Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CIGS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems

Hydrogen power park experiments in Hawai‘i produced real-world data on the performance of commercialized electrochemical components and power systems integrating renewable and hydrogen technologies. By analyzing the different losses associated with the various equipment items involved, this work identifies the different improvements necessary to increase the viability of these technologies for commercial deployment. The stand-alone power system installed at Kahua Ranch on the Big Island of Hawaii required the development of the necessary tools to connect, manage and monitor such a system. It also helped the electrolyzer supplier to adapt its unit to the stand-alone power system application. Hydrogen fuel purity assessments conducted at the Hawai‘i Natural Energy Institute (HNEI) fuel cell test facility yielded additional knowledge regarding fuel cell performance degradation due to exposure to several different fuel contaminants. In addition, a novel fitting strategy was developed to permit accurate separation of the degradation of fuel cell performance due to fuel impurities from other losses. A specific standard MEA and a standard flow field were selected for use in future small-scale fuel cell experiments. Renewable hydrogen production research was conducted using photoelectrochemical (PEC) devices, hydrogen production from biomass, and biohydrogen analysis. PEC device activities explored novel configurations of ‘traditional’ photovoltaic materials for application in high-efficiency photoelectrolysis for solar hydrogen production. The model systems investigated involved combinations of copper-indium-gallium-diselenide (CIGS) and hydrogenated amorphous silicon (a-Si:H). A key result of this work was the establishment of a robust “three-stage” fabrication process at HNEI for high-efficiency CIGS thin film solar cells. The other key accomplishment was the development of models, designs and prototypes of novel ‘four-terminal’ devices integrating high-efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world applications. The extra revenues hydrogen can provide to these multi-product systems can improve profitability. The fact of the matter, though, is that the focused commercialization of hydrogen from biological processes awaits some necessary scientific breakthroughs and much higher conventional energy prices.

08 HYDROGEN↗

Significance of metastable acceptors in Cu(In,Ga)Se 2 solar cells in accelerated lifetime testing

The significance of metastable acceptors in Cu(In,Ga)Se 2 (CIGS) solar cells in accelerated lifetime testing has been investigated. Dry heating under light irradiation improves the conversion efficiency of CIGS solar cells at the early stage, which slightly decreases after long-term testing. However, after dry heating in the dark, the conversion efficiency significantly decreases. The net acceptor concentration considerably decreases after dark heating, and the reduction in the number of metastable acceptors results in decreases in open-circuit voltage and fill factor. After heat illumination treatment, the net acceptor concentration increases because of the metastable acceptors in CIGS layers, and the open-circuit voltage and fill factor partly recover. Therefore, the concentrations of metastable acceptors should be controlled by light irradiation or current injection with positive bias to evaluate correctly the degradation rates during accelerated lifetime testing.

14 SOLAR ENERGY↗

Inkjet Printed Metallizations for Cu(In1-xGax)Se2 Photovoltaic Cells

This study reports the inkjet printing of Ag front contacts on Aluminum doped Zinc Oxide (AZO)/intrinsic Zinc Oxide (i-ZnO)/CdS/Cu(In{sub 1-x}Ga{sub x})Se{sub 2} (CIGS)/Mo thin film photovoltaic cells. The printed Ag contacts are being developed to replace the currently employed evaporated Ni/Al bi-layer contacts. Inkjet deposition conditions were optimized to reduce line resistivity and reduce contact resistance to the Al:ZnO layer. Ag lines printed at a substrate temperature of 200 C showed a line resistivity of 2.06 {mu}{Omega} {center_dot} cm and a contact resistance to Al:ZnO of 8.2 {+-} 0.2 m{Omega} {center_dot} cm{sup 2} compared to 6.93 {+-} 0.3 m{Omega} {center_dot} cm{sup 2} for thermally evaporated contacts. These deposition conditions were used to deposit front contacts onto high quality CIGS thin film photovoltaic cells. The heating required to print the Ag contacts caused the performance to degrade compared to similar devices with evaporated Ni/Al contacts that were not heated. Devices with inkjet printed contacts showed 11.4% conversion efficiency compared to 14.8% with evaporated contacts. Strategies to minimize heating, which is detrimental for efficiency, during inkjet printing are proposed.

14 SOLAR ENERGY↗

Evaluating the economic viability of CdTe/CIS and CIGS/CIS tandem photovoltaic modules

In this paper, we analyze the potential cost competitiveness of two frameless, glass–glass thin-film tandem photovoltaic module structures, cadmium telluride (CdTe)/CuInSe 2 (CIS) and CuIn 0.3 Ga 0.7 Se 2 (CIGS)/CIS, based on the demonstrated cost of manufacturing the respective component cell technologies in high volume. To consider multiple economic scenarios, we base the CdTe/CIS module efficiency on the current industrial production of CdTe modules, while for CIGS/CIS, we use an aspirational estimate for CIGS efficiency. We focus on four-terminal mechanically stacked structures, thus avoiding the need to achieve current matching between the two cells. The top cell in such a tandem must have a transparent back contact, which has not been successfully implemented to date. However, for the purpose of understanding the economic viability of both tandems, we assume that this can be implemented at a cost similar to that of sputtered indium tin oxide. The cost of both tandem module structures was found to be nearly identical on an equal-area basis and approximately $30/m 2 higher than the single-junction alternatives. Both tandem modules are about 4% (absolute) more efficient than a module by using the top-cell material alone. We find that these tandem modules might reduce total system cost by as much as 11% in applications having a high area-related balance-of-system cost, such as area-constrained residential systems; however, the relative advantage of tandems decreases in the cases where balance-of-system costs are lower, such as in commercial and utility scale systems.

14 SOLAR ENERGY↗

Surface and bulk effects of K in highly efficient Cu 1-x K x InSe 2 solar cells

To advance knowledge of the beneficial effects of K in Cu(In,Ga)(Se,S) 2 (CIGS) photovoltaic (PV) absorbers, recent Cu-K-In-Se phase growth studies have been extended to PV performance. First, the effect of distributing K throughout bulk Cu 1-x K x InSe 2 absorbers at low K/(K+Cu) compositions (0 = x = 0.30) was studied. Efficiency, open-circuit voltage (VOC), and fill factor (FF) were greatly enhanced for x ~ 0.07, resulting in an officially-measured 15.0%-efficient solar cell, matching the world record CuInSe 2 efficiency. The improvements were a result of reduced interface and bulk recombination, relative to CuInSe 2 (x ~ 0). However, higher x compositions had reduced efficiency, short-circuit current density (J SC ), and FF due to greatly increased interface recombination, relative to the x ~ 0 baseline. Next, the effect of confining K at the absorber/buffer interface at high K/(K+Cu) compositions (0.30 = x = 0.92) was researched. Previous work showed that these surface layer growth conditions produced CuInSe 2 with a large phase fraction of KInSe 2 . After optimization (75 nm surface layer with x ~ 0.41), these KInSe 2 surface samples exhibited increased efficiency (officially 14.9%), VOC, and FF as a result of decreased interface recombination. The KInSe 2 surfaces had features similar to previous reports for KF post-deposition treatments (PDTs) used in world record CIGS solar cells - taken as indirect evidence that KInSe 2 can form during these PDTs. Both the bulk and surface growth processes greatly reduced interface recombination. However, the KInSe 2 surface had higher K levels near the surface, greater lifetimes, and increased inversion near the buffer interface, relative to the champion bulk Cu 1-x K x InSe 2 absorber. These characteristics demonstrate that K may benefit PV performance by different mechanisms at the surface and in the absorber bulk.

14 SOLAR ENERGY↗

Using hole injection layers for decreased metastability and higher performance in Cu(In,Ga)Se 2 devices

In this work, modifications to the buffer structure in Cu(In,Ga)Se 2 (CIGS) solar cells are examined in terms of power conversion efficiency and metastability. Varying amounts of thin hole-injecting layers are introduced at different locations in the CIGS/Zn(O,S) device structure. It is found that such layers simultaneously increase performance and decrease metastability. The most effective variant produces devices without metastability and with higher efficiency than the CdS-only controls. The most effective location for hole injection is found to be between the Zn(O,S) buffer and the transparent conductor. At this location, passivation of the CIGS surface is not a function of the hole injection layer, and thus a variety of materials with appropriate band-edge energies should achieve the same purpose.

36 MATERIALS SCIENCE↗

Hydrazine-Free Solution-Deposited CuIn(S,Se)2 Solar Cells by Spray Deposition of Metal Chalcogenides

Solution processing of semiconductors, such as CuInSe2 and its alloys (CIGS), can significantly reduce the manufacturing costs of thin film solar cells. Despite the recent success of solution deposition approaches for CIGS, toxic reagents such as hydrazine are usually involved, which introduce health and safety concerns. Here, we present a simple and safer methodology for the preparation of high-quality CuIn(S, Se)2 absorbers from metal sulfide solutions in a diamine/dithiol mixture. The solutions are sprayed in air, using a chromatography atomizer, followed by a postdeposition selenization step. Two different selenization methods are explored resulting in power conversion efficiencies of up to 8%.

14 SOLAR ENERGY↗

Colloidal AInSe 2 (A = K, Rb, Cs) Nanocrystals with Tunable Crystal and Band Structures

Wide band gap AInSe 2 (A = K, Rb, Cs) is an important interlayer material for improving the efficiency of Cu(In,Ga)(S,Se) 2 (CIGS) solar cells. Compared to high-vacuum deposition and solid-state synthesis, a less energyintensive method is of interest for its fabrication. Herein, we present the rapid, low-temperature colloidal synthesis of AInSe 2 nanocrystals that opens a pathway for convenient solution processing. The crystal structures and electronic band structures of the nanocrystals were studied, and their particle morphology was found to be dependent on the choice of alkali metal and selenium precursors. Homogeneous solid solution (K,Rb,Cs)InSe 2 nanocrystals were synthesized using a mixture of alkali metal precursors. Their compositions, lattice parameters, and band gaps were easily tuned based on the K:Rb:Cs precursor ratio, providing potential for interface engineering of CIGS nanocrystal-based solar cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spatially Resolved Recombination Analysis of CuIn $_\text{x}$ Ga $_\text{1-x}$ Se $_{2}$ Absorbers With Alkali Postdeposition Treatments

In this contribution, we probe spatial variations in charge-carrier recombination in CuIn x Ga 1-x Se 2 (CIGS) absorbers grown on soda-lime glass (SLG) and alkali-free sapphire substrates with NaF and KF postdeposition treatments (PDTs). Temperature-and illumination-dependent device measurements are used to track interface recombination and recombination in the quasi-neutral region. The analysis of these data reveals that the benefit of alkali PDTs depends on the substrate: interface recombination is reduced in devices grown on sapphire substrates, whereas recombination in the quasi-neutral regions is reduced in devices grown on SLG substrates. Cathodoluminescence (CL) spectrum imaging is used to study the spatial distribution of recombination with respect to the grain structure. The grain-boundary CL contrast is similar in films with no PDT, NaF PDT, or KF PDT. A reduced grain-boundary contrast is observed with a NaF + KF PDT; however, suggesting a reduced recombination strength at the grain boundaries (GBs) for combined NaF + KF treatment. CL spectra indicate band tailing, consistent with the fluctuating potential model. Fluctuating potentials are believed to reduce open-circuit voltage, but their spatial distribution has not been studied. Here, CL spectrum imaging data are used to generate maps of the root-mean-square value of the potential energy fluctuations-γ. These maps reveal a bimodal ..gamma.. distribution for all samples: ..gamma.. is generally in the range ~15-50 meV or ~100-180 meV. The higher ..gamma.. range is more significantly affected by the PDTs; after the PDTs, it is strongly correlated with GBs. The lower ..gamma.. range is correlated with higher emission intensity regions, typically grain interiors, and increases in area fraction after the PDTs. These results demonstrate how spatially resolved luminescence and device characterization measurements can be used to monitor changes in recombination in CIGS films and photovoltaic devices. Such measurements can complement empirical device optimization and help improve device performance.

14 SOLAR ENERGY↗

Effect of Window-Layer Materials on p-n Junction Location in Cu(In,Ga)Se 2 Solar Cells

We report on measurements of junction location in Cu(In,Ga)Se $_{2}$ (CIGS) solar cells with different window-layer materials by nm-resolution electrical potential/field profiling across the junction using Kelvin probe force microscopy imaging on cross-section of the devices. The results illustrate that the device with a CdS window layer (CdS/CIGS) has a buried homojunction located inside the CIGS absorber with ~40-nm junction depth, whereas the ZnOS/CIGS devices with and without partial electrolyte treatment prior to the window-layer deposition are similar, exhibiting a heterointerface junction. This junction location may contribute in part to the highest efficiency of the CdS/CIGS device among the three devices.

14 SOLAR ENERGY↗

Voltage-Induced Charge Redistribution in Cu(In,Ga)Se 2 Devices Studied With High-Speed Capacitance–Voltage Profiling

Devices made from Cu(In, Ga)Se 2 (CIGS) solar cell material have been evaluated with high-speed capacitance-voltage profiling after stepwise voltage changes. The changes primarily affect near-interface charge at deep acceptors within the CIGS absorber layer and generate temperature-dependent capacitance changes observed in deep-level transient spectroscopy measurements. SCAPS device modeling indicates that the deep acceptor concentration is up to the two orders of magnitude higher than the shallow doping level. High deep acceptor concentrations are found in all materials studied here. In conclusion, the large deep defect levels are high enough to limit minority carrier lifetime and cell efficiency.

14 SOLAR ENERGY↗

Potential-Induced Degradation Depends on Leakage Current and Light/Electrical Bias in Cu(In,Ga)Se 2 Devices

Potential-induced degradation (PID) of encapsulated Cu(In,Ga)Se 2 (CIGS) solar cells was researched for different substrates: soda-lime glass (SLG), SLG with an Al 2 O 3 diffusion barrier, and borosilicate glass (BSG). The Al 2 O 3 and BSG samples increased the time to PID failure by 5x and 30x, respectively. The relationship among PID and coulombs transferred from the substrate to the device through leakage current differed depending on the sample type. When the (unrepresentative) dark PID stress test was interrupted to characterize devices with light/electrical bias, PID was partially reversed. Furthermore, applying high voltage stress to open-circuit devices was less damaging, relative to forward-biased and short-circuited cells. Light/electrical bias may therefore reduce PID by driving alkali metal cations away from the p-n junction to diminish their degrading effects. These results show that device light/electrical bias should be carefully controlled during CIGS PID testing, as it affects PID in addition to leakage current.

14 SOLAR ENERGY↗

Recent Progress in Nanoelectrical Characterizations of CdTe and Cu(In,Ga)Se2

We report two recent nanoelectrical characterizations of CdTe and Cu(In, Ga)Se 2 (CIGS) thin-film solar cells by developing atomic force microscopy-based nanoelectrical probes. Charges trapped at defects at the CdS/CdTe interface were probed by Kelvin probe force microscopy (KPFM) potential mapping and by ion-milling the CdTe superstrate device in a bevel glancing angle of ~0.5 degrees. The results show randomly distributed donor-like defects at the interface. The effect of K post-deposition treatment on the near-surface region of the CIGS film was studied by KPFM potential and scanning spreading resistance microscopy (SSRM) resistivity mapping, which shows passivation of grain-boundary potential and improvement of resistivity uniformity by the K treatment.

14 SOLAR ENERGY↗

Post-Deposition Recrystallization of Co-Evaporated CuIn x Ga (1-x) Se 2 Films by Bromide Vapor Treatments

CIGS films deposited at 400°C onto molybdenum-coated soda-lime glass substrates by co-evaporation were annealed in InBr 3 vapors or CuBr with Se vapors. The treatments were conducted at 400°C, 450°C, or 500°C for one hour. The InBr 3 treatments above 400°C and CuBr with Se treatments at 500°C resulted in increased grain size, improved crystallinity, and a decrease in Cu 2 Se phase. Annealed samples also exhibited large surface facets. CIGS films deposited at 350°C were also investigated in InBr 3 and CuBr with Se vapors at 450°C for one hour. Furthermore, these treatments resulted in increased grain size and less deviations from the as-deposited composition.

14 SOLAR ENERGY↗

Degradation Mechanism Due to Water Ingress Effect on the Top Contact of Cu(In,Ga)Se2 Solar Cells

The impact of moisture ingress on the surface of copper indium gallium diselenide (CIGS) solar cells was studied. While industry-scale modules are encapsulated in specialized polymers and glass, over time, the glass can break and the encapsulant can degrade. During such conditions, water can potentially degrade the interior layers and decrease performance. The first layer the water will come in contact with is the transparent conductive oxide (TCO) layer. To simulate the impact of this moisture ingress, complete devices were immersed in deionized water. To identify the potential sources of degradation, a common window layer for CIGS devices—a bilayer of intrinsic zinc oxide (i-ZnO) and conductive indium tin oxide (ITO)—was deposited. The thin films were then analyzed both pre and post water soaking. To determine the extent of ingress, dynamic secondary ion mass spectroscopy (SIMS) was performed on completed devices to analyze impurity diffusion (predominantly sodium and potassium) in the devices. The results were compared to device measurements, and indicated a degradation of device efficiency (mostly fill factor, contrary to previous studies), potentially due to a modification of the alkali profile.

14 SOLAR ENERGY↗

Density Profiles in Sputtered Molybdenum Thin Films and Their Effects on Sodium Diffusion in Cu(InxGa1-x)Se2 Photovoltaics: Preprint

Molybdenum (Mo) thin films were sputtered onto soda lime glass (SLG) substrates. The main variable in the deposition parameters, the argon (Ar) pressure pAr, was varied in the range of 6 - 20 mTorr. Ex situ spectroscopic ellipsometry (SE) was performed to find out that the dielectric functions of the Mo films were strongly dependent on pAr, indicating a consistent and significant decrease in theMo film density pMo with increasing pAr. This trend was confirmed by high-angle-annular-dark-field scanning transmission electron microscopy. Dielectric functions of Mo were then found to be correlated with secondary ion mass spectroscopy profiles of Sodium (Na) in the Cu(InxGa1-x)Se2 (CIGS) layer grown on top of Mo/SLG. Therefore, in situ optical diagnostics can be applied for processmonitoring and optimization in the deposition of Mo for CIGS solar cells. Such capability is demonstrated with simulated optical transmission and reflectance of variously polarized incident light, using dielectric functions deduced from SE.

14 SOLAR ENERGY↗

Thickness Effect of Al-Doped ZnO Window Layer on Damp Heat Stability of CuInGaSe2 Solar Cells: Preprint

We investigated the damp heat (DH) stability of CuInGaSe2 (CIGS) solar cells as a function of thickness of the Al-doped ZnO (AZO) window layer from the 'standard' 0.12 ..mu..m to a modest 0.50 ..mu..m over an underlying 0.10-..mu..m intrinsic ZnO buffer layer. The CIGS cells were prepared with external electrical contact using fine Au wire to the tiny 'standard' Ni/Al (0.05 ..mu..m/3 ..mu..m)metal grid contact pads. Bare cell coupons and sample sets encapsulated in a specially designed, Al-frame test structure with an opening for moisture ingress control using a TPT backsheet were exposed to DH at 85oC and 85% relative humidity, and characterized by current-voltage (I-V), quantum efficiency (QE), and (electrochemical) impedance spectroscopy (ECIS). The results show that bare cellsexhibited rapid degradation within 50-100 h, accompanied by film wrinkling and delamination and corrosion of Mo and AlNi grid, regardless of AZO thickness. In contrast, the encapsulated cells did not show film wrinkling, delamination, and Mo corrosion after 168 h DH exposure; but the trend of efficiency degradation rate showed a weak correlation to the AZO thickness.

14 SOLAR ENERGY↗