SEARCH · Engineering Papers

Results for “variable speed control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS2012

Highlights from a Mach 4 Experimental Demonstration of Inlet Mode Transition for Turbine-Based Combined Cycle Hypersonic Propulsion

NASA is focused on technologies for combined cycle, air-breathing propulsion systems to enable reusable launch systems for access to space. Turbine Based Combined Cycle (TBCC) propulsion systems offer specific impulse (Isp) improvements over rocket-based propulsion systems in the subsonic takeoff and return mission segments along with improved safety. Among the most critical TBCC enabling technologies are: 1) mode transition from the low speed propulsion system to the high speed propulsion system, 2) high Mach turbine engine development and 3) innovative turbine based combined cycle integration. To address these challenges, NASA initiated an experimental mode transition task including analytical methods to assess the state-of-the-art of propulsion system performance and design codes. One effort has been the Combined-Cycle Engine Large Scale Inlet Mode Transition Experiment (CCE-LIMX) which is a fully integrated TBCC propulsion system with flowpath sizing consistent with previous NASA and DoD proposed Hypersonic experimental flight test plans. This experiment was tested in the NASA GRC 10 by 10-Foot Supersonic Wind Tunnel (SWT) Facility. The goal of this activity is to address key hypersonic combined-cycle engine issues including: (1) dual integrated inlet operability and performance issues-unstart constraints, distortion constraints, bleed requirements, and controls, (2) mode-transition sequence elements caused by switching between the turbine and the ramjet/scramjet flowpaths (imposed variable geometry requirements), and (3) turbine engine transients (and associated time scales) during transition. Testing of the initial inlet and dynamic characterization phases were completed and smooth mode transition was demonstrated. A database focused on a Mach 4 transition speed with limited off-design elements was developed and will serve to guide future TBCC system studies and to validate higher level analyses.

Foster, Lancert E.↗

NASA NTRS1976

Technology outlook for aviation

Growth projections for aviation technology are put forth for a quarter-century ahead. Three main trends envisaged are towards: great efficiency and economy and longer range and endurance for subsonic aircraft; new generations of short-range fixed-wing craft and rotorcraft with versatile applicability; supersonic and hypersonic speeds. Improvements in lift/drag ratio, specific fuel consumption, structural weight factor, aerodynamic improvements (laminar flow control, increased wing aspect ratio, drag reduction for specified lift, propulsion efficiency, higher bypass ratios, composite structures) are discussed along with V/STOL, controllable twist rotors, circulation control rotors, variable-cycle engines, and higher structural efficiencies.

Roberts, L.↗

NASA NTRS1989

Energy-absorption capability of composite tubes and beams

In this study the objective was to develop a method of predicting the energy-absorption capability of composite subfloor beam structures. Before it is possible to develop such an analysis capability, an in-depth understanding of the crushing process of composite materials must be achieved. Many variables affect the crushing process of composite structures, such as the constituent materials' mechanical properties, specimen geometry, and crushing speed. A comprehensive experimental evaluation of tube specimens was conducted to develop insight into how composite structural elements crush and what are the controlling mechanisms. In this study the four characteristic crushing modes, transverse shearing, brittle fracturing, lamina bending, and local buckling were identified and the mechanisms that control the crushing process defined. An in-depth understanding was developed of how material properties affect energy-absorption capability. For example, an increase in fiber and matrix stiffness and failure strain can, depending upon the configuration of the tube, increase energy-absorption capability. An analysis to predict the energy-absorption capability of composite tube specimens was developed and verified. Good agreement between experiment and prediction was obtained.

Farley, Gary L.↗

NASA NTRS1990

Real-time fuzzy inference based robot path planning

This project addresses the problem of adaptive trajectory generation for a robot arm. Conventional trajectory generation involves computing a path in real time to minimize a performance measure such as expended energy. This method can be computationally intensive, and it may yield poor results if the trajectory is weakly constrained. Typically some implicit constraints are known, but cannot be encoded analytically. The alternative approach used here is to formulate domain-specific knowledge, including implicit and ill-defined constraints, in terms of fuzzy rules. These rules utilize linguistic terms to relate input variables to output variables. Since the fuzzy rulebase is determined off-line, only high-level, computationally light processing is required in real time. Potential applications for adaptive trajectory generation include missile guidance and various sophisticated robot control tasks, such as automotive assembly, high speed electrical parts insertion, stepper alignment, and motion control for high speed parcel transfer systems.

Pacini, Peter J.↗

NASA NTRS2006

CFD Simulation of the Space Shuttle Launch Vehicle with Booster Separation Motor and Reaction Control System Plumes

The primary objective of this paper is to demonstrate the capability of computational fluid dynamics (CFD) to simulate a very complicated flow field encountered during the space shuttle ascent. The flow field features nozzle plumes from booster separation motor (BSM) and reaction control system (RCS) jets with a supersonic incoming cross flow at speed of Mach 4. The overset Navier-Stokes code OVERFLOW, was used to simulate the flow field surrounding the entire space shuttle launch vehicle (SSLV) with high geometric fidelity. The variable gamma option was chosen due to the high temperature nature of nozzle flows and different plume species. CFD predicted Mach contours are in good agreement with the schlieren photos from wind tunnel test. Flow fields are discussed in detail and the results are used to support the debris analysis for the space shuttle Return To Flight (RTF) task.

Gea, L. M.↗

NASA NTRS2006

CFD Simulation of the Space Shuttle Launch Vehicle with Booster Separation Motor and Reaction Control Plumes

Gea, L. M.↗

NASA NTRS1991

Rotating pressure measurement system using an on board calibration standard

A computer-controlled multichannel pressure measurement system was developed to acquire detailed flow field measurements on board the Large Low Speed Centrifugal Compressor Research Facility at the NASA Lewis Research Center. A pneumatic slip ring seal assembly is used to transfer calibration pressures to a reference standard transducer on board the compressor rotor in order to measure very low differential pressures with the high accuracy required. A unique data acquisition system was designed and built to convert the analog signal from the reference transducer to the variable frequency required by the multichannel pressure measurement system and also to provide an output for temperature control of the reference transducer. The system also monitors changes in test cell barometric pressure and rotating seal leakage and provides an on screen warning to the operator if limits are exceeded. The methods used for the selection and testing of the the reference transducer are discussed, and the data acquisition system hardware and software design are described. The calculated and experimental data for the system measurement accuracy are also presented.

Senyitko, Richard G.↗

NASA NTRS1991

Solar control of the earth's emission of energetic O(+)

Energetic (0.1-16 keV/e) O(+) data obtained in the earth's plasma sheet (between 10 and 23 RE) by an ion mass spectrometer on the ISEE-1 spacecraft are compared statistically with published data on the concurrent solar wind and IMF. The most strongly variable parameter of the plasma sheet O(+) is its density, which is found to be well correlated with certain solar wind parameters, especially with the solar wind flow speed and the IMF component perpendicular to the flow vector. When those two solar wind parameters are combined to form an electric field (-v x B), both the number density and the energy density of the O(+) are found to vary in proportion to the square of that electric field, on average, suggesting that the emission of energetic O(+) ions from the earth may be powered by that same field. Based on this and on the previously published correlation with solar activity, it is argued that the emission of O(+) is controlled by a combination of HF (ionizing) and quasi-static (accelerating) solar electromagnetic fields.

Lennartsson, W.↗

NASA NTRS1978

Effects of errors on decoupled control systems

Various error sources in a decoupled control system are considered in connection with longitudinal control on a simulated externally blown jet-flap STOL aircraft. The system employed the throttle, horizontal tail, and flaps to decouple the forward velocity, pitch angle, and flight-path angle. The errors considered were: (1) imperfect knowledge of airplane aerodynamic and control characteristics; (2) imperfect measurements of airplane state variables; (3) change in flight conditions, and (4) lag in the airplane controls and in engine response. The effects of the various errors on the decoupling process were generally minor. Significant coupling in flight-path angle was caused by control lag during speed-command maneuvers. However, this coupling could be eliminated by including the control lag in the design of the decoupled system. Other error sources affected primarily the commanded response quantity.

Hamer, H. A.↗

NASA NTRS1997

Hybrid Electric Transit Bus

A government, industry, and university cooperative is developing an advanced hybrid electric city transit bus. Goals of this effort include doubling the fuel economy compared to current buses and reducing emissions to one-tenth of current EPA standards. Unique aspects of the vehicle's power system include the use of ultra-capacitors as an energy storage system, and a planned natural gas fueled turbogenerator developed from a small jet engine. Power from both the generator and energy storage system is provided to a variable speed electric motor attached to the rear axle. At over 15000 kg gross weight, this is the largest vehicle of its kind ever built using ultra-capacitor energy storage. This paper describes the overall power system architecture, the evolution of the control strategy, and its performance over industry standard drive cycles.

Viterna, Larry A.↗

NASA NTRS1973

Supersonic aerodynamic characteristics of a variable-geometry spacecraft designed for high hypersonic performance

An investigation was made in the high Mach number test section of the Langley Unitary Plan wind tunnel on a variable-geometry high hypersonic performance spacecraft concept at Mach numbers from 2.30 to 4.63. The basic lifting body is designed for hypersonic lift-drag ratio near 3.0. The variable-geometry feature is a single-pivot two-position high wing which is deployed at subsonic speeds to improve vehicle landing characteristics. For the present investigation the wing was maintained in a stowed position, and the effects of horizontal stabilizer dihedral, elevon control effectiveness, and the addition of either a conventional single vertical tail or dorsal-fin-type vertical stabilizers on the longitudinal and lateral-directional stability and control characteristics were studied.

Spencer, B., Jr.↗

NASA NTRS1977

The effect of variations in controls and displays on helicopter instrument approach capability

A flight investigation was conducted with a variable stability helicopter to determine the effects of variations in controls and displays on helicopter instrument approach capabilities. The baseline instrument approach task was a decelerating approach to a hover along a 6 deg glide slope. Pilot evaluations were obtained for both the constant speed part of the task and the deceleration and hover part of the task. The attitude stability augmentation system (SAS) was strongly preferred over the rate SAS because the aircraft had a divergent pitch response. From a display variation standpoint, it was not possible to decelerate to a hover in a consistent manner, regardless of the control system employed, with situation information only. In particular, the deceleration and hover part of the task was unacceptable without flight director command information.

Niessen, F. R.↗

NASA NTRS1977

Capabilities of the Navy variable stability X-22A for V/STOL flying qualities R and D

The X-22A V/STOL Flight Research Facility which provides in-flight simulation capability applicable to hover, low speed, and transition flight investigation of fixed wing V/STOL flying is described. The variable stability system, the guidance and display equipment, the data acquisition and processing system, and the ground simulator are included. Research programs involving the STOL flying qualities for landing approach, the control system, display, and guidance requirements for VTOL aircraft instrument approach and landing, and the expansion of the adverse weather operation capabilities of the Navy's VTOL aircraft are briefly summarized.

Aiken, E. W.↗

NASA NTRS1992

Combustion instability analysis for liquid propellant rocket engines

The multi-dimensional numerical model has been developed to analyze the nonlinear combustion instabilities in liquid-fueled engines. The present pressure-based approach can handle the implicit pressure-velocity coupling in a non-iterative way. The additional scalar conservation equations for the chemical species, the energy, and the turbulent transport quantities can be handled by the same predictor-corrector sequences. This method is time-accurate and it can be applicable to the all-speed, transient, multi-phase, and reacting flows. Special emphasis is given to the acoustic/vaporization interaction which may act as the crucial rate-controlling mechanism in the liquid-fueled rocket engines. The subcritical vaporization is modeled to account for the effects of variable thermophysical properties, non-unitary Lewis number in the gas-film, the Stefan flow effect, and the effect of transient liquid heating. The test cases include the one-dimenisonal fast transient non-reacting and reacting flows, and the multi-dimensional combustion instabilities encountered in the liquid-fueled rocket thrust chamber. The present numerical model successfully demonstrated the capability to simulate the fast transient spray-combusting flows in terms of the limiting-cycle amplitude phenomena, correspondence between combustion and acoustics, and the steep-fronted wave and flame propagation. The investigated parameters include the spray initial conditions, air-fuel mixture ratios, and the engine geometry. Stable and unstable operating conditions are found for the liquid-fueled combustors. Under certain conditions, the limiting cycle behavior of the combusting flowfields is obtained. The numerical results indicate that the spray vaporization processes play an important role in releasing thermal energy and driving the combustion instability.

Kim, Y. M.↗

NASA NTRS1974

Low speed wind tunnel tests of a 1/9-scale model of a variable-sweep advanced supersonic transport

Tests have been conducted in the Langley full-scale tunnel to determine the aerodynamic characteristics of a 1/9-scale variable-sweep advanced supersonic transport configuration. The model configurations investigated were the basic unflapped arrangement, and a takeoff and landing flap arrangement with several strake leading edge flow control devices. The tests were conducted for an angle-of-attack range from about minus 5 deg to 36 deg and a sideslip range from minus 5 deg to 10 deg. The tests were conducted for a range of Reynolds number from 3.92 million to 5.95 million corresponding to test velocities of about 54.5 knots and 81.7 knots, respectively.

Mclemore, H. C.↗

NASA NTRS1986

Aerodynamic design trends for commercial aircraft

Recent research on advanced-configuration commercial aircraft at DFVLR is surveyed, with a focus on aerodynamic approaches to improved performance. Topics examined include transonic wings with variable camber or shock/boundary-layer control, wings with reduced friction drag or laminarized flow, prop-fan propulsion, and unusual configurations or wing profiles. Drawings, diagrams, and graphs of predicted performance are provided, and the need for extensive development efforts using powerful computer facilities, high-speed and low-speed wind tunnels, and flight tests of models (mounted on specially designed carrier aircraft) is indicated.

Hilbig, R.↗

NASA NTRSDate not supplied

Inlet Performance of the NFAC 1/50th-scale 80- by 120- Foot Wind Tunnel

The National Full-Scale Aerodynamics Complex 80- by 120-Foot Wind Tunnel (80x120) was dedicated in 1987 and rated at 100 knots for full-scale aircraft testing at NASA Ames Research Center. The 80x120 is the world’s largest wind tunnel, designed as an open circuit tunnel with a large aerodynamically treated inlet open to the ambient atmospheric air. In 2017, damage was sustained within the wind tunnel drive system, opening a window to do testing using the existing 1/50th-scale model of the 80- by 120-Foot Wind Tunnel within the full-scale 80- by 120-Foot Wind tunnel test section. The objective of the research was to quantify the turbulence levels within the 1/50th-scale test section as a function of onset atmospheric wind direction (± 90 deg from tunnel center-line), variable test section speed (5 – 50 m/s) and purposeful obtrusion of wind flow into the inlet. The model wind tunnel inlet, contraction, and test section are geometrically identical to that of the full-scale wind tunnel and model testing provides aerodynamic performance characteristics under controlled test conditions allowing for insight into the full-scale test section flow quality. The test section turbulence levels are minimally affected by the onset direction of the ambient atmospheric wind, but are dramatically affected by the speed in the tunnel while operated in the presence of winds. Original design specifications were axial/vertical/lateral turbulence ≤ 0.5% at maximum test section speed, though early full scale tunnel testing determined that lateral turbulence would be ≤ 0.6%. For test section speeds ≥ 30 m/s the tunnel is within the design specification limits. Between 5 m/s and 30 m/s, the test section turbulence levels are dependent on the onset wind direction and test section speed where test section turbulence in the axial, vertical and lateral directions was seen to be between 0.5% and 1% and, at times, greater than 1%. Finally, testing was performed with blockage designs at the inlet to disrupt the wind flow quality entering the tunnel contraction zone in an attempt to create higher levels of turbulence for high turbulent test conditions simulating the earth’s boundary layer. The highest turbulence levels measured were 6% in the axial direction by use of large spires designed to obstruct ≈ 50% of the inlet area.

Inlet Performance↗

NASA NTRS2022

Winds at the Mars 2020 Landing Site: 1. Near-Surface Wind Patterns at Jezero Crater

This is the first part of a two-part paper. NASA's Mars 2020 Perseverance rover measured winds on the Jezero crater floor close to the delta of an ancient river. A mostly repeatable diurnal cycle was observed and presented two regimes: (a) a convective regime, from dawn to sunset, with average easterly to southeasterly winds, during which maximum wind speeds were measured, and (b) a nighttime regime with westerly-northwesterly winds followed by a relatively calm period with highly variable wind directions as a function of sol and time of night. The timing and magnitude of the observed regimes are consistent with primary control by regional and local slope flows. Data suggest that the surface circulation at Jezero region in northern spring and summer is highly unaffected by large-scale circulation except during particular periods in the diurnal cycle or generally during dust storms, which is supported by MarsWRF model simulations. Consequently, the observed seasonal variability was weak. However, sol-to-sol and seasonal variability were measured, most of it during certain nighttime periods. Traveling waves consistent with baroclinic instability were clearly observed in surface winds at L_s ∼ 75°. The early MY36/2022A regional dust storm at L_s ∼ 153° disturbed the wind patterns with changes suggesting enhanced tidal flows. After sunset, the dust storm also produced detectable gravity wave activity, increasing the mixing in the nighttime planetary boundary layer during storm conditions. Inferred wind directions from dust devil movies strongly suggest that prevailing winds continued to be slope-driven during the late summer, fall and early winter seasons.

D. Viúdez-Moreiras↗