Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Electromagnetic wave attenuation measurements in a ring-shaped inductively coupled air plasma

An aerocraft with the surface, inlet and radome covered large-area inductive coupled plasma (ICP) can attenuate its radar echo effectively. The shape, thickness, and electron density (N{sub e}) distribution of ICP are critical to electromagnetic wave attenuation. In the paper, an air all-quartz ICP generator in size of 20 × 20 × 7 cm{sup 3} without magnetic confinement is designed. The discharge results show that the ICP is amorphous in E-mode and ring-shaped in H-mode. The structure of ICP stratifies into core region and edge halo in H-mode, and its width and thickness changes from power and pressure. Such phenomena are explained by the distribution of RF magnetic field, the diffusion of negative ions plasma and the variation of skin depth. In addition, the theoretical analysis shows that the N{sub e} achieves nearly uniform within the electronegative core and sharply steepens in the edge. The N{sub e} of core region is diagnosed by microwave interferometer under varied conditions (pressure in range of 10–50 Pa, power in 300–700 W). Furthermore, the electromagnetic wave attenuation measurements were carried out with the air ICP in the frequencies of 4–5 GHz. The results show that the interspaced ICP is still effective to wave attenuation, and the wave attenuation increases with the power and pressure. The measured attenuation is approximately in accordance with the calculation data of finite-different time-domain simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dynamic Imaging Using Ptychography

Here, we demonstrate through experiment an example of “mixed state” reconstruction using x-ray ptychography. We also demonstrate successful imaging of a vibrating sample that has dynamics that are of one order magnitude faster than the measurement times. Furthermore, we show how increased vibrational amplitude leads to an increased population of illumination modes, a characteristic of partial coherence. Implications of a vibrating sample are explored, with its possible use in manipulating coherent wave field mode shapes and coherence properties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Internal solitary waves in a linearly stratified fluid

The mode shapes for internal solitary waves propagating in a linearly stratified fluid of finite depth are determined in the limit of weak stratification. The solutions obtained for both a fixed upper boundary and a free surface are compared with known results for exponential stratification. The profound changes which occur depending on whether the upper surface is fixed or free are derived from the strong influence of the free surface when the stratification is weak. Evidence is presented supporting the conjecture that the free surface can no longer effect qualitative differences in the modal structure when the fluid is heavily stratified.

Weidman, P. D.↗

Wave energy converter buoy with variable geometry

A nonlinear control design technique capitalizes on a wave energy converter comprising a shaped buoy having a variable geometry wave energy. For example, the shaped buoy can have an hourglass (HG) geometry having a variable cone or steepness angle. The HG buoy is assumed to operate in the heave motion of the wave. The unique interaction between the HG buoy and the wave creates a nonlinear cubic storage effect that produces actual energy storage or reactive power during operation. A multi-frequency Bretschneider spectrum wave excitation input was simulated for the HG design both with constant and varying steepness angle profiles which demonstrated further increased power generation with changing sea states for the variable design.

Wilson, David G.↗

Simulation of mesoscale convective response

Results are reported from a transfer of thermodynamic and dynamic data downscale from a two-dimensional mesoscale model to a two-dimensional cloud model and a subsequent examination of the differential convective response of the cloud model to a mesoscale structure. The mesoscale model included a high resolution PBL formulation, with convective forces expressed in a profile of exchange coefficients over the height of the PBL and the magnitude of the surface heat flux. Account was also taken of forcing by long- and short-wave radiation, surface forcing by the surface energy budget, the terrain shape, and possible wave reflection at the top boundary. The slab-symmetric cloud model possessed subgrid-scale features, five types of moisture terms, and a subroutine for accretion processes. The mesoscale environment was observed to have a significant impact on convective response, i.e., the vertical velocity and the cloud water. Various factors which were not included in the study and which must be considered are discussed.

Mcnider, R. T.↗

Waves generated during electron beam emissions from the Space Shuttle

Observations from the SEPAC (Space Experiments with Particle Accelerators) experiment on Spacelab 1 Shuttle mission of waves generated during electron beam emissions are presented. The dependence of the wave intensity on the beam parameters and the Shuttle attitude is outlined, and the shape of the wave spectra are discussed. It is found that the noise in the 0.75- to 10 kHz band has a spectral shape that can be characterized by an f exp -n law, and that the VLF signal level depends on the beam angle to the magnetic field, the strongest emissions being observed for parallel beams. These features are found to be consistent with a drift wave instability.

Neubert, T.↗

High fidelity simulation and analysis of liquid jet atomization in a gaseous crossflow at intermediate Weber numbers

Recent advances in numerical methods coupled with the substantial enhancements in computing power and the advent of high performance computing have presented first principle, high fidelity simulation as a viable tool in the prediction and analysis of spray atomization processes. The credibility and potential impact of such simulations, however, has been hampered by the relative absence of detailed validation against experimental evidence. The numerical stability and accuracy challenges arising from the need to simulate the high liquid-gas density ratio across the sharp interfaces encountered in these flows are key reasons for this. In this work we challenge this status quo by presenting a numerical model able to deal with these challenges, employing it in simulations of liquid jet in crossflow atomization and performing extensive validation of its results against a carefully executed experiment with detailed measurements in the atomization region. We then proceed to the detailed analysis of the flow physics. The computational model employs the coupled level set and volume of fluid approach to directly capture the spatiotemporal evolution of the liquid-gas interface and the sharp-interface ghost fluid method to stably handle high liquid-air density ratio. Adaptive mesh refinement and Lagrangian droplet models are shown to be viable options for computational cost reduction. Moreover, high performance computing is leveraged to manage the computational cost. The experiment selected for validation eliminates the impact of inlet liquid and gas turbulence and focuses on the impact of the crossflow aerodynamic forces on the atomization physics. Validation is demonstrated by comparing column surface wavelengths, deformation, breakup locations, column trajectories and droplet sizes, velocities, and mass rates for a range of intermediate Weber numbers. Analysis of the physics is performed in terms of the instability and breakup characteristics and the features of downstream flow recirculation, and vortex shedding. Formation of “Λ” shape windward column waves is observed and explained by the combined upward and lateral surface motion. The existence of Rayleigh-Taylor instability as the primary mechanism for the windward column waves is verified for this case by comparing wavelengths from the simulations to those predicted by linear stability analyses. Physical arguments are employed to postulate that the type of instability manifested may be related to conditions such as the gas Weber number and the inlet turbulence level. The decreased column wavelength with increasing Weber number is found to cause enhanced surface stripping and early depletion of liquid core at higher Weber number. A peculiar “three-streak-two-membrane” liquid structure is identified at the lowest Weber number and explained as the consequence of the symmetric recirculation zones behind the jet column. It is found that the vortical flow downstream of the liquid column resembles a von Karman vortex street and that the coupling between the gas flow and droplet transport is weak for the conditions explored.

42 ENGINEERING↗

Effect of nonthermality of electrons on the speed and shape of ion-acoustic solitary waves in a warm plasma

Nonlinear ion-acoustic solitary waves in a warm collisionless plasma with nonthermal electrons are investigated by a direct analysis of the field equations. The Sagdeev's potential is obtained in terms of ion acoustic speed by simply solving an algebraic equation. It is found that the amplitude and width of the ion-acoustic solitons as well as the parametric regime where the solitons can exist are sensitive to the population of energetic non-thermal electrons. The soliton and double layer solutions are obtained as a small amplitude approximation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recovery of the Aharonov-Bohm oscillations in asymmetrical quantum rings

We theoretically investigate suppression and recovery of the Aharonov-Bohm oscillations of the diamagnetic response of electrons (holes) confined in self-assembled In{sub c}Ga{sub 1−c}As/GaAs semiconductor reflection asymmetrical quantum rings. Based on the mapping method and gauge-origin-independent definition for the magnetic vector potential we simulate the energies and wave functions of the electron (hole) under external magnetic and electric fields. We examine the transformation of the ground state wave function of the electron (hole) in reflection asymmetrical rings from localized in one of the potential valleys (dotlike shape of the wave function) to distributed over all volume of the ring (ringlike shape) under an appropriate lateral electric field. This transformation greatly recovers the electron (hole) diamagnetic coefficient and Aharonov-Bohm oscillations of the diamagnetic response of the ring. However, the recovering electric field for the first Aharonov-Bohm diamagnetic oscillation of the electron is a suppressing one for the hole (and vice versa). This can block the recovery of the optical Aharonow-Bohm effect in In{sub c}Ga{sub 1−c}As/GaAs asymmetrically wobbled rings. However, the recovery of the Aharonov-Bohm oscillations for the independent electron (hole) by the external electric field remains interesting and feasible objective for the asymmetric rings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Convergent laser beam shapes: Unveiling the dynamics of Laser-induced elastic waves in composite materials

Overcoming the low signal-to-noise ratio (SNR) in laser ultrasonic testing of composite materials remains a significant challenge. Current efforts focus on enhancing SNR by inserting more energy into the material through temporal and/or spatial modulation of the laser beam. However, potential SNR improvements through wave convergence and wave energy manipulation have been overlooked. This paper addresses this gap by demonstrating the convergence of different wave types to a designated point and by showing the feasibility of directing absorbed laser energy into a specific wave type through spatial modulation of the laser beam. To achieve this, mathematical expressions for the convergent laser beams are derived. Various laser beam profiles are then introduced to the thermoelastic equations and solved using the finite element method. The sample under investigation is a transversely isotropic unidirectional carbon fiber reinforced plastic, characterized by anisotropic thermal expansion coefficients and thermal conductivities. Results reveal pronounced convergence of the intended wave type at the center due to laser beam shaping. This study showcases the ability to direct absorbed laser energy toward a specific wave type through spatial modulation of the laser beam and highlights the role of material anisotropy in energy focusing.

composite materials↗

Verification results for the Spectral Ocean Wave Model (SOWM) by means of significant wave height measurements made by the GEOS-3 spacecraft

Significant wave heights estimated from the shape of the return pulse wave form of the altimeter on GEOS-3 for forty-four orbit segments obtained during 1975 and 1976 are compared with the significant wave heights specified by the spectral ocean wave model (SOWM), which is the presently operational numerical wave forecasting model at the Fleet Numerical Weather Central. Except for a number of orbit segments with poor agreement and larger errors, the SOWM specifications tended to be biased from 0.5 to 1.0 meters too low and to have RMS errors of 1.0 to 1.4 meters. The much fewer larger errors can be attributed to poor wind data for some parts of the Northern Hemisphere oceans. The bias can be attributed to the somewhat too light winds used to generate the waves in the model. Other sources of error are identified in the equatorial and trade wind areas.

Pierson, W. J.↗

Investigation of Theoretical Solutions to a Bottom-Raised Oscillating Surge Wave Energy Converter (OSWEC) Through Experimental and Parametric Studies

Experiments were conducted on a wave tank model of a bottom raised oscillating surge wave energy converter (OSWEC) model in regular waves. The OSWEC model shape was a thin rectangular flap, which was allowed to pitch in response to incident waves about a hinge located at the intersection of the flap and the top of the supporting foundation. Torsion springs were added to the hinge in order to position the pitch natural frequency at the center of the wave frequency range of the wave maker. The flap motion as well as the loads at the base of the foundation were measured. The OSWEC was modeled analytically using elliptic functions in order to obtain closed form expressions for added mass and radiation damping coefficients, along with the excitation force and torque. These formulations were derived and reported in a previous publication by the authors. While analytical predictions of the foundation loads agree very well with experiments, large discrepancies are seen in the pitch response close to resonance. These differences are analyzed by conducting a sensitivity study, in which system parameters, including damping and added mass values, are varied. The likely contributors to the differences between predictions and experiments are attributed to tank reflections, standing waves that can occur in long, narrow wave tanks, as well as the thin plate assumption employed in the analytical approach.

analytical↗

Photon wave-packet manipulation via dynamic electromagnetically induced transparency in multilayer structures

We present a theoretical study of the dynamics of a light pulse propagating through a multilayer system consisting of alternating blocks of electromagnetically induced transparency (EIT) media and vacuum. We study the effect of a dynamical modulation of the EIT control field on the shape of the wave packet. Interesting effects due to the group velocity mismatch at the interfaces are found. Modulation schemes that can be realized in ultracold atomic samples with standard experimental techniques are proposed and discussed. Calculations are performed using a modified slowly varying envelope approximation of the Maxwell-Bloch equations and are compared to an effective description based on a continuity equation for the polariton flow.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generation of propagating backward volume spin waves by phase-sensitive mode conversion in two-dimensional microstructures

We present the generation of propagating backward volume (BV) spin waves in a T shaped Ni{sub 81}Fe{sub 19} microstructure. These waves are created from counterpropagating Damon Eshbach spin waves, which are excited using microstrip antennas. By employing Brillouin light scattering microscopy, we show how the phase relation between the counterpropagating waves determines the mode generated in the center of the structure, and prove its propagation inside the longitudinally magnetized part of the T shaped microstructure. This gives access to the effective generation of backward volume spin waves with full control over the generated transverse mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electron acceleration by magnetosonic waves in solar flares

Results of a simulation of electron acceleration by magnetosonic waves in a solar coronal loop are presented. The dependence of the energization rate on the strength and shape of the wave spectrum is discussed. Comparisons are made with the predictions of quasilinear theory and of a model describing stochastic acceleration by waves as isotropic diffusion in momentum space.

Zweibel, Ellen G.↗