Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Reduced annealing temperatures in silicon solar cells

Cells irradiated to a fluence of 5x10,000,000,000,000/square cm showed short circuit current on annealing at 200 C, with complete annealing occurring at 275 C. Cells irradiated to 100,000,000,000,000/square cm showed a reduction in annealing temperature from the usual 500 to 300 C. Annealing kinetic studies yield an activation energy of (1.5 + or - 2) eV for the low fluence, low temperature anneal. Comparison with activation energies previously obtained indicate that the presently obtained activation energy is consistent with the presence of either the divacancy or the carbon interstitial carbon substitutional pair, a result which agrees with the conclusion based on defect behavior in boron-doped silicon.

Weinberg, I.↗

Temperature sensitivity of extracellular enzymes differs with peat depth but not with season in an ombrotrophic bog

Peatlands contain a large portion of Earth's terrestrial soil organic matter in part due to a reduction in decomposition rates. Organic matter decomposition is initially mediated by extracellular enzyme activity, which is in turn controlled by temperature, moisture, and substrate availability; and all are subject to seasonal variation. As depth increases in peatlands, temperature variability and labile carbon inputs decrease. We hypothesized that the more stable recalcitrant subsurface would contain a smaller less diverse enzyme pool, that is better adapted to a narrow temperature range. Thus temperature dependence would be diminished at depth compared to superficial peat. Potential enzyme activity rates were determined across seasons and with depth in peat samples collected from the Marcell Experimental Forest in northern Minnesota, USA. The temperature dependence, assessed by activation energy, was quantified for three hydrolytic enzymes involved in nutrient cycling at up to 15 temperature points ranging from 2 °C to 65 °C. Potential enzyme activity decreased with peat depth as expected and corresponded with changes in peat composition and microbial biomass from the acrotelm to the catotelm. In an environmentally relevant temperature range (2–23 °C), activation energy decreased with depth for β-glucosidase as predicted and leucine amino peptidase activation energy was the lowest of all enzymes. Stable temperatures at depth appear to result in a microbial community containing enzymes that have lower sensitivity to temperature increases. Surprisingly, there was no significant seasonal effect on enzyme temperature dependence observed in our study. Based on these results, and without shifts in microbial community composition, warming of peat could result in increased carbon and phosphorus cycling at the surface but little change at depth. As a result, differences in enzyme temperature sensitivity suggest nitrogen cycling could remain constant with warming, potentially resulting in proteolytic nitrogen cycling being decoupled from carbon and phosphorus cycling.

59 BASIC BIOLOGICAL SCIENCES↗

Study of discharge after electron irradiation in sapphires and polycrystalline alumina

The fraction R of charges undergoing discharge during the time separating two electron pulses is derived from the induced current method developed in a scanning electron microscope. Irradiation is performed via a 10 keV defocused electron beam and low current density. The evolution of R with temperature (in the range 300-663 K) obeys to an Arrhenius type relation. Activation energies connected with the processes involved are deduced. In sapphire, no discernible discharge is observed due to the dominance of deep traps. In silver doped sapphire, R increases sharply from 10% to 70% as the temperature rises from 360 to 420 K, with a corresponding activation energy of 0.51 eV. In contrast, in polycrystalline alumina processed by solid state sintering (grain diameters of 1.7, 2.7, and 4.5 {mu}m) the degree of discharge increases continuously with temperature and grain size. The enhancement with grain size indicates that the sintering conditions influence strongly the efficiency of a gettering effect. The activation energy below 573 K is about 0.12 eV independently of grain size. Above 573 K, a second activation energy of 0.26 eV appears for the smallest grain size sample. The results suggest that discharge may stem from a density of trapping states, associated to grain boundaries in sintered samples, rather than from a single trapping level linked to the doping element as Ag in sapphire.

36 MATERIALS SCIENCE↗

Catalyst design for small molecule activation of energy consequence

This project targets the conversion of ubiquitous small molecules (e.g. NO, CO, H 2 O) into viable precursors to synthetic fuels. Current state of the art catalyst design has not directly targeted transition metal complexes capable of mediating the multi-electron redox processes necessary to reduce the overpotential (energy loss) required achieve efficient activation of small molecule substrates. In this vein, a new strategy has been developed for the assembly of polynuclear architectures; allowing for the construction of tunable polymetallic centers that assemble easily within a pre-organized template (conferring stability, selectivity and tunability) that can effect multi-electron redox processes for reactions. Catalyst development has commenced with the following target design elements: (1) catalysts featuring multiple transition metal ions in the same reaction space to greatly expand accessible molecular redox capabilities; (2) catalysts are assembled in a polynucleating ligand framework that permits control over the cluster morphology as well as the local steric and electronic environment of the transition metal ions within the cluster. The high-tunability of the catalyst composition (metal content) and geometric flexibility has permitted a rigorous assessment of electronic-structure-to-function relationship to be developed, further guiding synthetic efforts to realize more potent catalysts. The numerous permutations possible showcase the high degree of generality to this approach with many synthetic handles to tune redox and reaction chemistry. Trinuclear complexes have been synthesized featuring homo- and hetero-trinuclear cores featuring a variety of first row transition metal ions (Cr→Ni). The molecular clusters have been shown to successfully mediate multi-electron redox processes in a cooperative fashion without requiring strong chemical reductants or oxidants. The reactive molecular complexes are being utilized to activate and breakdown the robust bonds within typical waste stream small molecules (e.g., greenhouse gases) and convert them into value-added commodity chemicals. Ultimately, the catalysts developed by this approach will be required to convert energy acquired via renewable resources (e.g., solar or wind) into synthetic fuels as an energy storage mechanism.

10 SYNTHETIC FUELS↗

Assessment of reduction behavior of hematite iron ore pellets in coal fines for application in sponge ironmaking

Studies on isothermal reduction kinetics (with F grade coal) in fired pellets of hematite iron ores, procured from four different mines of Orissa, were carried out in the temperature range of 850-1000C to provide information for the Indian sponge iron plants. The rate of reduction in all the fired iron ore pellets increased markedly with a rise of temperature up to 950C, and thereafter it decreased at 1000C. The rate was more intense in the first 30 minutes. All iron ores exhibited almost complete reduction in their pellets at temperatures of 900 and 950C in 2 hours' heating time duration, and the final product morphologies consisted of prominent cracks. The kinetic model equation 1-(1-a){sup 1/3}=kt was found to fit best to the experimental data, and the values of apparent activation energy were evaluated. Reductions of D. R. Pattnaik and M. G. Mohanty iron ore pellets were characterized by higher activation energies (183 and 150 kJ mol{sup -1}), indicating carbon gasification reaction to be the rate-controlling step. The results established lower values of activation energy (83 and 84 kJ mol{sup -1}) for the reduction of G. M. OMC Ltd. and Sakaruddin iron ore pellets, proposing their overall rates to be controlled by indirect reduction reactions.

01 COAL, LIGNITE, AND PEAT↗

Kinetics of Hydrogen Generation from In-Situ Methane Pyrolysis: Enhanced by Electromagnetic Heating and Natural Catalysts of Reservoir Rocks

Catalytic pyrolysis of methane (CH4) is a promising approach to generate hydrogen (H2). The apparent activation energy of this process has a significant influence on the efficiency and required temperature for H2 generation. Preliminary experiments indicate that minerals present in shales have catalytic effects during in-situ H2 generation from shale reservoirs under electromagnetic (EM) heating. However, the quantitative role of such natural catalysts on apparent activation energy is not explored yet. This research evaluated the role of reservoir rock (shale) in EM heating and on the apparent activation energy of methane pyrolysis (MP) for in-situ H2 generation. Experiments are conducted in a customized EM reactor with frequency 2.45 GHz, and reaction temperature and generated gases are measured by a real-time IR pyrometer and gas analyzer, respectively. It is found that shale samples experienced thermal runway (TR) at 420 ºC under 0.15 kW EM power without any artificial heating promoter. In the presence of spent shale, CH4 conversion started approximately at 600 ºC with negligible amount of carbon dioxide (CO2) generated during this process. We further calculated apparent reaction order and apparent activation energy for MP process in the presence of shale under EM heating, which are 0.4357 and 98.12 kJ/mol, respectively. This research paves a way for leveraging the role of minerals as natural catalysts for enhancing H2 generation under EM heating in petroleum reservoirs.

02 PETROLEUM↗

A study of the relationship between lithium ion transport and structure and dynamic behavior in polyethylene oxide-melt/LiClO 4 battery electrolytes.

An experimental study of the canonical SPE (“solid” polymer electrolyte) for rechargeable “rocking chair” lithium/polymer batteries, viz. LiClO4 dissolved in molten poly(ethylene oxide) (PEO), was carried out under DOE grant FG02-04ER15573. In this study, an improved understanding was obtained of the relationship between lithium ion transport and polymer behavior in these SPEs. Among other applications, these sturdy temperature-tolerant and powerful light-weight batteries would be used in electric and electric-hybrid vehicles to reduce greenhouse gas emissions, to store unused electrical energy for peak demand loads and as compact, light-weight energy sources for aircraft and spacecraft. During the period of the grant, the American/Canadian partnership company “Avestor” fabricated and successfully demonstrated a telecommunications application of shoe-box sized batteries and representatives from Avestor visited our research lab at UNLV. They found our results interesting and relevant to their work and invited us to visit Avestor and present a talk about our efforts at UNLV. Unfortunately Avestor (who was scheduled to build a battery production facility in Apex, Nevada just North of Las Vegas) folded before the visit could be made. In the grant work, two well characterized PEO samples having molar masses distinctly below and distinctly above the melt entanglement molar mass were used and three laser light scattering techniques employed as the principal noninvasive methods of investigating liquid poly(ethylene oxide) (PEO)/LiClO4 SPEs. These investigations considered the effects of temperature, dissolved salt concentration and scattering wavevector on SPE behavior. Classical or “static” light scattering and the dynamic light scattering techniques of photon correlation spectroscopy (PCS) and Fabry-Perot interferometry (FPI) were used to study SPE static, low frequency and high frequency dynamic behaviors, respectively. Static measurements provided information about system structure while low frequency results provided information about slower (0.1-10s) more global behavior and high frequency results provided information about faster (~10-11s) more local behavior. In addition, viscometry, rheometry and thermal analysis provided vital complementary results. It was found that liquid PEO/lithium salt solutions for both PEO molar masses are random transient physical networks with measureable network and intra-network relaxation times using PCS and FPI. Thus novel and informative results addressing both large scale and small scale behavior were obtained. For example, the high sensitivity of liquid PEO electrolytes to the presence of presumably undesirable trace amounts of residual water and/or methanol was clearly evident in PCS measurements. In “unentangled” melts the activation energies for diffusive relaxation in liquid PEO/lithium salt electrolytes measured using PCS and the activation energies for viscous flow in these systems determined by viscometry were identical while thermal analyses detected no phase transitions for these systems. These results reinforced an earlier assumption that the liquid PEO/LiClO4 system is a liquid polymer “bimorph” (to our knowledge the first of its kind to be reported) with the network comprising one form of the polymer while the second form corresponds to that of a viscous damping liquid. At a given temperature, FPI characteristic relaxation times for local, between-chain motions were consistent with PCS results so that increases with increasing salt concentration were accompanied by increases in the elastic modulus and corresponding increases in system stiffness. Note that corresponding decreases in polymer segmental mobility are accompanied by reduced ion diffusivity. For entangled melts, PCS network relaxations were again observed and these systems were also considered to be bimorphs even though diffusion activation energies were distinctly larger than viscous flow activation energies - a difference attributed to the effects of entanglement. Moreover, SLS measurements revealed entangled melts to be “percolation gels” with a measured fractal dimension of about 2 and static correlation lengths that increased gradually from about 500 nm to about 700 nm with increasing salt concentration. Meanwhile, rheological measurements found these polymer/salt melts to behave simply as liquids. FPI measurements have not yet been made on these entangled PEO melts.

25 ENERGY STORAGE↗

Consequences of product inhibition in the quantification of kinetic parameters

While the potential for product inhibition in catalytic reactions is well known, the impact of neglected inhibition on measured kinetic parameters is often overlooked. The presence of product inhibition, most often caused by the competitive adsorption of products with reactants on catalytic active sites, is difficult to determine a priori for an arbitrary catalytic system. The significance of product inhibition relies on the concentration of the products, their adsorption thermodynamics on catalytically relevant sites, and process parameters such as temperature and pressure. When inhibition is significant, however, apparent activation energies and reaction orders vary from the differential-reactor apparent activation energy by a factor of 1/(1 - δ), where δ is the total inhibition order (e.g., the factor (1 - δ) = 1.6 for a system with product inhibition of -0.6 order). This is illustrated here with the kinetics of NO oxidation over Cu ion clusters (Cu x O y ) in Cu-SSZ-13, for which the product NO 2 inhibits the forward reaction. Furthermore, in the presence of inhibition, when only reactants are fed to a flow reactor or placed in a batch reactor, there is often no practical conversion that is low enough to guarantee differential behavior. Inclusion of products in the feed solves this problem, allowing accurate determination of kinetic parameters such as apparent reaction orders and activation energies. We also demonstrate that evaluation of the necessity of co-feeding products to assure measurement of differential-reactor data in a given catalytic system is straightforward from a plot of the log of the rate (or conversion) versus the log of the space time in a flow reactor or elapsed time in a batch reactor. We encourage inclusion of this test in all kinetic analyses that are reasonably approximated by power law rate expressions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of 50MeV Li{sup 3+} ion irradiation on structural, optical and electrical properties of amorphous Se{sub 95}Zn{sub 5} thin films

Present work focuses on the effect of swift heavy ion (SHI) irradiation of 50MeV Li{sup 3+} ions by varying the fluencies in the range of 1×10{sup 12} to 5×10{sup 13} ions/cm{sup 2} on the morphological, structural, optical and electrical properties of amorphous Se{sub 95}Zn{sub 5} thin films. Thin films of ~250nm thickness were deposited on cleaned glass substrates by thermal evaporation technique. X-ray diffraction (XRD) analysis shows the pristine thin film of Se{sub 95}Zn{sub 5} growsin hexagonal phase structure. Also it was found that the small peak observed in XRD spectra vanishes after SHI irradiation indicates the defects of the material increases. The optical parameters: absorption coefficient (α), extinction coefficient (K), refractive index (n) optical band gap (E{sub g}) and Urbach’s energy (E{sub U}) are determined from optical absorption spectra data measured from spectrophotometry in the wavelength range 200-1000nm. It was found that the values of absorption coefficient, refractive index and extinction coefficient increases while the value optical band gap decreases with the increase of ion fluence. This post irradiation change in the optical parameters was interpreted in terms of bond distribution model. Electrical properties such as dc conductivity and temperature dependent photoconductivity of investigated thin films were carried out in the temperature range 309-370 K. Analysis of data shows activation energy of dark current is greater as compared to activation energy photocurrent. The value of activation energy decreases with the increase of ion fluence indicates that the defect density of states increases.Also it was found that the value of dc conductivity and photoconductivity increases with the increase of ion fluence.

36 MATERIALS SCIENCE↗

Optical properties of surface modified polypropylene by plasma immersion ion implantation technique

The optical band gap and activation energy of polypropylene (PP) induced by an Ar plasma immersion ion implantation technique were studied in detail. It was revealed that the structural alternation with an increase in polymer chain cross-linking in the ion beam affected layer enhanced the optical properties of PP. The optical band gap, calculated from the transmittance spectra, decreased from 3.44 to 2.85 eV with the Ar plasma ion energy from 10 to 50 keV. The activation energy, determined from the band tail of the transmittance spectra, decreased while the electrical conductivity increased with the Ar plasma ion energy.

36 MATERIALS SCIENCE↗

Effect of borides on hot deformation behavior and microstructure evolution of powder metallurgy high borated stainless steel

To investigate borides effect on the hot deformation behavior and microstructure evolution of powder metallurgy high borated stainless steel, hot compression tests at the temperatures of 950– 1150 °C and the strain rates of 0.01– 10 s{sup −1} were performed. Flow stress curves indicated that borides increased the material's stress level at low temperature but the strength was sacrificed at temperatures above 1100 °C. A hyperbolic-sine equation was used to characterize the dependence of the flow stress on the deformation temperature and strain rate. The hot deformation activation energy and stress exponent were determined to be 355 kJ/mol and 3.2, respectively. The main factors leading to activation energy and stress exponent of studied steel lower than those of commercial 304 stainless steel were discussed. Processing maps at the strains of 0.1, 0.3, 0.5, and 0.7 showed that flow instability mainly concentrated at 950– 1150 °C and strain rate higher than 0.6 s{sup −1}. Results of microstructure illustrated that dynamic recrystallization was fully completed at both high temperature-low strain rate and low temperature-high strain rate. In the instability region cracks were generated in addition to cavities. Interestingly, borides maintained a preferential orientation resulting from particle rotation during compression. - Highlights: •The decrement of activation energy was affected by boride and boron solution. •The decrease of stress exponent was influenced by composition and Cottrell atmosphere. •Boride represented a preferential orientation caused by particle rotation.

36 MATERIALS SCIENCE↗

Isothermal degradation of poly-2,2'-/m-phenylene/-5,5'-bibenzimidazole

The isothermal degradation of poly-2,2'-(m-phenylene)-5,5'-bibenzimidazole in vacuo has been studied. Measurement of the increase in pressure with time, coupled with infrared analysis, was used to determine the distribution of the degradation products. Processes A and B with different second-order rate laws were determined to be significant in the temperature range of 550-700 C. Process A leads to the formation of equimolar quantities of hydrogen and ammonia and has an activation energy of 68 kcal/mole. Process B leads to the production of HCN, NH3, and H2 in the ratio of 1:1:2.5 and has an activation energy of 77 kcal/mole. The activation energies and the rate laws are consistent with a mechanism in which the initial degradation step is the bimolecular reaction of two aromatic rings.

Lerner, N. R.↗

Density Dependence of the Phases of the v = 1 Integer Quantum Hall Plateau in Low Disorder Electron Gases

Recent magnetotransport measurements in low-disorder electron systems confined to GaAs/AlGaAs samples reveal that the v = 1 integer quantum Hall plateau is broken into three distinct regions. These three regions are associated with two phases with different types of bulk localization: the Anderson insulator is due to random quasiparticle localization, and the integer quantum Hall Wigner solid is due to pinning of a stiff quasiparticle lattice. Universal properties of the v = 1 plateau are highlighted: the structure of the stability diagram, the nonmonotonic dependence of the activation energy on the filling factor, and the alignment of features of the activation energy with features of the stability regions of the different phases are found to be similar in three samples spanning a wide range of electron densities. Quantitative differences between the samples are also discussed, such as the dependence of the onset temperature and the activation energy of the integer quantum Hall Wigner solid on the electron density. The findings provide insights into the localization behavior along the v = 1 integer quantum Hall plateau in the low disorder regime.

Anderson insulator↗

Cu Loading Dependence of Fast NH 3 -SCR on Cu/SSZ-13

The fast NH 3 -SCR kinetics are studied on Cu/SSZ-13 with different Cu loadings, under reaction conditions (temperature and space velocity) where both steady-state and differential NO x conversions are readily achieved. Cu loading is found to greatly influence low-temperature NOx turnover rates, however not to substantially affect apparent activation energies. The high reaction apparent activation energies (~160 kJ/mol) suggest that the rate-limiting kinetics for fast SCR involve the participation of NH 4 NO 3 , an intermediate that is of considerable stability in small pore zeolites. Furthermore, the energetically demanding NH 4 NO 3 + NO reactions make low-temperature fast SCR much slower than standard SCR over Cu-exchanged small pore zeolite catalysts, in drastic contrast to vanadium and medium/large pore based zeolite SCR catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Come for predictions, stay for complexity: synthesis and experimental probing of ionic conductivity in Li 9 B 19 S 33

Lithium thioborates, despite their potential cost-effectiveness and low density, have received considerably less attention as solid electrolytes compared to their thiophosphate counterparts. A primary obstacle to their widespread investigation has been the inherent challenge in synthesizing single-phase materials. Computational studies have predicted several lithium thioborate phases exhibiting high ionic conductivity, with Li 9 B 19 S 33 notably predicted to reach 80 mS cm −1 . However, experimental validation of these theoretical predictions remains absent. This work addresses this gap by detailing a successful synthesis of the previously elusive Li 9 B 19 S 33 phase, facilitated by in situ temperature dependent powder X-ray diffraction. Our findings reveal the peritectic nature of phase formation, necessitating an excess of boron sulfide in the reaction mixture. We further present a comprehensive structural characterization of Li 9 B 19 S 33 utilizing spectroscopic techniques like NMR, FT-IR, and diffuse reflectance and report on its ionic conductivity. Solid-state 6 Li NMR line narrowing experiments revealed an ion mobility activation energy of 0.26 eV whereas activation energies derived from impedance spectroscopy measurements were significantly higher, resulting in lower than theoretically predicted ionic conductivity.

Oppong, Richeal A. [Iowa State Univ., Ames, IA (Un↗

Simultaneous real-time x-ray diffraction spectroscopy, Rutherford backscattering spectrometry, and sheet resistance measurements to study thin film growth kinetics by Kissinger plots

When the Kissinger method is used to investigate thin film growth kinetics, activation energies obtained are often significantly higher than those of Arrhenius plots based on isothermal studies. The reason for the higher activation energies is related to the sensitivity of the Kissinger analysis to nucleation effects. In fact, this often undesirable effect opens the possibility of studying nucleation barriers in a semiquantitative way. Furthermore, we show that these nucleation effects can be filtered out by a more careful application of the Kissinger method, and activation energies that are consistent with Arrhenius plots are then obtained.

36 MATERIALS SCIENCE↗

Application of model-free methods for analysis of combustion kinetics of coals with different ranks

Model-free kinetic approaches were employed to investigate the combustion kinetics of coals with different ranks, namely, lignite, bituminous coal, and anthracite. The experimental data were provided under non-isothermal conditions at different heating rates in the range of 2-25C min{sup -1}. The activation energy values were estimated by two model-free methods, that is, Ozawa-Flynn-Wall and Kissinger-Akahira-Sunose methods. Slightly higher activation energy values were obtained by Ozawa-Flynn-Wall method at a wide range of conversion extent. Variation of activation energy was found to be comparably more significant for lower rank lignite (between 44.82 and 287.56 kJ mol{sup -1}) while less significant for higher rank bituminous coal (between 101.97 and 155.64 kJ mol{sup -1}) and anthracite (between 106.04 and 160.31 kJ mol{sup -1}).

01 COAL, LIGNITE, AND PEAT↗

Translational and Rotational Motion of C8 Aromatics Adsorbed in Isotropic Porous Media (MOF-5): NMR Studies and MD Simulations

For this, we combined nuclear magnetic resonance (NMR) and molecular dynamics (MD) simulation to study xylene behavior in MOF-5, probing the effects of adsorbate geometry in a weakly interacting model isotropic metal organic framework (MOF) system. We employed NMR diffusometry and relaxometry techniques at low field (13 MHz) to quantify the self-diffusion coefficients (D s ) and the longitudinal relaxation times (T 1 ) of xylenes in MOF-5 as a function of temperature at the saturated loading for each xylene. These experiments reveal the translational motion activation energies to be 15.3, 19.7, and 21.2 kj mol -1 and the rotational activation energies to be 47.26, 12.88, and 11.55 for the (p-, m-, o-) xylene isomers, respectively. Paraxylene exhibits faster translational motion, yet shows four times the activation energy barrier for rotational motion vis-à-vis the other isomers. MD simulations performed on these model systems corroborate the findings for paraxylene and suggest that paraxylene has the lower free energy barrier for hopping away from its binding sites, yet has the slowest rotational motion in the plane of the xylene molecule.

36 MATERIALS SCIENCE↗