Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BORANES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Crystal structure of bis(3-bromomesityl)(quinolin-1-ium-8-yl)boron(III) tribromide

The title compound, C 27 H 26.82 BBr 2.18 N + ·Br 3 - , is a cationic triarylborane isolated as its tribromide salt. The aryl substituents include a protonated 8-quinolyl group and two 3-bromomesityl groups. The molecule was prepared on combination of 3:1 Br 2 and dimesityl(quinolin-8-yl)borane in hexanes. The refinement of the structure indicated a degree of `over-bromination' (beyond two bromine atoms) for the cation. There are two tribromide ions in the asymmetric unit, both completed by crystallographic inversion symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Use of B{sub 2}O{sub 3} films grown by plasma-assisted atomic layer deposition for shallow boron doping in silicon

Plasma-assisted atomic layer deposition (PALD) was carried for growing thin boron oxide films onto silicon aiming at the formation of dopant sources for shallow boron doping of silicon by rapid thermal annealing (RTA). A remote capacitively coupled plasma source powered by GaN microwave oscillators was used for generating oxygen plasma in the PALD process with tris(dimethylamido)borane as boron containing precursor. ALD type growth was obtained; growth per cycle was highest with 0.13 nm at room temperature and decreased with higher temperature. The as-deposited films were highly unstable in ambient air and could be protected by capping with in-situ PALD grown antimony oxide films. After 16 weeks of storage in air, degradation of the film stack was observed in an electron microscope. The instability of the boron oxide, caused by moisture uptake, suggests the application of this film for testing moisture barrier properties of capping materials particularly for those grown by ALD. Boron doping of silicon was demonstrated using the uncapped PALD B{sub 2}O{sub 3} films for RTA processes without exposing them to air. The boron concentration in the silicon could be varied depending on the source layer thickness for very thin films, which favors the application of ALD for semiconductor doping processes.

36 MATERIALS SCIENCE↗

Comparison of B{sub 2}O{sub 3} and BN deposited by atomic layer deposition for forming ultrashallow dopant regions by solid state diffusion

In this study, the authors investigated atomic layer deposition (ALD) of B{sub 2}O{sub 3} and BN for conformal, ultrashallow B doping applications and compared the effect of dopant-containing overlayers on sheet resistance (R{sub s}) and B profiles for both types of films subjected to a drive-in thermal anneal. For the deposition of B{sub 2}O{sub 3}, tris(dimethylamido)borane and O{sub 3} were used as coreactants and for the deposition of BN, BCl{sub 3} and NH{sub 3} were used as coreactants. Due to the extreme air instability of B{sub 2}O{sub 3} films, physical analysis was performed on B{sub 2}O{sub 3} films, which were capped in-situ with ∼30 Å ALD grown Al{sub 2}O{sub 3} layers. For the BN films, in-situ ALD grown Si{sub 3}N{sub 4} capping layers (∼30 Å) were used for comparison. From spectroscopic ellipsometry, a thickness decrease was observed after 1000 °C, 30 s anneal for the B{sub 2}O{sub 3} containing stack with 60 ALD cycles of B{sub 2}O{sub 3}, whereas the BN containing stacks showed negligible thickness decrease after the annealing step, regardless of the number of BN cycles tested. The postanneal reduction in film thickness as well as decrease in R{sub s} for the B{sub 2}O{sub 3} containing stack suggests that the solid state diffusion dopant mechanism is effective, whereas for the BN containing stacks this phenomenon seems to be suppressed. Further clarification of the effectiveness of the B{sub 2}O{sub 3} containing layer compared to the film stacks with BN was evidenced in backside secondary ion mass spectrometry profiling of B atoms. Thus, B{sub 2}O{sub 3} formed by an ALD process and subsequently capped in-situ followed by a drive-in anneal offers promise as a dopant source for ultrashallow doping, whereas the same method using BN seems ineffective. An integrated approach for B{sub 2}O{sub 3} deposition and annealing on a clustered tool also demonstrated controllable R{sub s} reduction without the use of a capping layer.

36 MATERIALS SCIENCE↗

Tuning charge balance in PHOLEDs with ambipolar host materials to achieve high efficiency

The efficiency and stability of blue organic light emitting devices (OLEDs) continue to be a primary roadblock to developing organic solid state white lighting. For OLEDs to meet the high power conversion efficiency goal, they will require both close to 100% internal quantum efficiency and low operating voltage in a white light emitting device.1 It is generally accepted that such high quantum efficiency, can only be achieved with the use of organometallic phosphor doped OLEDs. Blue OLEDs are particularly important for solid state lighting. The simplest (and therefore likely the lowest cost) method of generating white light is to down convert part of the emission from a blue light source with a system of external phosphors.2 A second method of generating white light requires the superposition of the light from red, green and blue OLEDs in the correct ratio. Either of these two methods (and indeed any method of generating white light with a high color rendering index) critically depends on a high efficiency blue light component.3 A simple OLED generally consists of a hole-injecting anode, a preferentially hole transporting organic layer (HTL), an emissive layer that contains the recombination zone and ideally transports both holes and electrons, a preferentially electron-transporting layer (ETL) and an electron-injecting cathode. Color in state-of-the-art OLEDs is generated by an organometallic phosphor incorporated by co-sublimation into the emissive layer (EML).4 New materials functioning as hosts, emitters, charge transporting, and charge blocking layers have been developed along with device architectures leading to electrophosphorescent based OLEDs with high quantum efficiencies near the theoretical limit. However, the layers added to the device architecture to enable high quantum efficiencies lead to higher operating voltages and correspondingly lower power efficiencies. Achievement of target luminance power efficiencies will require new strategies for lowering operating voltages, particularly if this is to be achieved in a device that can be manufactured at low cost. To avoid the efficiency losses associated with phosphorescence quenching by back-energy transfer from the dopant onto the host, the triplet excited states of the host material must be higher in energy than the triplet excited state of the dopant.5 This must be accomplished without sacrificing the charge transporting properties of the composite.6 Similar problems limit the efficiency of OLED-based displays, where blue light emitters are the least efficient and least stable. We previously demonstrated the utility of organic phosphine oxide (PO) materials as electron transporting HMs for FIrpic in blue OLEDs.7 However, the high reluctance of PO materials to oxidation and thus, hole injection limits the ability to balance charge injection and transport in the EML without relying on charge transport by the phosphorescent dopant. PO host materials were engineered to transport both electrons and holes in the EML and still maintain high triplet exciton energy to ensure efficient energy transfer to the dopant (Figure 1). There are examples of combining hole transporting moieties (mainly aromatic amines) with electron transport moieties (e.g., oxadiazoles, triazines, boranes)8 to develop new emitter and host materials for small molecule and polymer9 OLEDs. The challenge is to combine the two moieties without lowering the triplet energy of the target molecule. For example, coupling of a dimesitylphenylboryl moiety with a tertiary aromatic amine (FIAMBOT) results in intramolecular electron transfer from the amine to the boron atom through the bridging phenyl. The mesomeric effect of the dimesitylphenylboryl unit acts to extend conjugation and lowers triplet exciton energies (< 2.8 eV) rendering such systems inadequate as ambipolar hosts for blue phosphors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Diverse high-pressure chemistry in Y-NH 3 BH 3 and Y–paraffin oil systems

The yttrium-hydrogen system has gained attention because of near-ambient temperature superconductivity reports in yttrium hydrides at high pressures. We conducted a study using synchrotron single-crystal x-ray diffraction (SCXRD) at 87 to 171 GPa, resulting in the discovery of known (two YH3 phases) and five previously unknown yttrium hydrides. These were synthesized in diamond anvil cells by laser heating yttrium with hydrogen-rich precursors—ammonia borane or paraffin oil. The arrangements of yttrium atoms in the crystal structures of new phases were determined on the basis of SCXRD, and the hydrogen content estimations based on empirical relations and ab initio calculations revealed the following compounds: Y 3 H 11 , Y 2 H 9 , Y 4 H 23 , Y 13 H 75 , and Y 4 H 25 . The study also uncovered a carbide (YC 2 ) and two yttrium allotropes. Complex phase diversity, variable hydrogen content in yttrium hydrides, and their metallic nature, as revealed by ab initio calculations, underline the challenges in identifying superconducting phases and understanding electronic transitions in high-pressure synthesized materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Nonaqueous Electrolytes on the Performance of Primary Lithium/Air Batteries

The factors affecting the cell performance of non-aqueous electrolytes in primary Li/air batteries operated in an ambient environment were investigated. Four organic additives or co-solvents were also evaluated in electrolytes for Li/air batteries. It has been found that the polarity of an electrolyte is a critical factor for the performance of Li/air batteries. This factor overweighs the effects from the viscosity, ionic conductivity, and oxygen solubility of the electrolytes. In addition, the volume of electrolyte added to a cell significantly affects the discharge performance of a Li/air battery. The strong Lewis base tris(pentafluorophenyl)borane reduces the discharge capacity of a Li/air battery even though its ability to dissolve a certain amount of lithium oxide was supposed to improve the cell performance of Li/air batteries. Addition of two crown ethers, 12-crown-4 and 15-crown-5, especially the former one, can significantly improve the discharge performance of the Li/air cells with electrolytes containing about 15% by weight of such compounds as co-solvents. However, addition of 18-crown-6 decreases the cell performance. The differences among the three crown ethers were investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Materials Data on B4CCl6O by Materials Project

BCO(BCl2)3 crystallizes in the trigonal R3m space group. The structure is zero-dimensional and consists of three (hydroxymethyl)borane molecules and nine dichloroborane molecules.

36 MATERIALS SCIENCE↗

Materials Data on B4COF6 by Materials Project

BCO(BF2)3 is beta Plutonium-like structured and crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of eight (hydroxymethyl)borane molecules and twenty-four difluoroborane molecules.

36 MATERIALS SCIENCE↗

Materials Data on BH3 by Materials Project

BH3 crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of two borane molecules. B3- is bonded to four H1+ atoms to form edge-sharing BH4 tetrahedra. There are a spread of B–H bond distances ranging from 1.19–1.32 Å. There are three inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one B3- atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one B3- atom. In the third H1+ site, H1+ is bonded in an L-shaped geometry to two equivalent B3- atoms.

36 MATERIALS SCIENCE↗

Materials Data on BH2CO by Materials Project

BCH2O crystallizes in the monoclinic C2/c space group. The structure is zero-dimensional and consists of eight (hydroxymethyl)borane molecules. B3+ is bonded in a trigonal non-coplanar geometry to one C3- and two H1+ atoms. The B–C bond length is 1.49 Å. Both B–H bond lengths are 1.21 Å. C3- is bonded in a linear geometry to one B3+ and one O2- atom. The C–O bond length is 1.15 Å. There are two inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one B3+ atom. In the second H1+ site, H1+ is bonded in a single-bond geometry to one B3+ atom. O2- is bonded in a single-bond geometry to one C3- atom.

36 MATERIALS SCIENCE↗

Materials Data on B3H7CO by Materials Project

B2H5BCH2O crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of two (hydroxymethyl)borane molecules and two B2H5 clusters. In each B2H5 cluster, there are two inequivalent B1+ sites. In the first B1+ site, B1+ is bonded in a trigonal non-coplanar geometry to three H+0.43+ atoms. There are a spread of B–H bond distances ranging from 1.20–1.33 Å. In the second B1+ site, B1+ is bonded in a trigonal non-coplanar geometry to three H+0.43+ atoms. There is two shorter (1.20 Å) and one longer (1.32 Å) B–H bond length. There are five inequivalent H+0.43+ sites. In the first H+0.43+ site, H+0.43+ is bonded in a single-bond geometry to one B1+ atom. In the second H+0.43+ site, H+0.43+ is bonded in a single-bond geometry to one B1+ atom. In the third H+0.43+ site, H+0.43+ is bonded in an L-shaped geometry to two B1+ atoms. In the fourth H+0.43+ site, H+0.43+ is bonded in a single-bond geometry to one B1+ atom. In the fifth H+0.43+ site, H+0.43+ is bonded in a single-bond geometry to one B1+ atom.

36 MATERIALS SCIENCE↗

Materials Data on B2NCl3 by Materials Project

B2NCl3 crystallizes in the tetragonal P4_12_12 space group. The structure is zero-dimensional and consists of four dichloro-[2,4,6-trichloro-3,5-bis(dichloroboranyl)-1,3,5,2,4,6-triazatriborinan-1-yl]borane molecules. there are four inequivalent B3+ sites. In the first B3+ site, B3+ is bonded in a trigonal planar geometry to two equivalent N3- and one Cl1- atom. Both B–N bond lengths are 1.44 Å. The B–Cl bond length is 1.77 Å. In the second B3+ site, B3+ is bonded in a trigonal planar geometry to one N3- and two equivalent Cl1- atoms. The B–N bond length is 1.48 Å. Both B–Cl bond lengths are 1.75 Å. In the third B3+ site, B3+ is bonded in a trigonal planar geometry to two N3- and one Cl1- atom. Both B–N bond lengths are 1.44 Å. The B–Cl bond length is 1.77 Å. In the fourth B3+ site, B3+ is bonded in a trigonal planar geometry to one N3- and two Cl1- atoms. The B–N bond length is 1.48 Å. Both B–Cl bond lengths are 1.75 Å. There are two inequivalent N3- sites. In the first N3- site, N3- is bonded in a trigonal planar geometry to three B3+ atoms. In the second N3- site, N3- is bonded in a trigonal planar geometry to three B3+ atoms. There are five inequivalent Cl1- sites. In the first Cl1- site, Cl1- is bonded in a single-bond geometry to one B3+ atom. In the second Cl1- site, Cl1- is bonded in a single-bond geometry to one B3+ atom. In the third Cl1- site, Cl1- is bonded in a single-bond geometry to one B3+ atom. In the fourth Cl1- site, Cl1- is bonded in a single-bond geometry to one B3+ atom. In the fifth Cl1- site, Cl1- is bonded in a single-bond geometry to one B3+ atom.

36 MATERIALS SCIENCE↗

Technical Report (Final): Development of Solid State Reagents for Preparing Radiolabeled Imaging Agents

The goal of this research was on the development of new, rapid, and efficient synthetic methods for incorporating short-lived radionuclides into agents of use in measuring dynamic processes. The initial project period (Year 1) was focused on the preparation of stable, solid state precursors that could be used to efficiently incorporate short-lived radioisotopes into small molecules of use in biological applications (environmental, plant, and animal). The investigation included development and evaluation of new methods for preparing carbon-carbon and carbon-halogen bonds for use in constructing the substrates to be radiolabeled. The second phase (Year 2) was focused on developing isotope incorporation techniques using the stable, boronated polymeric precursors. The final phase (Year 3), was focused on the preparation of specific radiolabeled agents and evaluation of their biodistribution using micro-PET and micro-SPECT. In addition, we began the development of a new series of polymeric borane reagents based on polyethylene glycol backbones.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

In-Situ Neutron Diffraction Studies of Complex Hydrogen Storage Materials

The thrust of this project was to investigate the structures of important materials with potential application to hydrogen storage, in an effort to meet the DOE goals for 2010 and 2015, namely 9% (wt) and 15% (wt) respectively. Unfortunately, no material has been found, despite the efforts of many laboratories, including our own, that achieves these goals in a reversible complex hydride such as ammonia borane (NH 4 BH 4 ), and other ammonia based compounds, or with light hydrides such as LiBH 4 , due either to their irreversibility or to the high decomposition temperatures and residual simple hydrides such as LiH from the decomposition of the last named compound.

08 HYDROGEN↗

From Fundamental Understanding To Predicting New Nanomaterials For High Capacity Hydrogen/Methane Storage and Carbon Capture

On-board hydrogen/methane storage in fuel cell-powered vehicles is a major component of the national need to achieve energy independence and protect the environment. The main obstacles in hydrogen storage are slow kinetics, poor reversibility and high dehydrogenation temperatures for the chemical hydrides; and very low desorption temperatures/energies for the physisorption materials (MOF’s, porous carbons). Similarly, the current methane storage technologies are mainly based on physisorption in porous materials but the gravimetric and volumetric storage capacities are below the target values. Finally, carbon capture, a critical component of the mitigation of CO 2 emissions from industrial plants, also suffers from similar problems. The solid-absorbers such as MOFs are either not stable against real flue-gas conditions and/or do not have large enough CO 2 capture capacity to be practical and cost effective. In this project, we addressed these challenges using a unique combination of computational, synthetic and experimental methods. The main scope of our research was to achieve fundamental understanding of the chemical and structural interactions governing the storage and release of hydrogen/methane and carbon capture in a wide spectrum of candidate materials. We studied the effect of scaffolding and doping of the candidate materials on their storage and dynamics properties. We reviewed current progress, challenges and prospect in closely related fields of hydrogen/methane storage and carbon capture. For example, for physisorption based storage materials, we show that tap-densities or simply pressing MOFs into pellet forms reduce the uptake capacities by half and therefore packing MOFs is one of the most important challenges going forward. For room temperature hydrogen storage application of MOFs, we argue that MOFs are the most promising scaffold materials for Ammonia-Borane (AB) because of their unique interior active metal-centers for AB binding and well defined and ordered pores. Here the main challenge is to find a chemically stable MOF required for regeneration of the AB-spent fuel. Finally, for carbon capture application of MOFs, we investigate the performance of a number of metal–organic frameworks with particular focus on their behavior at the low pressures commonly used in swing adsorption. This comparison clearly shows that it is the process that determines which MOF is optimal rather than there being one best MOF, though MOFs that possess enhanced binding at open metal sites generally perform better than those with high surface area.

03 NATURAL GAS↗

Advancement of Systems Designs and Key Engineering Technologies for Materials Based Hydrogen Storage

UTRC lead the development of the Simulink Framework model that enables a comparison of different hydrogen storage systems on a common basis. The Simulink Framework model was disseminated on the www.HSECoE.org website that is hosted by NREL. UTRC contributed to a better understanding of the safety aspects of the proposed hydrogen storage systems. UTRC also participated in the Failure Mode and Effect Analysis of both the chemical- and the adsorbent-based hydrogen storage system during Phase 2 of the Hydrogen Storage Engineering Center of Excellence. UTRC designed a hydrogen storage system with a reversible metal hydride material in a compacted form for light-duty vehicles with a 5.6 kg H2 storage capacity, giving it a 300 miles range. It contains a heat exchanger that enables efficient cooling of the metal hydride material during hydrogen absorption in order to meet the 3.3 minute refueling time target. It has been shown through computation that the kinetics of hydrogen absorption of Ti-catalyzed NaAlH4 was ultimately limiting the rate of hydrogen absorption to 85% of the material capacity in 3.3 minutes. An inverse analysis was performed in order to determine the material property requirements in order for a metal hydride based hydrogen storage system to meet the DOE targets. Work on metal hydride storage systems was halted after the Phase 1 to Phase 2 review due to the lack of metal hydride materials with the required material properties. UTRC contributed to the design of a chemical hydrogen storage system by developing an adsorbent for removing the impurity ammonia from the hydrogen gas, by developing a system to meter the transport of Ammonia Borane (AB) powder to a thermolysis reactor, and by developing a gas-liquid-separator (GLS) for the separation of hydrogen gas from AB slurry in silicone oil. Stripping impurities from hydrogen gas is essential for a long life of the fuel cell system on board of a vehicle. Work on solid transport of AB was halted after the Phase 1 to Phase 2 review in favor of studying the slurry-form of AB as it appeared to be difficult to transport a solid form of AB through the thermolysis reactor. UTRC demonstrated the operation of a compact GLS in the laboratory at a scale that would be required for the actual automotive application. The GLS met the targets for weight and volume. UTRC also reported about the unresolved issue associated with the high vapor pressure of fluids that could be used for making a slurry-form of AB. Work on the GLS was halted after the Phase 2 to Phase 3 review as the off-board regeneration efficiency of the spent AB was below the DOE target of 60%. UTRC contributed to the design of an adsorbent-based hydrogen storage system through measurements of the thermal conductivity of a compacted form of Metal Organic Framework (MOF) number 5 and through the development and sizing of a particulate filter. Thermal conductivity is important for the design of the modular adsorbent tank insert (MATI), as developed by Oregon State University (OSU), in order to enable a rapid refueling process. Stringent hydrogen quality requirements can only be met with an efficient particulate filtration system. UTRC developed a method to size the particulate filter by taking into account the effect of the pressure drop on the hydrogen adsorption process in the tank. UTRC raised awareness about the potential use of materials-based H2 storage systems in applications outside the traditional light-duty vehicle market segment by presenting at several conferences about niche application opportunities in Unmanned Aerial Vehicles (UAV), Autonomous Underwater Vehicles (AUV), portable power and others.

08 HYDROGEN↗

Boron-Based Hydrogen Storage: Ternary Borides and Beyond

DOE continues to seek reversible solid-state hydrogen materials with hydrogen densities of ≥11 wt% and ≥80 g/L that can deliver hydrogen and be recharged at moderate temperatures (≤100 °C) and pressures (≤100 bar) enabling incorporation into hydrogen storage systems suitable for transportation applications. Boron-based hydrogen storage materials have the potential to meet the density requirements given boron’s low atomic weight, high chemical valance, and versatile chemistry. However, the rates of hydrogen exchange in boron-based compounds are thus far much too slow for practical applications. Although contributing to the high hydrogen densities, the high valance of boron also leads to slow rates of hydrogen exchange due to extensive boron-boron atom rearrangements during hydrogen cycling. This rearrangement often leads to multiple solid phases occurring over hydrogen release and recharge cycles. These phases must nucleate and react with each other across solid-solid phase boundaries leading to energy barriers that slow the rates of hydrogen exchange. This project sought to overcome the slow rates of hydrogen exchange in boron-based hydrogen storage materials by minimizing the number of solid phases and the boron atom rearrangement over a hydrogen release and recharge cycle. Two novel approaches were explored: 1) developing matched pairs of ternary borides and mixed-metal borohydrides that could exchange hydrogen with only one hydrogenated phase (the mixed-metal borohydride) and only one dehydrogenated phase (the ternary boride); and 2) developing boranes that could release hydrogen by being lithiated using lithium hydride with no boron-boron atom rearrangement.

08 HYDROGEN↗

Understanding Novel Lewis Acid Doping Mechanisms in Organic Semiconductors

Recent studies supported by this DOE grant have provided a more detailed understanding of the doping mechanism of organic semiconductors by the Lewis acid, tris(pentafluorophenyl)borane (BCF). Our studies have examined the intermolecular semiconductor-dopant interactions as well as the thermodynamic feasibility of different doping mechanisms. Most notably, we found a different proposed doping scheme is much more thermodynamically favoured (exergonic) than our proposed two-step BCF doping mechanism. The state-of-the-art experimental and theoretical techniques of High-Field Multi-Dimensional Solid State NMR spectroscopy and Time-Dependent Density Functional theory (TD-DFT) and DFT were employed in this work. The data obtained helped identify the structural details and intermolecular interactions which impact the organic semiconductor doping efficiency for BCF and how these compare to the case of doping by the standard integer charge transfer dopant molecule F 4 TCNQ. We have, for the first time, assigned specific chemical shift values for the F 4 TCNQ molecules clustered outside of polymer chains as well as those intercalated between the polymer backbones. Further, we provide theoretical support for a novel doping mechanism which combines those proposed in previous literature involving the evolution of hydrogen gas along with a doping species more complex than the simple BCF·H 2 O. While our previously proposed doping mechanism was found to be highly thermodynamically unfavorable, the formation of large anion [BCF(OH)(OH 2 )BCF]- is the key change making the proposed mechanism exergonic while the elimination of gaseous H 2 helps drive the doping reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗