SEARCH · Engineering Papers

Results for “Cost reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Spacecraft factory-to-pad testing concept

It is noted that the concept of factory-to-pad testing is based on the shipment of a flight-ready spacecraft to the launch base and can be achieved by thorough and comprehensive factory testing of the spacecraft. The principal objectives and results of this approach are shown to be significant cost reductions, increased test effectiveness, and fewer flight problems. Key elements for this concept's success are discussed, including factory-to-pad commonality of support equipment, test requirements and procedures, test teams, and computer programs. Applications of this approach in the space-shuttle era are considered, and a preliminary factory-to-pad concept for the Large Space Telescope spacecraft is presented.

Jones, R. H.↗

NASA NTRS1975

Recent developments in multiplane-multispeed balancing of flexible rotors in the United States

This paper describes current developments in the evolution of a computer-implemented balancing procedure which permits flexible rotors to be precisely balanced in a cost-effective manner. Corrections in virtually any reasonable number of planes, computed by the procedure using signals from vibration sensors at critical locations, permit rotor operation over any design speed range. Steady-state operation at undamped critical speeds has been demonstrated. Results of recent test efforts indicate that the procedure can be applied with equal effectiveness to rotors of any size. Manufacturing and overhaul cost reductions are expected to flow from its adoption, together with performance advantages from operation in hitherto restricted dynamic regimes.-

Badgley, R. H.↗

NASA NTRS1976

General aviation design synthesis utilizing interactive computer graphics

Interactive computer graphics is a fast growing area of computer application, due to such factors as substantial cost reductions in hardware, general availability of software, and expanded data communication networks. In addition to allowing faster and more meaningful input/output, computer graphics permits the use of data in graphic form to carry out parametric studies for configuration selection and for assessing the impact of advanced technologies on general aviation designs. The incorporation of interactive computer graphics into a NASA developed general aviation synthesis program is described, and the potential uses of the synthesis program in preliminary design are demonstrated.

Galloway, T. L.↗

NASA NTRS1976

HEAO attitude control subsystem - A multimode/multimission design

The initial three satellites in the High Energy Astronomy Observatory (HEAO) series are in the final development stages with the first launch to be in April 1977. The overall program design concept stressed cost reduction through use of hardware standardization for the three configurations and missions. The Attitude Control and Determination Subsystem (ACDS) developed for HEAO was able to achieve significant design commonality in both hardware and software in an implementation which satisfied the performance requirements of the different missions. The ACDS thus provides an example of a multimode/multimission design which should soon be operational.

Hoffman, D. P.↗

NASA NTRS1976

TCV software test and validation tools and technique

The paper describes techniques for testing and validating software for the TCV (Terminal Configured Vehicle) program which is intended to solve problems associated with operating a commercial transport aircraft in the terminal area. The TCV research test bed is a Boeing 737 specially configured with digital computer systems to carry out automatic navigation, guidance, flight controls, and electronic displays research. The techniques developed for time and cost reduction include automatic documentation aids, an automatic software configuration, and an all software generation and validation system.

Straeter, T. A.↗

NASA NTRS1977

Classification accuracy improvement

Improvements made in processing system designed for MIDAS (prototype multivariate interactive digital analysis system) effects higher accuracy in classification of pixels, resulting in significantly-reduced processing time. Improved system realizes cost reduction factor of 20 or more.

Kistler, R.↗

NASA NTRS1976

Status of silicon solar cell technology

Major progress in solar cell technology leading to increased efficiency has occurred since 1970. Technical approaches leading to this increased output include surface texturing, improved antireflection coatings, reduced grid pattern area coverage, shallow junctions and back surface fields. The status of these developments and their incorporation into cell production is discussed. Future research and technology trends leading to further efficiency increases and substantial cost reductions are described.

Brandhorst, H. W., Jr.↗

NASA NTRS1975

NASA Office of Aeronautics and Space Technology Summer Workshop. Volume 5: Propulsion technology panel, part 1

Payload experiments which could be carried out in near earth space using the shuttle orbiter, its payload bay, the Spacelab, and/or some free-flying device that might be used for long duration testing were identified. Specific areas examined in terms of user requirements include: chemical propulsion, nuclear propulsion (fission, fussion, radioisotopes), and collected energy (coherent energy and solar electromagnetic energy). Cost reduction objectives for advanced propulsion technology development were also developed.

Source record↗

NASA NTRS1977

Ceramic applications in the advanced Stirling automotive engine

The ideal cycle, its application to a practical machine, and the specific advantages of high efficiency, low emissions, multi-fuel capability, and low noise of the stirling engine are discussed. Certain portions of the Stirling engine must operate continuously at high temperature. Ceramics offer the potential of cost reduction and efficiency improvement for advanced engine applications. Potential applications for ceramics in Stirling engines, and some of the special problems pertinent to using ceramics in the Stirling engine are described. The research and technology program in ceramics which is planned to support the development of advanced Stirling engines is outlined.

Tomazic, W. A.↗

NASA NTRS1976

NASA's present and future sensor technology developments

NASA's overall sensing, data acquisition, and instrumentation programs are reviewed. The review shows that the trends in advanced sensor technology involve increased use of solid-state sensors, multiapplication sensors, standardized instrumentation, and miniaturized detectors. Examples are given of several new technologies, showing how improvements in sensor operational capability (such as enhanced sensitivity and spectral range) derived from these advances have resulted in relaxed spacecraft stability requirements, mission time savings, and savings in weight, size, and power. The introduction of multiapplication sensors and standardized instrumentation will result in measurement cost reduction and improved compatibility with standardized spacecraft.

Rubin, B.↗

NASA NTRS1976

Transportation options for solar power satellites

Advantages of solar power satellites compared to ground-based solar power installations are related to an almost continuous exposure to sunlight and to a much smaller collector area. An investigation of the transportation cost problem is conducted. Transportation systems based on presently understood technology are considered for the deployment of solar power satellites at potentially competitive costs. It is found that the cost of placement in a geosynchronous orbit is reducible to the range from $500 to $1000/kW. Approaches for achieving dramatic cost reductions are discussed.

Woodcock, G. R.↗

NASA NTRS1976

Fixed flat plate collector with a reversible vee-trough concentrator

An asymmetrical-reversible vee-trough concentrator for use both with nonevacuated and evacuated receivers is proposed in order to improve the performance of a fixed flat plate collector. The device is capable of maintaining a year-round concentration factor of about 2 while eliminating the complications of the tilt adjustments of the collector box assembly. Efficiency improvements and cost reductions for temperatures of about 100 and 200 C are offered for the nonvacuum and vacuum tube versions, respectively. A major advantage of the vee-trough is the enhancement of the incident flux, thus extending the collection period. The vacuum collector is suitable for supplying heat to solar Rankine systems, while the nonvacuum version can be used for air conditioning purposes via an absorption air conditioner.

Selcuk, M. K.↗

NASA NTRS1976

Large area Czochralski silicon for solar cells

A detailed model of a typical Czochralski silicon crystal puller is utilized to predict maximum crystal growth rate as a function of various furnace parameters. Results of this analysis, when combined with multiblade slurry sawing, indicate that the Czochralski process is highly attractive for achieving near-term cost reduction of solar cell silicon.

Rea, S. N.↗

NASA NTRS1977

Organizing for low cost space transportation

The paper describes the management concepts and organizational structure NASA is establishing to operate the Space Transportation System. Policies which would encourage public and commercial organizations and private individuals to use the new STS are discussed, and design criteria for experiments, spacecraft, and other systems elements are considered. The design criteria are intented to facilitate cost reductions for space operations. NASA plans for the transition from currently used expendable launch vehicles to Shuttle use and Shuttle pricing policies are explained in detail. Hardware development is basically complete, management functions have been defined, pricing policies have been published, and procedures for user contact and services have been places into operation.

Lee, C. M.↗

NASA NTRS1979

High-gradient continuous-casting furnace

High gradient allows rapid growth rates in directionally-solidified eutectic alloys. Furnace design permits cost reductions in directional solidification process through its increased solidification rates, which reduces melt/mold interaction. It produces structural engineering materials for any application requiring properties directionally-solidified eutectic materials.

Scheuermann, C. M.↗

NASA NTRS1977

Estimation of ground temperature from GFCR radiometric signal

A procedure was developed which demonstrates the feasibility of estimating actual surface temperature from the effective brightness temperature which can be conveniently measured by a radiometer from remote sensing platforms. Atmospheric corrections to the effective brightness temperature are computed corresponding to the 'base model' atmosphere and several modifications of this caused by deviations of the various atmospheric or surface parameters from their base model values. Simple analytical relations were established between the deviations of these parameters and the additional temperature corrections required to compensate for them. Effects of simultaneous variation of several parameters also were examined. Use of these analytical relations, instead of radiative transfer calculations, results in tremendous savings in data reduction costs.

Gupia, S. K.↗

NASA NTRS1978

Study of low-cost fabrication methods for aerospace composite materials

Flat and hat section specimens of graphite/epoxy composite materials have been fabricated by the resin bath or wet pultrusion process. This demonstrated the feasibility of incorporating crossplied graphite fiber reinforcements in conjunction with epoxy resin systems in the wet pultrusion process. However, the thickness constraints of the pultrusion process, the lack of dimensional stability of the crossply materials and equipment limitations affect the quality of the hat section pultrusions. The wet pultrusion process shows promise of being a low cost method for producing composite parts with constant cross section along the length. A cost analysis showed at least 80 percent cost reduction for the hat section and 40 percent for flat panel by pultrusion over the conventional manual and automated lay-up.

Chung, H. H.↗

NASA NTRS1978

Research of low cost wind generator rotors

A feasibility program determined that it would be possible to significantly reduce the cost of manufacturing wind generator rotors by making them of cast urethane. Several high modulus urethanes which were structurally tested were developed. A section of rotor was also cast and tested showing the excellent aerodynamic surface which results. A design analysis indicated that a cost reduction of almost ten to one can be achieved with a small weight increase to achieve the same structural integrity as expected of current rotor systems.

Fertis, D. G.↗