Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Code Extraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Resonance Effects in the NASA Transonic Flutter Cascade Facility

Investigations of unsteady pressure loadings on the blades of fans operating near the stall flutter boundary are carried out under simulated conditions in the NASA Transonic Flutter Cascade facility (TFC). It has been observed that for inlet Mach numbers of about 0.8, the cascade flowfield exhibits intense low-frequency pressure oscillations. The origins of these oscillations were not clear. It was speculated that this behavior was either caused by instabilities in the blade separated flow zone or that it was a tunnel resonance phenomenon. It has now been determined that the strong low-frequency oscillations, observed in the TFC facility, are not a cascade phenomenon contributing to blade flutter, but that they are solely caused by the tunnel resonance characteristics. Most likely, the self-induced oscillations originate in the system of exit duct resonators. For sure, the self-induced oscillations can be significantly suppressed for a narrow range of inlet Mach numbers by tuning one of the resonators. A considerable amount of flutter simulation data has been acquired in this facility to date, and therefore it is of interest to know how much this tunnel self-induced flow oscillation influences the experimental data at high subsonic Mach numbers since this facility is being used to simulate flutter in transonic fans. In short, can this body of experimental data still be used reliably to verify computer codes for blade flutter and blade life predictions? To answer this question a study on resonance effects in the NASA TFC facility was carried out. The results, based on spectral and ensemble averaging analysis of the cascade data, showed that the interaction between self-induced oscillations and forced blade motion oscillations is very weak and can generally be neglected. The forced motion data acquired with the mistuned tunnel, when strong self-induced oscillations were present, can be used as reliable forced pressure fluctuations provided that they are extracted from raw data sets by an ensemble averaging procedure.

Lepicovsky, J.↗
NASA NTRSDate not supplied

Turbo-Design: Open-Source Radial Equilibrium Turbomachinery Solver: Part I - Turbines

Advances in 3D Geometrical Designs and Cooling have played a significant role in improving the efficiency of turbomachinery. However, these advancements must be effectively translated back to the modeler. Machine learning can facilitate this transition. Specifically, machine learning–based loss models can bridge the gap between 3D and 1D designs, enabling modelers not only to predict velocity triangles but also to extract additional geometric features. Currently, the design tools used at NASA have not been updated to support such integration—until now. TurboDesign is an open-source, Python-based framework that replaces TD2 (LEW-11029-1) and AXOD2 (LEW-16323-1), both of which are radial equilibrium solvers for axial turbines. The goal of this update is to enable the integration of machine learning loss models into radial equilibrium equations. Additionally, TurboDesign is designed to support radial machines. This paper presents the governing equations, the assumptions underlying the code, the integration of legacy loss models, an example of machine learning model integration, and a validation comparison with CFD. All code, tutorials, and documentation are available at: https://www.github.com/nasa/turbo-design

Radial Equilibrium↗
NASA NTRS2004

MPT Prediction of Aircraft-Engine Fan Noise

A collection of computer programs has been developed that implements a procedure for predicting multiple-pure-tone (MPT) noise generated by fan blades of an aircraft engine (e.g., a turbofan engine). MPT noise arises when the fan is operating with supersonic relative tip Mach No. Under this flow condition, there is a strong upstream running shock. The strength and position of this shock are very sensitive to blade geometry variations. For a fan where all the blades are identical, the primary tone observed upstream of the fan will be the blade passing frequency. If there are small variations in geometry between blades, then tones below the blade passing frequency arise MPTs. Stagger angle differences as small as 0.1 can give rise to significant MPT. It is also noted that MPT noise is more pronounced when the fan is operating in an unstarted mode. Computational results using a three-dimensional flow solver to compute the complete annulus flow with non-uniform fans indicate that MPT noise can be estimated in a relatively simple way. Hence, once the effect of a typical geometry variation of one blade in an otherwise uniform blade row is known, the effect of all the blades being different can be quickly computed via superposition. Two computer programs that were developed as part of this work are used in conjunction with a user s computational fluid dynamics (CFD) code to predict MPT spectra for a fan with a specified set of geometric variations: (1) The first program ROTBLD reads the users CFD solution files for a single blade passage via an API (Application Program Interface). There are options to replicate and perturb the geometry with typical variations stagger, camber, thickness, and pitch. The multi-passage CFD solution files are then written in the user s file format using the API. (2) The second program SUPERPOSE requires two input files: the first is the circumferential upstream pressure distribution extracted from the CFD solution on the multi-passage mesh, the second file defines the geometry variations of each blade in a complete fan. Superposition is used to predict the spectra resulting from the geometric variations.

Connell, Stuart D.↗
NASA NTRS2011

Multipoint Observations of Coronal Mass Ejection and Solar Energetic Particle Events on Mars and Earth During November 2001

Multipoint spacecraft observations provide unique opportunities to constrain the propagation and evolution of interplanetary coronal mass ejections (ICMEs) throughout the heliosphere. Using Mars Global Surveyor (MGS) data to study both ICME and solar energetic particle (SEP) events at Mars and OMNI and Geostationary Operational Environmental Satellite (GOES) data to study ICMEs and SEPs at Earth, we present a detailed study of three CMEs and flares in late November 2001. In this period, Mars trailed Earth by 56deg solar longitude so that the two planets occupied interplanetary magnetic field lines separated by only approx.25deg. We model the interplanetary propagation of CME events using the ENLIL version 2.6 3-D MHD code coupled with the Wang-Sheeley-Arge version 1.6 potential source surface model, using Solar and Heliospheric Observatory (SOHO) Large Angle and Spectrometric Coronagraph (LASCO) images to determine CME input parameters. We find that multipoint observations are essential to constrain the simulations of ICME propagation, as two very different ICMEs may look very similar in only one observational location. The direction and width of the CME as parameters essential to a correct estimation of arrival time and amplitude of the ICME signal. We find that these are problematic to extract from the analysis of SOHO/LASCO images commonly used for input to ICME propagation models. We further confirm that MGS magnetometer and electron reflectometer data can be used to study not only ICME events but also SEP events at Mars, with good results providing a consistent picture of the events when combined with near-Earth data.

Falkenberg, T. V.↗
NASA NTRS2016

SEEDS Direct Imaging of the RV-Detected Companion to V450 Andromedae, and Characterization of the System

We report the direct imaging detection of a low-mass companion to a young, moderately active star V450 And, that was previously identified with the radial velocity (RV) method. The companion was found in high-contrast images obtained with the Subaru Telescope equipped with the HiCIAO camera and AO188 adaptive optics system. From the public ELODIE and SOPHIE archives we extracted available high-resolution spectra and RV measurements, along with RVs from the Lick planet search program. We combined our multi-epoch astrometry with these archival, partially unpublished RVs, and found that the companion is a low-mass star, not a brown dwarf, as previously suggested. We found the best-fitting dynamical masses to be m(sub 1) = 1.141(sup + 0.037, sub - 0.091) and m(sub 2) = 0.279(sup + 0.023, sub - 0.020) solar mass. We also performed spectral analysis of the SOPHIE spectra with the iSpec code. Hipparcos time-series photometry shows a periodicity of P = 5.743 day, which is also seen in the SOPHIE spectra as an RV modulation of the star A. We interpret it as being caused by spots on the stellar surface, and the star to be rotating with the given period. From the rotation and level of activity, we found that the system is 380(sup + 220, sub -100) Myr old, consistent with an isochrone analysis (220 (sup +2120, sub -90) Myr). This work may serve as a test case for future studies of low mass stars, brown dwarfs, and exoplanets by combination of RV and direct imaging data.

direct imaging detection of a low-mass companion↗
NASA NTRSDate not supplied

Development of Improved Thermal Analysis Capabilities at the NASA Goddard Space Flight Center

Goddard Space Flight Center (GSFC) has been developing a framework of additional analysis capabilities to aid in the verification, development, and execution of thermal models using the OpenTD Application Programming Interface (API). This paper provides a brief overview of the data structures, properties, methods, and relationships between the objects accessible through the current API and describes some of the algorithms necessary to implement the desired functions at GSFC. Some example code snippets are also provided to aid potential users in the development of their own utilities. Following the overview are descriptions and algorithm methodologies of the new capabilities added to the GSFC framework, including: a new PI heater/controller approach for improved steady state predictions, selective copying of symbol over-rides from one source CaseSet to destination CaseSet(s), comparison of submodel object counts between a source and destination model to verify model integration, comparison of thermo-optical and thermo-physical properties between models, and improved display of extracted thermo-optical and thermo-physical properties for documentation.

ThermalDesktop↗
NASA NTRSDate not supplied

Development of Improved Thermal Analysis Capabilities at the NASA Goddard Space Flight Center

Goddard Space Flight Center (GSFC) has been developing a framework of additional analysis capabilities to aid in the verification, development, and execution of thermal models using the OpenTD Application Programming Interface (API). This paper provides a brief overview of the data structures, properties, methods, and relationships between the objects accessible through the current API and describes some of the algorithms necessary to implement the desired functions at GSFC. Some example code snippets are also provided to aid potential users in the development of their own utilities. Following the overview are descriptions and algorithm methodologies of the new capabilities added to the GSFC framework, including: a new PI heater/controller approach for improved steady state predictions, selective copying of symbol over-rides from one source CaseSet to destination CaseSet(s), comparison of submodel object counts between a source and destination model to verify model integration, comparison of thermo-optical and thermo-physical properties between models, and improved display of extracted thermo-optical and thermo-physical properties for documentation.

ThermalDesktop, API, v6.2, OpenTD↗
NASA NTRS2006

LISA Framework for Enhancing Gravitational Wave Signal Extraction Techniques

This paper describes the development of a Framework for benchmarking and comparing signal-extraction and noise-interference-removal methods that are applicable to interferometric Gravitational Wave detector systems. The primary use is towards comparing signal and noise extraction techniques at LISA frequencies from multiple (possibly confused) ,gravitational wave sources. The Framework includes extensive hybrid learning/classification algorithms, as well as post-processing regularization methods, and is based on a unique plug-and-play (component) architecture. Published methods for signal extraction and interference removal at LISA Frequencies are being encoded, as well as multiple source noise models, so that the stiffness of GW Sensitivity Space can be explored under each combination of methods. Furthermore, synthetic datasets and source models can be created and imported into the Framework, and specific degraded numerical experiments can be run to test the flexibility of the analysis methods. The Framework also supports use of full current LISA Testbeds, Synthetic data systems, and Simulators already in existence through plug-ins and wrappers, thus preserving those legacy codes and systems in tact. Because of the component-based architecture, all selected procedures can be registered or de-registered at run-time, and are completely reusable, reconfigurable, and modular.

Thompson, David E.↗
NASA NTRS2010

Performance of Waterless Concrete

The development of permanent lunar bases is constrained by performance of construction materials and availability of in-situ resources. Concrete seems a suitable construction material for the lunar environment, but water, one of its major components, is an extremely scarce resource on the Moon. This study explores an alternative to hydraulic concrete by replacing the binding mix of concrete (cement and water) with sulfur. Sulfur is a volatile element on the lunar surface that can be extracted from lunar soils by heating. Sulfur concrete mixes were prepared to investigate the effect of extreme environmental conditions on the properties of sulfur concrete. A hypervelocity impact test was conducted, having as its target a 5-cm cubic sample of sulfur concrete. This item consisted of JSC-1 lunar regolith simulant (65%) and sulfur (35%). The sample was placed in the MSFC Impact Test Facility s Micro Light Gas Gun target chamber, and was struck by a 1-mm diameter (~1.4e-03 g) aluminum projectile at 5.85 km/s. In addition, HZTERN code, provided by NASA was used to study the effectiveness of sulfur concrete when subjected to space radiation.

Toutanji, Houssam↗
NASA NTRS2005

Using Microwave and Infrared Radiances from Off-Nadir Pixels: Application of Radiative Transfer to Slanted Line-of-Sight and Comparisons with NASA EOS Aqua Data

The passive infrared and microwave nadir sounders such as (A)TOVS observe the atmosphere from a polar orbit by directing their scan pointed at the ground up to about 49 degrees from nadir. Except for the pixels located right on the satellite ground track, the radiance measurements collected by these instruments characterize hence atmospheric emission paths which are slanted with respect to the zenithal direction at the ground. At the outer swath edges, the deviations from nadir reach about 60 degrees in terms of Satellite Zenith Angle (SZA). The radiative transfer codes used in operational Numerical Weather Prediction applications make the appropriate corrections to account for the extra path induced by the non-zero SZA. However, no corrections are made to account for the fact that the atmospheric profiles along the slanted line-of-sight (LOS) are different from the vertical because of horizontal gradients in the atmosphere. Using NASA EOS Aqua satellite's orbits, zenith and azimuth angles, as well as three-dimensional fields of temperature, water vapor, and ozone produced by the NASA Global Modeling and Assimilation Office, we extracted slanted atmospheric profiles for actual soundings performed by the AIRS and AMSU-A instruments onboard EOS Aqua. We will present the results of our study comparing the calculated brightness temperatures along slanted LOS and vertical LOS with AIRS and AMSU-A observations.

Poli, Paul↗
NASA NTRS2013

Assessment of the Reconstructed Aerodynamics of the Mars Science Laboratory Entry Vehicle

On August 5, 2012, the Mars Science Laboratory entry vehicle successfully entered Mars atmosphere, flying a guided entry until parachute deploy. The Curiosity rover landed safely in Gale crater upon completion of the Entry Descent and Landing sequence. This paper compares the aerodynamics of the entry capsule extracted from onboard flight data, including Inertial Measurement Unit (IMU) accelerometer and rate gyro information, and heatshield surface pressure measurements. From the onboard data, static force and moment data has been extracted. This data is compared to preflight predictions. The information collected by MSL represents the most complete set of information collected during Mars entry to date. It allows the separation of aerodynamic performance from atmospheric conditions. The comparisons show the MSL aerodynamic characteristics have been identified and resolved to an accuracy better than the aerodynamic database uncertainties used in preflight simulations. A number of small anomalies have been identified and are discussed. This data will help revise aerodynamic databases for future missions and will guide computational fluid dynamics (CFD) development to improved prediction codes.

Schoenenberger, Mark↗
NASA NTRS2020

Mars Rodwell Experiment Final Report

Developed by Army engineer Raul Rodriguez at Camp Century in Greenland during the early 1960s, a Rodriguez Well uses heat exchangers and a submersible pump to create a cavity deep under a glacier’s surface and cycle the heated water up an ice shaft, siphoning a portion of the flow for consumption before sending the rest back down to the well. To evaluate the performance of a Rodriguez Well as one of multiple approaches for extracting water from massive ice deposits on Mars, a series of tests were performed at the Johnson Space Center (JSC) Energy Systems Test Area (ESTA) Facility under Martian equivalent environmental factors such as atmospheric and water surface pressure and density. These values were then used to create an energy balance model for a Martian Rodriguez Well, replacing the terrestrial environmental factors with the found Martian equivalents in a computer model published by the Cold Regions Research and Engineering Laboratory (CRREL). This report documents the test results and the subsequent findings from running the modified code.

Mars↗
NASA NTRS2005

Liquid Nitrogen (Oxygen Simulent) Thermodynamic Venting System Test Data Analysis

In designing systems for the long-term storage of cryogens in low gravity space environments, one must consider the effects of thermal stratification on excessive tank pressure that will occur due to environmental heat leakage. During low gravity operations, a Thermodynamic Venting System (TVS) concept is expected to maintain tank pressure without propellant resettling. The TVS consists of a recirculation pump, Joule-Thomson (J-T) expansion valve, and a parallel flow concentric tube heat exchanger combined with a longitudinal spray bar. Using a small amount of liquid extracted by the pump and passing it though the J-T valve, then through the heat exchanger, the bulk liquid and ullage are cooled, resulting in lower tank pressure. A series of TVS tests were conducted at the Marshall Space Flight Center using liquid nitrogen as a liquid oxygen simulant. The tests were performed at fill levels of 90%, 50%, and 25% with gaseous nitrogen and helium pressurants, and with a tank pressure control band of 7 kPa. A transient one-dimensional model of the TVS is used to analyze the data. The code is comprised of four models for the heat exchanger, the spray manifold and injector tubes, the recirculation pump, and the tank. The TVS model predicted ullage pressure and temperature and bulk liquid saturation pressure and temperature are compared with data. Details of predictions and comparisons with test data regarding pressure rise and collapse rates will be presented in the final paper.

Hedayat, A.↗
NASA NTRS1992

Numerical classification of coding sequences

DNA sequences coding for protein may be represented by counts of nucleotides or codons. A complete reading frame may be abbreviated by its base count, e.g. A76C158G121T74, or with the corresponding codon table, e.g. (AAA)0(AAC)1(AAG)9 ... (TTT)0. We propose that these numerical designations be used to augment current methods of sequence annotation. Because base counts and codon tables do not require revision as knowledge of function evolves, they are well-suited to act as cross-references, for example to identify redundant GenBank entries. These descriptors may be compared, in place of DNA sequences, to extract homologous genes from large databases. This approach permits rapid searching with good selectivity.

Non-NASA Center↗
NASA NTRS1997

TURBO-AE: An Aeroelastic Code for Propulsion Applications

NASA's Advanced Subsonic Technology (AST) program is developing new technologies to increase the fuel efficiency of commercial aircraft engines, improve the safety of engine operation, and reduce engine emissions and noise. With the development of new designs for ducted fans, compressors, and turbines to achieve these goals, a basic aeroelastic requirement is that there should be no flutter or high resonant blade stresses in the operating regime. To verify the aeroelastic soundness of these designs, we need an accurate prediction and analysis code. Such a two-dimensional viscous propulsion aeroelastic code, named TURBO-AE, is being developed at the NASA Lewis Research Center. The TURBO-AE aeroelastic code is based on a three-dimensional unsteady aerodynamic Euler/Navier-Stokes turbomachinery code TURBO, developed under a grant from NASA Lewis. TURBO-AE can model viscous flow effects that play an important role in certain aeroelastic problems, such as flutter with flow separation (or stall flutter) and flutter in the presence of shock and boundary-layer interaction. The structural dynamics representation of the blade in the TURBO-AE code is based on a normal mode representation. A finite element analysis code, such as NASTRAN, is used to calculate in-vacuum vibration modes and the associated natural frequency. A work-per-cycle approach is used to determine aeroelastic (flutter) stability. With this approach, the motion of the blade is prescribed to be a harmonic vibration in a specified in vacuum normal mode. The aerodynamic forces acting on the vibrating blade and the work done by these forces on the vibrating blade during a cycle of vibration are calculated. If positive work is being done on the blade by the aerodynamic forces, the blade is dynamically unstable, since it will extract energy from the flow, leading to an increase in the amplitude of the blade's oscillation. Initial calculations have been done for a configuration representative of the Energy Efficient Engine fan rotor. The accompanying figure shows the work-per-cycle after each cycle of vibration. It can be seen that the work-per-cycle does not vary much after the fourth cycle. The negative sign of the converged work-per-cycle shows that the fan blade is dynamically stable and will not flutter. TURBO-AE will provide a useful aeroelastic prediction/analysis capability for engine manufacturers. It will reduce design cycle times by allowing new blade designs to be verified for aeroelastic soundness before blades are built and tested. With this prediction capability, it will be possible to build thinner, lighter, and faster rotating blades without encountering aeroelastic problems like stall flutter and high-cycle fatigue due to forced vibrations.

Bakhle, Milind A.↗
NASA NTRS2017

An Application Programming Interface for Synthetic Snowflake Particle Structure and Scattering Data

The work by Kuo and colleagues on growing synthetic snowflakes and calculating their single-scattering properties has demonstrated great potential to improve the retrievals of snowfall. To grant colleagues flexible and targeted access to their large collection of sizes and shapes at fifteen (15) microwave frequencies, we have developed a web-based Application Programming Interface (API) integrated with NASA Goddard's Precipitation Processing System (PPS) Group. It is our hope that the API will enable convenient programmatic utilization of the database. To help users better understand the API's capabilities, we have developed an interactive web interface called the OpenSSP API Query Builder, which implements an intuitive system of mechanisms for selecting shapes, sizes, and frequencies to generate queries, with which the API can then extract and return data from the database. The Query Builder also allows for the specification of normalized particle size distributions by setting pertinent parameters, with which the API can also return mean geometric and scattering properties for each size bin. Additionally, the Query Builder interface enables downloading of raw scattering and particle structure data packages. This presentation will describe some of the challenges and successes associated with developing such an API. Examples of its usage will be shown both through downloading output and pulling it into a spreadsheet, as well as querying the API programmatically and working with the output in code.

reflectivity properties of snowflakes↗
NASA NTRS2004

MER SPICE Interface

MER SPICE Interface is a software module for use in conjunction with the Mars Exploration Rover (MER) mission and the SPICE software system of the Navigation and Ancillary Information Facility (NAIF) at NASA's Jet Propulsion Laboratory. (SPICE is used to acquire, record, and disseminate engineering, navigational, and other ancillary data describing circumstances under which data were acquired by spaceborne scientific instruments.) Given a Spacecraft Clock value, MER SPICE Interface extracts MER-specific data from SPICE kernels (essentially, raw data files) and calculates values for Planet Day Number, Local Solar Longitude, Local Solar Elevation, Local Solar Azimuth, and Local Solar Time (UTC). MER SPICE Interface was adapted from a subroutine, denoted m98SpiceIF written by Payam Zamani, that was intended to calculate SPICE values for the Mars Polar Lander. The main difference between MER SPICE Interface and m98SpiceIf is that MER SPICE Interface does not explicitly call CHRONOS, a time-conversion program that is part of a library of utility subprograms within SPICE. Instead, MER SPICE Interface mimics some portions of the CHRONOS code, the advantage being that it executes much faster and can efficiently be called from a pipeline of events in a parallel processing environment.

Sayfi, Elias↗
NASA NTRS2000

Radar Reflectivity of the Martian Polar Regions

Radar experiments provide a unique method of probing the surfaces and subsurfaces of planetary bodies. Information on surface and subsurface structures and properties can be extracted from radar data. There is a well developed history of radar investigations of the planet Mars, beginning with the first reports of variations of scattering properties as a function of martian longitude in the mid-1960's. Because of the rapid rotation of Mars, the standard technique of delay-doppler mapping cannot be used as effectively as it is on Mercury and Venus, making it a more difficult radar target. Techniques have been developed to overcome this difficulty, including an inversion technique to combine many doppler-only (CW) experiments from different viewing geometries into a map of surface reflectivity, and new random long-code techniques. These techniques still suffer from ambiguities, however. A third technique which does not suffer from these ambiguities is the combination of the powerful Goldstone transmitter with the VLA as the receiving instrument to create a combined radar imaging instrument. We have used this combined radar instrument to image the surface of Mars in 3.5-cm radar reflectivity during the 1988, 1992/93, and 1999 oppositions. During the 1988 experiments, the residual south polar ice cap (RSPIC) was the brightest radar reflector on the planet - intrinsically brighter than even the Tharsis lava flows. This was quite an unexpected result. In contrast, during the 1992/93 experiments, the residual north polar ice cap (RNPIC) was not nearly so bright, and in fact showed no enhancement at all, This was puzzling, given the 1988 results for the RSPIC. We attributed the lack of a radar reflection enhancement to a combination of three effects: the geometry was different; the season was different; and the intrinsic scattering from the residual ice caps was different. The 1999 experiments provided a chance to test the relative importance of these three effects, since the RNPIC would be visible in a geometry very similar to the RSPIC in 1988, and the season would also be very similar. Preliminary reduction of the data taken in 1999 shows that the RNPIC did in fact show a radar reflectivity enhancement, but that it was still not as bright as the RSPIC in 1988. Details regarding the radar reflectivity of the residual ice caps, as well as the surrounding polar layered terrains (in light of our radar reflectivity data) will be discussed. Additional information is contained in the original extended abstract.

Butler, B. J.↗