Insights into the Enhanced Cycle and Rate Performances of the F-Substituted P2-Type Oxide Cathodes f
Explore the source record for details and available documents.
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
Nowadays, lithium-ion batteries (LIBs) take a very important role for energy storage. LIBs are dominant in consumer electronics, and they have also entered the market of hybrid electric vehicles (HEVs), plug-in HEVs, and pure EVs. However, state-of-the-art LIBs are electrochemically intercalation-based and are still limited in energy density and power rates. To address these challenges and others (e. g. safety issues and cost), conversion-based copper sulfides (Cu x S, 1≤x≤2) have been investigated as alternative cathodes for improved electrochemical performance, that is, higher energy density, better cycling stability, and enhanced rate capability. In this paper, we summarize the recent research progress on Cu x S to gain a better understanding of the material's electrochemical mechanisms and develop feasible strategies for improving its performance.
Explore the source record for details and available documents.
Abstract not provided
Explore the source record for details and available documents.
We report on electrochemical properties of Li/Li 1.2 Ni 0.15 Co 0.1 Mn 0.55 O 2 secondary batteries in electrolytes designed to stabilize electrodeposition of lithium. Ethylene carbonate (EC): dimethyl carbonate (DMC) containing a LiPF6/LiF salt blend stabilizes lithium electrodeposition and enables Li/Li 1.2 Ni 0.15 Co 0.1 Mn 0.55 O 2 batteries with a high discharge capacity of 270 mAh·g - 1 at 0.05 mA cm - 2 . Cells containing the LiF-reinforced electrolytes also exhibit excellent capacity retention over 500 cycles with Columbic efficiencies approaching 100%. Post-mortem SEM analysis of the lithium anode shows more compact deposition in the presence of the LiF salt additive, while XPS depth profile analysis of cathodes show a more uniform distribution of Mn over the first 180 nm from the electrode/electrolyte interface. The results imply that LiF reinforced electrolytes simultaneously facilitate stable lithium electrodeposition and reduce Mn dissolution.
The LiMnPO4·Li3V2(PO4)3/C composite cathode material was synthesized from Mn(VO3)2 nanosheet precursor, which was prepared by a hydrothermal method. The structure and morphology of the composite were systematically investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and scanning transmission electron microscopy (STEM), etc. The LiMnPO4·Li3V2(PO4)3/C composite material exhibits a low polarization and high specific capacity of 150.7 mAh g-1 at 0.1C in voltage range of 2.5–4.5V, and excellent cycle and rate performance for its stable nanocomposite framework. The composite material dominantly exists in the morphological shape of nanograins and nanorods, which increases the surface area and hence facilitate the electrolyte penetration. The nanoparticle components were even further identified in detail.
Not Available
Explore the source record for details and available documents.
The rate of voltage fade in 0.5Li2MnO3•0.5LiNi0.375Mn0.375Co0.25O2 cathodes was measured in half-cells in a temperature range of 25 to 55°C. On the basis of the dependence of the values of the open-circuit potential with cycle count and temperature, the voltage fade phenomenon seems to consist of two chemical processes: one that can be described using a parabolic rate law and another that uses a linear-with-time law. As the cycling temperature increased, the relative contributions of the two processes changed. On the basis of the overall rate versus temperature data, we believe the two processes may be in competition with one another.
Infiltrated La 0.6 Sr 0.4 Co 0.2 Fe 0.8 O 3-δ (LSCF) sintered porous powder cathodes for solid oxide fuel cells have been investigated by synchrotron ultra-small angle x-ray scattering (USAXS). Here, we demonstrated that atomic layer deposition (ALD) is the method for a uniform coating and liquid-phase infiltration for growing nanoscale particles on the porous LSCF surfaces. The MnO infiltrate, grown by ALD, forms a conformal layer with a uniform thickness throughout the pores evidenced by USAXS thickness fringes. The La 0.6 Sr 0.4 CoO 3 (LSC) and La 2 Zr 2 O 7 (LZO) infiltrates, grown by liquid-phase infiltration, were found to form nanoscale particles on the surfaces of LSCF particles resulting in increased surface areas. In conclusion, impedance measurements suggest that the catalytic property of LSC infiltrate, not the increased surface area of LZO, is important for increasing oxygen reduction activities.
Abstract not provided
Explore the source record for details and available documents.
Abstract not provided
To improve the electrochemical performance of the high energy Li–O2 batteries, it is important to design and construct a suitable and effective oxygen-breathing cathode. Herein, a three-dimensional (3D) porous boron-doped reduction graphite oxide (B-rGO) material with a hierarchical structure has been prepared by a facile freeze-drying method. In this design, boric acid as the boron source helps to form the 3D porous structure, owing to its cross-linking and pore-forming function. This architecture facilitates the rapid oxygen diffusion and electrolyte penetration in the electrode. Meanwhile, the boron–oxygen functional groups linking to the carbon surface or edge serve as additional reaction sites to activate the ORR process. It is vital that boron atoms have been doped into the carbon lattices to greatly activate the electrons in the carbon π system, which is beneficial for fast charge under large current densities. Density functional theory calculation demonstrates that B-rGO exhibits much stronger interactions with Li5O6 clusters, so that B-rGO more effectively activates Li–O bonds to decompose Li2O2 during charge than rGO does. With B-rGO as a catalytic substrate, the Li–O2 battery achieves a high discharge capacity and excellent rate capability. Moreover, catalysts could be added into the B-rGO substrate to further lower the overpotential and enhance the cycling performance in future.
Explore the source record for details and available documents.
LiNiO 2 (LNO) is a high-capacity and model cathode first discovered in the 1980s that fell out of favor due to its intrinsic instabilities. However, research activities toward LNO are once again on the rise as the push for higher-energy-density cells marches on. Here we demonstrate here that with appropriate modern electrolytes, major performance improvements can be achieved with LNO with no additional modifications. Cells with a localized high concentration electrolyte (LHCE) deliver 92% capacity retention after 200 cycles compared with 56% capacity retention in a baseline carbonate electrolyte, maintain 94% capacity after high-voltage storage compared with 77% capacity, and display a higher onset temperature of thermal runaway of 244 °C compared with 188 °C. These improvements are attributed to the LHCE’s high oxidative stability and its formation of fluorine-rich interphases. Although further characterization of this new class of electrolyte is necessary, this work demonstrates that modern electrolytes can be drop-in enablers of high-capacity, long-cycle-life cells.