradiation on Human Lung Cancer Cells In Vitro

Purpose: To investigate bystander effects of low-dose-rate (LDR) {sup 125}I seed irradiation on human lung cancer cells in vitro. Methods and Materials: A549 and NCI-H446 cell lines of differing radiosensitivity were directly exposed to LDR {sup 125}I seeds irradiation for 2 or 4 Gy and then cocultured with nonirradiated cells for 24 hours. Induction of micronucleus (MN), {gamma}H2AX foci, and apoptosis were assayed. Results: After 2 and 4 Gy irradiation, micronucleus formation rate (MFR) and apoptotic rate of A549 and NCI-H446 cells were increased, and the MFR and apoptotic rate of NCI-H446 cells was 2.1-2.8 times higher than that of A549 cells. After coculturing nonirradiated bystander cells with {sup 125}I seed irradiated cells for 24 hours, MFR and the mean number of {gamma}H2AX foci/cells of bystander A549 and NCI-H446 cells were similar and significantly higher than those of control (p <0.05), although they did not increase with irradiation dose. However, the proportion of bystander NCI-H446 cells with MN numbers {>=}3 and {gamma}H2AX foci numbers 15-19 and 20-24 was higher than that of bystander A549 cells. In addition, dimethyl sulfoxide (DMSO) treatment could completely suppress the bystander MN of NCI-H446 cells, but it suppressed only partly the bystander MN of A549 cells, indicating that reactive oxygen species are involved in the bystander response to NCI-H446 cells, but other signaling factors may contribute to the bystander response of A549 cells. Conclusions: Continuous LDR irradiation of {sup 125}I seeds could induce bystander effects, which potentiate the killing action on tumor cells and compensate for the influence of nonuniform distribution of radiation dosage on therapeutic outcomes.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Adjuvant Therapy for Gallbladder Carcinoma: The Mayo Clinic Experience

Purpose: To analyze the effect of adjuvant chemoradiotherapy on gallbladder carcinoma. Methods and Materials: We retrospectively reviewed the records from consecutive patients who underwent R0 resection of gallbladder carcinoma between January 1, 1985, and December 31, 2004. Patients had either Stage I (T1-T2N0M0) or Stage II (T3N0M0 or T1-T3N1M0) disease. Patients undergoing adjuvant therapy received 5-fluorouracil chemotherapy concurrently with radiotherapy (median dosage, 50.4 Gy in 28 fractions). Adverse prognostic factors and the effect of adjuvant treatment on overall survival (OS) were evaluated. Results: A total of 73 patients were included in the analysis; of these, 25 received adjuvant chemoradiotherapy. On univariate analysis, no adverse prognostic factors for OS reached statistical significance, but trends were noted for Stage N1 vs. N0 (p = .06), Nx vs. N0 (p = .09), Stage T3 vs. T1-T2 (p = .06), and histologic findings other than adenocarcinoma (p = .13). The median OS for patients receiving adjuvant chemoradiotherapy vs. surgery alone was 4.8 years and 4.2 years, respectively (log-rank test, p = .56). However, a significantly greater percentage of patients receiving adjuvant chemoradiotherapy had Stage II disease (p <.001). In the multivariate Cox model, increasing T and N category and histologic findings other than adenocarcinoma were significant predictors of decreased OS. Additionally, adjuvant chemoradiotherapy was a significant predictor of improved OS after adjusting for these prognostic factors (hazard ratio for death, 0.3; 95% confidence interval, 0.13-0.69; p = .004). Conclusion: After adjusting for the stage parameters and histologic findings, our data suggest that adjuvant chemoradiotherapy might improve OS for patients with gallbladder cancer.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Dose Escalation of Whole-Brain Radiotherapy for Brain Metastases From Melanoma

Purpose: The majority of patients with brain metastases from melanoma receive whole-brain radiotherapy (WBRT). However, the results are poor. Hypofractionation regimens failed to improve the outcome of these patients. This study investigates a potential benefit from escalation of the WBRT dose beyond the 'standard' regimen 30 Gy in 10 fractions (10x3 Gy). Methods and Materials: Data from 51 melanoma patients receiving WBRT alone were retrospectively analyzed. A dosage of 10x3 Gy (n = 33) was compared with higher doses including 40 Gy/20 fractions (n = 11) and 45 Gy/15 fractions (n = 7) for survival (OS) and local (intracerebral) control (LC). Additional potential prognostic factors were evaluated: age, gender, performance status, number of metastases, extracerebral metastases, and recursive partitioning analysis (RPA) class. Results: At 6 months, OS rates were 27% after 10x3 Gy and 50% after higher doses (p = 0.009). The OS rates at 12 months were 4% and 20%. On multivariate analysis, higher WBRT doses (p = 0.010), fewer than four brain metastases (p = 0.012), no extracerebral metastases (p = 0.006), and RPA class 1 (p = 0.005) were associated with improved OS. The LC rates at 6 months were 23% after 10x3 Gy and 50% after higher doses (p = 0.021). The LC rates at 12 months were 0% and 13%. On multivariate analysis, higher WBRT doses (p = 0.020) and fewer than brain metastases (p = 0.002) were associated with better LC. Conclusions: Given the limitations of a retrospective study, the findings suggest that patients with brain metastases from melanoma receiving WBRT alone may benefit from dose escalation beyond 10x3 Gy. The hypothesis generated by this study must be confirmed in a randomized trial stratifying for significant prognostic factors.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Oxaliplatin Plus Dual Inhibition of Thymidilate Synthase During Preoperative Pelvic Radiotherapy for Locally Advanced Rectal Carcinoma: Long-Term Outcome

Purpose: To assess the safety and efficacy of oxaliplatin (OXA) plus dual inhibition of thymidilate synthase during preoperative pelvic radiotherapy (RT) in patients with poor prognosis for rectal carcinoma. Methods and Materials: Sixty-three patients with the following characteristics, a clinical (c) stage T4, cN1-2, or cT3N0 of {<=}5 cm from the anal verge and/or with a circumferential resection margin (CRM) of {<=}5 mm (by magnetic resonance imaging), received three biweekly courses of chemotherapy with OXA, 100 mg/m{sup 2}; raltitrexed (RTX), 2.5 mg/m{sup 2} on day 1, and 5-fluorouracil (5-FU), 900 mg/m{sup 2} (31 patients) or 800 mg/m{sup 2} (32 patients); levo-folinic acid (LFA), 250 mg/m{sup 2} on day 2, during pelvic RT (45 Gy). Pathologic response was defined as complete pathological response (ypCR), major (tumor regression grade(TRG) 2 to 3, with ypCRM-ve and ypN-ve) or minor or no response (TRG4 to -5, or ypCRM+ve, or ypN+ve). Adjuvant 5-FU/LFA regimen was given in cases of cT4, ypN+ve, or ypCRM+ve. Results: Overall, neutropenia (40%) and diarrhea (13%) were the most common grade {>=}3 toxicities, and tolerability was better with a 5-FU dose reduction. No significant difference in pathologic response was seen according 5-FU dosage: overall, a ypCR was obtained in 24 (39%) patients, and a major response in 20 (32%) patients. The 5-year probability of freedom from recurrence was 80% (95% confidence interval, 68%-92%); it was 56% for the minor/no response group, while it was around 90% for both the ypCR and the major response group. Conclusions: OXA, RTX, and 5-FU/LFA administered during pelvic RT produced promising early and long-term results in rectal carcinoma patients with poor prognosis. The postoperative treatment strategy applied in our study supports the risk-adapted approach in postoperative management.

62 RADIOLOGY AND NUCLEAR MEDICINE↗