Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Coercivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

242 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Improvements to the Powder Processing of near-Final Shape alnico Magnets

Alnico permanent magnets (PMs), a recent PM system of interest as an attractive rare earth-free PM alternative, have advantageous high operating temperature and magnetic saturation with the potential for utilization in electric machines, e.g. interior-PM motors found in electric vehicles, if current directional solidification methods can be replaced by a true mass production approach. Recently, two unique alnico compositions, termed Full-Co and Co-lean, with improved coercivity, were gas atomized, compression molded, and vacuum sintered (4h at 1240°C) to high densities of 97.8% and 99.3%, respectively. However, the Co-lean remained fine grained isotropic magnets and the Full-Co grains were not textured, lowering magnetic strength in spite of attempts to grow large textured grains by a stress-biased solid state grain alignment method to convert them to high energy anisotropic magnets. It was hypothesized that oxidation during de-binding in air left many prior particle boundary oxides within the sintered microstructure that hindered grain growth and texturing during the stress-biased texturing procedure and prevented the desired abnormal grain growth (AGG). Here we explored a vacuum de-binding step that was linked (in-place) to vacuum sintering and found that the Co-lean exhibited faster uniform grain growth that doubled the average grain size (40 μm to 80 μm). Linked vacuum de-binding and sintering of Full-Co produced some AGG after only 1 h of 1240°C sintering. A new direction for promoting AGG (and stress-biased texturing) in alnico is being explored that utilizes a fundamental analysis of systems with second phase particles that either inhibit or boost grain growth. This effort explores the influence of vacuum de-binding linked to a series of lower sintering temperatures at a fixed time (4h) to see if oxide particle size and volume fraction can be changed to promote AGG conditions in alnico. Surprising qualitative results indicate that AGG may be promoted for vacuum sintering at less than 1200°C.

Rinko, Emily↗
DOE OSTI2022

Solid state grain alignment of permanent magnets in near-final shape

Magnet microstructure manipulation in the solid state by controlled application of a sufficient stress in a direction during high temperature annealing in a single-phase region of heat-treatable magnet alloys, e.g., alnico-type magnets is followed by magnetic annealing and draw annealing to improve coercivity and saturation magnetization properties. The solid-state process can be termed highly controlled abnormal grain growth (hereafter AGG) and will make aligned sintered anisotropic magnets that meet or exceed the magnetic properties of cast versions of the same alloy types.

Anderson, Iver E.↗
DOE OSTI2023

A Landau-Devonshire Approach of Elastic Strain Effects on Ferroelectric Al1-xScxN

Landau-Devonshire thermodynamic modeling enables the phenomenological description of ferroelectrics. 1 The approach has been validated across a wide range of ferroelectric materials from the first ferroelectric discovered, Rochelle Salt, to recent HfO2-based materials. 2-4 Extension to what is now referred to as the Landau-Ginsburg-Devonshire model enables rigorous investigation of polarization boundaries and reorientation, phase transformations, and domain formation/evolution. We present a thermodynamic analysis of the recently discovered nitride ferroelectric materials 5-7 using the classic Landau-Devonshire approach. The electrostrictive and dielectric stiffness coefficients of Al1-xScxN with wurtzite structure (6mm) are determined using a free energy density function assuming a hexagonal parent phase (6/mmm), with the first order phase transition based on the dielectric stiffness relationships (Fig. 1). The results of this analysis show that the strain sensitivity of the energy barrier is one order of magnitude larger than that of the spontaneous polarization in these wurtzite ferroelectrics, yet both are less sensitive to strain compared to classic perovskite ferroelectrics (Fig. 2). These analysis results reported here explain experimentally reported sensitivity of coercive field to elastic strain/stress in Al1-xScxN films, and would enable further thermodynamic analysis via phase field simulation and related methods.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2021

Structural and magnetic properties of hard magnetic system Ce(Co 1 -Fe ) 4.4 Cu 0.6 (0 ≤ x ≤ 0.19)

The Ce(Co 1 -Fe ) 4.4 Cu 0.6 (0 ≤ x ≤ 0.19) is a composite, hard magnetic system that is based on the CaCu 5 -type structure (1:5). It shows both, unique magnetic and microstructural features that are essential for permanent magnets, e.g., exceptional squareness of the 2nd. quadrant of the magnetization loops and microstructural features typically needed for pinning. Samples solidified in alumina crucibles are coarse-grained and often clearly faceted and readily align in a magnetic field. X-ray, SEM, and TEM analyses show a 1:5-type single-phase material when quenched from high temperature, which, after heat treatment, transforms into a laminar coherent nanostructure through the formation of a dense array of extended intercalated regions. Furthermore, these extended intercalated regions are comprised of segments of the Ce 2 Ni 7 –type structure (2:7) which segregate into various closely related precipitates forming a nanostructure similar to the SmCo 5 - Sm 2 Co 17 composites seen in Sm-Co permanent magnets. Based on TEM and Lorentz microscopy of well-aligned single grain particles, the magnetic domains’ reversal mechanism is regulated by anisotropy fluctuations occurring along the easy direction of magnetization and strong exchange interactions between the matrix and defects (e.g.: stacking faults). Lorentz microscopy suggests the domain wall is not physically pinned by the defect, but rather is offset/deflected when it interacts with the defect. The Lorentz and magnetization data suggest that defects cause a bending of the moment away from the c axis inside the grains.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Intrinsic and hard magnetic properties of (Sm 1-x R x )-Fe-Co-V alloys (R = Gd, Zr, and Y)

SmFe 12 -based compounds with the ThMn 12 -type structure have a great potential as future rare-earth-lean permanent magnets. However, their reliance on stabilizing non-magnetic elements has impeded practical applications. Therefore, elements such as Gd, Y, and Zr have gained popularity as candidates to minimize the need for stabilizing elements by reducing the formation energy of the ThMn 12 (1:12) phase. Here, this study examines the effect of Gd, Y, and Zr on the intrinsic and hard magnetic properties in (Sm 1-x R x ) 1.2 Fe 8.4 Co 2.1 V 1.5 (or with nominal composition of (Sm 1-x R x ) 9.1 Fe 63.6 Co 15.9 V 11.4 ) with a single 1:12 phase for 0 ≤ x ≤ 0.3. Notably, samples substituted with Gd exhibit an enhanced temperature dependence of the magnetic properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Manipulating ferroelectric behaviors via electron-beam induced crystalline defects

Ferroelectric nanoplates are attractive for applications in nanoelectronic devices. Defect engineering has been an effective way to control and manipulate ferroelectric properties in nanoscale devices. Defects can act as pinning centers for ferroelectric domain wall motion, altering the switching properties and domain dynamics of ferroelectrics. However, there is a lack of detailed investigation on the interactions between defects and domain walls in ferroelectric nanoplates due to the limitation of previous characterization techniques, which impedes the development of defect engineering in ferroelectric nanodevices. In this study, we applied in situ biasing transmission electron microscopy to explore how dislocation loops, which were judiciously introduced into barium titanate nanoplates via electron beam irradiation, affect the motion of ferroelectric domain walls. The results show that the motion was dramatically suppressed by these localized defects, because of the local strain fields induced by the defects. Additionally, the pinning effect can be further enhanced by multiple domain walls embedded with defect arrays. These results indicate the possibility of manipulating domain switching in ferroelectric nanoplates via the electron beam.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Applied Magnetic Field Increases Magnetic Anisotropy in HDDR-Processed Nd-Fe-B Alloy

We investigate the effect of an applied magnetic field on the entire HDDR process using a customized reactor vessel and a warm-bore superconducting magnet. We analyzed the resulting properties produced at both a 0 applied field and a 2 Tesla applied field. We show that the application of a magnetic field throughout the HDDR process results in powders that exhibit a greater level of anisotropy compared to their ambient field counterparts.

36 MATERIALS SCIENCE↗