Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “unit dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2020

Subseasonal-to-Seasonal Hindcast Skill Assessment of Ridging Events Related to Drought Over the Western United States

Persistent atmospheric ridging events centered near the western United States are associated with widespread precipitation deficits and meteorological drought. Due to the relatively low skill of- dynamical models in forecasting precipitation on subseasonal‐to‐seasonal (S2S) time scales across this region, forecasts of ridging are explored in this study as a potential bridge for early warning drought prediction. To assess skill, we evaluate deterministic and probabilistic S2S hindcasts (out to 6 week lead time) of ridging events and geopotential height anomalies over the western United States in five ensemble hindcast systems. Prediction skill for ridging events is shown to be highly variable across models. For some models, longer‐time‐averaged patterns of geopotential height anomalies across the first 6 weeks can be skillfully simulated, when evaluated probabilistically against climatology. The most skillful models show modest skill in forecasting above normal ridging occurrences at lead times of Weeks 3–4 and Weeks 5–6,with some sensitivity to the specific ridge location and method for determining skill. Using the European Centre for Medium‐Range Weather Forecasts (ECMWF) model as a case study, longer lead time forecast busts are shown to often occur under extended periods of highly active La Nina‐like tropical convection. Model errors at simulating these tropical convection features may have a disproportionately large impact and degrade downstream forecasts over the western United States. Despite the documented model shortcomings, our results highlight an opportunity to target skillful ridging forecasts from dynamical models for improving early warning drought forecasting at S2S lead times.

S2S↗
NASA NTRS1996

The Role of Musculoskeletal Dynamics and Neuromuscular Control in Stress Development in Bone

The role of forces produced by the musculotendon units in the stress development of the long bones during gait has not been fully analyzed. It is well known that the musculotendons act as actuators producing the joint torques which drive the body. Although the joint torques required to perform certain motor tasks can be recovered through a kinematic analysis, it remains a difficult problem to determine the actual forces produced by each muscle that resulted in these torques. As a consequence, few studies have focused on the role of individual muscles in the development of stress in the bone. This study takes a control theoretic approach to the problem. A seven-link, eight degrees of freedom model of the body is controlled by various muscle groups on each leg to simulate gait. The simulations incorporate Hill-type models of muscles with activation and contraction dynamics controlled through neural inputs. This direct approach allows one to know the exact muscle forces exerted by each musculotendon throughout the gait cycle as well the joint torques and reaction forces at the ankle and knee. Stress and strain computed by finite element analysis on skeletal members will be related to these derived loading conditions. Thus the role of musculoskeletal dynamics and neuromuscular control in the stress development of the tibia during gait can be analyzed.

DeWoody, Yssa↗
NASA NTRS1975

Shake test of rotor test apparatus in the 40- by 80-foot wind tunnel

A shake test was conducted to determine the dynamic characteristics of a rotor test apparatus on strut systems. The rotor-off hub transfer function (acceleration per unit force as a function of frequency) was measured in the longitudinal and lateral directions, using a combination of broadband and discrete frequency excitation techniques. The dynamic data is summarized for the configurations tested, giving the following properties for each mode identified: the natural frequency, the hub response at resonance, and the fixed system damping. The complete transfer functions are presented, and the detailed test results are included as an appendix. Data analysis techniques developed to obtain on-line measurements of the system modal properties, including the damping coefficient and the damping ratio are discussed.

Johnson, W.↗
NASA NTRS1990

A nonlinear model of the phasic dynamics of muscle activation

A phasic excitation-activation (PEXA) model is presented of the process of motoneuron excitation and the resultant activation and force development of a motor unit. The model input is an amount of depolarizing current (as when injected with an intracellular electrode), and the model output is muscle force. The model includes dynamics and nonlinearities similar to phenomena discovered experimentally by others: the firing rate response of motoneurons to steps of depolarizing current and the catch-like enhancement of force produced by overlapping motor neuron action potentials. The parameter values used in this model are derived from experimentally measured data and are expressed in physical units. Model predictions extend to published data beyond those used in generating the model parameter values.

Hannaford, Blake↗
NASA NTRS1978

Telemetry of intracranial pressure

A completely implantable epidural pressure telemetry system designed for accurate measurement of intracranial pressure (ICP) is described. The implant device is batteryless, providing unlimited operating life. The described system uses a capacitive pressure transducer with excellent long-term stability. Once detected with the transducer and converted to a frequency with the oscillator electronics, the pressure signal is digitized. It is then telemetered without the possibility of further degradation. After detection with the small external module, the data can be retransmitted by a radio link for complete patient mobility or the energizer signal pickup module can be wired to a bedside readout unit. Continuous data are available from the system so that the dynamic ICP changes reflecting arterial blood pressure can be observed and used for diagnosis.

Fryer, T. B.↗
NASA NTRS1982

Observation of a heated electron population associated with the 6300 A SAR arc emission

Conjunctive observations of the Dynamics Explorer satellite pair and the Pacific Northwest Laboratory scanning photometer unit at Richland, WA have allowed identification of the low energy, heated, electron population associated with the 6300 A Stable Auroral Red (SAR) arc emission. Measurements over the SAR arc on day 296 of 1981 show an enhanced flux in the low altitude 5-12 eV electrons. Analysis of this electron population shows them to be fairly Maxwellian, with temperatures on the order of 9900 + or - 1100 K and an earthward field aligned velocity of approximately 275 + or - 60 km/sec. The electrons are not accompanied by ion precipitation. The ion loss cone is empty at least as high as 6000 km. This fact may cast some doubt as to the role of the ring current ions in the SAR arc production.

Gurgiolo, C.↗
NASA NTRS1984

Plans for a fast image recording system at ESO

A 256 diode-array will be installed as detector on the ESO OPTRONICS S-3000 measuring machine in order to increase the acquisition rate. A high intensity LED will be used as light source in a pulse mode. The data will be stored on a random access mass storage device as density values for later education. The scanning time for a 30 cm x 30 cm plate with a step size of 10 micron will be less than 10 hours while the dynamic range of the data is expected to be 2.5 density units with an offset of at least 1 unit.

Grosboel, P. J.↗
NASA NTRS1992

Neurodynamical model of collective brain

A dynamical system which mimics collective purposeful activities of a set of units of intelligence is introduced and discussed. A global control of the unit activities is replaced by the probabilistic correlations between them. These correlations are learned during a long term period of performing collective tasks, and are stored in the synaptic interconnections. The model is represented by a system of ordinary differential equations with terminal attractors and repellers, and does not contain any man-made digital devices.

Zak, Michail↗
NASA NTRS1994

Robotic experiment with a force reflecting handcontroller onboard MIR space station

During the French CASSIOPEE mission that will fly onboard MIR space station in 1996, ergonomic evaluations of a force reflecting handcontroller will be performed on a simulated robotic task. This handcontroller is a part of the COGNILAB payload that will be used also for experiments in neurophysiology. The purpose of the robotic experiment is the validation of a new control and design concept that would enhance the task performances for telemanipulating space robots. Besides the handcontroller and its control unit, the experimental system includes a simulator of the slave robot dynamics for both free and constrained motions, a flat display screen and a seat with special fixtures for holding the astronaut.

Delpech, M.↗
NASA NTRS1995

Multiprocessor Adaptive Control Of A Dynamic System

Architecture for fully autonomous digital electronic control system developed for use in identification and adaptive control of dynamic system. Architecture modular and hierarchical. Combines relatively simple, standardized processing units into complex parallel-processing subsystems. Although architecture based on neural-network concept, processing units themselves not neural networks; processing units implemented by programming of currently available microprocessors.

Juang, Jer-Nan↗
NASA NTRS1996

Multiple-Fiber-Optic Probe For Light-Scattering Measurements

Multiple-fiber-optical probe developed for use in measuring light scattered at various angles from specimens of materials. Designed for both static and dynamic light-scattering measurements of colloidal dispersions. Probe compact, rugged unit containing no moving parts and remains stationary during operation. Not restricted to operation in controlled, research-laboratory environment. Positioned inside or outside light-scattering chamber. Provides simultaneous measurements at small angular intervals over range of angles, made to include small scattering angles by orienting probe in appropriate direction.

Dhadwal, Harbans Singh↗
NASA NTRS2006

Radiometric Characterization Results for the IKONOS, Quickbird, and OrbView-3 Sensor

Radiometric calibration of commercial imaging satellite products is required to ensure that science and application communities better understand commercial imaging satellite properties. Inaccurate radiometric calibrations can lead to erroneous decisions and invalid conclusions and can limit intercomparisons with other systems. To address this calibration need, the NASA Applied Sciences Directorate (ASD) at Stennis Space Center established a commercial satellite imaging radiometric calibration team consisting of three independent groups: NASA ASD, the University of Arizona Remote Sensing Group, and South Dakota State University. Each group independently determined the absolute radiometric calibration coefficients of available high-spatial-resolution commercial 4-band multispectral products, in the visible though near-infrared spectrum, from GeoEye(tradeMark) (formerly SpaceImaging(Registered TradeMark)) IKONOS, DigitalGlobe(Regitered TradeMark) QuickBird, and GeoEye (formerly ORBIMAGE(Registered TradeMark) OrbView. Each team member employed some variant of reflectance-based vicarious calibration approach, requiring ground-based measurements coincident with image acquisitions and radiative transfer calculations. Several study sites throughout the United States that covered a significant portion of the sensor's dynamic range were employed. Satellite at-sensor radiance values were compared to those estimated by each independent team member to evaluate the sensor's radiometric accuracy. The combined results of this evaluation provide the user community with an independent assessment of these sensors' absolute calibration values.

Holekamp, Kara↗
NASA NTRS2011

Space Shuttle Guidance, Navigation, and Rendezvous Knowledge Capture Reports

This document is a catalog and readers guide to lessons learned, experience, and technical history reports, as well as compilation volumes prepared by United Space Alliance personnel for the NASA/Johnson Space Center (JSC) Flight Dynamics Division.1 It is intended to make it easier for future generations of engineers to locate knowledge capture documentation from the Shuttle Program. The first chapter covers observations on documentation quality and research challenges encountered during the Space Shuttle and Orion programs. The second chapter covers the knowledge capture approach used to create many of the reports covered in this document. These chapters are intended to provide future flight programs with insight that could be used to formulate knowledge capture and management strategies. The following chapters contain descriptions of each knowledge capture report. The majority of the reports concern the Space Shuttle. Three are included that were written in support of the Orion Program. Most of the reports were written from the years 2001 to 2011. Lessons learned reports concern primarily the shuttle Global Positioning System (GPS) upgrade and the knowledge capture process. Experience reports on navigation and rendezvous provide examples of how challenges were overcome and how best practices were identified and applied. Some reports are of a more technical history nature covering navigation and rendezvous. They provide an overview of mission activities and the evolution of operations concepts and trajectory design. The lessons learned, experience, and history reports would be considered secondary sources by historians and archivists.

John L Goodman↗
NASA NTRS2012

International Space Station Modal Correction Analysis

This paper summarizes the on-orbit modal test and the related modal analysis, model validation and correlation performed for the ISS Stage ULF4, DTF S4-1A, October 11,2010, GMT 284/06:13:00.00. The objective of this analysis is to validate and correlate analytical models with the intent to verify the ISS critical interface dynamic loads and improve fatigue life prediction. For the ISS configurations under consideration, on-orbit dynamic responses were collected with Russian vehicles attached and without the Orbiter attached to the ISS. ISS instrumentation systems that were used to collect the dynamic responses during the DTF S4-1A included the Internal Wireless Instrumentation System (IWIS), External Wireless Instrumentation System (EWIS), Structural Dynamic Measurement System (SDMS), Space Acceleration Measurement System (SAMS), Inertial Measurement Unit (IMU) and ISS External Cameras. Experimental modal analyses were performed on the measured data to extract modal parameters including frequency, damping and mode shape information. Correlation and comparisons between test and analytical modal parameters were performed to assess the accuracy of models for the ISS configuration under consideration. Based on the frequency comparisons, the accuracy of the mathematical models is assessed and model refinement recommendations are given. Section 2.0 of this report presents the math model used in the analysis. This section also describes the ISS configuration under consideration and summarizes the associated primary modes of interest along with the fundamental appendage modes. Section 3.0 discusses the details of the ISS Stage ULF4 DTF S4-1A test. Section 4.0 discusses the on-orbit instrumentation systems that were used in the collection of the data analyzed in this paper. The modal analysis approach and results used in the analysis of the collected data are summarized in Section 5.0. The model correlation and validation effort is reported in Section 6.0. Conclusions and recommendations drawn from this analysis are included in Section 7.0.

Fotz[atrocl. Lrostom↗
NASA NTRS1993

Power Processing Units for High Powered Solar Electric Propulsion Using MPD Thrusters

The power of various multimegawatt (MMW) vehicles required for deep space missions such asthe Mars Missions in the stipulated time frame of years 2000-2015 ranges from 5 to 100 MWe. Thispaper summarizes an evaluation of high-power processing units (PPUs) for MMW solar electricpropulsion (SEP) vehicles using advanced magnetoplasma- dynamic (MPD) thrusters. Each PPUprovides DC-DC conversion and voltage matching between the phovoltaic power system and the MPDthrusters. The power system consists of DC-DC converter using MCTs. The PPUs are thencombined with contractors to provide PPU input and output isolation, and to allow switching betweenoperating and spare (redundant) PPUs and thrusters as needed. Based on analyses, it is found thatsignificant economies of scale are possible for PPUs that supply power to MPD thrusters operating at0.1 to 5 MWe per thruster.

Frisbee, R. H.↗
NASA NTRSDate not supplied

Computational Investigation of the Effect of Chemistry on Mars Supersonic Retropropulsion Environments

Retropropulsion ground tests require significant compromises on physical scale, instrumentation, configuration, and environments. Matching the full Martian environment is simply not possible on Earth. Ground tests of retropropulsion configurations thus far have neglected effects of chemistry due to physical constraints of wind tunnel models and facilities; most experiments use inert simulant gases at relatively low temperatures. As such, a strong reliance on high-fidelity computational analyses is required to expand the knowledge of retropropulsion aerodynamics. In this work, we investigate the effects of chemistry using scale-resolving computational fluid dynamics (CFD) with finite-rate chemistry and a graphics processing unit (GPU)-enabled implementation of the NASA FUN3D flow solver on a human-scale Mars lander concept at supersonic freestream conditions. Results are compared to previous perfect gas simulations.

retropropulsion↗
NASA NTRSDate not supplied

Computational Investigation of the Effect of Chemistry on Mars Supersonic Retropropulsion Environments

Retropropulsion ground tests require significant compromises on physical scale, instrumentation, configuration, and environments. Matching the full Martian environment is simply not possible on Earth. Ground tests of retropropulsion configurations thus far have neglected effects of chemistry due to physical constraints of wind tunnel models and facilities; most experiments use inert simulant gases at relatively low temperatures. As such, a strong reliance on high-fidelity computational analyses is required to expand the knowledge of retropropulsion aerodynamics. In this work, we investigate the effects of chemistry using scale-resolving computational fluid dynamics (CFD) with finite-rate chemistry and a graphics processing unit (GPU)-enabled implementation of the NASA FUN3D flow solver on a human-scale Mars lander concept at supersonic freestream conditions. Results are compared to previous perfect gas simulations.

retropropulsion↗
NASA NTRSDate not supplied

Computational Investigation of the Effect of Chemistry on Mars Retropropulsion Environments using a Massively Parallel GPU Approach

In this work, we investigate the effects of chemistry on a human-scale Mars lander concept using scale-resolving computational fluid dynamics (CFD) with finite-rate chemistry and a graphics processing unit (GPU)-enabled implementation of the NASA FUN3D flow solver, enabling run-times of a few days for the simulations presented. Simulations are carried out on Summit at Oak Ridge Leadership Computing Facility using thousands of GPUs. Retropropulsion ground tests require significant compromises on physical scale, instrumentation, configuration, and environments. Ground tests of retropropulsion configurations thus far have neglected effects of chemistry due to physical constraints of wind tunnel models and facilities; most experiments use inert simulant gases at low temperatures. As such, a strong reliance on high-fidelity computational analyses such as those presented in this work is required to expand the knowledge of retropropulsion aerodynamics. An overview of the GPU approach will be presented. Results are compared to a previous scaled perfect gas (air) campaign.

retropropulsion↗