Stresses in a thick plate with axially symmetric loading.
Normal stress distribution on thick elastic plate with axially symmetric circular pressure loading
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Normal stress distribution on thick elastic plate with axially symmetric circular pressure loading
An open source numerical wave tank based on the OpenFOAM® software was setup and tested to solve the Navier-Stokes equations. This work focused on submerged plates because of their simple geometry, their importance as a design component (e.g., heave plates), and the broad availability of published experimental results. Two-dimensional plates in an oscillatory flow, as well as three-dimensional circular disks and square plates undergoing forced oscillations were simulated in conditions where the nonlinearity of hydrodynamic viscous drag and inertia forces can be probed easily. The effect of plate thickness as well as the ability of the numerical simulations to predict wave radiation damping at shallow plate submergence were also considered. Overall, force coefficient predictions were very satisfactory when compared to experimental data, and generally exhibited less scatter. Here, the influence of both Keulegan-Carpenter number and frequency parameter on the hydrodynamic force could be assessed as well from these numerical simulations as from past laboratory experiments.
An approximate analysis for buckling of a rectangular specially-orthotropic plate with a central circular hole is applied to symmetrically-laminated angle-ply plates. Results obtained from finite element analyses and experiments indicate that the approximate analysis predicts accurately the buckling loads of (+/-theta sub m)s plates with integer values of m not below 6 and with hole diameters up to 50 percent of the plate width. Moreover, the results indicate that the approximate analysis can be used to predict the buckling trends of plates with hole diameters up to 70 percent of the plate width. Results of a parametric study indicate the influence of hole size, plate aspect ratio, loading conditions, boundary conditions, and orthotropy on the buckling load. Results are also presented that indicate the relationship of the bending stiffness and the prebuckling load distribution to the buckling load of a plate with a hole.
Recent development in composites containing phase-transforming particles, such as vanadium dioxide or barium titanate, reveals the overall stiffness and viscoelastic damping of the composites may be unbounded. Negative stiffness is induced from phase transformation predicted by the Landau phase transformation theory. Although this unbounded phenomenon is theoretically supported with the composite homogenization theory, detailed stress analyses of the composites are still lacking. In this work, we analyze the two-dimensional plane stress elasticity problem of a square plate containing a circular inclusion, under the assumption that the Young's modulus of the inclusion is negative. Assumption of negative stiffness is a priori in the present analysis. A static loading condition is adopted to estimate the effective modulus of the composites by the ratio of applied stress to averaged strain on the loading edges. It is found that the interfacial stresses between the circular inclusion and matrix increase dramatically when the negative stiffness is so tuned that overall stiffness is unbounded. Furthermore, it is found that stress distributions in the inclusion are not uniform, contrary to Eshelby's theorem, which states, for two-phase, infinite composites, the inclusion's stress distribution is uniform when the shape of the inclusion has higher symmetry than an ellipse. The rationale for this nonuniform stress distributions is due to nonlocal effects induced from negative stiffness.
The article presents a device for spatially resolved and simultaneous measurements of forces and currents in particle beams, especially in beams composed of ions and neutral atoms. The forces are exerted by the impinging beam particles on a plane circular conductive target plate of 20 mm diameter mounted on a pendulum with electromagnetic force compensation. The force measurement in the micronewton range is achieved by electromagnetic compensation by means of static Helmholtz coils and permanent magnets attached to the pendulum. Exemplary measurements are performed in the 1.2 keV beam of a broad beam ion source. The simultaneous measurements of forces and currents onto the same target are compared with each other and with Faraday cup measurements.
Fresnel zone plates (FZPs) are circular diffractive elements that operate as a lens for x-rays. They have gained interest in the field of laser-plasma physics due to their ability to achieve higher spatial resolution than pinholes. Their design and implementation are complicated by the fact that a significant amount of the x-rays passing through the FZP will not diffract (zeroth order) and present a background to the measurement. This background can be large and inhomogeneous depending on the geometric setup of the experiment. Furthermore, we present calculations of the diffracted (first order) and un-diffracted (zeroth order) flux profiles, which makes it possible to optimize the contrast between the first order imaging rays and the zeroth order background. Calculations for the implementation of a central block in the FZP, designed to block the zeroth from the entire field of view, are also presented.
Capacitively coupled plasma glow discharges have been extensively used for materials processing in numerous industrial applications. Considerable research has been performed on plasma sheaths and standing waves over a capacitive applicator, which typically holds the processed substrate (e.g., a semiconductor wafer). In this work, we demonstrate for the first time the existence of normal modes in electric potential analogous to the vibrational modes in circular membranes and plates. These modes are exhibited through cross spectral analysis of the plasma potential measured with an emissive probe at 208 spatial positions and sampled at 1 GHz. These modes exist at several frequencies and are described by a series of Bessel functions. The data further suggests a nonlinear interaction between modes of different frequencies.
The objective of this work is to extend the thermal-mechanical, elastic-plastic calibrations for 304L stainless steel [1] and and 6061-T651 aluminum alloy [2] to the regime between room temperature and -40 °C. The basis to extend the calibration consisted of new uniaxial tension tests conducted at -40 °C using the same plate material stocks, circular cylindrical specimen geometries and testing apparatus as previously, followed by attempts to fit power-law hardening functions to replicate the response observed in the specimens and then extend the yield, hardening constant, hardening exponent and rate constant functions in the calibrations to cover the new temperature regime.
A large space structure with members missing was investigated using a finite element analysis. The particular structural configuration was the tetrahedral truss, with attention restricted to one of its planar faces. Initially the finite element model of a complete face was verified by comparing it with known results for some basic loadings. Then an analysis was made of the structure with members near the center removed. Some calculations were made on the influence of the mesh size of a structure containing a hexagonal hole, and an analysis was also made of a structure with a rigid hexagonal insert. In general, load concentration effects in these trusses were significantly lower than classical stress concentration effects in an infinitely wide isotropic plate with a circular rigid inclusion, although larger effects were obtained when a hole extended over several rings of elements.
A finite element stress analysis which consists of a membrane and interlaminar shear spring analysis was developed. This approach was utilized in order to model physically realistic failure mechanisms while maintaining a high degree of computational economy. The accuracy of the stress analysis predictions is verified through comparisons with other solutions to the composite laminate edge effect problem. The stress analysis model was incorporated into an existing fatigue analysis methodology and the entire procedure computerized. A fatigue analysis is performed upon a square laminated composite plate with a circular central hole. A complete description and users guide for the computer code FLAC (Fatigue of Laminated Composites) is included as an appendix.
The problem of stress wave generation in a linear thermoelastic solid by a pulsed magnetic field is investigated both analytically and experimentally for a cylindrically symmetric conducting solid. A dynamic response analysis is developed to correlate magnetic, thermal, and stress fields in the solid with the time history of the electric current. In the experiment, a transient magnetic field was applied normal to a large conducting plate with a circular hole. Initially the field was confined to the interior of the circular hole. The field was generated by discharging a large capacitor bank through a solenoidal coil. The plane-stress cylindrical stress waves are 1-D in nature. The relative effects of the magnetic body force and thermoelastic stresses, both generated by the electromagnetic field, are assessed.
Axisymmetric equilibrium shapes of conducting drops and bubbles, (1) pendant or sessile on one face of a circular parallel-plate capacitor or (2) free and surface-charged, are found by solving simultaneously the free boundary problem consisting of the augmented Young-Laplace equation for surface shape and the Laplace equation for electrostatic field, given the surface potential. The problem is nonlinear and the method is a finite element algorithm employing Newton iteration, a modified frontal solver, and triangular as well as quadrilateral tessellations of the domain exterior to the drop in order to facilitate refined analysis of sharply curved drop tips seen in experiments. The stability limit predicted by this computer-aided theoretical analysis agrees well with experiments.
Advances and current trends in plate bucklin research are summarized. The field is divided into three parts: (1) classical buckling studies, including plates of rectangular, circular and other shapes; (2) classical complicating effects, including elastic foundation, anisotropic material, variable thickness, shear deformation and nonhomogeneous material; and (3) nonclassical considerations, including postbuckling, imperfections, parametric excitation, follower forces, magnetoelastic buckling and inelastic buckling.
The integral representation method was used to obtain numerical solutions of the compressible, unsteady, two-dimensional Navier-Stokes equations for subsonic flows. The equations were written with the vorticity, the dilatation, the density, and the enthalpy as the dependent variables. The method was tested by solving the following problems: the flow over a flat plate, around a circular cylinder, and around a Joukowski airfoil. The last two problems involved massive flow separation. The approach offers the capability of confining the domain of computations to the region where two quantities, the vorticity and the difference in dilatation between the real flow and the potential flow around the body, are non-negligible.
The turbulent flow in a simulated wing-fuselage juncture has been investigated using Laser Velocimetry. The juncture was simulated by a splitter plate with an unswept wing model mounted perpendicular to it. The use of sharp wing leading edge results in the elimination of separation ahead of leading edge, and hence the separation vortex. Secondary flow induced by Reynolds stress gradients is the main source of vortical motion in the juncture formed by the plate and the flat surface of the wing, whereas in the juncture formed by the plate and the circular arc surface of the wing, streamwise vorticity is generated because of the presence of lateral curvature in the flow field. The results of this study indicate that fillets in the juncture can improve the flow characteristics near the wing trailing edge.
The concept which imputes initial free edge interlaminar damage to the differences in material properties among adjacent laminae, formerly applied to straight free edges, is presently extended to the case of curved free edges through interpretation in terms of differences in the shear and elongation strains among adjacent laminae. Attention is given to both material property differences and laminate strain spatial distributions at the hole edge. Since a large strain level and a small difference in material properties are found to be as damaging as a small strain and large difference, interlaminar damage will probably begin at a circumferential location other than the net section. These findings are further explored in view of a second extension, using the edges replication technique to record damage at a curved free edge. The damage recorded for uniaxially loaded plates with central circular holes and semicircular edge notches are compared with difference theory predictions.
Parametic investigations are performed using several two dimensional finite element formulations to determine their suitability for use in predicting extremum stresses in marine propellers. Comparisons are made of two NASTRAN elements (CTRIM6 and CTRAIA2) wherein elasticity properties have been modified to yield plane strain results. The accuracy of the elements is investigated by comparing finite element stress predictions with experimentally determined stresses in two classical cases: (1) tension in a flat plate with a circular hole; and (2) a filleted flat bar subjected to in-plane bending. The CTRIA2 element is found to provide good results. The displacement field from a three dimensional finite element model of a representative marine propeller is used as the boundary condition for the two dimensional plane strain investigations of stresses in the propeller blade and fillet. Stress predictions from the three dimensional analysis are compared with those from the two dimensional models. The validity of the plane strain modifications to the NASTRAN element is checked by comparing the modified CTRIA2 element stress predictions with those of the ABAQUS plane strain element, CPE4.
Heat transfer measurements have been made in the stagnation region of a flat plate with a circular leading edge. Electrically heated aluminum strips placed symmetrically about the leading edge stagnation region were used to measure spanwise averaged heat transfer coefficients. The maximum Reynolds number obtained, based on leading edge diameter, was about 100,000. The model was immersed in the flow field downstream of an approximately half scale model of a can-type combustor from a low NO(x), ground based power-generating turbine. The tests were conducted with room temperature air; no fuel was added. Room air flowed into the combustor through six vane type fuel/air swirlers. The combustor can contained no dilution holes. The fuel/air swirlers all swirled the incoming airflow in a counter clockwise direction (facing downstream). A 5-hole probe flow field survey in the plane of the model stagnation point showed the flow was one big vortex with flow angles up to 36' at the outer edges of the rectangular test section. Hot wire measurements showed test section flow had very high levels of turbulence, around 28.5 percent, and had a relatively large axial-length scale-to-leading edge diameter ratio of 0.5. X-wire measurements showed the turbulence to be nearly isotropic. Stagnation heat transfer augmentation over laminar levels was around 77 percent and was about 14 percent higher than predicted by a previously developed correlation for isotropic grid generated turbulence.