SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This fact sheet summarizes the National Renewable Energy Laboratory’s (NREL’s) State, Local, and Tribal Technical Support Services Agreement contract mechanism. The service extends the benefits of national laboratory expertise to state and local energy project decision makers and planners charting the course to a clean energy future.
The U.S. Department of Energy’s Onsite Energy Technical Assistance Partnerships help industrial and other large energy users transition to clean energy, lower costs, reduce emissions, and contribute to a clean energy economy.
The technical and economic performance as well as the load-following capabilities of grid-connected geothermal hybrid systems were assessed in this work. The analyzed geothermal hybrid configuration is composed of a binary geothermal plant integrated with a concentrating solar-thermal system and underground thermal energy storage (UTES) through a primary heat exchanger. Physics-based models for the hybrid system for plant generation capacities of 1, 25, and 50 MW were developed from validated models for each subsystem. Also, an economic model was developed that accounts for different hybrid system capabilities, solar field sizes, and thermal storage duration. The advantage of the geothermal hybrid system was assessed by comparing the performance with the baseline benchmark geothermal plant with a similar configuration and generation capacity. It was found that hybridizing geothermal plants with concentrating solar and thermal energy storage not only improves the thermal efficiency by up to 8 percentage points when additional heat from the solar-UTES loop rises the evaporator temperatures from 70 to 125 °C, but also enhances the load-following capability for the geothermal plant, which can meet a typical residential load profile with a power rate of change 0.25 kW/s with an absolute error under 13 kW for a 1 MW plant. Other benefits of hybridization include resource preservation and a potential LCOE reduction of up to 56% for a 50 MW geothermal hybrid plant having a 50% solar share, a 1.4 solar multiple, and 24-h storage capacity. The results presented in this work demonstrate that hybridizing geothermal systems transforms them into a flexible and cost-effective solution for addressing the dynamic requirements of modern electric grids.
We report there is rising interest globally in the use of hydrogen for the provision of electricity or heat to industry, transport, and other applications in low-carbon energy systems. While there is attention to build out dedicated hydrogen infrastructure in the long-term, blending hydrogen into the existing natural gas pipeline network is also thought to be a promising strategy for incorporating hydrogen in the near-term. However, hydrogen injection into the existing gas grid poses additional challenges and considerations related to the ability of current gas infrastructure to operate with blended hydrogen levels. This review paper focuses on analyzing the current understanding of how much hydrogen can be integrated into the gas grid from an operational perspective and identifies areas where more research is needed. The review discusses the technical limits in hydrogen blending for both transmission and distribution networks; facilities in both systems are analyzed with respect to critical operational parameters, such as decrease in energy density, increased flow speed and pressure losses. Safety related challenges such as, embrittlement, leakage and combustion are also discussed. The review also summarizes current regulatory limits to hydrogen blending in different countries, including ongoing or proposed pilot hydrogen blending projects.
Lignin is the second most abundant biopolymer and the main source of aromatic structures on earth. Lignin has long been produced as a byproduct of the pulping process and utilized in low value-added applications like heat. However, lignin has received increased attention in recent years to improve its value through various chemical processes. This Review compiles recent progress in synthesis, properties, and applications of lignin-based materials. The lignin for material applications can often be classified into three categories: technical bulk lignin (TBL), lignin-derived oligomers (LDOs), and lignin-derived phenols (LDPs). Furthermore, this Review focuses on the chemical modifications of TBLs and their applications in novel smart materials like self-healing, stimulus responsive, and shape memory polymers. The conversion of TBL to polymers can be briefly divided into two steps: (1) introduction of polymerizable functional groups into the lignin backbone and (2) polymerization that achieves desired materials. Both lignin functionalization and polymerization approaches are discussed in detail. As such, this work attempts to provide a comprehensive overview that highlights the importance of these approaches for the utilization of the abundant but largely ignored biopolymer.
Nuclear Fuel Cycle and Supply Chain (NFCSC) Technical Monthly February FY-20
The purpose of this paper is twofold. First, it will demonstrate how technical cooperation on verification contributed to the softening of tensions and the improvement of trust between the United States and the Soviet Union. Because the scope of this endeavor is too broad to be adequately considered in the length of this work, the primary focus will be on the private and public partnerships on seismic and hydroacoustic test ban treaty verification that were forged between Soviet and American scientists from 1986-1988. In order to orient the analysis within the political-scientific landscape of the time, the discussion begins with a brief description of the arms control landscape in the early 1980s, including both the stances of the Reagan and Gorbachev administrations vis a vis nuclear test ban verification. The section concludes with an analysis of the two primary US-USSR collaborative projects in this key sphere – the test ban verification project conducted by the National Resources Defense Council (NRDC) and Soviet Academy of Sciences (SAS) and the Joint Verification Experiment (JVE) between the US and Soviet National Laboratories.
Nuclear Fuel Cycle and Supply Chain (NFCSC) (FY2020 July Technical Monthly)
The National Renewable Energy Laboratory (NREL) in partnership with USAID Mexico's Low Emissions Development (MLED) II program explored the technical feasibility of transit bus electrification in Mexico City (CDMX) and León. NREL and USAID engaged CDMX and León transit agencies to understand routes of interest and existing fleet fueling and bus specifications.
The US Department of Energy-Office of Indian Energy's (DOE-IE) support for NANA's establishment of an Inter-Tribal Assistance Network in the Northwest Arctic was a ground-breaking effort that led to many individual community successes and a regional escalation of clean energy for our tribes. Before this grant award was initiated, high penetration renewable-diesel hybrid systems were primarily aspirational. Now, after five years of intensive technical assistance and multi-institution collaboration and funding, the NANA Region has three high penetration solar-wind-battery-diesel hybrid systems and one solar-battery-diesel hybrid system fully operational with diesel-off operation occurring regularly; another solar-battery-diesel hybrid system fully funded with an RFP for construction targeted for 2023; a current grant application that was awarded to begin the final design process for solar-battery-diesel hybrid systems for four other villages in the region; and initial funding to begin a high penetration wind-battery-diesel system for the remaining village in the region. Clearly, our goal to demonstrate and replicate high penetration renewable hybrid technology has been accomplished and is increasing in scale and pace.
The study evaluates the technical potential of offshore wind (OSW) energy for the contiguous United States. Critical updates from previous estimates include updating and quantifying assumptions around spatial siting constraints, capacity density, depth limits, and inclusion of the Great Lakes.
This issue brief provides an overview of key technical requirements for inverter-based resources - including distributed energy resources (DERs) - to support the reliable and safe operation of the Providencia Island electrical grid, and other island or isolated area mini-grid applications. With the planned increase in inverter-based resources and the introduction of energy storage, adopting Institute of Electrical and Electronics Engineers (IEEE) Std 1547-2018, including the more advanced performance capabilities for voltage and frequency ride-through, will simplify interconnection as well as help to maintain a safe, reliable grid on Providencia Island.
This presentation highlights NREL's floating solar PV (FPV) research to-date, with a specific focus on technical potential assessments.
Estimates of the potential of renewable energy are essential for understanding how we can decarbonize our electric grid and economy. They provide key data for policymakers, land managers, and energy modelers by defining the quantity, quality, and cost of renewable resources. However, estimating renewable energy potential is challenging and requires frequent updates because of rapid advances in technology, cost reductions, and uncertainty about developable land that are due to social, regulatory, and environmental factors. Additionally, the complex processes involved in renewable energy development require regular reviews of methods and assumptions, which can also impact our understanding of renewable potential. In this, the 2023 edition of this annual report, we present new estimates of the technical potential for land-based wind and solar photovoltaics (PV) for the contiguous United States (CONUS). We also provide cost estimates for the available resources, presenting representative supply curves that can be used in downstream modeling and analysis. Additionally, we introduce the new methodologies used to estimate wind capacity, wind energy losses, transmission cost and representation, updated technology cost and design, and scenarios of siting constraints designed to help bound the uncertainty of renewable potential.
Technical assistance (TA) programs can provide organizations and communities with the information, tools, and resources needed to support their development and resilience goals. The Energy Storage for Social Equity (ES4SE) TA program sought to empower undeserved communities through co-development of energy storage pathways and solutions to address community-defined challenges and needs. Evaluating the design, implementation, and outcomes of TA programs like ES4SE is critical to understanding whether program and participant goals were accomplished and how to adjust the TA approach to better meet participant needs. This evaluation explores the experiences and perceptions of community participants in the ES4SE TA program.
In order to assess the regional and subregional geologic framework of the MRCI area and expand carbon dioxide (CO2) storage characterization efforts in this larger region, the current state of geologic knowledge relative to carbon storage (CS) has been summarized by compiling available geologic data and interpretive results into a centralized resource under Subtask 2.1. The MRCI region is a large area, which includes (1) part of the Forest City Basin and Western Arches, (2) Illinois Basin, (3) Upper Mississippi Embayment, (4) Michigan Basin, (5) Central Arches, (6) Appalachian Basin, and (7) Atlantic Coastal Plain and West Atlantic basins. Basins and arches are subdivided into areas of similar geology based on geologic structures and state-specific stratigraphic nomenclature. A concerted effort was made to present the current understanding of rock-unit stratigraphy in the subsurface of each basin and arch region (and subdivisions therein). Rock units are characterized based on their relative CS potential (saline reservoirs, confining intervals, etc.) within CS systems. CS systems are defined by regional confining units (usually thick, widespread shales), and contain all reservoirs and strata between the regional confining units. Report Authors – Steve Greb and Tom Sparks (Kentucky Geological Survey), Mark Kelley, Sanjay Mawalkar, John Hershberger, Priya Ravi Ganesh, Derrick James, and Stuart Skopec (Battelle), Charles Bopp, Yaghoob Lasemi and Hannes Leetaru (deceased) (Illinois State Geological Survey), Kristin Carter (Pennsylvania Geological Survey), William Harrison (Michigan Geological Repository for Research and Education – Michigan Geological Survey), Susan Pool (West Virginia Geological and Economic Survey), James McDonald (Ohio Geological Survey), John Schmelz (Rutgers University), Ryan Clark (Iowa Geological Survey). Other Technical Contributors – Seth Carpenter and John Hickman (Kentucky Geological Survey), Jessica Moore, Eric Lewis, Philip Dinterman, Timothy Vance, and Gary Daft (West Virginia Geological and Economic Survey), Michele Cooney, Robin Anthony, Cheyenne Woodward, and Katherine Schmid (Pennsylvania Geological Survey), Autumn Haagsma and Amber Conner (Michigan Geological Repository for Research and Education – Michigan Geological Survey), Kenneth Miller (Rutgers University), Ashley Douds and Valerie Beckham-Feller (Indiana Geological & Water Survey), Michael Solis (Ohio Geological Survey).
The objective of the Midwest Regional Carbon Initiative (MRCI) project is to implement a collaborative Regional Initiative (RI) to accelerate the deployment of carbon capture, and storage (CCS) in the Midwest-Northeastern quadrant of the United States. This report is a Technical Summary report describing work performed on Tasks 2.4 (Conducting Regional/Subregional Analysis) and 2.5 (Assessing and Managing Risk) during the MRCI project. In Task 2.4, detailed numerical reservoir simulation models were developed for selected carbon storage (CS) systems identified under Task 2.1 (Battelle, 2021a) in the MRCI study area. The objective of Task 2.4 is to demonstrate a dynamic modeling methodology for evaluating the suitability of the (selected) CS systems in the MRCI region for hosting a commercial-scale storage project. In this study, CO2 injectivity was evaluated for different CS systems with an annual injection rate of 1 million metric tonnes (MMT) of CO2 considered as the minimum requirement for a commercial scale project. The objective of Task 2.5 is to assess key risks associated with storing CO2 in the different CS systems across the MRCI region and to demonstrate a method(s) for assessing these risks that may be used by developers of future CO2 storage projects in the region. The risk analysis was limited to evaluating two types of leakage risks (i.e., wellbore leakage, flow across unfractured caprock) at three modeled sites considered in Task 2.4.
This Final Technical Report describes the successful completion of all project tasks under award DE-EE0008272, plus three additional deliverables, all completed within the original budget. Our objective was to position CHP as a key driver of American competitiveness, the strategic use of domestic energy resources, and enhanced energy resilience. This vision was pursued through sustained collaboration with a broad range of public and private stakeholders, including manufacturers, commercial and institutional facilities, state and federal agencies, and associations of end-users, among others.