Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CUBE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Magnetic coercivity and ferromagnetic species in lunar materials

Lunar samples have reduced coercive force, high values of R sub H (ratio of remanent coercive force to coercive force), and constriction in their magnetic hysteresis loops due to the presence of superparamagnetic and multidomain iron grains. The high R sub H values are also attributable to the magnetic shape effects of the iron grains. Spheres, cubes, and needles, as well as more irregular metal grains were observed. The coercive force values are quite meaningless unless the size and shape distributions are determined. The R sub H and the ratio of saturation remanence to saturation magnetization values can be considered characteristic of the size and shape modes of the ferromagnetic grains in a natural sample, and a classification of natural materials based on their hysteresis characteristics is presented with special reference to lunar samples.

Wasilewski, P.↗
NASA NTRS1971

Jones's matrix representation of optical instruments. II - Fourier interferometers /spectrometers and spectropolarimeters/.

Our method of matrix synthesis of optical components and instruments is applied to the derivation of Jones's matrices appropriate for Fourier interferometers (spectrometers and spectropolarimeters). These matrices are obtained for both the source beam and the detector beam. In the course of synthesis, Jones's matrices of the various reflectors (plane mirrors; retroreflectors: roofed mirror, trihedral and prism cube corner, cat's eye) used by these interferometers are also obtained.

Fymat, A. L.↗
NASA NTRS1972

Waveguide excited dielectric spheres as feeds.

The results of experiments with dielectric obstacles of various geometries placed directly upon the apertures of circular and rectangular waveguides are presented. It is found that dielectric spheres, and in some instances dielectric cubes, two to four wavelengths in dimension produce directive patterns with low sidelobe levels. For some cross sections, the measured gain of these antennas is greater (6 dB in some cases) than that produced by optimum horns having apertures of identical cross section. The linearity of the polarization of these antennas is essentially the same as that of an open-end waveguide antenna.

Chatterjee, J. S.↗
NASA NTRS1972

Dielectric loaded aperture antennas.

This paper describes a primarily experimental study of the effect of placing dielectric obstacles having various geometries directly upon the aperture of circular and rectangular waveguide antennas. It is found that plexiglas spheres, and in some cases plexiglas cubes, one to four wavelengths in dimension, produce directive patterns with low sidelobes. The measured gain in some cases is 6 dB greater than the gain of an optimum horn having an equal aperture size.

Croswell, W. F.↗
NASA NTRS1972

Atmospheric radar sounding

Monostatic and bistatic radar techniques for the measurement of the structure of volume targets in the troposphere and lower stratosphere are reviewed. The targets considered are thin turbulent layers in the lower stratosphere and rain in the troposphere. The measurements of scattering from thin turbulent layers show that layers are generally detected at or near the tropopause, and in 31 out of 34 sets of measurements, layers were detected above the tropopause in the lower 10 km of the stratosphere. The threshold for turbulent layer detection corresponds to an equivalent thickness product of ten to the minus 13th power times the cube root of m at a range of 100 km and for layers with less than 1000 m thickness. The measurement of scattering by rain shows that in the New England area both convective and widespread rain consists of a number of small cells. On average, the cells appear to have a half-intensity width of 3 to 4 km as measured with a radar system with a 1.8 km resolution cell size for cells at 100 km range.

Crane, R. K.↗
NASA NTRS1973

A solution of the geodetic boundary value problem to order e3

A solution is obtained for the geodetic boundary value problem which defines height anomalies to + or - 5 cm, if the earth were rigid. The solution takes into account the existence of the earth's topography, together with its ellipsoidal shape and atmosphere. A relation is also established between the commonly used solution of Stokes and a development correct to order e cubed. The data requirements call for a complete definition of gravity anomalies at the surface of the earth and a knowledge of elevation characteristics at all points exterior to the geoid. In addition, spherical harmonic representations must be based on geocentric rather than geodetic latitudes.

Mather, R. S.↗
NASA NTRS1973

Nonlinear evolution of a disturbance in an unbounded viscous fluid with uniform shear

The evolution of a disturbance in the presence of a uniform mean velocity gradient is calculated by a power-series solution of the incompressible Navier-Stokes equations. Terms through those in time cubed are retained in the solution. For the initial condition a three-dimensional cosine distribution with two harmonic terms is assumed. The nonlinear interaction of these harmonic terms produces new harmonics which in turn interact. For large velocity gradients the energy of the disturbance can grow with time. The results shed some light on the maintenance or growth of turbulence in a shear flow.

Deissler, R. G.↗
NASA NTRS1973

Position from gravity

Procedures for obtaining position from surface gravity observations are reviewed and their relevance assessed in the context of the application of modern geodetic techniques to programs of Earth and ocean physics. Solutions based on the use of surface layer techniques, the discrete value approach, and the development from Green's theorem are stated in summary, the latter being extended to order e cubed in the height anomaly. The representation of the surface gravity field which is required in order that this accuracy may be achieved is discussed. Interim techniques which could be used in the absence of such a representation are also outlined.

Mather, R. S.↗
NASA NTRS1972

Thermal conductivity of Apollo 14 fines.

The thermal conductivity of the Apollo 14 fines, sample 14163,133, was measured under vacuum conditions as a function of temperature. Measurements were made for densities of 1100 and 1300 kg/cu m. A least-squares curve of the form k = A + B(T-cubed) is fitted to each data set in accordance with elementary theory. Comparisons are made with previously published data for terrestrial basalt and Apollo 11 and 12 samples.

Cremers, C. J.↗
NASA NTRS1973

Nonlinear gas oscillations in pipes. I - Theory.

The problem of forced acoustic oscillations in a pipe is studied theoretically. The oscillations are produced by a moving piston in one end of the pipe, while a variety of boundary conditions ranging from a completely closed to a completely open mouth at the other end are considered. The linear theory predicts large amplitudes near resonance and that nonlinear effects become crucially important. By expanding the equations of motion in a series in the Mach number, both the amplitude and waveform of the oscillation are predicted there. In both the open- and closed-end cases the need for shock waves in some range of parameters is found. The amplitude of the oscillation is different for the two cases, however, being proportional to the square root of the piston amplitude in the closed-end case and to the cube root for the open end.

Jimenez, J.↗
NASA NTRS1973

Development of ductile high-strength chromium alloys, phase 2

Strength and ductility were evaluated for chromium alloys dispersion hardened with the putative TaC, TaB, CbC, and CbB compounds. TaC and TaB proved to be the most potent strengtheners, but when combined, their effect far outweighed that produced individually. Tests at 1422 K (2100 F) on an alloy containing these two compounds at the combined level of 0.5 m/o revealed a 495 MN/sq m (70 ksi) tensile strength for wrought material, and a 100 hour rupture strength of 208 MN/sq m (30 ksi) when solution annealed and aged to maximize creep resistance. These levels of high temperature strength greatly exceed that reported for any other chromium-base alloy. The ductile-to-brittle transition temperature (DBTT) of the two phase strengthened alloy occurred at approximately 588 K (600 F) when heat treated to optimize creep strength and was not improved by fabrication to produce a wrought and recovered microstructure. The lowest DBTT measured on any of the alloys investigated was 422 K (300 F). Strengthening phases actually formed in Cr-Ta-B and Cr-Cb-B compositions are probable M2CrB2 (M=Ta or Cb) compounds of tetragonal crystal structure. The likely habit relationship between these compounds and chromium is postulated. Cube habit coherency was identified for TaC precipitation in chromium by electron microscopy. In another study, the maximum solubility of carbon in chromium was indicated to lie between 3/4 and 1 a/o and that of boron to be 1/2 a/o.

Filippi, A. M.↗
NASA NTRS1973

Wind power research at Oregon State University

There have been two primary thrusts of the research effort to date, along with several supplementary ones. One primary area has been an investigation of the wind fields along coastal areas of the Pacific Northwest, not only at the shoreline but also for a number of miles inland and offshore as well. Estimates have been made of the influence of the wind turbulence as measured at coastal sites in modifying the predicted dependence of power generated on the cube of the wind speed. Wind flow patterns in the Columbia River valley have also been studied. The second primary thrust has been to substantially modify and improve an existing wind tunnel to permit the build up of a boundary layer in which various model studies will be conducted. One of the secondary studies involved estimating the cost of building an aerogenerator.

Hewson, E. W.↗
NASA NTRS1974

Thermophysical properties of Apollo 14 fines

The vacuum thermal conductivity of lunar fines sample 14163 was measured for the approximate temperature range of 100 to 400 K. Sample densities of 1500 kg/cu m and 1800 kg/cu m were used. The temperature dependence of the conductivity was found to be well represented by the relation k = A + BT-cubed, which is predicted by elementary theory. The coefficients A and B were obtained by least-squares analysis of the data. The thermal diffusivity was calculated for the various densities using specific heat data from the literature along with the measured conductivities. The results are compared with those obtained for Apollo 11, Apollo 12, and terrestrial basalt samples.

Cremers, C. J.↗
NASA NTRS1974

Thermodynamic properties derived from the free volume model of liquids

An equation of state and expressions for the isothermal compressibility, thermal expansion coefficient, heat capacity, and entropy of liquids have been derived from the free volume model partition function suggested by Turnbull. The simple definition of the free volume is used, and it is assumed that the specific volume is directly related to the cube of the intermolecular separation by a proportionality factor which is found to be a function of temperature and pressure as well as specific volume. When values of the proportionality factor are calculated from experimental data for real liquids, it is found to be approximately constant over ranges of temperature and pressure which correspond to the dense liquid phase. This result provides a single-parameter method for calculating dense liquid thermodynamic properties and is consistent with the fact that the free volume model is designed to describe liquids near the solidification point.

Miller, R. I.↗
NASA NTRS1974

Multiple target tracking and target attitude determination with a scanning laser radar

A scanning laser radar that can acquire and track single or multiple targets has recently been developed. Scan patterns have been designed for acquisition and tracking of one or more targets using a narrow laser beam. A synchronously scanned transmitter-receiver is used to acquire and track targets anywhere in a 376 x 376 element raster covering a 30 x 30 deg field. All scan patterns are electronically programmed, and the system automatically acquires and tracks the target or targets without the aid of an operator. The maximum tracking rate is 1.0 deg/sec (10.0 deg/sec) when used with a 1 kHz (10 kHz) scan rate. The estimated free space range against passive cooperative targets (corner cube reflectors) is 30 nautical miles. The laser radar has an accuracy of 10 cm (range) and 0.05 deg (angle). The developmental system is relatively small (1.5 cu ft), lightweight (60 lbs) and low-power-consuming (60 W).

Flom, T.↗
NASA NTRS1974

The planetary magnetic field and magnetosphere of Jupiter - Pioneer 10

Data obtained by the Pioneer 10 vector helium magnetometer are presented along with models of the intrinsic magnetic field of Jupiter and its magnetosphere. Data acquired between 2.84 and 6.0 Jupiter radii, where the intensity of the planetary field ranged between 1900 and 18,400 gamma, were used to develop a six-parameter eccentric dipole model of the field. The dipole so derived has a moment of 4.0 G (R sub J) cubed and a tilt angle with respect to Jupiter's rotation axis of 11 deg. A model of the Jovian magnetosphere is presented in which the essential feature is an eastward current sheet that forms an annulus with Jupiter at the center. At large distances from the planet the current sheet is nearly parallel to Jupiter's equator but, in general, does not lie in it. The current sheet is warped, so that it is above the equator on one side and below it on the other. The current sheet rotates with the planet, more or less like a rigid body, this behavior causes an apparent up and down motion and periodic crossings of the current sheet by Pioneer.

Smith, E. J.↗
NASA NTRS1974

A new model for the high-frequency decametric radiation from Jupiter

It is generally accepted that the Jupiter decametric noise bursts occur at frequencies directly related to the electron gyrofrequencies in the Jupiter ionosphere, and it is frequently suggested that the radiation occurs at the gyrofrequency. The recent Pioneer 10 measurement of a 4-G-(R sub 5) cubed dipole moment provides some basis for a more detailed analysis of the local wave mode involved in the radiation. The direct measurement of a relatively small planetary dipole moment suggests that phenomena associated with local ionospheric wave modes having frequencies higher than local gyrofrequencies should be considered for at least some of the emissions. A possible explanation for certain intense high-frequency Jupiter noise bursts is discussed which is based on a wave-wave coupling mechanism that involves the radiation field and the (n + 1/2) gyrofrequency electrostatic modes.

Scarf, F. L.↗
NASA NTRS1975

Visual alignment aid

Device consists of beam-splitter cube and two 90 deg prisms cemented together. Various components can be made as two pieces, eliminating seams, except beam-splitter diagonal.

Franke, J. M.↗