Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band gap”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

First-Principles Discovery of Novel LiInP 2 S 6 Polymorphs with Promising Optoelectronic Responses

Recent advances in two-dimensional (2D) van der Waals (vdW) metal thiophosphates have attracted considerable attention due to their promising ionic conductivity, optical characteristics, and tunable physical properties. Within this material family, LiInP 2 S 6 has emerged as an intriguing candidate, not only because of its sensitivity to air and moisture but also due to its suitable band gap within the UV−vis range, enabling potential optoelectronic and photocatalytic applications. In this study, through comprehensive first-principles investigations, we unveil two previously unreported polymorphs of LiInP 2 S 6 in the monoclinic C2/c and trigonal P3̅1c (in-gap) space groups, in addition to examining the experimentally synthesized P3̅1c (in-layer) phase. Our studies identify the C2/c structure as the ground state, lying 9 meV per unit cell lower in energy than the experimentally realized trigonal P3̅1c (in-layer) phase. Further, we systematically examine the elastic, mechanical, thermodynamical, dynamical, electronic, and optical properties of all three polymorphs, confirming their mechanical, thermal, and dynamical stability. Notably, the P3̅1c (in-gap) phase exhibits enhanced stiffness, while the calculated indirect band gaps and strong photon absorption in the UV−vis range (∼3 eV) highlight the potential of the studied LiInP 2 S 6 phases for iontronic devices and optoelectronic applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Structure and properties of the Sr 2 In 1-x Sn x SbO 6 double perovskite

A series of n -type oxide double perovskite semiconductors, Sr 2 In 1-x Sn x SbO 6 (0 ≤ x ≤ 0.3) has been synthesized; Sn 4+ partially substitutes for In 3+ . 121 Sb and 119 Sn Mössbauer spectroscopy are employed to investigate the B-site cation ordering because this issue cannot be resolved by conventional diffraction techniques alone. Rigid ordering between In 3+ /Sn 4+ and Sb 5+ sites is revealed by the spectroscopic method, and hence in combination with the structural parameters extracted from the XRD structural refinements, the crystallographic structure of this series of compounds is depicted. Furthermore, the temperature dependent magnetic susceptibilities, band gaps, and carrier type are characterized, and the calculated band structure is presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Thermopower in a Zn-Based 3D Semiconductive Metal–Organic Framework

Conductive metal–organic frameworks (c-MOFs) have drawn increasing attention for their outstanding performance in energy-related applications. However, the majority of reported c-MOFs are based on 2D structures. Synthetic strategies for 3D c-MOFs are under-explored, leaving unrealized functionality in both their structures and properties. Here in this paper we report a 3D c-MOF, namely Zn-HAB, designed through topological analysis. Comprising a nitrogen donor linker, hexaaminobenzene, and Zn(II) node, Zn-HAB was found to have microporosity with a band-gap of approximately 1.68 eV. The relatively large band-gap results in a modest conduc-tivity of 0.86 mS cm -1 and a high Seebeck coefficient of 200 μV K -1 at 300 K. The power factor of 3.44 nW m -1 K -2 constitutes the first report of the thermoelectric properties of an intrinsically conductive 3D MOF.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Expanded Analogs of Three‐Dimensional Lead‐Halide Hybrid Perovskites

Abstract Replacing the Pb−X octahedral building unit of A I PbX 3 perovskites (X=halide) with a pair of edge‐sharing Pb−X octahedra affords the expanded perovskite analogs: A II Pb 2 X 6 . We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium‐based cations with low‐lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with A II =pyridinium and ammonium, we can isolate the contributions of the pyrazinium‐based orbitals in the band gap transition of A II Pb 2 X 6 . The organic‐molecule‐based conduction band and the inorganic‐ion‐based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.

Umeyama, Daiki↗
DOE OSTI2020

Expanded Analogs of Three-Dimensional Lead-Halide Hybrid Perovskites

Replacing the Pb-X octahedral building unit of A I PbX 3 perovskites (X=halide) with a pair of edge-sharing Pb-X octahedra affords the expanded perovskite analogs: A II Pb 2 X 6 . We report seven members of this new family of materials. In 3D hybrid perovskites, orbitals from the organic molecules do not participate in the band edges. In contrast, the more spacious inorganic sublattice of the expanded analogs accommodates larger pyrazinium-based cations with low-lying π* orbitals that form the conduction band, substantially decreasing the band gap of the expanded lattice. The molecular nature of the conduction band allows us to electronically dope the materials by reducing the organic molecules. By synthesizing derivatives with AII=pyridinium and ammonium, we can isolate the contributions of the pyrazinium-based orbitals in the band gap transition of A II Pb 2 X 6 . The organic-molecule-based conduction band and the inorganic-ion-based valence band provide an unusual electronic platform with localized states for electrons and more disperse bands for holes upon optical or thermal excitation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

High Compression‐Induced Conductivity in a Layered Cu–Br Perovskite

Abstract We show that the onset pressure for appreciable conductivity in layered copper‐halide perovskites can decrease by ca. 50 GPa upon replacement of Cl with Br. Layered Cu–Cl perovskites require pressures >50 GPa to show a conductivity of 10 −4 S cm −1 , whereas here a Cu–Br congener, (EA) 2 CuBr 4 (EA=ethylammonium), exhibits conductivity as high as 2×10 −3 S cm −1 at only 2.6 GPa, and 0.17 S cm −1 at 59 GPa. Substitution of higher‐energy Br 4p for Cl 3p orbitals lowers the charge‐transfer band gap of the perovskite by 0.9 eV. This 1.7 eV band gap decreases to 0.3 eV at 65 GPa. High‐pressure X‐ray diffraction, optical absorption, and transport measurements, and density functional theory calculations allow us to track compression‐induced structural and electronic changes. The notable enhancement of the Br perovskite's electronic response to pressure may be attributed to more diffuse Br valence orbitals relative to Cl orbitals. This work brings the compression‐induced conductivity of Cu‐halide perovskites to more technologically accessible pressures.

Jaffe, Adam↗
DOE OSTI2022

Emergence of asymmetric skew-scattering dominated anomalous Nernst effect in the spin gapless semiconductors Co 1+x Fe 1-x CrGa

Heusler alloy-based spin gapless semiconductors (SGSs) with very high Curie temperatures ( T C ) have recently gained enormous attention because of their unconventional electronic structures. They exhibit a nonzero band gap in one of the spin channels and a zero band gap in the other spin channel, making them an important class of materials for tunable spin transport. Here, we report the experimental observation of anomalous Nernst effect (ANE) in Co 1 + x Fe 1 - x CrGa ( x = 0 , 0.2, 0.4, and 0.5), which are the emerging quaternary Heusler alloy-based SGSs. While the electron-electron elastic scattering and the disorder-mediated weak localization effect play the major roles in electrical transport for all the samples at low temperatures, the magnon-drag effect was found to dominate the longitudinal thermoelectric transport. The ANE coefficient at room temperature increases from ≈ 0.018 μ V K - 1 for x = 0 to ≈ 0.063 μ V K - 1 for x = 0.5 , which is higher than that for Ni 81 Fe 19 and compressively strained SrRu O 3 films. Our analysis indicates that the observed ANE in these samples originates from asymmetric skew scattering of charge carriers.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Fermi-Level Engineering of Nitrogen Core-Doped Armchair Graphene Nanoribbons

Substitutional heteroatom doping of bottom-up engineered 1D graphene nanoribbons (GNRs) is a versatile tool for realizing low-dimensional functional materials for nanoelectronics and sensing. Previous efforts have largely relied on replacing C–H groups lining the edges of GNRs with trigonal planar N atoms. This type of atomically precise doping, however, only results in a modest realignment of the valence band (VB) and conduction band (CB) energies. Here, we report the design, bottom-up synthesis, and spectroscopic characterization of nitrogen core-doped 5-atom-wide armchair GNRs (N2-5-AGNRs) that yield much greater energy-level shifting of the GNR electronic structure. Here, the substitution of C atoms with N atoms along the backbone of the GNR introduces a single surplus π-electron per dopant that populates the electronic states associated with previously unoccupied bands. First-principles DFT-LDA calculations confirm that a sizable shift in Fermi energy (∼1.0 eV) is accompanied by a broad reconfiguration of the band structure, including the opening of a new band gap and the transition from a direct to an indirect semiconducting band gap. Scanning tunneling spectroscopy (STS) lift-off charge transport experiments corroborate the theoretical results and reveal the relationship among substitutional heteroatom doping, Fermi-level shifting, electronic band structure, and topological engineering for this new N-doped GNR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Origin of surface and subband states at the InAs(111)A surface

The atomic structure of surfaces and interfaces plays a vital role in the electronic quality and properties of quantum devices. The interplay between the surface and confined bulk subband states in terms of their susceptibility has been investigated in relation to crystal defects on an InAs(111)A-(2×2) reconstructed surface, using low-temperature scanning tunneling microscopy and spectroscopy. We measure the two-dimensional quantized subband states arising from the confined potential imposed by downward bending of the conduction band edge. Furthermore, we show evidence of the existence of surface Bloch states within the confined bulk band gap projected on the surface spectrum which have originated from the surface reconstruction. As expected, larger confined bulk band gaps at the surface and conduction band offset are measured to be 0.58 and 0.31 eV, respectively. Here we further show the scattering of these quantum states at different surface defects and demonstrate that surface states are more susceptible to the defect potential when compared with the corresponding subband states. This apparent contrast follows from the length scale at which these defect potentials actively interact on or near the surface. Our observed experimental results are supported by empirical tight-binding simulations for the subband states and first-principles density functional theory simulations for the surface states present on the surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Single quantum emitters with spin ground states based on Cl bound excitons in ZnSe

Defects in wide-band-gap semiconductors are promising qubit candidates for quantum communication and computation. Epitaxially grown II-VI semiconductors are particularly promising host materials due to their direct band gap and potential for isotopic purification to a spin-zero nuclear background. Here, we show an alternative type of single photon emitter with potential electron spin qubits based on Cl impurities in ZnSe. We utilize a quantum well to increase the binding energies of donor emission and confirm single photon emission with short radiative lifetimes of 192 ps. Furthermore, we verify that the ground state of the Cl donor complex contains a single electron by observing two-electron-satellite emission, leaving the electron in higher orbital states. We also characterize the Zeeman splitting of the exciton transition by performing polarization-resolved magnetic spectroscopy on single emitters. Our results suggest single Cl impurities are suitable as a single photon source with a potential photonic interface.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Realization of Electron Antidoping by Modulating the Breathing Distortion in BaBiO 3

The recent proposal of antidoping scheme breaks new ground in conceiving conversely functional materials and devices; yet, the few available examples belong to the correlated electron systems. Here, we demonstrate both theoretically and experimentally that the main group oxide BaBiO 3 is a model system for antidoping using oxygen vacancies. The first-principles calculations show that the band gap systematically increases due to the strongly enhanced Bi-O breathing distortions away from the vacancies and the annihilation of Bi 6 s /O 2 p hybridized conduction bands near the vacancies. Our further spectroscopic experiments confirm that the band gap increases systematically with electron doping, with a maximal gap enhancement of ~75% when the film's stoichiometry is reduced to BaBiO 2.75 . These results unambiguously demonstrate the remarkable antidoping effect in a material without strong electron correlations and underscores the importance of bond disproportionation in realizing such an effect.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Curated Collection of More than 20,000 Experimentally Reported One-Dimensional Metal–Organic Frameworks

Herein, a collection of more than 20,000 experimentally derived crystal structures for metal–organic frameworks (MOFs) that do not have two- or three-dimensional covalently bonded networks has been developed from the materials available at the Cambridge Crystallographic Data Centre. Of these 20,000 1D MOFs, more than 12,000 structures have been verified to be solvent-free and in exact agreement with the stoichiometry of the synthesized materials. More than 10% of the complete data set comprise materials including two or more distinct metals. The band gaps of more than 12,000 1D MOFs have been computed at the density functional theory-generalized gradient approximation level, finding more than 2000 materials that have a zero band gap. Molecular simulations of CH4 adsorption in a small number of 1D MOFs indicated that adsorbate-induced deformation plays a significant role in determining adsorption isotherms in these materials. As a result, methods that have been used previously for high-throughput predictions of molecular adsorption in 3D MOFs are not suitable for 1D MOFs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synthesis of luminescent core/shell α-Zn 3 P 2 /ZnS quantum dots

Metal chalcogenide nanoparticles offer vast control over their optoelectronic properties via size, shape, composition, and morphology which has led to their use across fields including optoelectronics, energy storage, and catalysis. While cadmium and lead-based nanocrystals are prevalent in applications, concerns over their toxicity have motivated researchers to explore alternate classes of nanomaterials based on environmentally benign metals such as zinc and tin. The goal of this research is to identify material systems that offer comparable performance to existing metal chalcogenide systems from abundant, recyclable, and environmentally benign materials. With band gaps that span the visible through the infrared, II–V direct band gap semiconductors such as tetragonal zinc phosphide (α-Zn 3 P 2 ) are promising candidates for optoelectronics. To date, syntheses of α-Zn 3 P 2 nanoparticles have been hindered because of the toxicity of zinc and phosphorus precursors, surface oxidation, and defect states leading to carrier trapping and low photoluminescence quantum yield. Here, we report a colloidal synthesis of quantum confined α-Zn 3 P 2 nanoparticles from common phosphorus precursor tris(trimethylsilyl)phosphine and environmentally benign zinc carboxylates. Shelling of the nanoparticles with zinc sulfide is shown as a method of preventing oxidation and improving the optical properties of the nanoparticles. These results show a route to stabilizing α-Zn 3 P 2 nanoparticles for optoelectronic device applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Density functional theory of material design: fundamentals and applications—II

Abstract This is the second and the final part of the review on density functional theory (DFT), referred to as DFT-II. In the first review, DFT-I, we have discussed wavefunction-based methods, their complexity, and basics of density functional theory. In DFT-II, we focus on fundamentals of DFT and their implications for the betterment of the theory. We start our presentation with the exact DFT results followed by the concept of exchange-correlation (xc) or Fermi-Coulomb hole and its relationship with xc energy functional. We also provide the exact conditions for the xc-hole, xc-energy and xc-potential along with their physical interpretation. Next, we describe the extension of DFT for non-integer number of electrons, the piecewise linearity of total energy and discontinuity of chemical potential at integer particle numbers, and derivative discontinuity of the xc potential, which has consequences on fundamental gap of solids. After that, we present how one obtains more accurate xc energy functionals by going beyond the LDA. We discuss the gradient expansion approximation (GEA), generalized gradient approximation (GGA), and hybrid functional approaches to designing better xc energy functionals that give accurate total energies. However, these functionals fail to predict properties like the ionization potential and the band gap. Thus, we next describe different methods of modelling these potentials and results of their application for calculation of the band gaps of different solids to highlight accuracy of different xc potentials. Finally, we conclude with a glimpse on orbital-free density functional theory and the machine learning approach.

36 MATERIALS SCIENCE↗
DOE OSTI2022

How to see hidden patterns in metamaterials with interpretable machine learning

Machine learning models can assist with metamaterials design by approximating computationally expensive simulators or solving inverse design problems. However, past work has usually relied on black box deep neural networks, whose reasoning processes are opaque and require enormous datasets that are expensive to obtain. Here, in this work, we develop two novel machine learning approaches to metamaterials discovery that have neither of these disadvantages. These approaches, called shape-frequency features and unit-cell templates, can discover 2D metamaterials with user-specified frequency band gaps. Our approaches provide logical rule-based conditions on metamaterial unit-cells that allow for interpretable reasoning processes, and generalize well across design spaces of different resolutions. The templates also provide design flexibility where users can almost freely design the fine resolution features of a unit-cell without affecting the user’s desired band gap.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Two-dimensional forms of robust CO 2 reduction photocatalysts

Photoelectrocatalysts that use sunlight to power the CO 2 reduction reaction will be crucial for carbon-neutral power and energy-efficient industrial processes. Scalable photoelectrocatalysts must satisfy a stringent set of criteria, such as stability under operating conditions, product selectivity, and efficient light absorption. Two-dimensional materials can offer high specific surface area, tunability, and potential for heterostructuring, providing a fresh landscape of candidate catalysts. From a set of promising bulk CO 2 reduction photoelectrocatalysts, we screen for candidate monolayers of these materials, then study their catalytic feasibility and suitability. For stable monolayer candidates, we verify the presence of visible-light band gaps, check that band edges can support CO 2 reduction, determine exciton binding energies, and compute surface reactivity. We find visible light absorption for SiAs, ZnTe, and ZnSe monolayers, and that due to a lack of binding, CO selectivity is possible. We thus identify SiAs, ZnTe, and ZnSe monolayers as targets for further investigation, expanding the chemical space for CO 2 photoreduction candidates.

36 MATERIALS SCIENCE↗