Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Bimetallic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Chemical and Structural Evolution of AgCu Catalysts in Electrochemical CO 2 Reduction

Silver–copper (AgCu) bimetallic catalysts hold great potential for electrochemical carbon dioxide reduction reaction (CO 2 RR), which is a promising way to realize the goal of carbon neutrality. Although a wide variety of AgCu catalysts have been developed so far, it is relatively less explored how these AgCu catalysts evolve during CO 2 RR. The absence of insights into their stability makes the dynamic catalytic sites elusive and hampers the design of AgCu catalysts in a rational manner. Here, in this study, we synthesized intermixed and phase-separated AgCu nanoparticles on carbon paper electrodes and investigated their evolution behavior in CO 2 RR. Our time-sequential electron microscopy and elemental mapping studies show that Cu possesses high mobility in AgCu under CO 2 RR conditions, which can leach out from the catalysts by migrating to the bimetallic catalyst surface, detaching from the catalysts, and agglomerating as new particles. Besides, Ag and Cu manifest a trend to phase-separate into Cu-rich and Ag-rich grains, regardless of the starting catalyst structure. The composition of the Cu-rich and Ag-rich grains diverges during the reaction and eventually approaches thermodynamic values, i.e., Ag 0.88 Cu 0.12 and Ag 0.05 Cu 0.95 . The separation between Ag and Cu has been observed in the bulk and on the surface of the catalysts, highlighting the importance of AgCu phase boundaries for CO 2 RR. In addition, an operando high-energy-resolution X-ray absorption spectroscopy study confirms the metallic state of Cu in AgCu as the catalytically active sites during CO 2 RR. Taken together, this work provides a comprehensive understanding of the chemical and structural evolution behavior of AgCu catalysts in CO 2 RR.

Chen, Peng-Cheng↗
DOE OSTI2021

Directing reaction pathways via in situ control of active site geometries in PdAu single-atom alloy catalysts

Abstract The atomic scale structure of the active sites in heterogeneous catalysts is central to their reactivity and selectivity. Therefore, understanding active site stability and evolution under different reaction conditions is key to the design of efficient and robust catalysts. Herein we describe theoretical calculations which predict that carbon monoxide can be used to stabilize different active site geometries in bimetallic alloys and then demonstrate experimentally that the same PdAu bimetallic catalyst can be transitioned between a single-atom alloy and a Pd cluster phase. Each state of the catalyst exhibits distinct selectivity for the dehydrogenation of ethanol reaction with the single-atom alloy phase exhibiting high selectivity to acetaldehyde and hydrogen versus a range of products from Pd clusters. First-principles based Monte Carlo calculations explain the origin of this active site ensemble size tuning effect, and this work serves as a demonstration of what should be a general phenomenon that enables in situ control over catalyst selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Nanoscale wetting controls reactive Pd ensembles in synthesis of dilute PdAu alloy catalysts

The performance of bimetallic dilute alloy catalysts is largely determined by the size of minority metal ensembles on the nanoparticle surface. By analyzing the synthesis of catalysts comprising Pd 8 Au 92 nanoparticles supported on silica using surface-sensitive techniques, we report that whether Pd overgrowth occurs before or after Au nanoparticle deposition onto the support controls the surface Pd ensemble size and abundance. These differences in Pd ensembles influence catalytic reactivity in H 2 –D 2 isotope exchange and benzaldehyde hydrogenation, which, in correlation with theoretical calculations, is used to elucidate the active site(s) in each reaction. To clarify how the synthetic sequence controls the formation of Pd ensembles, we combine numerical wetting calculations and molecular dynamics simulations (with a machine-learned force field) to visualize Pd deposition and migration on the nanoparticle surface, respectively. Our results suggest that the nanoparticle–support interface restricts nanoparticle accessibility to Pd deposition, which consequently controls the Pd ensemble size, illustrating the critical role of nanoscale wetting phenomena during bimetallic catalyst preparation.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Solid-state thermometry via ionic–electronic coupling in two-dimensional heterostructures

The coupling of ionic and electronic transport in solid-state systems offers new opportunities for realizing compact, energy-efficient sensing technologies, yet practical implementations remain limited. In this article, we introduce a two-dimensional iontronic platform based on field-effect transistors that integrate monolayer MoS 2 channels with van der Waals bimetallic thiophosphates ( AB P 2 X 6 , A = Li, Cu, Ag and so on; B = In, Sc and so on; and X = S and Se) as ionic gate dielectrics to realize on-chip thermometry. Specifically, we exploit thermally activated ion migration within the gate dielectric leading to conductance modulation in the MoS 2 channel for temperature sensing. We achieve ~1–2 °C resolution, fast electronic readout and subpicojoule energy consumption in an ultracompact footprint (~1 µm 2 ). Beyond thermometry, these results establish bimetallic thiophosphates as a versatile platform for solid-state iontronics and broaden the functional design space of van der Waals heterostructures for sensing, actuation and adaptive electronics.

42 ENGINEERING↗
DOE OSTI2023

Plasmonic nanorod probes’ journey inside plant cells for in vivo SERS sensing and multimodal imaging

Nanoparticle-based platforms are gaining strong interest in plant biology and bioenergy research to monitor and control biological processes in whole plants. However, in vivo monitoring of biomolecules using nanoparticles inside plant cells remains challenging due to the impenetrability of the plant cell wall to nanoparticles beyond the exclusion limits (5-20 nm). To overcome this physical barrier, we have designed unique bimetallic silver-coated gold nanorods (AuNR@Ag) capable of entering plant cells, while conserving key plasmonic properties in the near-infrared (NIR). To demonstrate cellular internalization and tracking of the nanorods inside plant tissue, we used a comprehensive multimodal imaging approach that included transmission electron microscopy (TEM), confocal fluorescence microscopy, two-photon luminescence (TPL), X-ray fluorescence microscopy (XRF), and photoacoustics imaging (PAI). We successfully acquired SERS signals of nanorods in vivo inside plant cells of tobacco leaves. On the same leaf samples, we applied orthogonal imaging methods, TPL and PAI techniques for in vivo imaging of the nanorods. This study first demonstrates the intracellular internalization of AuNR@Ag inside whole plant systems for in vivo SERS analysis in tobacco cells. This work demonstrates the potential of this nanoplatform as a new nanotool for intracellular in vivo biosensing for plant biology.

Cupil-Garcia, Vanessa↗
DOE OSTI2022

Computational studies of structural, energetic, and electronic properties of pure Pt and Mo and mixed Pt/Mo clusters: Comparative analysis of characteristics and trends

The added technological potential of bimetallic clusters and nanoparticles, as compared to their pure (i.e., one-component) counterparts, stems from the ability to further fine-tune their properties and, consequently, functionalities through a simultaneous use of the “knobs” of size and composition. The practical realization of this potential can be greatly advanced by the knowledge of the correlations and relationships between the various characteristics of bimetallic nanosystems on the one hand and those of their pure counterparts as well as pure constituent components on the other hand. Here, in this study, we present results of a density functional theory based study of pure Pt n and Mo n clusters aimed at revisiting and exploring further their structural, electronic, and energetic properties. These are then used as a basis for analysis and characterization of the results of calculations on two-component Pt n-m Mo m clusters. The analysis also includes establishing relationships between the properties of the Pt n-m Mo m clusters and those of their Pt n-m and Mo m components. One of the particularly intriguing findings suggested by the calculated data is a linear dependence of the average binding energy per atom in sets of Pt n-m Mo m clusters that have the same fixed number m of Mo atoms and different number n-m of Pt atoms on the fractional content (n-m)/n of Pt atoms. We derive an analytical model that establishes the fundamental basis for this linearity and expresses its parameters—the m-dependent slope and intercept—in terms of characteristic properties of the constituent components, such as the average binding energy per atom of Mo m and the average per-atom adsorption energy of the Pt atoms on Mo m . The conditions of validity and degree of robustness of this model and of the linear relationship predicted by it are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Gas-Induced Segregation in Pt-Rh Alloy Nanoparticles Observed by In Situ Bragg Coherent Diffraction Imaging

Bimetallic catalysts can undergo segregation or redistribution of the metals driven by oxidizing and reducing environments. Bragg coherent diffraction imaging (BCDI) was used to relate displacement fields to compositional distributions in crystalline Pt-Rh alloy nanoparticles. Three-dimensional images of internal composition showed that the radial distribution of compositions reverses partially between the surface shell and the core when gas flow changes between O 2 and H 2 . Our observation suggests that the elemental segregation of nanoparticle catalysts should be highly active during heterogeneous catalysis and can be a controlling factor in synthesis of electrocatalysts. Additionally, our study exemplifies applications of BCDI for in situ 3D imaging of internal equilibrium compositions in other bimetallic alloy nanoparticles.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Intensified Catalytic Conversion of CO2 into High Value Chemicals

The utilization of CO2 produced from power generation plants as a feedstock for creating new valuable products offers a strategy to reduce GHG emissions, offset carbon capture costs, and facilitate the rebalancing of the carbon cycle. After considering the thermodynamic requirement of potential products from CO2 utilization and their market size, formic acid is a desirable target that offers widespread utility in industrial chemical production and chemical energy storage as a liquid fuel. To effectively utilize CO2 from power generation plants, UK proposes an enhanced bimetallic oxide carbon utilization process (EBOCU) that enables electrochemical CO2 conversion to formic acid. The UK intensified electrocatalytic process combines three main components: 1) a novel bimetallic oxide electrocatalyst; 2) a stable electrochemical reactor using robust electrodes; and 3) a pressurized electrochemical reactor. The output from this project showed the economic viability of producing high-value formic acid from CO2 to both offset the cost associated with post-combustion CCS and reduce GHG emissions. This project developed and screened a series engineered catalysts to selectively reduce CO2 directly to formic acid. The best performing catalyst based on formic acid production, stability, and Faradaic efficiency, was immobilized on carbon electrodes, and tested inside a flow through reactor. After lab-scale testing was completed, the experimental data was used to perform a Life-Cycle Analysis (LCA) and conduct an Initial Technical and Economic Feasibility Study. The LCA showed a pathway to a net negative CO2 utilization process with the incorporation of renewable energy, while the TEA showed the potential to produce formic acid below the current commercial price. The UK EBOCU process was successfully demonstrated at the TRL3 level and has a clear pathway to further development and contribution to the nation’s ambitious decarbonization goals.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2024

Near-Net-Shape Hot Isostatic Press Manufacturing Modality for sCO2 CSP Capital Cost Reduction

Through this DOE funded 3.5-year research project, feasibility of fabricating supercritical carbon dioxide (sCO2) turbine components by powder metallurgy (PM) based near-net-shape (NNS) hot isostatic pressing (HIP) was demonstrated in a turbine nozzle ring, a turbine casing with Haynes 282 powder, and a bimetallic pipe with Haynes 282 and SS415 powder. As-HIP microstructure of various powders and HIP processing conditions was studied to downselect a condition for the prototype components. Tensile strength and low cycle fatigue (LCF) capability of PM HIP 282 was found to be superior to cast 282, despite a debit in creep stress capability that could be mitigated by component design modification. Near-Net-shape with minimal post machining was achieved by modeling the non-uniform shrinkage during HIP cycle and designing the HIP tooling to meet dimensional targets. The prototypes of turbine nozzle ring and bimetallic pipe were successful in achieving overall dimension, microstructure, and properties, despite dimensional tolerance affected by chemical milling rate. The prototype of a 1700lbs turbine casing was partially successful in achieving dimension, microstructure in as-HIP state, and providing consistent mechanical properties, however, cracking issue during post heat treatment required further investigation. The estimated manufacturing cost using NNS HIP was a ~50% reduction compared to forging with extensive machining, which translated into ~$100/kWe CAPEX cost reduction for concentrated solar power (CSP) power block.

14 SOLAR ENERGY↗
DOE OSTI2020

Nanoframes with three-dimensional electrocatalytic surfaces

Described herein are bimetallic nanoframes and methods for producing bimetallic nanoframes. A method may include providing a solution including a plurality of nanoparticles dispersed in a solvent, and exposing the solution to oxygen to convert the plurality of nanoparticles into a plurality of nanoframes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Engineering Ultrathin Alloy Shell in Au@AuPd Core-Shell Nanoparticles for Efficient Plasmon-Driven Photocatalysis

Bimetallic core-shell nanoparticles (NPs) possessing a synergetic coupling of plasmonic and catalytic metals have emerged as promising prototypes for efficient plasmon-driven photocatalysis. Here, Au@AuPd core-shell NPs composed of Au core NP and ultrathin AuPd shell are introduced to acquire improved light utilization efficiency in photocatalytic selective oxidation. With systematical control of the composition of the ultrathin alloy shell, it reveals that the Au@AuPd core-shell NPs with 10 at% Pd (in the single-atom alloy regime) is an effective nanostructure capable of maximizing the quantum yield of plasmon-induced light absorption and optimizing the surface electronic structure for catalytic reactions. This controlled system provides new insights into shell engineering for enhancing photocatalytic performance via the regulation of energy funneling processes in core-shell nanocatalysts.

36 MATERIALS SCIENCE↗
DOE OSTI2022

E ‐selective Semi‐hydrogenation of Alkynes under Mild Conditions by a Diruthenium Hydride Complex

Abstract The synthesis, characterization and catalytic activity of a new class of diruthenium hydrido carbonyl complexes bound to the t Bu PNNP expanded pincer ligand is described. Reacting t Bu PNNP with two equiv of RuHCl(PPh 3 ) 3 (CO) at 140 °C produces an insoluble air‐stable complex, which was structurally characterized as [Ru 2 ( t Bu PNNP)H(μ‐H)Cl(μ‐Cl)(CO) 2 ] ( 1 ) using solid‐state NMR, IR and X‐ray absorption spectroscopies and follow‐up reactivity. A reaction with KO t Bu results in deprotonation of a methylene linker to produce [Ru 2 ( t Bu PNNP * )H(μ‐H)(μ‐O t Bu)(CO) 2 ] ( 3 ) featuring a partially dearomatized naphthyridine core. This enables metal‐ligand cooperative activation of H 2 analogous to the mononuclear analogue, [Ru( t Bu PNP*)H(CO)]. In contrast to the mononuclear system, the bimetallic analogue 3 catalyzes the E ‐selective semi‐hydrogenation of alkynes at ambient temperature and atmospheric H 2 pressure with good functional group tolerance. Monitoring the semi‐hydrogenation of diphenylacetylene by 1 H NMR spectroscopy shows the intermediacy of Z ‐stilbene, which is subsequently isomerized to the E ‐isomer. Initial findings into the mode of action of this system are provided, including the spectroscopic characterization of a polyhydride intermediate and the isolation of a deactivated species with a partially hydrogenated naphthyridine backbone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Roads less traveled: Nitrogen reduction reaction catalyst design strategies for improved selectivity

Direct electrochemical nitrogen reduction for ammonia production is necessary to reduce the use of fossil fuels from conventional Haber–Bosch methods. Applications of nitrogen reduction electrocatalysts remain inhibited by slow reaction kinetics and low faradaic efficiencies because of competitive H2 production pathways. Current strategies to address this challenge in selectivity have focused on catalyst design, reactor configuration, and electrolyte conditions. This brief review discusses the thermodynamic and kinetic challenges in the field as well as current underused approaches for selective catalyst development including bimetallic catalysts, transition metal nitrides, and carbon supports.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Dilute Pd-in-Au alloy RCT-SiO 2 catalysts for enhanced oxidative methanol coupling

Dilute alloy catalysts have the potential to enhance selectivity and activity for large-scale reactions. Highly dilute Pd-in-Au nanoparticle alloys partially embedded in porous silica (“raspberry colloid templated” (RCT)-SiO 2 ) prove to be robust and selective catalysts for oxidative coupling of methanol. Palladium concentrations in the bimetallic nanoparticles as low as ~3.4 at.% catalyze the production of methyl formate with a selectivity of ~95% at conversions of ~55%, whereas conversions are low (<10%) for ~1.7 at.% Pd-in-Au nanoparticle and pure Au nanoparticle catalysts. Fractional reaction orders for both CH 3 OH and O 2 measured for ~3.4 at.% Pd-in-Au nanoparticles supported on RCT-SiO 2 indicated a complex mechanism in which the sites for O 2 dissociation are not saturated. Optimal methyl formate production was found for an equimolar mixture. There is no conversion of methanol in the absence of O 2 between 360 and 450 K. Finally, all observations are consistent with a mechanism derived from model studies, requiring that clusters of Pd be available on the catalyst for O 2 dissociation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Exploring the composition, phase separation and structure of AgFe alloys for magneto-optical applications

Bimetallic alloys with large discrepancies in atomic radii and crystal structure typically yield systems that are highly immiscible, even at high temperatures. The Ag x Fe 1−x binary system has limited solid and liquid solubility and thus phase separated Ag + Fe alloys should result. Furthermore, Ag has interesting plasmonic properties and Fe is a strong ferromagnet, thus magneto-plasmonic nanoparticles/films should result due to their phase separation. We have leveraged a combinatorial sputter deposition to synthesize thin films with a large Ag x Fe 1−x (0.19 < x < 0.84) phase space to correlate the composition and structure to the optical and magnetic properties for both as-deposited and annealed compositions.

Bimetallic alloys↗
DOE OSTI2021

Phase-Controlled Synthesis of Pd–Sn Nanocrystal Catalysts of Defined Size and Shape

Bimetallic Pd-based nanoparticles (NPs) are of interest as electrocatalysts for formic acid electrooxidation (FAEO) because of their higher initial catalytic activity and CO tolerance when compared to Pt. Intermetallic NPs (i-NPs) with specific geometric and electronic structures generally exhibit superior catalytic activity, selectivity, and durability when compared to their disordered (random alloy) counterparts; however, the colloidal synthesis of i-NPs remains a challenge. Here, a one-pot method was demonstrated as a facile route to obtain monodisperse Pd–Sn NPs with phase control, including intermetallic hexagonal Pd 3 Sn 2 (P6 3 /mmc), intermetallic orthorhombic Pd 2 Sn (Pnma), and alloy cubic Pd 3 Sn (FCC, Fm 3 ¯m) as size-controlled NPs with quasi-spherical shapes. Initial metal precursor ratios and reaction temperature were critical parameters to achieving phase control. Also, slight modifications of synthetic conditions resulted in either Pd 2 Sn nanorhombohedra or nanorods with tunable aspect ratios. A systematic evaluation of the Pd–Sn NPs for FAEO showed that most presented higher specific activities when compared to commercial Pd/C, in which Pd 2 Sn quasi-spheres and nanorhombohedra showed the highest catalytic activity for FAEO. Furthermore, these results highlight the benefits of phase-controlled Pd-based nanocatalysts with defined nanocrystal size and shape, with use of trioctylphospine (TOP) and oleic acid (OA) central to shape and size control.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗