Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DILUTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Effective field theory for dilute Fermi systems at fourth order

We discuss high-order calculations in perturbative effective field theory for fermions at low energy scales. The Fermi-momentum or k F a s as expansion for the ground-state energy of the dilute Fermi gas is calculated to fourth order, both in cutoff regularization and in dimensional regularization. For the case of spin one-half fermions we find from a Bayesian analysis that the expansion is well converged at this order for |k F a s |≲ 0.5. Furthermore, we show that Padé-Borel resummations can improve the convergence for |k F a s |≲ 1. Here, our results provide important constraints for nonperturbative calculations of ultracold atoms and dilute neutron matter.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Magnetic dilution in the triangular lattice antiferromagnet NaYb 1−𝑥 ⁢Lu 𝑥 ⁢O 2

The delafossitelike compound NaYbO 2 hosts a triangular lattice of Yb 3+ moments and is a promising candidate for the realization of a quantum spin liquid ground state—an exotic, quantum-disordered magnetic phase featuring long-range entanglement of spins. Tuning this system away from this quantum-disordered regime toward classical order or spin freezing is a powerful approach to shed light on the nature of the parent ground state. Here we leverage the substitution of nonmagnetic Lu 3+ onto the Yb 3+ sites to study the effects of magnetic disorder in NaYbO 2 using low-temperature ac susceptibility, heat capacity, and muon spin relaxation (𝜇⁢SR) measurements. Here, our 𝜇⁢SR measurements reveal resilient, correlated magnetic fluctuations that persist to at least 15% dilution, precluding conventional spin freezing and magnetic inhomogeneity. Heat capacity and magnetic susceptibility resolve a rapid suppression of the field-induced “up-up-down” magnetic order upon dilution and a crossover in the power-law behavior of the low-temperature magnetic excitations associated with the zero-field quantum disordered ground state. Taken together, these results support the notion of a robust network of entangled moments in NaYbO 2 and provide experimental validation of several models of a Heisenberg triangular lattice antiferromagnet in the presence of disorder.

Muon spin relaxation & rotation↗

XANES and EXAFS of dilute solutions of transition metals at XFELs

This work has demonstrated that X-ray absorption spectroscopy (XAS), both Mn XANES and EXAFS, of solutions with millimolar concentrations of metal is possible using the femtosecond X-ray pulses from XFELs. Mn XAS data were collected using two different sample delivery methods, a Rayleigh jet and a drop-on-demand setup, with varying concentrations of Mn. Here, a new method for normalization of XAS spectra based on solvent scattering that is compatible with data collection from a highly variable pulsed source is described. The measured XANES and EXAFS spectra of such dilute solution samples are in good agreement with data collected at synchrotron sources using traditional scanning protocols. The procedures described here will enable XFEL-based XAS on dilute biological samples, especially metalloproteins, with low sample consumption. Details of the experimental setup and data analysis methods used in this XANES and EXAFS study are presented. This method will also benefit XAS performed at high-repetition-rate XFELs such as the European XFEL, LCLS-II and LCLS-II-HE.

Chatterjee, Ruchira (ORCID:000000020865061X)↗

High-Performance Computing and Analysis-Led Development of High Efficiency Dilute Opposed Piston Gasoline Engine

Pinnacle is developing a multicylinder 1.2 L gasoline engine for automotive applications using high-performance computing (HPC) and analysis methods. Pinnacle and Oak Ridge National Laboratory executed large-scale multidimensional combustion analyses at the Oak Ridge Leadership Computing Facility to thoroughly explore the design space. These HPC-led investigations show high fuel efficiency (~46% gross indicated efficiency) may be achieved by operating with extremely high charge dilution levels of exhaust gas recirculation (EGR) at a light load key drive cycle condition (2000 RPM, 3 bar brake mean effective pressure (BMEP)), while simultaneously attaining high levels of fuel conversion efficiency and low NO x emissions. In this extremely dilute environment, the flame propagation event is supported by turbulence and bulk in-cylinder charge motion brought about by modulation of inlet port flow. This arrangement produces a load and speed adjustable amalgamation of swirl and counter-rotating tumble which provides the turbulence required to support stable low-temperature combustion. At higher load conditions, the engine may operate at more traditional combustion modes to generate competitive power. In this work, the numerical results from these HPC simulations are presented. Finally, further HPC simulations and test validations are underway and will be reported in future publications.

42 ENGINEERING↗

Effects of High Fuel Loading and CO2 Dilution on Oxy-Methane Ignition Inside a Shock Tube at High Pressure

Abstract Ignition delay times were measured for methane/O2 mixtures in a high dilution environment of either CO2 or N2 using a shock tube facility. Experiments were performed between 1044 K and 1356 K at pressures near 16 ± 2 atm. Test mixtures had an equivalence ratio of 1.0 with 16.67% CH4, 33.33% O2, and 50% diluent. Ignition delay times were measured using OH* emission and pressure time-histories. Data were compared to the predictions of two literature kinetic mechanisms (ARAMCO MECH 2.0 and GRI Mech 3.0). Most experiments showed inhomogeneous (mild) ignition which was deduced from five time-of-arrival pressure transducers placed along the driven section of the shock tube. Further analysis included determination of blast wave velocities and locations away from the end wall of initial detonations. Blast velocities were 60–80% of CJ-Detonation calculations. A narrow high temperature region within the range was identified as showing homogenous (strong) ignition which showed generally good agreement with model predictions. Model comparisons with mild ignition cases should not be used to further refine kinetic mechanisms, though at these conditions, insight was gained into various ignition behavior. To the best of our knowledge, we present first shock tube data during ignition of high fuel loading CH4/O2 mixtures diluted with CO2 and N2.

Energy & Fuels↗

CHARACTERISTICS OF CYCLE-TO-CYCLE COMBUSTION VARIABILITY AT PARTIAL-BURN LIMITED AND MISFIRE LIMITED SPARK TIMING UNDER HIGHLY DILUTED CONDITIONS

Diluted combustion with exhaust gas recirculation (EGR) has been widely employed to improve the fuel economy of spark ignition engines. The combustion kinetics, however, are affected and the flame propagation speed is decreased. In order to compensate for this adverse effect, the spark timing needs to be recalibrated to achieve maximum brake torque (MBT). At high levels of EGR dilution, the spark timing is constrained by two ignition limits: 1) the partial-bum limit where the spark timing is retarded from MBT and 2) the misfire limit where the spark timing is too advanced. This work uses a probabilistic framework to capture the differences between both ignition limits. In particular, it introduces the concept of a nominal indicated mean effective pressure (IMEP) distribution based on the stochastic properties of the cycle-to-cycle variability (CCV) at nominal stable conditions. By defining a nominal band where fully burned cycles occur with high probability, we introduce a cycle classification method that can be used to 1) determine the level of randomness of misfire and partial-burn events, and 2) measure CCV. The new CCV metric based on the density of the nominal band is compared with the traditional coefficient of variation of IMEP (CoVIMEP). It is shown that the nominal band concept, together with the CoVIMEP, can help to discern between partial-burn limited and misfire limited conditions. Furthermore, the Kullback-Leibler divergence is used to demonstrate that the IMEP distribution is significantly different between nominal and partial-burn/misfire limited conditions. Experiments are carried at various EGR levels and spark timings while recoding in-cylinder pressure at steady state. Although the emphasis of this work is to characterize the differences of both ignition limits from a probabilistic point of view, similarities between partial-burn cycles at either limiting conditions are also discussed.

Maldonado, Bryan↗

Imaging mesoscopic antiferromagnetic spin textures in the dilute limit from single-geometry resonant coherent x-ray diffraction

The detection and manipulation of antiferromagnetic domains and topological antiferromagnetic textures are of central interest to solid-state physics. A fundamental step is identifying tools to probe the mesoscopic texture of an antiferromagnetic order parameter. In this work, we demonstrate that Bragg coherent diffractive imaging can be extended to study the mesoscopic texture of an antiferromagnetic order parameter using resonant magnetic x-ray scattering. We study the onset of the antiferromagnet transition in PrNiO 3 , focusing on a temperature regime in which the antiferromagnetic domains are dilute in the beam spot and the coherent diffraction pattern modulating the antiferromagnetic peak is greatly simplified. We demonstrate that it is possible to extract the arrangements and sizes of these domains from single diffraction patterns and show that the approach could be extended to a time-structured light source to study the motion of dilute domains or the motion of topological defects in an antiferromagnetic spin texture.

36 MATERIALS SCIENCE↗

Concentration dependence of the wings of a dipole-broadened magnetic resonance line in magnetically diluted lattices

The singularities of the time autocorrelation functions (ACFs) of magnetically diluted spin systems with dipole–dipole interaction (DDI), which determine the high-frequency asymptotics of autocorrelation functions and the wings of a magnetic resonance line, are studied. Using the self-consistent fluctuating local field approximation, nonlinear equations are derived for autocorrelation functions averaged over the independent random arrangement of spins (magnetic atoms) in a diamagnetic lattice with different spin concentrations. The equations take into account the specificity of the dipole–dipole interaction. First, due to its axial symmetry in a strong static magnetic field, the autocorrelation functions of longitudinal and transverse spin components are described by different equations. Second, the long-range type of the dipole–dipole interaction is taken into account by separating contributions into the local field from distant and near spins. The recurrent equations are obtained for the expansion coefficients of autocorrelation functions in power series in time. From them, the numerical value of the coordinate of the nearest singularity of the autocorrelation function is found on the imaginary time axis, which is equal to the radius of convergence of these expansions. It is shown that in the strong dilution case, the logarithmic concentration dependence of the coordinate of the singularity is observed, which is caused by the presence of a cluster of near spins whose fraction is small but contribution to the modulation frequency is large. As an example a silicon crystal with different {sup 29}Si concentrations in magnetic fields directed along three crystallographic axes is considered.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reinforcement learning applied to dilute combustion control for increased fuel efficiency

To reduce the modeling burden for control of spark-ignition engines, reinforcement learning (RL) has been applied to solve the dilute combustion limit problem. Q-learning was used to identify an optimal control policy to adjust the fuel injection quantity in each combustion cycle. A physics-based model was used to determine the relevant states of the system used for training the control policy in a data-efficient manner. The cost function was chosen such that high cycle-to-cycle variability (CCV) at the dilute limit was minimized while maintaining stoichiometric combustion as much as possible. Experimental results demonstrated a reduction of CCV after the training period with slightly lean combustion, contributing to a net increase in fuel conversion efficiency of 1.33%. To ensure stoichiometric combustion for three-way catalyst compatibility, a second feedback loop based on an exhaust oxygen sensor was incorporated into the fuel quantity controller using a slow proportional-integral (PI) controller. The closed-loop experiments showed that both feedback loops can cooperate effectively, maintaining stoichiometric combustion while reducing combustion CCV and increasing fuel conversion efficiency by 1.09%. Finally, a modified cost function was proposed to ensure stoichiometric combustion with a single controller. In addition, the learning period was shortened by half to evaluate the RL algorithm performance on limited training time. Experimental results showed that the modified cost function could achieve the desired CCV targets, however, the learning time was reduced by half and the fuel conversion efficiency increased only by 0.30%.

33 ADVANCED PROPULSION SYSTEMS↗

Design of a Dry Dilution Refrigerator for MMC Gamma Detector Arrays

The goal of this LCP is to develop an ultra-high resolution gamma detector based on magnetic microcalorimeters (MMCs) for accurate non-destructive analysis (NDA) of nuclear materials. For highest energy resolution, we will introduce erbium-doped silver (Ag:Er) as a novel sensor material to replace current Au:Er sensors. The detector sensitivity will be increased by developing arrays of 32 Ag:Er pixels read out by 16 SQUID preamplifiers. MMC detectors require operating temperatures of ~15 mK and thus the use of a dilution refrigerator, and the desire for user-friendly operation without cryogenic liquids requires that this refrigerator use pulse-tube pre-cooling to ~4 K. For long-term reliability, we intend to re-design the heat switch that is needed to apply the magnetizing current to the Ag:Er sensor and that used to fail in earlier designs after months of operation. A cryogenic Compton veto will be installed to reduce the spectral background of the MMC, especially at low energies where ultra-high energy resolution is most important. The goals for FY16 were 1) to purchase a liquid-cryogen-free dilution refrigerator and adapt it for MMC operation, and 2) to fabricate Ag:Er-based MMC γ-detectors with improved performance and optimize their response. This report discusses the design of the instruments, and progress in MMC detector fabrication. Details of the MMC fabrication have been discussed in an April 2016 report to DOE.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

IONEX Mass and Energy Balance for LAW TCO Unit and Ammonia/Air Dilution Skid

The objective of this calculation is to perform a mass and energy balance analysis of the LAW TCO unit, and Ammonia/Air Dilution piping systems. The analysis will verify as well as establish several design conditions. Offgas temperatures will be calculated to establish a system design temperature. Flow rates and pressures are calculated throughout to help with sizing equipment. Offgas composition and properties are established at each node along the system. The nodes are identified in the P&ID. Flow rates from the ammonia dilution skid are also calculated to determine the ammonia injection required for the performance of the SCR.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Implementation of a Web Interface to Display Real-Time Statistics of a Dilution Refrigerator

The purpose of the project is to communicate with a Bluefors control unit and extract data. The Bluefors control unit is a piece of experimental equipment that measures various different data points in a dilution refrigerator and stores them. The goal was to access the control unit using the websockets library in Python. After accessing the control unit, the goal was to export the data to a web page in HTML/CSS. The tools that were used changed throughout the project. Python was used to communicate with the Bluefors unit via JSON requests and JSON objects, then the Python hosted its own websocket server to act as a proxy server to allow for the web page to access the data. This was done to bypass SSL verification. Then, the web page, which was created using JavaScript, React, Next.js, and NodeJS, accesses the proxy server to import the data from the dilution refrigerator and display the values in real time on the page.

Rasheed, Hammad↗

Dilute Paramagnetism and Non-Trivial Topology in Quasicrystal Approximant Fe4Al13

A very fundamental property of both weakly and strongly interacting materials is the nature of their magnetic response. In this work, we detail the growth of crystals of the quasicrystal approximant Fe4Al13 with an Al flux solvent method. We characterize our samples using electrical transport and heat capacity, yielding results consistent with a simple non-magnetic metal. However, magnetization measurements portray an extremely unusual response for a dilute paramagnet and do not exhibit the characteristic Curie behavior expected for a weakly interacting material at high temperature. Electronic structure calculations confirm metallic behavior but also indicate that each isolated band near the Fermi energy hosts non-trivial topologies, including strong, weak, and nodal components, with resultant topological surface states distinguishable from bulk states on the (001) surface. With half-filled flat bands apparent in the calculation, but an absence of long-range magnetic order, the unusual quasi-paramagnetic response suggests the dilute paramagnetic behavior in this quasicrystal approximant is surprising and may serve as a test of the fundamental assumptions that are taken for granted for the magnetic response of weakly interacting systems.

Avers, Keenan E. (ORCID:0000000223441939)↗

Contrasting Foraging Patterns: Testing Resource-Concentration and Dilution Effects with Pollinators and Seed Predators

Resource concentration effects occur when high resource density patches attract and support more foragers than low density patches. In contrast, resource dilution effects can occur if high density patches support fewer consumers. In this study, we examined the foraging rates of pollinators and seed predators on two perennial plant species (Rudbeckia triloba and Verbena stricta) as functions of resource density. Specifically, we examined whether resource-dense patches (densities of flower and seeds on individual plants) resulted in greater visitation and seed removal rates, respectively. We also examined whether foraging rates were context-dependent by conducting the study in two sites that varied in resource densities. For pollinators, we found negative relationships between the density of flowers per plant and visitation rates, suggesting dilution effects. For seed predators, we found positive relationships consistent with concentration effects. Saturation effects and differences in foraging behaviors might explain the opposite relationships; most of the seed predators were ants (recruitment-based foragers), and pollinators were mostly solitary foragers. We also found that foraging rates were site-dependent, possibly due to site-level differences in resource abundance and consumer densities. These results suggest that these two plant species may benefit from producing as many flowers as possible, given high levels of pollination and low seed predation.

54 ENVIRONMENTAL SCIENCES↗

Lipids accumulation in nitrogen and phosphorus-limited yeast is caused by less growth-related dilution

Oleaginous yeasts are used commercially to produce oleochemicals and hold potential also for biodiesel production. In response to nitrogen or phosphorous limitation, oleaginous yeast accumulate triacylglycerol. Previous work has investigated potential mechanisms by which nutrient limitation induces lipid biosynthesis without verifying whether lipid biosynthesis flux is actually enhanced. Here we show, using 13C-glucose tracing, that in nitrogen or phosphorous limitation, lipid accumulation occurs without consistent increases in biosynthetic flux. Instead, the main driver of increased lipid pools is decreased growth-related dilution. This conclusion holds across two divergent oleaginous yeasts: Rhodotorula toruloides and Yarrowia lipolytica. Quantitative proteomics shows a substantial proteome reallocation in response to nitrogen and phosphorous limitation, with ribosomal proteins strongly down regulated, while lipid biosynthetic enzymes are preserved but not consistently upregulated in absolute quantity. Thus, nutrient limitation, rather than triggering greatly enhanced lipid synthesis, results in roughly sustained lipid enzyme levels and biosynthetic flux. Due to slower lipid dilution by cell division, this suffices to drive marked lipid accumulation.

Keber, Felix [Lewis Sigler Institute for Integrati↗

Detection of dilute organic acids in water by inelastic tunneling spectroscopy

Study of inelastic electron tunneling spectroscopy (IETS) spectra obtained from junctions exposed to dilute solutions of organic molecules in both liquid and vapor phases. The results indicate that it is possible in principle to detect the presence and to measure the concentration of at least some organic molecules in dilute aqueous solution by means of the IETS technique. Some fine points pertaining to the application of this technique are discussed, and it is pointed out that through appropriate refinements IETS may become a valuable tool for analytical water chemistry.

Skarlatos, Y.↗

Evaluation of two gas-dilution methods for instrument calibration

Two gas dilution methods were evaluated for use in the calibration of analytical instruments used in air pollution studies. A dual isotope fluorescence carbon monoxide analyzer was used as the transfer standard. The methods are not new but some modifications are described. The rotary injection gas dilution method was found to be more accurate than the closed loop method. Results by the two methods differed by 5 percent. This could not be accounted for by the random errors in the measurements. The methods avoid the problems associated with pressurized cylinders. Both methods have merit and have found a place in instrument calibration work.

Evans, A., Jr.↗

Dilution Jet Behavior in the Turn Section of a Reverse Flow Combuster

Measurements of the temperature field produced by a single jet and a row of dilution jets issued into a reverse flow combustor are presented. The temperature measurements are presented in the form of consecutive normalized temperature profiles, and jet trajectories. Single jet trajectories were swept toward the inner wall of the turn, whether injection was from the inner or outer wall. This behavior is explained by the radially inward velocity component necessary to support irrotational flow through the turn. Comparison between experimental results and model calculations showed poor agreement due to the model's not including the radial velocity component. A widely spaced row of jets produced trajectories similar to single jets at similar test conditions, but as spacing ratio was reduced, penetration was reduced to the point where the dilution jet flow attached to the wall.

Riddlebaugh, S. M.↗