Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Continuous symmetries”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The Venus ultraviolet aurora - Observations at 130.4 nm

Continuous and highly variable emissions at 130.4 nm are observed on the night-side of Venus by the Pioneer Venus Orbiter ultraviolet spectrometer. The emissions have a typical intensity of 10-20 R, occasionally exceed 100 R, and have a dawn-dusk symmetry in brightness during periods of unusual intensity. Possible energy source for this 'aurora' is the precipitation of suprathermal electrons. Field and particle observations suggest an additional source for the brightest emissions which is associated with solar flares and/or interplanetary shocks.

Phillips, J. L.↗
NASA NTRS1989

Application of two-component phase Doppler interferometry to the measurement of particle size, mass flux, and velocities in two-phase flows

Two-component phase Doppler interferometry is described, along with its application for the spatially-resolved measurements of particle size, velocity, and mass flux as well as continuous phase velocity. This technique measures single particle events at a point in the flow; droplet size is deduced from the spatial phase shift of the Doppler signal. Particle size influence and discrimination of continuous and discrete phases are among issues covered. Applications are presented for four cases: an example of the discrimination of two sizes of glass beads in a jet flow; a demonstration of the discrimination of phases in a spray field; an assessment of atomizer symmetry with respect to fuel distribution; and a characterization of a droplet field in a reacting spray. It is noted that the above technique is especially powerful in delineating droplet interactions in the swirling, complex flows typical of realistic systems.

Mcdonell, V. G.↗
DOE OSTI2021

Geometry of the charge density wave in the kagome metal A V 3 Sb 5

Kagome lattice is a fertile platform for topological and intertwined electronic excitations. Recently, experimental evidence of an unconventional charge density wave (CDW) is observed in a Z 2 kagome metal AV 3 Sb 5 (A=K, Cs, Rb). This observation triggers wide interest in the interplay between frustrated crystal structure and Fermi surface instabilities. Here, we analyze the lattice effect and its impact on CDW in AV 3 Sb 5 . Based on published experimental data, we show that the 2×2×2 CDW breaks the sixfold rotational symmetry of the crystal due to the phase shift between kagome layers and can explain the twofold symmetric CDW peak intensity observed by scanning tunneling spectroscopy. The coupling between the lattice and electronic degrees of freedom yields a weak first-order structural transition without continuous change of lattice dynamics. Our result emphasizes the fundamental role of lattice geometry in proper understanding of unconventional electronic orders in AV 3 Sb 5 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2018

Understanding the Kepler Reaction Wheels & Satellite

Following the loss of two reaction wheels four years into its mission, the Kepler team was faced with reinventing an operational approach to continue to deliver compelling science using an unanticipated suite of actuators. Spacecraft thrusters were not designed for accurate pointing control, yet with only two reaction wheels, only two axes could be actively controlled. With solar pressure as the only disturbing force, and recognizing the innate symmetry of the spacecraft, the K2 mission points the spacecraft in the orbital plane for three months at a time, placing the antennas 90° from the earth. Mapping the solar balance ridge 70 M km from Earth, with limited communications and a reduced staff presented a significant operational challenge.

Engineering↗
DOE OSTI2024

Classification of electronic nematicity in three-dimensional crystals and quasicrystals

Electronic nematic order has been reported in a rich landscape of materials, encompassing not only a range of intertwined correlated and topological phenomena but also different underlying lattice symmetries. Motivated by these findings, we investigate the behavior of electronic nematicity as the spherical symmetry of three-dimensional (3D) space is systematically lowered by the lattice environment. Here, we consider all 32 crystallographic point groups as well as four major classes of quasicrystalline point groups, given the recent observations of electronic phases of interest in quasicrystalline materials and artificial twisted quasicrystals. Valuable insights are gained by establishing a mapping between the five-component charge-quadrupolar nematic order parameter of the electronic fluid and the 3D tensorial order parameter of nematic liquid crystals. We find that a uniaxial nematic state is only generically realized in polyhedral point groups (icosahedral and cubic), with the nematic director pointing along different sets of rotational symmetry axes. Interestingly, icosahedral point groups are the only ones in which the five nematic order parameter components transform as the same irreducible representation, making them the closest analog of 3D isotropic nematics. In axial point groups, one of the nematic components is always condensed, whereas the other four components decompose into an in-plane and an out-of-plane nematic doublet, resulting in biaxial nematic ground states. Because these two nematic doublets behave as Z q clock order parameters, this allows us to identify the types of crystals and quasicrystals that can host interesting electronic nematic phenomena enabled by the critical properties of the q ≥ 4 clock model, such as emergent continuous nematic fluctuations in 3D, critical phases with quasi-long-range nematic order in two dimensions (2D), and Ashkin-Teller nematicity in 2D.

3-dimensional systems↗
DOE OSTI2022

Forbidden scalar dark matter and dark Higgses

As experimental searches for WIMP dark matter continue to yield null results, models beyond the WIMP paradigm have proliferated in order to elude ever improving observational constraints, among them that of sub-GeV dark matter mediated by a massive vector portal (a dark photon) associated with a new dark U(1) gauge symmetry. It has been previously noted that for a significant range of the parameter space of this class of models, the annihilation of dark matter particles into a pair of dark photons can dominate the freeze-out process even when this process is kinematically forbidden for dark matter at rest — this is known as the “forbidden dark matter” (FDM) regime. Prior studies of this regime, however, assume that any “dark Higgs” associated with breaking the dark U(1) and imparting mass to the dark photon is decoupled from the dark matter and as such plays no role in the freeze-out process. In this paper, we explore the effects of a dark Higgs on sub-GeV dark matter phenomenology in this FDM regime by considering the simplest possible construction in which there exist non-trivial dark matter-dark Higgs couplings: a model with a single complex scalar DM candidate coupled directly to the dark Higgs field. We find that for a wide range of parameter space, the dark Higgs can alter the resulting relic abundance by many orders of magnitude, and that this effect can remain significant even for a small dark matter-dark Higgs coupling constant. Considering measurements from direct detection and measurements of the CMB, we further find that points in this model’s parameter space which recreate the appropriate dark matter relic abundance suffer only mild constraints from other sources at present, but may become accessible in near-future direct detection experiments.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2025

Symmetry Determining Equations of the Rankine-Hugoniot Equations for Variable Velocity Shock Waves

The “constant velocity piston” problem (Fig. 1), also known as the “piston problem,” is a standard model for a one dimensional, in our case linear, symmetric shock wave moving through an inviscid, perfect gas. The model can be divided into two regions - a perturbed section on the left and an unperturbed section on the right - by a moving shock wave moving left to right. Both the perturbed and unperturbed sections, i.e. the shocked and unshocked regions, respectively, obey the Eulerian conservation equations; however, at the exact location of the shock, there is a mathematical discontinuity not satisfied by the Euler equations. To ensure continuity and conservation of certain quantities when crossing between the unshocked and shocked regions, we evoke a series of equations derived from the Eulerian conservation equations, called the Rankine-Hugoniot equations, or “jump” equations as it is often referred to in the literature on the topic. The classical constant-velocity piston problem assumes the piston features a constant driving velocity (among many other willing suspensions of belief required in the pursuit of a first principles equation model); consequent to this assumption is a constant-velocity shock and a constant-velocity shocked flow state. However, using Lie Group Theory (LGT), also known as symmetry analysis, we can attempt to reinterpret the model with a shock wave of variable velocity in time and space. An extension of the model in this way opens up the possibility for obtaining new analytical solutions to the piston problem for certain shock velocity models. In this report, we use LGT to derive the symmetry determining equations (SDEs), whose solutions are Lie groups, which permit analytical solutions. In the future, we can then use the SDEs to define constraint equations on the shock velocity model and what the successive solutions to the Euler equations might be based off such constraints. This report is structured as follows: Section 2 provides a brief derivation of the Rankine-Hugoniot (“jump”) equations; Section 3 gives an overview of Lie group theory; Section 4 derives the SDEs of the jump equations; Section 5 derives the Euler conservation equations for fluids; and Section 6 presents concluding remarks and opportunities for future studies.

42 ENGINEERING↗
DOE OSTI2021

(2, 2) Scattering and the celestial torus

Analytic continuation from Minkowski space to (2, 2) split signature spacetime has proven to be a powerful tool for the study of scattering amplitudes. Here we show that, under this continuation, null infinity becomes the product of a null interval with a celestial torus (replacing the celestial sphere) and has only one connected component. Spacelike and timelike infinity are time-periodic quotients of AdS 3 . These three components of infinity combine to an S 3 represented as a toric fibration over the interval. Privileged scattering states of scalars organize into SL(2, $\mathbb{R}$) L ×SL(2, $\mathbb{R}$) R conformal primary wave functions and their descendants with real integral or half-integral conformal weights, giving the normally continuous scattering problem a discrete character.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Pressure Induced Topological Quantum Phase Transition in Weyl Semimetal T d -MoTe 2

In this paper, we report the temperature and pressure (p max ≃1.5 GPa) evolution of the crystal structure of the Weyl semimetal T d -MoTe 2 by combination of neutron diffraction and the X-ray total scattering experiments. We find that the fundamental non-centrosymmetric structure T d is fully suppressed and transforms into a centrosymmertic 1T' structure at a critical pressure of p cr ~ 1.2–1.4 GPa. This is strong evidence for a pressure induced quantum phase transition (QPT) between topological to a trivial electronic state. Although the topological QPT has strong effect on magnetoresistance, it is interesting that the superconducting (SC) critical temperature T c , the superfluid density, and the SC gap all change smoothly and continuously across p cr and no sudden effects are seen concomitantly with the suppression of the T d structure. This implies that the T c , and thus the SC pairing strength, is unaffected by the topological QPT. However, the QPT requires the change in the SC gap symmetry from non-trivial s +- to a trivial s ++ state, which we discuss in this work. Our systematic characterizations of the structure and SC properties associated with the topological QPT provide deep insight into the pressure induced phase diagram in this topological quantum material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Impact of microstructure on elastic properties in the alloy Ti-42Al-8.5 Nb

The microstructure of a γ-TiAl alloy containing niobium undergoes continuous transformations during annealing at 550 °C. These take place within the α 2 -phase of lamellar (α 2 +γ) colonies. We have characterized these changes by transmission electron microscopy and made a correlation to the elastic constants determined by resonant ultrasonic spectroscopy during in-situ annealing at the same temperature. Further, the results show a continuous increase of the E-modulus. This can be attributed to elastic strains acting within α 2 lamellae as a result of lattice transformations. After 5000h, a thermodynamic equilibrium was established with equal fractions of α 2 -phase and O-phase that differ only in lattice symmetry and Nb content. Generally, the presence of O-phase should contribute to lower elastic moduli, however in the present case the evolving microstructural characteristics were responsible for the observed increase in the E-modulus.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Schrödinger cat states of a nuclear spin qudit in silicon

High-dimensional quantum systems are a valuable resource for quantum information processing. They can be used to encode error-correctable logical qubits, which has been demonstrated using continuous-variable states in microwave cavities or the motional modes of trapped ions. For example, high-dimensional systems can be used to realize ‘Schrödinger cat’ states, which are superpositions of widely displaced coherent states that can be used to illustrate quantum effects at large scales. Recent proposals have suggested encoding qubits in high-spin atomic nuclei, which are finite-dimensional systems that can host hardware-efficient versions of continuous-variable codes. Here, in this study, we demonstrate the creation and manipulation of Schrödinger cat states using the spin-7/2 nucleus of an antimony atom embedded in a silicon nanoelectronic device. We use a multi-frequency control scheme to produce spin rotations that preserve the symmetry of the qudit, and we constitute logical Pauli operations for qubits encoded in the Schrödinger cat states. Our work demonstrates the ability to prepare and control non-classical resource states, which is a prerequisite for applications in quantum information processing and quantum error correction, using our scalable, manufacturable semiconductor platform.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

RANS Simulation of Variable Density Turbulent Round Jets with Coflow using xRAGE Hydrodynamic Code and BHR Turbulence Models

This work for the fiscal year 2023 (FY23) is a continuation of previous efforts to evaluate the BHR turbulence models for their ability to accurately simulate variable density turbulent round jets with coflow. As before, RANS simulations are carried out using the xRAGE hydrodynamic code. The following are some of the previous findings. Israel showed that i) the symmetry boundary conditions for the BHR models in axisymmetric simulations were in error, ii) three grids of different resolutions did not lead to converging solutions, and iii) BHR 3.1 simulation exhibited instabilities and did not reach a steady state. Saenz and Rauenzahn derived and implemented into xRAGE the correct BHR boundary conditions at the symmetry axis. Cline conducted sensitivity studies with various parameters including the BHR models (versions 2, 3.1 and 4), gravity, material pressure, specific heat, initial turbulent kinetic energy and initial turbulent length scale, and found that the largest factor impacting on simulation results was the BHR model version, followed by the initial turbulent length scale. In addition, freeze boundary conditions at the exit and the side wall of the computational domain were used to remove anomalous flow behavior. Cline adjusted the inlet jet velocity, initial turbulent kinetic energy and initial turbulent length scale to obtain the best reasonable match with the experimental data of Charonko and Prestridge. It was found that the BHR 2 and 3.1 models performed in a similar manner, but the BHR 2 model produced much lower levels of density-specific-volume covariance and turbulent kinetic energy. The main focus for the FY23 is to study the effects of computational parameters related to the boundary conditions, mesh, domain size and timestep size. The reasoning behind this is that, unless simulation results can be shown to be reasonably independent from the aforementioned computational parameters, it would be difficult to attribute any discrepancies between simulation and experimental results to turbulence models. This important aspect has largely been overlooked in the previous years, and therefore will be studied comprehensively here. Additionally, effects of varying the initial turbulent length scale will be examined because it was previously identified as a major factor affecting the flow fields.

42 ENGINEERING↗
NASA NTRS1993

Remarks about massive and massless particles in supersymmetry

The internal space-time symmetry and simple supersymmetry of relativistic particles are briefly discussed in terms of the little group of the Poincare group. The little group generators in a finite-dimensional matrix representation of the N = 1 super-Poincare algebra are explicitly constructed. The supergeometry of a massive case continuously becomes that of a massless case in the infinite-momentum limit. The origin of the gage transformations associated with the massless supermultiplets becomes transparent in that limit.

Ketov, S. V.↗
DOE OSTI2023

Denial of Service Attack Detection via Differential Analysis of Generalized Entropy Progressions

Denial-of-Service (DoS) attacks are one the most common and consequential cyber attacks in computer networks. While existing research offers a plethora of detection methods, the issue of achieving scalability, a low false positive rate, and high detection accuracy remains open. In this work, we address this problem by developing a differential method based on generalized entropy progression. In this method, named as DoDGE, we continuously fit the line of best fit to the entropy progression of destination addresses and check if the derivative, that is, the slope of this line is less than the negative of the dynamically computed standard deviation of the derivatives. Furthermore, to distinguish from flash events, we leverage the symmetry that when a flash event occurs, the derivative of the entropy progression of source addresses is positive. With this design, we omit the usage of the thresholds and the results with five real-world network traffic datasets confirm that DoDGE outperforms threshold-based DoS attack detection by two orders of magnitude in terms of false positives on average. When compared to ten machine learning (ML) models, DoDGE achieves a balanced accuracy of 99%, while the average balanced accuracy for the ML models is 52%. Moreover, the results show that DoDGE successfully differentiates between a flash event and a DoS attack. Furthermore, since the main computation cost of DoDGE is the entropy computation, which is linear in the volume of the unit-time network flow, uses integer only operations, and works on a small fraction of the total flow, it is lightweight and scalable.

Cybersecurity, wireless communication↗
DOE OSTI2025

Novel quantum states of matter in moiré materials (2023 Aspen Winter Conference)

This report is to summarize the proceedings of the conference “Novel Quantum States of Matter in Moiré Materials,” which was held at the Aspen Center for Physics, March 12 – 17, 2023. The conference organizers thank the Department of Energy (DOE) for providing funding support for the conference. The advent of moiré quantum materials has opened a highly tunable platform for exploring the interplay between electronic structure, interactions, symmetry, and topology. Since the discovery of correlated insulator states and superconductivity in magic-angle twisted bilayer graphene (MATBG), a growing variety of moiré systems have emerged, revealing novel correlated and topological phenomena such as quantum anomalous Hall systems, generalized Wigner crystals, and fractional Chern insulators. This rich phenomenology continues to attract intense theoretical and experimental interest.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2002

A Proposed Pathway for the Nucleation and Crystal Growth of the Tetragonal Form of Lysozyme

A number of factors, the shape and charge distribution anisotropy, multiple components in the solution (buffer + counter ion, precipitant, protein, and water), conformational flexibility, and large numbers of intermolecular contacts, all serve as complicating variables in understanding the nucleation and growth mechanism for macromolecules. Intermolecular contacts include hydrogen bonds, van der Waals, hydrophobic, salt bridges, and ion-mediated contacts. The latter interactions are stronger and give specificity while the others are weaker, more prevalent, and more promiscuous, i.e., can lead to a range of possible molecular interactions. We propose that for tetragonal lysozyme, and by extension many other monomeric proteins, there is a solution-phase assembly process to form 4(sub 3) helix structures that are the basic unit for nucleation. The formation of these structures is continuous and concentration dependent. They subsequently also servc as growth units, with that process then being a recapitulation of the nucleation process. The advantages of solution phase assembly are the immediate burying of the strongest interactions, removing them from subsequent participation in the nucleation and growth process, and the introduction of symmetry into the system, which also assists in the assembly process.

Pusey, Marc L.↗
DOE OSTI2021

Exotic $\mathbb{Z}_N$ symmetries, duality, and fractons in 3+1-dimensional quantum field theory

Following our earlier analyses of nonstandard continuum quantum field theories, we study here gapped systems in 3+1 dimensions, which exhibit fractonic behavior. In particular, we present three dual field theory descriptions of the low-energy physics of the X-cube model. A key aspect of our constructions is the use of discontinuous fields in the continuum field theory. Spacetime is continuous, but the fields are not.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Holographic BCFT with a Defect on the End-of-the-World brane

In this paper, we propose a new gravity dual for a 2d BCFT with two conformal boundaries by introducing a defect that connects the two End-of-the-World branes. We demonstrate that the BCFT dual to this bulk model exhibits a richer lowest spectrum. The corresponding lowest energy eigenvalue can continuously interpolate between - πc 24 Δ x and 0 where Δ x is the distance between the boundaries. This range was inaccessible to the conventional AdS/BCFT model with distinct boundary conditions. We compute the holographic entanglement entropy and find that it exhibits three different phases, one of which breaks the time reflection symmetry. We also construct a wormhole saddle, analogous to a 3d replica wormhole, which connects different boundaries through the AdS bulk. This saddle is present only if the BCFT is non-unitary and is always subdominant compared to the disconnected saddle.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗