Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Morphology-dependent phase transformation of y-Al2O3

The phase transformations of platelet- and rod-shaped ?-Al2O3 were investigated and compared to that of a commercial sample by XRD, BET surface area measurements, Transmission Electron Microscopy (TEM), solid state 27Al-NMR and ethanol temperature programmed desorption (TPD) after sequential annealing in air up to 1100 oC. After annealing at 1100 oC, commercial ?-Al2O3 mostly transformed into a-Al2O3 with drastic surface area reduction (from 200 m2/g to 25 m2/g). Interestingly, platelet- and rod-shaped ?-Al2O3 which showed exactly the same XRD patterns transformed into different phases upon the high temperature calcinations. Platelet-shaped ?-Al2O3 transformed into ?-phase while the rod-shaped ?-Al2O3 transformed into the d-phase and not to the a-polymorph. Both platelet- and rod-shaped aluminas retained significantly higher surface area (~60 m2/g) than the commercial one after the same treatment at 1100 oC. These results suggest that the phase transformation in ?-Al2O3 is strongly affected by not only the crystal structure of the starting material, but its morphology as well. Ethanol TPD from platelet- and rod-shaped alumina after 1100 oC annealing, showed significantly different desorption profiles which suggest different surface characteristics even though they had almost the same surface areas. These different phase transformations were also supported by solid state 27Al-NMR. After 1100oC annealing commercial alumina showed the presence of mostly octahedral Al3+ ions, but the other two samples displayed even higher number of tetrahedral Al3+ ions than the initial ?-Al2O3. Morphological changes were also confirmed by TEM. All these results consistently suggest the morphology-dependent phase transformations of ?-Al2O3 and the improved thermal stability of platelet- and rod- shaped ?-Al2O3 in comparison to a commercial ?-Al2O3. J.Sz. acknowledges the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences & Biosciences for the support of this work.

Lee, Jaekyoung↗

Multi-objective sizing and dispatch for building thermal and battery storage towards economic and environmental synergy

The role of building thermal and battery storage is pivotal in advancing smart cities and achieving sustainability goals through effective energy management. Despite their significance, there are several limitations in the sizing approach and value stream analysis with various objectives for their widespread adoption in buildings. This work proposes a flexible and scalable multi-objective optimization framework for optimal sizing and dispatch of building thermal and battery storage, addressing conflicting objectives simultaneously using mixed-integer linear programming. The weighted-sum method is adapted, combining multiple objectives into a single function. The two-stage procedure iterates over different weights, generating optimal solutions and forming the Pareto front. Case studies are performed to assess the energy, economic, and environmental benefits of building energy storage systems for a large office building in three climate locations. The results demonstrate that the proposed framework efficiently determines optimal sizing and dispatch strategies, addressing the balance between economic viability and emission reduction. The dynamic relationship between time-of-use energy charges and emission factors leads to significantly different strategies based on whether economic or environmental concerns are prioritized. This research enhances our understanding of the benefits of TES and BES systems in buildings, providing valuable guidance to stakeholders.

25 ENERGY STORAGE↗

Integration of renewable energy generation and storage systems for emissions reduction in an islanded campus microgrid

Microgrid connected building communities are projected to play an integral part in the clean energy transition. These types of systems, when integrated with distributed energy resources (DERs) such as combined heat and power (CHP), district heating and cooling, renewable generation, and energy storage, can provide clean, reliable power to critical facilities and vulnerable communities. The intermittent nature of renewable generation is a challenge when integrating renewables into any grid system, but particularly in islanded microgrids. The University of Texas at Austin (UT) operates an islanded microgrid powered by a CHP plant, while also utilizing district heating and cooling systems and thermal energy storage (TES). High fidelity operating data was used to develop a validated reduced order model of UT’s integrated campus energy systems to serve as a testbed for use in a case study. Hypothetical renewable energy installations on land owned by UT in west Texas were modeled and integrated into the validated campus models along with battery energy storage (BES). Simulations showed that a combination of renewable energy from wind, and optimally controlled 24-hour thermal and battery storage systems could reduce carbon dioxide emissions on campus by 45.4%. The additional retrofit of burner systems to utilize hydrogen natural gas blends resulted in an overall annual emissions reduction of 54.7%. Carbon capture and storage eliminated the majority of the remaining emissions with increased plant energy expenditure. The presented simulations display the practical limitations of a CHP system complemented by renewable generation and short-term storage in eliminating emissions. Furthermore, results highlight the need for further research and development in long duration storage technologies and hydrogen fueled turbines to increase penetration of renewable energy and reduce emissions.

CHP↗

Thermodynamics and Kinetics of Na+/K+-Formate Ion Pairs Association in Polarizable Water: A Molecular Dynamics Study

To elevate our understanding of ion specific activity in biological systems, the potential of mean force approach was utilized to study solvent effects on interactions between two alkali cations (Na+ and K+) with a formate anion in water. A very complex free energy landscape was observed, much more so than alkali-halide ion pairs. Furthermore, stronger binding between the Na+-formate pair was found in comparison to the K+-formate pair in water, a finding that agrees with experimental and theoretical studies of these systems. The kinetics of ion-pair interconversions were studied using transition rate theory, along with a variety of theoretical approaches such as the Kramers and Grote Hynes theories. These rate results were used to predict solvent effects on dynamical features of contact ion-pair association, in which faster dynamics were found for K+-formate pairs than for Na+-formate pairs. This work was supported by the U.S. Department of Energy (DOE), Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences. Pacific Northwest National Laboratory is a multiprogram national laboratory operated for DOE by Battelle.

Nguyen, Phuong T↗

Approaching Multiplet Splitting in X-Ray Photoelectron Spectra by Density Functional Theory Methods: NO and O2 Molecules as Examples

The ability of density functional theory (DFT) based methods to predict the multiplet splitting arising from the core hole ionization of molecules such as NO and O2, exhibiting an open shell grounds state, is explored. In the NO molecule, N(1s) or O(1s) ionization leads to 3? and 1? multiplets whereas for O2, the presence of an O(1s) core hole leads to doublet and quartet multiplets with distinct BEs. Multiplet splittings obtained using different exchange-correlation functionals show an overall good agreement with experiment and minor variations within the functionals studied when spin contamination resulting from unrestricted DFT calculations is accounted for.

Sousa, Carme↗

Building energy simulation coupled with CFD for indoor environment: A critical review and recent applications

This paper presents a comprehensive review of the open literature on motivations, methods and applications of linking stratified airflow simulation to building energy simulation (BES). First, we reviewed the motivations for coupling prediction models for building energy and indoor environment. This review classified various exchanged data in different applications as interface data and state data, and found that choosing different data sets may lead to varying performance of stability, convergence, and speed for the co-simulation. Second, our review shows that an external coupling scheme is substantially more popular in implementations of co-simulation than an internal coupling scheme. The external coupling is shown to be generally faster in computational speed, as well as easier to implement, maintain and expand than the internal coupling. Third, the external coupling can be carried out in different data synchronization schemes, including static coupling and dynamic coupling. In comparison, the static coupling that performs data exchange only once is computationally faster and more stable than the dynamic coupling. However, concerning accuracy, the dynamic coupling that requires multiple times of data exchange is more accurate than the static coupling. Furthermore, the review identified that the implementation of the external coupling can be achieved through customized interfaces, middleware, and standard interfaces. The customized interface is straightforward but may be limited to a specific coupling application. The middleware is versatile and user-friendly but usually limited in data synchronization schemes. The standard interface is versatile and promising, but may be difficult to implement. Current applications of the co-simulation are mainly energy performance evaluation and control studies. Finally, we discussed the limitations of the current research and provided an overview for future research.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Real-time plasma monitoring framework for advanced plasma control and ML-research in DIII-D

Real-time and adaptive plasma control is crucial for robust tokamak operation, requiring sensitivity and tolerance measurements of the plasma state. This paper presents the implementation of an integrated real-time plasma monitoring framework on the DIII-D tokamak to support advanced control approaches, including machine-learning (ML) methods. The system is built on the SHIELD framework, a high-performance modular architecture that provides a unified pipeline for integrating diverse diagnostics. The framework leverages high-bandwidth digitizers, fast numerical processing, and deterministic, low-latency interconnects to stream high-fidelity data from diagnostics such as electron cyclotron emission (ECE), beam emission spectroscopy (BES), CO interferometers, and a visible tangential divertor camera (TangTV). The system’s validity is demonstrated through direct comparisons of real-time and offline data. Furthermore, we present two key applications of the developed plasma monitoring system with ML-based plasma control strategies, including real-time divertor detachment and active Alfvén Eigenmode control. As a result, this work presents a robust and scalable approach for integrating high-frequency, multidimensional diagnostics into advanced control algorithms for future fusion devices.

AI/ML↗

The high level trigger and express data production at STAR

To meet the demands of the Beam Energy Scan phase-II (BES-II) program, the STAR experiment at the Relativistic Heavy Ion Collider (RHIC) developed a dual real-time framework consisting of a High Level Trigger (HLT) and an Express Data Production system (xProduction). The HLT operates online within the Data Acquisition (DAQ) chain on a dedicated multi-core CPU cluster with the option to offload compute-intensive kernels to Xeon Phi coprocessors. It uses parallelized algorithms, such as the Cellular Automaton (CA) Track Finder, to perform rapid tracking, vertexing, and event filtering. This allows it to select events of interest in real time and provide immediate feedback on detector and beam conditions. In contrast, the xProduction workflow runs concurrently and independently of the DAQ loop. It applies near offline-quality calibration and reconstruction within hours of data collection. The xProduction input is the express data stream, whose content can be enriched by HLT trigger/priority selections under DAQ/HLT resource constraints, and it uses the STAR calibration/conditions framework, incorporating online calibration/QA information when available. This enables early preliminary physics analysis, including the reconstruction of rare signals, such as hyperons and hypernuclei. It also provides collaboration-wide access to analysis-ready datasets. Together, the HLT and xProduction systems form a complementary architecture: the HLT performs online event selection while the xProduction chain delivers high-quality results within a short amount of time. This integrated framework has enabled the prompt reconstruction of the $^5_Λ$ He hypernucleus with high statistical significance and the efficient processing of hundreds of millions of heavy-ion collision events. In conclusion, its demonstrated scalability and robustness establish a model for future high-luminosity experiments requiring both online event filtering and rapid access to analysis-quality data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Higher order cumulants of net baryon-number distributions at non-zero μ

Using recent results on higher order cumulants of conserved charge fluctuations from lattice QCD, we construct mean, variance, skewness, kurtosis, hyper-skewness and hyper-kurtosis of net-baryon number distributions for small baryon chemical potentials μ B . For the strangeness neutral case ( μ S = 0) at fixed ratio of electric charge to baryon number density ( n Q n B = 0.4 ), which is appropriate for a comparison with heavy ion collisions, we present results for κ B σ 2 B , S B σ 3 B / M B , κ H B σ 4 B and S H B σ 5 B / M B on the crossover line for the chiral transition, T pc ( μ B ). Furthermore, continuum extrapolations for this pseudo-critical transition line have recently been reported by HotQCD up to baryon chemical potentials μ B ≃ 300 MeV [A. Bazavov, et al., Chiral crossover in QCD at zero and non-zero chemical potentials, Phys. Lett. B 795 (2019) 15–21. arXiv:1812.08235 .]. These cumulant ratios are of direct relevance for comparisons with corresponding ratios measured by STAR in the BES-I and II runs at beam energies s NN ≥ 20 GeV . In particular, we point out that recent high statistics results on skewness and kurtosis of net-baryon number distributions obtained by STAR at s NN = 54.4 GeV put strong constraints on freeze-out parameters and are consistent with predictions from thermal QCD.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Chemical freeze-out parameters of net-kaons in heavy-ion collisions

In this work, we study chemical freeze-out parameters for heavy-ion collisions by performing two different thermal analyses. We analyze results from thermal fits for particle yields, as well as, net-charge fluctuations in order to characterize the chemical freeze-out. The Hadron Resonance Gas (HRG) model is employed for both methods. By separating the light hadrons from the strange hadrons in thermal fits, we study the proposed flavor hierarchy. For the net-charge fluctuations, we calculate the mean-over-variance ratio of the net-kaon fluctuations in the HRG model at the five highest energies of the RHIC Beam Energy Scan (BES) for different particle data lists. We compare these results with recent experimental data from the STAR collaboration in order to extract sets of chemical freeze-out parameters for each list. We focused on particle lists which differ largely in the number of resonant states. By doing so, our analysis determines the effect of the amount of resonances included in the HRG model on the freeze-out conditions. Our findings have potential impact on various other models in the field of relativistic heavy ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

STAR Highlights

In this overview talk, I have represented STAR to highlight the results of 19 parallels talks and 38 posters at this Quark Matter Conference. Overall, the contents have 8 major categories: 1. experimental measurements related to the BreitWheeler process and vacuum birefringence; 2. probes of initial states of heavy-ion collisions (parton distribution function and azimuthal correlations in small systems); 3. constraints on temperature-dependent viscosity (η/s(T)) with multiple flow harmonics and rapidity correlations; 4. hard probes using jet structures and heavy flavors; 5. exploration of the origin of global polarization and vorticity; 6. chiral and thermal properties of the QGP; 7. Beam Energy Scan (BES) and the critical point search; 8. upgrades and summary.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Collision-energy dependence of deuteron cumulants and proton-deuteron correlations in Au+Au collisions at RHIC

We report the first measurements of cumulants, up to 4th order, of deuteron number distributions and proton-deuteron correlations in Au+Au collisions recorded by the STAR experiment in phase-I of Beam Energy Scan (BES) program at the Relativistic Heavy Ion Collider. Deuteron cumulants, their ratios, and proton-deuteron mixed cumulants are presented for different collision centralities covering a range of center-of-mass energy per nucleon pair $\sqrt{s_{NN}} = 7.7$ to 200 GeV. It is found that the cumulant ratios at lower collision energies favor a canonical ensemble over a grand canonical ensemble in thermal models. An anti-correlation between proton and deuteron multiplicity is observed across all collision energies and centralities, consistent with the expectation from global baryon number conservation. The UrQMD model coupled with a phase-space coalescence mechanism qualitatively reproduces the collision-energy dependence of cumulant ratios and proton-deuteron correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Diverse Nature of Ion Speciation at the Nanoscale Hydrophobic/Water Interface

Herein we investigate ion pairing at weakly charged hydrophobic/water interfaces. In particular, the speciation of the thiocyanate (SCN-) ion in the vicinity of the nano aqueous (NaSCN solution) - hydrophobic (dodecane) interface in the presence of tetraalkylammonium groups attached to dodecyl chains (DTA+). This combined simulation and experimental approach finds that the SCN- interfacial ion pairs already form at concentrations as low as 5 mM and exist in three distinct, detectable structural motifs controlled by the SCN- concentration in the aqueous phase. The first is the association with the DTA+, followed by hydrophobic adsorption to the interface with the sulfur end of the SCN-, followed by an oppositely aligned SCN- absorption with a solvated nitrogen end of the SCN-. These different structures are formed due to subtle shifts in interactions and their elucidation requires multiple surface sensitive measurements in conjunction with the description of the interface using a representation of the interactions with quantum density functional theory (DFT). Together, this study reveals that we can both simultaneously control and detect subtle changes in the speciation of ions in the vicinity of soft interfaces. This work is supported by the Julia Jacobi Foundation and the European Research Council (grant number 616305). Christopher J. Mundy is supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES) Division of Chemical Sciences, Geosciences, and Biosciences. Marcel D. Baer is supported within the Materials Synthesis and Simulation Across Scales (MS3) Initiative through the Laboratory Research and Development Program at Pacific Northwest National Laboratory (PNNL). The calculations utilized resources of the National Energy Research Scientific Computing Center, a DOE Office of Science User Facility supported by the Office of Science of the US DOE under Contract No. DE-AC02-05CH11231. PNNL is a multiprogram national laboratory operated by Battelle for the US DOE.

Zdrali, Evangelia↗

XPS on Li-Battery-Related Compounds: Analysis of Inorganic SEI Phases and a Methodology for Charge Correction

Accurate identification of chemical phases associated with the electrode and solid-electrolyte interphase (SEI) is critical for understanding and controlling interfacial degradation mechanisms in lithium-containing battery systems. To study these critical battery materials and interfaces X-ray photoelectron spectroscopy (XPS) is a widely used technique that provides quantitative chemical insights. However, due to the fact that a majority of chemical phases relevant to battery interfaces are poor electronic conductors, phase identification that relies primarily on absolute XPS core-level binding-energies (BEs) can be problematic. Charging during XPS measurements leads to BE shifts that can be difficult to correct. These difficulties are often exacerbated by the coexistence of multiple Li-containing phases in the SEI with overlapping XPS core levels. To facilitate accurate phase identification of battery-relevant phases (and electronically insulating phases in general), we propose a straightforward approach for removing charging effects from XPS data sets. We apply this approach to XPS data sets acquired from six battery-relevant inorganic phases including lithium metal (Li0), lithium oxide (Li 2 O), lithium peroxide (Li 2 O 2 ), lithium hydroxide (LiOH), lithium carbonate (Li 2 CO 3 ), and lithium nitride (Li 3 N). Specifically, we demonstrate that BE separations between core levels present in a particular phase (e.g., BE separation between the O 1s and Li 1s core levels in Li 2 O) provide an additional constraint that can significantly improve reliability of phase identification. For phases like Li 2 O 2 and LiOH where the Li-to-O ratios and BE separations are nearly identical, X-ray excited valence-band spectra can provide additional clues that facilitate accurate phase identification. To accurately identity the phases in this study, we show that in situ growth of Li 2 O on Li 0 provides a means for determining absolute core-level positions, where all charging effects can be accurately removed. Finally, as an exemplary case we apply the charge-correction methodology to XPS data acquired from a symmetric cell based on a Li 2 S-P 2 S 5 solid electrolyte. This analysis demonstrates that accurately accounting for XPS BE shifts as a function of current-bias conditions can provide a direct probe of ionic conductivities associated with battery materials.

25 ENERGY STORAGE↗

Cesium Induced Changes in the Acid-Base Properties of Metal Oxides and the Consequences for Methanol Thiolation

Cs+ modified ?-alumina, titania anatase and zirconia in the absence of WS2 are active catalysts for methanol thiolation. Pyridine and CO adsorption via IR show that Cs+ cations induce higher concentrations and strength of base sites. Reaction rates are similar on all three catalysts, indicating that the Cs+ cations are part of the dominating active sites. Methanol thiolation shows similar apparent activation energies, decreasing with Cs+ concentration. Reaction orders close to 0.5 for both reactants suggest that all three metal oxides and their alkali-metal modified counterparts follow the identical base-catalyzed Langmuir-Hinshelwood mechanism. A reaction between the surface alcoholate and the corresponding sulfhydryl groups is hypothesized to be the pathway for reaction. The authors would like to thank SAINT-GOBAIN NorPro for providing the ZrO2 materials, used in this work. RBD would like to thank the Alexander von Humboldt foundation for financial support. J.A.L. was supported by the U.S. Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences and Biosciences (Transdisciplinary Approaches to Realize Novel Catalytic Pathways to Energy Carriers, FWP 47319).

lewis acid base pairs, metal oxide, alkaline modif↗

Satellite-Dominated Sulfur L 2,3 X-ray Emission of Alkaline Earth Metal Sulfides

The sulfur L 2,3 X-ray emission spectra of the alkaline earth metal sulfides BeS, MgS, CaS, SrS, and BaS are investigated and compared with spectra calculations based on density functional theory. Very distinct spectral shapes are found for the different compounds. With decreasing electronegativity of the cation, that is, increasing ionic bonding character, the upper valence band width and its relative spectral intensity decrease. These general trends are qualitatively reproduced by the spectra calculations, which give quite an accurate description of the spectral shapes in the upper valence band region. On the low energy side of the sulfur 3s → 2p transition dominating the spectra, we find strong satellites caused by "semi-Auger" decays involving configuration interaction. These satellites, previously believed to be energetically forbidden for sulfur L 2,3 emission and only observed for the L 2,3 emission of Cl to Cr, increase in intensity as the bonding character becomes more ionic and dominate the spectra for SrS and BaS. The intensities, energies, and widths of the satellites vary strongly between the investigated compounds, giving a very specific spectral fingerprint that can be used for speciation analysis.

36 MATERIALS SCIENCE↗

State of Supported Pd during Catalysis in Water

In operando X-ray absorption was used to measure the structure and chemical state of supported Pd nanoparticles with 3 -10 nm diameter in contact with H2 saturated water at 298-473 K. The Pd-Pd distances determined were consistent with the presence of subsurface hydrogen, i.e., longer than those measured by others for bare, reduced Pd particles, and within the range of distances for Pd hydrides. During the Pd-catalyzed hydrogenation of phenol, cyclohexanone, cyclohexanol or cyclohexene in the presence of water, the Pd nanoparticles exhibited a lengthening of the Pd-Pd bond that we attribute to a change in the concentration of sorbed H related to the steady state of H at the surface of the Pd particles. This steady state is established by all reactions involving H2, i.e., the sorption/desorption into the bulk, the sorption at the surface, and the reaction with adsorbed unsaturated reactants. Thus, first insight into the chemical state of Pd and the H/Pd ratio during catalysis in water is provided. The Pd particles did not change upon their exposure to water or reactants; nor did the spectra show any effect from the interaction of the Pd particles with various supports. The experimental results are consistent with ab initio molecular dynamic simulations, which indicate that Pd-water interactions are relatively weak for Pd metal and that these interactions become even weaker, when hydrogen is incorporated into the metal particles. This work was supported by the US Department of Energy (DOE), Office of Basic Energy Sciences (BES), Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory is a multi-program national laboratory operated for DOE by Battelle through Contract DE-AC05-76RL01830.

hydrodeoxygenation↗