SEARCH · Engineering Papers

Results for “BEAMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

All sources NASA NTRS DOE OSTI

NASA NTRS1986

Large Deformation Dynamic Bending of Composite Beams

Studies were conducted on the large deformation response of composite beams subjected to a dynamic axial load. The beams were loaded with a moderate eccentricity to promote bending. The study was primarily experimental but some finite element results were obtained. Both the deformation and the failure of the beams were of interest. The static response of the beams was also studied to determine potential differences between the static and dynamic failure. Twelve different laminate types were tested. The beams were loaded dynamically with a gravity driven impactor traveling at 19.6 ft/sec and quasi-static tests were conducted on identical beams in a displacement controlled manner. For laminates of practical interest, the failure modes under static and dynamic loadings were identical. Failure in most of the laminate types occurred in a single event involving 40% to 50% of the plies. However, failure in laminates with 30 deg or 15 deg off-axis plies occured in several events. All laminates exhibited bimodular elastic properties. Using empirically determined flexural properties, a finite element analysis was reasonably accurate in predicting the static and dynamic deformation response.

Derian, E. J.↗

NASA NTRS1985

Upconversion of lower-hybrid waves by gyrating ion beams in a plasma

A gyrating ion beam, with ring shape distribution in velocity space, supports negative energy modes near the harmonics of beam gyrofrequency. An investigation of the nonlinear interaction of high-frequency lower-hybrid waves with the negative energy beam cyclotron mode is made. A nonlinear dispersion relation is derived for the coupled modes. It is shown that a gyrating ion beam frequency upconverts the lower-hybrid waves separated by harmonics of the beam gyrofrequency. This process of upconversion may thus provide a tool for the diagnostics of the gyrating ion beams. The process may also be important in the saturation of lower-hybrid waves observed in the auroral zone S3-3 satellite data.

Sharma, O. P.↗

NASA NTRS1985

Electromagnetic ion beam instabilities. II

The results of Gary et al. (1984) on the properties of the right-hand resonant and nonresonant electromagnetic ion beam instabilities for relatively cool beam temperatures are extended. In particular, the parametric dependence of the real frequency at maximum growth of these modes is examined. It is demonstrated that the right-hand resonant ion beam instability can have maximum growth at frequencies near the ion-cyclotron frequency if the beam main component relative drift speed is about twice the Alfven speed and at least one of two conditions holds: that the ion beta or the beam main component relative temperature are sufficiently small, or the perpendicular-to-parallel beam temperature ratio is sufficiently large. These results support the identification of the right-hand resonant instability as the source of the large amplitude magnetic fluctuations observed upstream of slow shocks in the earth's magnetotail.

Gary, S. P.↗

NASA NTRS1986

The generation of broadband electrostatic noise by an ion beam in the magnetotail

The results of a theoretical investigation of the generation of broadband electrostatic noise (BEN) by an ion beam in the earth's magnetotail are presented. It is shown that at low beam temperatures an ion beam can generate BEN at wave normal angles (theta) between zero and 80 deg with the maximum growth occurring at theta - 0 deg when the beam velocity is small and at large theta (about 70 deg) for higher beam velocities. It is also shown that two types of instability are responsible for the wave amplification. One is the ion acoustic instability associated with the electron-ion beam relative drift, and the other is the ion-ion instability. The broad frequency and angular spectra of BEN can be explained by the presence of the two instabilities. These instabilities are shown to be insensitive to the presence of a background magnetic field.

Akimoto, K.↗

NASA NTRS1987

Near fields in the vicinity of pulsed electron beams in space

Most measurements of the radio frequency emissions from artificial electron beams in space have been made in close proximity to the beam. This paper presents theory and results for the near-field radiation associated with the operation of a pulsed electron beam, taking into account the effects of the ionospheric plasma. The beam is modeled as an infinite train of square-wave pulses and the radiation is obtained by adding coherently the radiation from each individual electron in the idealized helical trajectory assumed by the beam as it traverses the magnetized plasma. The mathematical solution is obtained by taking the Fourier transform in space and time of Maxwell's equations and the driving modulated beam current, and then taking the inverse transform of the resulting electric field. Typical electric field strengths are presented for a range of modulation frequencies extending from below the ion cyclotron to the electron cyclotron frequency.

Harker, K. J.↗

NASA NTRS1987

Solar cycle variation of some mass dependent characteristics of upflowing beams of terrestrial ions

Examination of the S3-3 and DE ion composition data spread over a solar cycle indicates that some characteristics of energetic upflowing terrestrial ion beams above the auroral zone show dependence on solar cycle. At solar maximum the different ion beam mass components have comparable mean energies, and O(+) dominates the beam composition. The ion energies are consistent with having been acquired from the potential drop below the satellite inferred from the electron loss cone distributions. At solar minimum the beam composition is dominated by H(+), but the O(+) has a higher mean energy and is hotter than the H(+) component. Also, the O(+) has more energy than it could itself have acquired from the potential drop. These observations are qualitatively consistent with the ion beams having acquired their energies from a parallel electric field and being partially thermalized through the two-stream instability between the two ion species, with this effect being modulated by the beam composition.

Collin, H. L.↗

NASA NTRS1987

Nonlinear beam kinematics by decomposition of the rotation tensor

A simple matrix expression is obtained for the strain components of a beam in which the displacements and rotations are large. The only restrictions are on the magnitudes of the strain and of the local rotation, a newly-identified kinematical quantity. The local rotation is defined as the change of orientation of material elements relative to the change of orientation of the beam reference triad. The vectors and tensors in the theory are resolved along orthogonal triads of base vectors centered along the undeformed and deformed beam reference axes, so Cartesian tensor notation is used. Although a curvilinear coordinate system is natural to the beam problem, the complications usually associated with its use are circumvented. Local rotations appear explicitly in the resulting strain expressions, facilitating the treatment of beams with both open and closed cross sections in applications of the theory. The theory is used to obtain the kinematical relations for coupled bending, torsion, extension, shear deformation, and warping of an initially curved and twisted beam.

Danielson, D. A.↗

NASA NTRS1987

Nonlinear beam kinematics for small strains and finite rotations

A simple matrix expression is obtained for the strain components of a beam in which the magnitudes of neither beam displacements nor rotations are explicitly restricted. The only kinematical restrictions are that: (1) strains are small compared to unity and (2) components of local rotation, a newly identified kinematical quantity, are of the order of the strains to a fractional power equal to at least one half. Local rotations are defined as the change of orientation of material elements off the beam reference axis relative to those on the beam reference axis. Local rotations appear explicitly in the resulting strain expressions, facilitating the treatment of both open- and closed-section beams in applications of the theory. The resulting strain components are expressed in a local Cartesian coordinate system and can be calculated directly in that way. Thus, one can use a curvilinear coordinate system that is natural to the beam problem without the complications that usually surround such an approach. Examples show the simplicity and the generality of the present approach as well as why previously published results differ among themselves concerning tension-torsion coupling.

Hodges, Dewey H.↗

NASA NTRS1988

Vibrational Power Flow Analysis of Rods and Beams

A new method to model vibrational power flow and predict the resulting energy density levels in uniform rods and beams is investigated. This method models the flow of vibrational power in a manner analogous to the flow of thermal power in a heat conduction problem. The classical displacement solutions for harmonically excited, hysteretically damped rods and beams are used to derive expressions for the vibrational power flow and energy density in the rod and beam. Under certain conditions, the power flow in these two structural elements will be shown to be proportional to the energy density gradient. Using the relationship between power flow and energy density, an energy balance on differential control volumes in the rod and beam leads to a Poisson's equation which models the energy density distribution in the rod and beam. Coupling the energy density and power flow solutions for rods and beams is also discussed. It is shown that the resonant behavior of finite structures complicates the coupling of solutions, especially when the excitations are single frequency inputs. Two coupling formulations are discussed, the first based on the receptance method, and the second on the travelling wave approach used in Statistical Energy Analysis. The receptance method is the more computationally intensive but is capable of analyzing single frequency excitation cases. The traveling wave approach gives a good approximation of the frequency average of energy density and power flow in coupled systems, and thus, is an efficient technique for use with broadband frequency excitation.

Wohlever, James Christopher↗

NASA NTRS1988

Observations of electron beam structure in space experiments

Observations of a 100-mA, 1-keV electron beam were made with a low light level TV system and other instruments aboard the space shuttle STS 3 in March 1982. When fired at a moderate pitch angle with respect to the magnetic field, the beam electrons initially moved outward along a classical helical trajectory. Within a short distance, however, the beam electrons were deflected away from the helical trajectory into paths parallel to magnetic field lines threading the primary helix. This resulted in the formation of a thin-walled, cylindrical electron beam structure having a radius equal to the primary beam gyroradius. This structure, which is consistent with earlier laboratory vacuum chamber observations and recent two-dimensional computer electrostatic plasma simulations, has important implications for determining the extent to which pulsed electron beams can radiate electromagnetic energy in the ionosphere.

Banks, Peter M.↗

NASA NTRS1988

Simulation of electrostatic turbulence in the plasma sheet boundary layer with electron currents and bean-shaped ion beams

Plasma data from ISEE-1 show the presence of electron currents as well as energetic ion beams in the plasma sheet boundary layer. Broadband electrostatic noise and low-frequency electromagnetic bursts are detected in the plasma sheet boundary layer, especially in the presence of strong ion flows, currents, and steep spacial gradients in the fluxes of few-keV electrons and ions. Particle simulations have been performed to investigate electrostatic turbulence driven by a cold electron beam and/or ion beams with a bean-shaped velocity distribution. The simulation results show that the counterstreaming ion beams as well as the counterstreaming of the cold electron beam and the ion beam excite ion acoustic waves with a given Doppler-shifted real frequency. However, the effect of the bean-shaped ion velocity distributions reduces the growth rates of ion acoustic instability. The simulation results also show that the slowing down of the ion bean is larger at the larger perpendicular velocity. The wave spectra of the electric fields at some points of the simulations show turbulence generated by growing waves.

Nishikawa, K.-I.↗

NASA NTRS1988

Double-probe potential measurements near the Spacelab 2 electron beam

As part of the Spacelab 2 mission the plasma diagnostics package (PDP) was released from the shuttle as a free-flying satellite. The PDP carried a quasi-static electric field instrument which made differential voltage measurements between two floating probes. At various times during the free flight, an electron beam was ejected from the shuttle. Large differential voltages between the double probes were recorded in association with the electron beam. However, analysis indicates that these large signals are probably not caused by ambient electric fields. Instead, they can be explained by considering three effects: shadowing of the probes from streaming electrons by the PDP chassis, crossing of the PDP wake by the probes, and spatial gradients in the fluxes of energetic electrons reaching the probes. Plasma measurements on the PDP show that energetic electrons exist in a region 20 m wide and up to at least 170 m downstream from the electron beam. At 80 or more meters downstream from the beam, the double probe measurements show that the energetic electron flux is opposite to the injection direction, as would be expected for a secondary returning electron beam produced by scattering of the primary electron beam.

Steinberg, J. T.↗

NASA NTRS1988

Electric potential structures and propagation of electron beams injected from a spacecraft into a plasma

One-dimensional Vlasov simulations are used to study the propagation of electron beams injected from a spacecraft into an ambient plasma and the associated potential structures. It is shown that, for a given beam velocity, the propagation velocity and the potential structure depends on the beam density. In the case of moderate beams, a double layer forms near the beam head which propagates into the ambient plasma much more slowly than the initial beam velocity.

Singh, Nagendra↗

NASA NTRS1989

Delayed Shutters For Dual-Beam Molecular Epitaxy

System of shutters for dual-molecular-beam epitaxy apparatus delays start of one beam with respect to another. Used in pulsed-beam equipment for deposition of low-dislocation layers of InAs on GaAs substrates, system delays application of arsenic beam with respect to indium beam to assure proper stoichiometric proportions on newly forming InAs surface. Reflectance high-energy electron diffraction (RHEED) instrument used to monitor condition of evolving surface of deposit. RHEED signal used to time pulsing of molecular beams in way that minimizes density of defects and holds lattice constant of InAs to that of GaAs substrate.

Grunthaner, Frank J.↗

NASA NTRS1989

The electron beam instability revisited: Growth above and below f sub p

The growth of electrostatic waves near the plasma frequency (fp) due to an unstable electron beam is investigated by solving the unmagnetized electrostatic dispersion equation numerically. The numerical solutions are compared with analytic theories for reactive (or fluid-type) and kinetic versions of the beam instability, and for the O'Neil/Malmberg connection of the beam and Langmuir modes. Conditions for growth significantly above or below fp are given. Three general results are found: (1) The unstable waves do not grow on a mode with Langmuir dispersion except in the limit of a very dilute beam with growth on O'Neil/Malmberg's connected mode; (2) The properties of the unstable mode depend strongly on beam parameters such as beam density, speed and temperature; and (3) The frequency of maximum growth frequently lies significantly above or below fp, and differs significantly from that predicted by the Langmuir dispersion relation. Results imply important consequences for theories of strong turbulence and nonlinear wave-wave processes, and observational identification of fp from observed wave frequencies.

Cairns, I. H.↗

NASA NTRS1989

An integrating matrix formulation for buckling of rotating beams including the effects of concentrated masses

The integrating matrix technique of computational mechanics is extended to include the effects of concentrated masses. The stability of a flexible rotating beam with discrete masses is analyzed to determine the critical rotational speeds for buckling in the inplane and out-of-plane directions. In this problem, the beam is subjected to compressive centrifugal forces arising from steady rotation about an axis which does not pass through the clamped end of the beam. To determine the eigenvalues from which stability is assessed, the differential equations of motion are solved numerically by combining the extended integrating matrix method with an eigenanalysis. Stability boundaries for a discrete mass representation of a uniform beam are shown to asymptotically approach the stability boundaries for the corresponding continuous mass beam as the number of concentrated masses is increased. An error in the literature is also noted for the discrete mass problem concerning the behavior of the critical rotational speed for inplane buckling as the radius of rotation of the clamped end of the beam is reduced.

Lakin, William D.↗

NASA NTRS1988

Beam-plasma interactions in space experiments - A simulation study

The plasma environment in the vicinity of a spacecraft during the injection of dense electron beams is studied using a two-dimensional, isolated-system electrostatic simulation model. The dependence of the beam stagnation time on the beam width and energy is examined. It is found that the relative size of the beam stagnation time and the ambient-plasma response time determines the environment of the spacecraft. The case of cross-field injection with beam stagnation time greater than plasma response time is discussed in detail. Also, the nature of the beam properties, plasma response, and wave spectra are considered.

Pritchett, P. L.↗

NASA NTRS1989

The effects of ion gun beam voltage on the electrical characteristics of NbCN/PbBi edge junctions

The authors have succeeded in fabricating high-quality submicron NbCN edge junctions using a technique which is commonly used to make Nb edge junctions. A modified commercial ion gun was used to cut an edge in SiO2/NbCN films partially covered with photoresist. An insulating barrier was then formed on the exposed edge by reactive ion beam oxidation, and a counterelectrode of PbBi was deposited. The electrical quality of the resulting junctions was found to be strongly influenced by the ion beam acceleration voltages used to cut the edge and to oxidize it. For low ion beam voltages, the junction quality parameter was as high as Vm = 55 mV (measured at 3 mV), but higher ion beam voltages yielded strikingly poorer quality junctions. In light of the small coherence length of NbN, the dependence of the electrical characteristics on ion beam voltage is presumably due to mechanical damage of the NbCN surface. In contrast, for similar ion beam voltages, no such dependence was found for Nb edge junctions.

Lichtenberger, A. W.↗