Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CO 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Sorbent Mediated Electrocatalytic Reduction of Dilute CO 2 to Methane

Efficient CO 2 utilization is a critical component of closing the anthropogenic carbon cycle. Most studies have focused on the use of pure streams of CO 2 . However, CO 2 is generally available only in dilute streams, which requires capture by sorbents followed by energy-intensive regeneration to release concentrated CO 2 . Direct utilization of sorbed-CO 2 avoids the costly regeneration step, and the sorbent-CO 2 interaction can kinetically activate CO 2 to tune its reactivity toward products that could otherwise be inaccessible with direct CO 2 reduction. We demonstrate that an N-heterocyclic carbene, 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene (DPIy), quantitatively reacts with CO 2 from dilute streams (0.04 and 10%) to form the sorbent-CO 2 substrate 1,3-bis(2,6-diisopropylphenyl)imidazolium-2-carboxylate (DPICx). Electrocatalyst iron tetraphenylporphyrin chloride (Fe(TPP)Cl) typically reduces CO 2 to CO; however, with DPICx as the substrate, the eight-electron reduced product methane (CH 4 ) is produced with a high Faradaic efficiency (>85%) and regeneration of the sorbent DPIy. In addition to the overall energy and capital advantages of integrated CO 2 capture and conversion, this result illustrates how sorbents can serve a dual purpose for both CO 2 capture and chemical auxiliary purposes to access unique products. CO 2 has a spectrum of reactivity with different types of sorbents; thus, these studies demonstrate how sorbent-CO 2 interactions can be leveraged for integrated capture and utilization platforms to access a wider range of CO 2 -derived products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electrochemical Conversion of CO 2 to Methyl Formate in a Flow Electrolyzer with Mixed Propylene Carbonate/Methanol Catholyte

Despite the promise of electrochemical carbon dioxide reduction as a technology for the production of clean fuels and decarbonization of the chemical industry, research has mostly focused on aqueous systems with a relatively limited set of products that have been achieved via electrosynthesis. Increasingly, CO 2 electroreduction in nonaqueous solvents is being pursued to develop new avenues for expanding the suite of products that can be made with high selectivity. CO 2 reduction in alcohols coupled with in situ esterification to produce esters is one such route that utilizes nonaqueous electrolyte. To be practical, such electrochemical syntheses need to be translated to a high-performance reactor such as a flow electrolyzer. However, many organic solvents, such as alcohols, wet and flood porous electrodes, thus impeding reactor performance. In this work, methanol was mixed with propylene carbonate as a catholyte for a gas-fed CO 2 flow electrolyzer that avoided cathode flooding. Simultaneously, a dual aqueous anolyte was used for water oxidation as a scalable and sustainable anodic half-reaction. The performance effect of methanol concentration, catholyte acidity, CO 2 flow rate, and dilute water in the catholyte were investigated. With 10 vol % methanol in 90 vol % propylene carbonate, 63% faradaic efficiency for methyl formate ester product was sustained without cathode flooding. However, improvements are still needed to lower the cell resistance and further increase the operating current density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding Mechanistic Controls of Heterotrophic CO 2 and CH 4 Fluxes in a Peatland with Deep Soil Warming and Atmospheric CO 2 Enrichment

This project was funded from August 1, 2016 – July 31, 2019 with a no-cost extension until July 31, 2020 (and built upon the PI-team’s previous work supported by DE-SC0008092 (June 2012 – September 2016)). Our project focused on the Spruce and Peatland Responses Under Changing Environments (SPRUCE: https://mnspruce.ornl.gov/) experiment taking place in the S1 Bog in the Marcell Experimental Forest in northern Minnesota, USA. The SPRUCE project is a unique whole-ecosystem experiment where a bog peatland is subjected to warming and atmospheric carbon dioxide (CO 2 ) enrichment. Deep peat heating of the soil profile (to a depth of at least 2 m) began in June of 2014 and was followed by whole-ecosystem warming in August of 2015. Warming treatments included +0 °C, +2.25 °C, +4.5 °C, +6.75 °C, and +9 °C above ambient temperatures, with 2 experimental chambers for each warming treatment. Half of these chambers received ambient atmospheric CO 2 concentrations, and starting in June of 2016, the other half received elevated atmospheric CO 2 concentrations (~ +500 ppm(v) above ambient). Our primary goal with this project was to explore the mechanistic controls of anaerobic carbon cycling – especially the dynamics of the potent greenhouse gas methane (CH 4 ) – within the SPRUCE experiment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Understanding the morphology and chemical activity of model ZrO x /Au (111) catalysts for CO 2 hydrogenation

In this study, the growth of ZrO x on Au (111) was investigated using scanning tunneling microscopy (STM) and synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS). Nanostructures of ZrO x (x= 1,2) at the sub-monolayer (≤ 0.3 ML) level were prepared by vapor depositing Zr metal onto Au (111) followed by oxidation with O 2 or CO 2 . At low coverages of the admetal (< 0.05 ML), the formed ZrO x nanostructures were dispersed randomly on the terraces and steps of the Au(111) substrate. Strong oxide-metal interactions prevented the formation of islands of zirconia. The ZrO x nanostructures displayed a reactivity towards CO 2 and H 2 not seen for bulk zirconia. C 1 s AP-XPS results indicated that CO 2 molecules adsorbed on Zr/ZrO x /Au(111) surfaces could undergo partial decomposition on Zr (CO 2 , gas → CO gas + O ads ), or react with oxygen sites from ZrO x to yield carbonates (Zr-CO 3, ads ). Further, after exposing ZrO 2 /Au (111) surfaces to 1:3 mixtures of CO 2 :H 2 , the formation of HCOO, CO 3 , and CH 3 O was detected in AP-XP spectra. These chemical species decomposed at temperatures in the range of 400-600 K, making them possible reaction intermediates for methanol synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

(Invited) Virtual Analysis of Gas-Diffusion-Electrode CO 2 Electrolyzers

The electrochemical reduction of CO 2 (CO 2 R) to value-added products is an attractive technology for tackling the rising atmospheric CO 2 levels and storing intermittent renewable energy into chemical bonds. Fundamental understanding of CO 2 R has progressed significantly in recent years and is critical in the development of CO 2 R to liquid-fuel electrolyzers, where gas-diffusion electrodes (GDEs) have been shown to be key enabling architectures. Various designs have been proposed and studied in the literature to enhance overall selectivity, rates, and maximize the conversion of CO 2 , the latter of which is only now being recognized as a critical issue. In this respect, there is a need to explore the governing phenomena inherent in these architectures to enable optimization. Mathematical modeling is ideally suited to tackle and explore these multiphysics interactions and provide virtual design analysis. In this talk, we discuss modeling methodologies and physics inherent in these devices and present our recent modeling of GDEs for CO 2 reduction. We specifically examine the impacts of multiphase flow and related phenomena on overall cell performance. We then explore the performance and limitations of various cell designs guided by simulation results and examine potential methods for improving water management and tuning catalyst selectivity including the use of different anion-exchange and bipolar membranes. Finally, we discuss the disparities in local environments between aqueous and GDE devices and propose strategies to reduce the gap in knowledge between the two systems.

42 ENGINEERING↗
DOE OSTI2022

Effect of Composition and Local Environment on CO 2 Adsorption on Nickel and Magnesium Oxide Solid Solutions

CO 2 adsorption energies on the (100) surfaces of a nickel oxide doped with Mg, magnesium oxide doped with Ni, and their 50:50 solid solution were calculated using density functional theory. The composition and atomic arrangement of the adsorption site was varied to understand how the local environment affects CO 2 adsorption and the basicity of the surfaces at the atomic level. The dispersive and electronic contributions to the adsorption energies were quantified, and the results indicate that the variation of the adsorption energy with adsorption site configuration and metal composition is dominated by electronic interactions. Interestingly, for magnesium oxide doped with nickel, a single substitution can create stronger CO 2 binding sites, which implies stronger basic sites, even though nickel oxide is less basic than magnesium oxide. The effect of double substitution at the binding site can be reasonably approximated by summing the effects of single substitutions. Furthermore, this work provides guidance for the preparation of metal oxides with tailored Lewis basicity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Pulsed Electrolysis Promotes Catalyst Activity in Dilute CO 2 Streams

Industrial CO 2 streams vary widely in composition, from pure to as low as 3%, posing challenges for purification or direct conversion. Electrochemical reduction offers a route for converting dilute CO 2 streams but faces severe mass transport limitations. This study demonstrates that pulsed electrolysis effectively overcomes these limitations, enhancing CO 2 electroreduction across variable feed compositions and current densities, particularly at low CO 2 concentrations and high current densities. At 25% CO 2 and 400 mA cm −2 , pulsing improved selectivity from 25.6 to 78.6%, production rate from 13.7 to 21.0 mol m −2 h −1 , and energy productivity from 0.77 to 2.59 mol kWh −1 . A dynamic, multiphysics continuum model confirms a 64% increase in CO 2 concentration within the catalyst layer during pulsing, resolving the transient chemical microenvironment. These findings establish pulsed electrolysis as a viable strategy for converting dilute industrial CO 2 streams into valuable feedstocks, bypassing costly pre-separation.

Orfali, Dania Muhieddine [New York University (NYU↗
DOE OSTI2021

High-temperature high-pressure microfluidic system for rapid screening of supercritical CO 2 foaming agents

CO 2 foam helps to increase the viscosity of CO 2 flood fluid and thus improve the process efficiency of the anthropogenic greenhouse gas’s subsurface utilization and sequestration. Successful CO 2 foam formation mandates the development of high-performance chemicals at close to reservoir conditions, which in turn requires extensive laboratory tests and evaluations. This work demonstrates the utilization of a microfluidic reservoir analogue for rapid evaluation and screening of commercial surfactants (i.e., Cocamidopropyl Hydroxysultaine, Lauramidopropyl Betaine, Tallow Amine Ethoxylate, N,N,N' Trimethyl-N'-Tallow-1,3-diaminopropane, and Sodium Alpha Olefin Sulfonate) based on their performance to produce supercritical CO 2 foam at high salinity, temperature, and pressure conditions. The microfluidic analogue was designed to represent the pore sizes of the geologic reservoir rock and to operate at 100 °C and 13.8 MPa. Values of the pressure drop across the microfluidic analogue during flow of the CO 2 foam through its pore network was used to evaluate the strength of the generated foam and utilized only milliliters of liquid. The transparent microfluidic pore network allows in-situ quantitative visualization of CO 2 foam to calculate its half-life under static conditions while observing if there is any damage to the pore network due to precipitation and blockage. The microfluidic mobility reduction results agree with those of foam loop rheometer measurements, however, the microfluidic approach provided more accurate foam stability data to differentiate the foaming agent as compared with conventional balk testing. The results obtained here supports the utility of microfluidic systems for rapid screening of chemicals for carbon sequestration or enhanced oil recovery operations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Discovery of a Hybrid System for Photocatalytic CO 2 Reduction via Attachment of a Molecular Cobalt-Quaterpyridine Complex to a Crystalline Carbon Nitride

While recent reports have demonstrated the attachment of molecular catalysts to amorphous, graphitic carbon nitrides (g-CN) for light-driven CO 2 reduction, approaches to the utilization of crystalline carbon nitrides have remained undiscovered. Herein, a functional hybrid photocatalyst system has been found using a crystalline carbon nitride semiconductor, poly(triazine imide) lithium chloride (PTI-LiCl), with a surface-attached CoCl 2 (qpy-Ph-COOH) catalyst for CO 2 reduction. The molecular catalyst attaches to PTI-LiCl at concentrations from 0.10 to 4.30 wt % and exhibits ∼96% selectivity for CO production in a CO 2 -saturated, aqueous 0.5 M KHCO 3 solution. Optimal loadings were found to be within 0.42–1.04 wt % with rates between 1,400 and 1,550 μmol CO/g·h at an irradiance of 172 mW/cm 2 (λ = 390 nm) and apparent quantum yields of ∼2%. This optimized loading is postulated to represent a balance between maximal turnover frequency (TOF; 300+ h –1 ) and excess catalyst that can limit excited-electron lifetimes, as probed via transient absorption spectroscopy. An increase in the incident irradiance yields a concomitant increase in the TOFs and CO rates only for the higher catalyst loadings, reaching up to 2,149 μmol CO/g·h with a more efficient use of the catalyst surface capacity. The lower catalyst loadings, by comparison, already function at maximal TOFs. Higher surface loadings are also found to help mitigate deactivation of the molecular catalysts during extended catalytic testing (>24 h) owing to the greater net surface capacity for CO 2 reduction, thus representing an effective strategy to extend lifetime. The hybrid particles can be deposited onto an FTO substrate to yield ∼60% Faradaic efficiency for photoelectrochemical CO production at −1.2 V vs Ag/AgCl bias. In conclusion, these results demonstrate the synergistic combination of a crystalline carbon nitride with a molecular catalyst that achieves among the highest known rates in carbon-nitride systems for the light-driven CO 2 reduction to CO in aqueous solution with >95% selectivity.

CO2 reduction↗
DOE OSTI2024

Proton-Coupled Electron Transfer Mechanisms for CO 2 Reduction to Methanol Catalyzed by Surface-Immobilized Cobalt Phthalocyanine

Immobilized cobalt phthalocyanine (CoPc) is a highly promising architecture for the six-proton, six-electron reduction of CO 2 to methanol. This electroreduction process relies on proton-coupled electron transfer (PCET) reactions that can occur by sequential or concerted mechanisms. Immobilization on a conductive support such as carbon nanotubes or graphitic flakes can fundamentally alter the PCET mechanisms. We use density functional theory (DFT) calculations of CoPc adsorbed on an explicit graphitic surface model to investigate intermediates in the electroreduction of CO 2 to methanol. Our calculations show that the alignment of the CoPc and graphitic electronic states influences the reductive chemistry. These calculations also distinguish between charging the graphitic surface and reducing the CoPc and adsorbed intermediates as electrons are added to the system. This analysis allows us to identify the chemical transformations that are likely to be concerted PCET, defined for these systems as the mechanism in which protonation of a CO 2 reduction intermediate is accompanied by electron abstraction from the graphitic surface to the adsorbate without thermodynamically stable intermediates. Furthermore, this work establishes a mechanistic pathway for methanol production that is consistent with experimental observations and provides fundamental insight into how immobilization of the CoPc impacts its CO 2 reduction chemistry.

Adsorption↗
DOE OSTI2025

An Interfacial Engineering Approach toward Operation of a Porous Solid Electrolyte CO 2 Electrolyzer

Waste CO 2 can be repurposed as a carbon feedstock for synthesizing valuable chemicals via CO 2 electrolysis. Porous solid electrolyte (PSE) CO 2 electrolysis has been demonstrated as an economically viable method to produce high purity products. This work applies an interfacial engineering approach to determine key factors to improve performance in PSE CO 2 electrolyzers. We standardize the assembly by binding the ionic resin into an ionomer wafer and utilize Computational Fluid Dynamics (CFD) to design gaskets for uniform fluid flow. Here, we employ the distribution of relaxation times (DRT) method to determine that anionic-conducting interfaces are the primary contributor to energy losses. To address this, we demonstrate that enhancing the contact between the cathode and the anion exchange membrane (AEM) and the AEM-ionic resin interface allows for low overpotential in deionized water operation.

09 BIOMASS FUELS↗
DOE OSTI2025

Sr 2 MnO 4 as a reactive CO 2 sorbent for sorption-enhanced steam reforming of biogas to green hydrogen

Sorption-enhanced steam biogas reforming is an attractive approach for hydrogen production from renewable resources, with the performance of the CO 2 sorbents being a critical factor. In this study, Sr 2 MnO 4 was investigated as a redox-activated CO 2 sorbent for sustainable hydrogen production from biogas. The Sr 2 MnO 4 sorbents exhibited a CO 2 sorption capacity of over 26 g per 100 g of sorbents, along with excellent cyclic stability in thermogravimetric analysis. Complete regeneration of the sorbent was achieved with a relatively small temperature swing (100 °C). Fixed-bed reactor experiments further demonstrated the application of Sr 2 MnO 4 sorbents in sorption-enhanced steam biogas reforming. Biogas simulants with varying CO 2 contents were converted to ~94 vol% H 2 before CO 2 breakthrough. Stable CO 2 capacity and hydrogen production were maintained over 20 cycles. In addition, optimization of the regeneration duration enabled the generation of highly pure CO 2 and more efficient use of O 2 . These results support the feasibility of biogas-to‑hydrogen conversion with net-negative carbon emissions through integration with CO 2 capture and sequestration.

09 BIOMASS FUELS↗
DOE OSTI2023

Encapsulation of Nanoparticle Organic Hybrid Materials within Electrospun Hydrophobic Polymer/Ceramic Fibers for Enhanced CO 2 Capture

Liquid-like nanoparticle organic hybrid materials (NOHMs) consisting of a silica core with ionically grafted branched polyethyleneimine chains (referred to as NIPEI) are encapsulated within submicron-scale polyacrylonitrile (PAN)/polymer-derived-ceramic electrospun fibers. The addition of a room-temperature curable, liquid-phase organopolysilazane (OPSZ) ceramic precursor to the PAN/NOHM solution enhances the internal dispersion of NOHMs and forms a thin ceramic sheath layer on the fiber exterior, shielding the hydrophilic NIPEI to produce near-superhydrophobic non-woven fiber mats with contact angles exceeding 140°. 60:40 loadings of NOHMs to PAN/OPSZ can be reliably achieved with low OPSZ percentages required, and up to 4:1 NOHM:polymer loadings are possible before losing hydrophobicity. These fibers demonstrate up to ≈2 mmol CO 2 g -1 fiber capture capacities in a pure CO 2 atmosphere through the nonwoven fibrous networks and the permeability of the OPSZ shell. In conclusion, the hybrid fibers additionally show enhanced capture kinetics under pure CO 2 and 400 ppm CO 2 conditions, indicating their promising application as a direct air capture platform.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Stabilizing Ru-Formyl CO 2 Reduction Intermediates by Formation of Lewis Acid–Base Adducts: A Combined 2DIR and NMR Study

This work demonstrates how the stability of a Ru(II) formyl complex (cis-[Ru(bpy) 2 (CO)(CHO)][PF 6 ]), which is known to decarbonylate to form the metal hydride complex, is greatly enhanced by the addition of a Lewis acidic cation (Li + or Mg 2+ ). Multinuclear NMR is used to measure equilibrium constants of adduct formation, and then ultrafast 2DIR spectroscopy is applied to determine how the electronic structure and local molecular dynamics change upon complexation of the formyl ligand with the Lewis acid. We attribute the stabilization of the complex to the formation of a carbene-like structure where the bond strength between the Ru and the formyl group increases. The change in electronic structure is evidenced by steady-state NMR spectroscopy and DFT calculations. 2DIR measurements further confirm both the complexation of the formyl ligand with the Lewis acid and the change in electronic structure, where changes in vibrational frequency, relaxation kinetics, and a slowdown in the time scale of rotation about the metal-formyl bond are observed in the presence of Lewis acids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Hydride Accessibility and Reactivity in the Configurational and Stoichiometric Space of β-Ga 2 O 3 for CO 2 Hydrogenation

Understanding how surface species evolve under reaction conditions is essential for improving catalyst design for efficient CO 2 hydrogenation. This work combines systematic DFT calculations with grand canonical sampling to investigate the stability and reactivity of Ga–H species on β-Ga 2 O 3 across a range of reaction conditions. Initial DFT studies reveal that when Ga–H species are present, they facilitate formate formation via a low-barrier pathway, largely independent of the surface termination or hydrogen site. However, grand canonical sampling shows that under a broad range of reaction conditions─especially at high oxygen chemical potentials associated with high water content─Ga–H species are thermodynamically inaccessible. Furthermore, adsorbed water molecules can block reactive sites, inhibiting CO 2 activation even when hydrides are present. These findings suggest that the lack of accessible hydride species, rather than their intrinsic reactivity, could contribute to reduced catalytic performance of β-Ga 2 O 3 under more oxidizing, high-conversion conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

CO 2 Hydrogenation: Na Doping Promotes CO and Hydrocarbon Formation over Ru/m-ZrO 2 at Elevated Pressures in Gas Phase Media

Sodium-promoted monoclinic zirconia supported ruthenium catalysts were tested for CO 2 hydrogenation at 20 bar and a H 2 :CO 2 ratio of 3:1. Although increasing sodium promotion, from 2.5% to 5% by weight, slightly decreased CO 2 conversion (14% to 10%), it doubled the selectivity to both CO (~36% to ~71%) and chain growth products (~4% to ~8%) remarkably and reduced the methane selectivity by two-thirds (~60% to ~21%). For CO 2 hydrogenation during in situ DRIFTS under atmospheric pressure, it was revealed that Na increases the catalyst basicity and suppresses the reactivity of Ru sites. Higher basicity facilitates CO 2 adsorption, weakens the C–H bond of the formate intermediate promoting CO formation, and inhibits methanation occurring on ruthenium nanoparticle surfaces. The suppression of excessive hydrogenation increases the chain growth probability. Decelerated reduction during H 2 -TPR/TPR-MS and H 2 -TPR-EXAFS/XANES at the K-edge of ruthenium indicates that sodium is in contact with ruthenium. A comparison of the XANES spectra of unpromoted and Na-promoted catalysts after H 2 reduction showed no evidence of a promoting effect involving electron charge transfer.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effect of the Molecular Structure of Surface Vanadia on Activity and Regenerability of VO $x$ /In 2 O 3 Catalysts for CO 2 -Assisted Oxidative Dehydrogenation of Propane

Our recent work has reported that higher propylene selectivity and improved stability can be achieved by combining redox-active VO $x$ and basic In 2 O 3 for CO 2 -assisted oxidative dehydrogenation of propane (CO 2 -ODHP). In the present work, we continued to explore the stability and regenerability of V/In catalysts. In particular, our interest lies in identifying the effect of mono- and polyvanadate on catalytic performance and regenerability. A V/In catalyst with an increased proportion of monovanadate was prepared using the Schlenk line under moisture-free conditions (V/In–S), while the fully polymerized vanadate catalyst was prepared through a regular impregnation (V/In) for comparison. The Schlenk-line-prepared catalyst, namely, V/In–S, not only exhibits a 17–30% enhanced propylene yield at high temperatures (500–540 °C) over V/In but also presents improved stability and regenerability with nearly 88% activity recovered after regeneration in O 2 . Detailed characterizations have been performed to reveal the catalyst structure–performance relationship, including chemisorption (NH 3 /CO 2 -temperature-programmed desorption, NH 3 /CO 2 -TPD), H 2 -temperature-programmed reduction (H 2 -TPR), and spectroscopic studies [Raman spectroscopy, UV–vis diffuse reflectance spectroscopy (UV–vis DRS), near-ambient-pressure X-ray photoelectron spectroscopy (NAP-XPS), and high-sensitivity low-energy ion scattering (HS-LEIS)]. Characterization results demonstrate that compared with polyvanadates, monovanadates lead to strengthened interaction with In 2 O 3 and a more stabilized V/In surface and subsurface, as well as improved redox properties of VO $x$ . These advantages give rise to the observed enhancement in activity, stability, and regenerability. In conclusion, these findings advance the understanding of the relationship between the activity/stability and the molecular structure of surface oxide species (vanadia) and the interplay between acid–base interactions and redox properties of mixed metal-oxide catalysts for efficient CO 2 -ODHP.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Southeast Regional CO 2 Utilization and Storage Acceleration Partnership (SECARB-USA): A Sub-Basin Framework for Future CO 2 Infrastructure Development (Task 4.1.a)

The “Southeast Regional CO 2 Utilization and Storage Acceleration Partnership” (SECARB-USA) project supports the U.S. Department of Energy (DOE) Office of Fossil Energy's (FE) mission to help the United States meet its need for secure, affordable, and environmentally sound fossil energy supplies by utilizing the advancements made since 2003 by the Regional Carbon Sequestration Partnership (RCSP) Initiative to continue to identify and address knowledge gaps. The SECARB-USA regional initiative encompasses the states of Alabama, Arkansas, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina, Tennessee, Virginia, and portions of Kentucky, Missouri, Oklahoma, Texas, and West Virginia as noted in Figure 1.1. The primary objective of the project is to identify and address regional onshore storage and transport challenges facing commercial deployment of carbon dioxide (CO 2 ) capture, utilization, and storage (CCUS) technologies.

42 ENGINEERING↗