Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ADVANCED”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Enhancing the detector for advanced neutron capture experiments

The Detector for Advanced Neutron Capture Experiments (DANCE) has been used for extensive studies of neutron capture, gamma decay, photon strength functions, and prompt and delayed fission-gamma emission. Despite these successes, the potential measurements have been limited by the data acquisition hardware. We report on a major upgrade of the DANCE data acquisition that simultaneously enables strait-forward coupling to auxiliary detectors, including high-resolution high-purity germanium detectors and neutron tagging array. The upgrade will enhance the time domain accessible for time-of-flight neutron measurements as well as improve the resolution in the DANCE barium fluoride crystals for photons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Recent Advances and Future Advances in Time-of-Flight PET

Simple theory predicts that the statistical noise variance in PET can be reduced by an order of magnitude by using time-of-flight (TOF) information. This reduction can be obtained by improving the coincidence timing resolution, and so would be achievable in clinical, whole body studies using with PET systems that differ little from existing cameras. The potential impact of this development is large, especially for oncology studies in large patients, where it is sorely needed. TOF PET was extensively studied in the 1980's but died away in the 1990's, as it was impossible to reliably achieve sufficient timing resolution without sacrificing other important PET performance aspects, such as spatial resolution and efficiency. Recent advances in technology (scintillators, photodetectors, and high speed electronics) have renewed interest in TOF PET, which is experiencing a rebirth. However, there is still much to be done, both in instrumentation development and evaluating the true benefits of TOF in modern clinical PET. This paper looks at what has been accomplished and what needs to be done before time-of-flight PET can reach its full potential.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modeling of advanced divertor configuration on experimental advanced superconducting tokamak by SOLPS5.0/B2.5-Eirene

Heat exhaust is one of the most challenging issues to be addressed for tokamak magnetic confinement fusion research. Detailed modeling with SOLPS5.0/B2.5-Eirene code package is carried out to examine an alternative advanced divertor configuration, i.e., quasi snowflake (QSF), for long pulse operation in EAST. Comparison is also made with the lower single null (LSN) divertor configuration. SOLPS predicts that the quasi snowflake configuration significantly reduces the peak heat flux at the lower divertor outer target, by a factor of 2–3, owing to the magnetic flux expansion. Furthermore, the density threshold for detachment is much lower for QSF, compared to LSN under the same upstream conditions. This indicates that QSF provides a promising tool for controlling heat flux at divertor target while maintaining a lower separatrix density, which is highly desirable for current drive, thus greatly facilitating long-pulse operation in EAST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advanced Spectral Analysis Program

Advanced Spectral Analysis Program is a LabVIEW-based program intended for rapid and accurate analysis of large sets of spectral data. It can handle a range of different types of data including angle-resolved and energy-dispersive powder diffraction and Raman spectra. We present it here with a focus on high-temperature high-pressure powder diffraction. The program contains a novel graphical user interface that allows rapid manual fitting and indexing of peaks which require precise fitting ranges and includes tools for fitting any Bravais lattice and arbitrary user-defined multivariate equations of state. The program allows the user to simultaneously view and manipulate multiple data sets from an experiment. The user can save and load analysis progress at any point, allowing for repeatable calculations to be performed, and to allow the fast comparison of different analysis parameters.

47 OTHER INSTRUMENTATION↗

Advanced Characterization in Advanced Manufacturing Workshop

The Advanced Manufacturing (AM) Work shop successfully convened experts from government, academia, and industry to address pressing scientific challenges and strengthen the AM user community. The workshop was held at the U.S. Department of Energy’s (DOE) Brookhaven National Laboratory during the National Synchrotron Light Source II (NSLS-II) and Center for Functional Nanomaterials (CFN) Users’ Meeting. Participation included researchers from Stony Brook University, Massachusetts Institute of Technology, Yale University, Harvard University, Columbia University, and several other institutions across the United States and the world. In conclusion, the program featured three complementary components—oral presentations, a facility tour, and a brainstorming session— that together fostered collaboration and high lighted the transformative role of synchrotron based characterization in AM.

36 MATERIALS SCIENCE↗

Advances and challenges in computational fluid dynamics of atmospheric pressure plasmas

Atmospheric pressure plasmas (APPs) are at the core of diverse technological applications in materials processing, chemical synthesis, resource recovery, water treatment, and medicine, among others. APPs span a wide range of power density, from low-power non-thermal to high-power thermal discharges, and typically involve interactions with a stream of working gas, processing material, or gas environment. The article provides an overview of Computational Fluid Dynamics (CFD) approaches, from mathematical models to software strategies, for the analysis of APP flows. Its focus is flows with large variations in ionization degree and significant fluid dynamic-thermal-electromagnetic coupling, as particularly found in mid- to high-power discharges. The advances achieved and challenges faced by CFD of APP flows have been driven by established and emerging applications, and can be broadly characterized in terms of model fidelity and numerical accuracy. Fidelity refers to the degree of underlying phenomena captured by the model, whereas accuracy to the precision of the numerical solution of the model. Two distinct numerical accuracy challenges are addressed: the capture of instability and pattern formation phenomena, and of plasma-gas interaction and turbulence; as well as two representative fidelity challenges: radiative transport under nonequilibrium conditions, and nonequilibrium electron and particle kinetics. The purpose of this article is to offer guidance to researchers, from modelers and code developers to open-source and commercial software users, working on CFD analyses of APP flows within technological contexts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Summary of thermocouple performance during advanced gas reactor fuel irradiation experiments in the advanced test reactor and out-of-pile thermocouple testing in support of such experiments

High temperature gas reactor experiments create unique challenges for thermocouple-based temperature measurements. As a result of the interaction with neutrons, the thermoelements of the thermocouples undergo transmutation, which produces a time-dependent change in composition and, as a consequence, a time-dependent drift of the thermocouple signal. This drift is particularly severe for high temperature platinum-rhodium thermocouples (Types S, R, and B) and tungsten-rhenium thermocouples (Type C). For lower temperature applications, previous experiences with Type K thermocouples in nuclear reactors have shown that they are affected by neutron irradiation only to a limited extent. Similarly, Type N thermocouples are expected to be only slightly affected by neutron fluence. Currently, the use of these nickel-based thermocouples is limited when the temperature exceeds 1000 deg. C due to drift related to phenomena other than nuclear irradiation. High rates of open-circuit failure are also typical. Over the past 10 years, three long-term Advanced Gas Reactor experiments have been conducted with measured temperatures ranging from 700 deg. C - 1200 deg. C. A variety of standard Type N and specialty thermocouple designs have been used in these experiments with mixed results. A brief summary of thermocouple performance in these experiments is provided. Most recently, out-of-pile testing has been conducted on a variety of Type N thermocouple designs at the following (nominal) temperatures and durations: 1150 deg. C and 1200 deg. C for 2,000 hours at each temperature, followed by 200 hours at 1250 deg. C and 200 hours at 1300 deg. C. The standard Type N design utilizes high purity, crushed MgO insulation and an Inconel 600 sheath. Several variations on the standard Type N design were tested, including a Haynes 214 alloy sheath, spinel (MgAl{sub 2}O{sub 4}) insulation instead of MgO, a customized sheath developed at the University of Cambridge, and finally a loose assembly thermocouple with hard-fired alumina insulation and a molybdenum sheath. The most current version of the High Temperature Irradiation Resistant Thermocouple, based on molybdenum/niobium alloys and developed at Idaho National Laboratory, was also tested. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques

The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with sub-nanometer precision, typically for quantum physics demonstrations, and to dope silicon past the solid-solubility limit, with potential applications in microelectronics and plasmonics. However, this process, which we call atomic precision advanced manufacturing (APAM), currently lacks the throughput required to develop sophisticated applications because there is no proven scalable hydrogen lithography pathway. Here, we demonstrate and characterize an APAM device workflow where STM lithography has been replaced with photolithography. An ultraviolet laser is shown to locally heat silicon controllably above the temperature required for hydrogen depassivation. STM images indicate a narrow range of laser energy density where hydrogen has been depassivated, and the surface remains well-ordered. A model for photothermal heating of silicon predicts a local temperature which is consistent with atomic-scale STM images of the photo-patterned regions. Finally, a simple device made by exposing photo-depassivated silicon to phosphine is found to have a carrier density and mobility similar to that produced by similar devices patterned by STM.

42 ENGINEERING↗

Advances in actinide solid-state and coordination chemistry

Actinide solid-state and coordination chemistry has advanced through unexpected results that have further revealed the complex nature of the 5f elements. Nanoscale control of actinide materials is emerging, as shown by the creation of a considerable range of cluster and tubular topologies. Departures from established structural trends for actinyl ions are provided by cation-cation interactions in which an O atom of one actinyl ion is an equatorial ligand of a bipyramid of another actinyl ion. The solid-state structural complexity of actinide materials has been further demonstrated by open framework materials with interesting properties. The U(VI) tetraoxide core has been added to this cation's repertoire of coordination possibilities. The emergence of pentavalent uranium solid-state and coordination chemistry has resulted from the prudent selection of ligands. Finally, analogues of the uranyl ion have challenged our understanding of this normally unreactive functional group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced Scientific Computing Research Exascale Requirements Review. An Office of Science review sponsored by Advanced Scientific Computing Research, September 27-29, 2016, Rockville, Maryland

The widespread use of computing in the American economy would not be possible without a thoughtful, exploratory research and development (R&D) community pushing the performance edge of operating systems, computer languages, and software libraries. These are the tools and building blocks — the hammers, chisels, bricks, and mortar — of the smartphone, the cloud, and the computing services on which we rely. Engineers and scientists need ever-more specialized computing tools to discover new material properties for manufacturing, make energy generation safer and more efficient, and provide insight into the fundamentals of the universe, for example. The research division of the U.S. Department of Energy’s (DOE’s) Office of Advanced Scientific Computing and Research (ASCR Research) ensures that these tools and building blocks are being developed and honed to meet the extreme needs of modern science. See also http://exascaleage.org/ascr/ for additional information.

97 MATHEMATICS AND COMPUTING↗

Resilience for Advanced Distributed Wind Systems: Identifying the resilience benefits of advanced controls and hybrid systems for distributed wind

Under the Department of Energy (DOE) Wind Energy Technologies Office (WETO), Idaho National Laboratory (INL) has been tasked with defining the resilience benefits of distributed wind systems for the Microgrids, Infrastructure Resilience, and Advanced Controls Launchpad (MIRACL) project. This project is a collaboration between the National Renewable Energy Laboratory (NREL), Sandia National Laboratories (SNL) and Pacific Northwest National Laboratory (PNNL). In the final year of this project, INL is collaborating with the other labs to bring together key results from our previous work on resilience, cybersecurity and risk, distributed wind hybrid systems, and valuation of distributed wind.

17 WIND ENERGY↗

Design and Prototyping of Advanced Control Systems for Advanced Reactors Operating in the Future Electric Grid (Final Report)

Despite its significant advantages as a baseload, low-carbon energy source, the U.S. nuclear power industry has faced increasing difficulties in maintaining economic competitiveness in a rapidly evolving energy market. The economic conditions faced by the current fleet of nuclear power plants (NPPs) in the U.S. deregulated electricity market require a concerted effort to mitigate specific cost factors. Many units are struggling to stay competitive, and some premature shutdowns have occurred. Besides, in response to the large penetration of renewable energy sources, the role of nuclear power plants as pure baseload units needs to be reconsidered. Based on these experiences, operational flexibility is considered a fundamental requirement for the next generation of nuclear reactors to be competitive in the future energy market. The deployment of advanced reactors capable of operating within a new power grid paradigm, known as the Integrated Energy System (IES) was investigated. This approach combines new reactor designs with Thermal Energy Storage (TES) technologies, allowing the nuclear reactor to maintain a steady power output without the need for constant adjustments in response to load demand fluctuations. With this configuration, the reactor operates as a baseload unit, experiencing only very gradual power transients, while the energy storage facility within the power conversion cycle acts as a peaking unit.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Advanced fuel chemistry for advanced engines.

Autoignition chemistry is central to predictive modeling of many advanced engine designs that combine high efficiency and low inherent pollutant emissions. This chemistry, and especially its pressure dependence, is poorly known for fuels derived from heavy petroleum and for biofuels, both of which are becoming increasingly prominent in the nation's fuel stream. We have investigated the pressure dependence of key ignition reactions for a series of molecules representative of non-traditional and alternative fuels. These investigations combined experimental characterization of hydroxyl radical production in well-controlled photolytically initiated oxidation and a hybrid modeling strategy that linked detailed quantum chemistry and computational kinetics of critical reactions with rate-equation models of the global chemical system. Comprehensive mechanisms for autoignition generally ignore the pressure dependence of branching fractions in the important alkyl + O{sub 2} reaction systems; however we have demonstrated that pressure-dependent 'formally direct' pathways persist at in-cylinder pressures.

02 PETROLEUM↗

Chemical Crystallography at the Advanced Light Source

Chemical crystallography at synchrotrons was pioneered at the Daresbury SRS station 9.8. The chemical crystallography beamlines at the Advanced Light Source seek to follow that example, with orders of magnitude more flux than a lab source, and various in situ experiments. This article thus attempts to answer why a chemist would require synchrotron X-rays, to describe the techniques available at the ALS chemical crystallography beamlines, and place the current facilities in a historical context.

36 MATERIALS SCIENCE↗