Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Bridging particle and reactor scales in the simulation of biomass fast pyrolysis by coupling particle resolved simulation and coarse grained CFD-DEM

Efficient utilization of biomass is challenging due to the complexity of the feedstock at molecular, particle, and reactor scales. Direct coupling of particle scale model and reactor scale simulation is computationally infeasible. In this work, the results from a particle resolved simulation were used to calibrate the heat transfer and reaction kinetics of particles. A hybrid drag model was used to consider the different fluidization properties of sands and biomass particles. The computation cost was reduced using a coarse-grained Discrete Element Method (DEM). The simulated conversion rate, char yield, tar yield, and pyrolysis gas yield compare well with experiment. The residence time and axial distributions of biomass were also analyzed. This novel multi-scale method provides an efficient and accurate tool for the modeling of biomass pyrolysis reactors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Autoignition of trans -decalin, a diesel surrogate compound: Rapid compression machine experiments and chemical kinetic modeling

Decahydronaphthalene (decalin), with both cis and trans isomers, is a bicyclic alkane that is found in aviation fuels, diesel fuels, and alternative fuels from tar sands and oil shales. Between the two decalin isomers, trans-decalin has a lower cetane number, is energetically more stable, and has a lower boiling point. Moreover, trans-decalin has often been chosen as a surrogate component to represent two-ring naphthenes in transportation fuels. Recognizing the importance of understanding the chemical kinetics of trans-decalin in the development of surrogate models, an experimental and modeling study has been conducted. Experimentally, the autoignition characteristics of trans-decalin were investigated using a rapid compression machine (RCM) by using trans-decalin/O2/N2 mixtures at compressed pressures of PC=10–25 bar, low-to-intermediate compressed temperatures of TC=620–895 K, and varying equivalence ratios of Φ=0.5, 1.0, and 2.0. These new experimental data demonstrate the effects of pressure, fuel loading, and oxygen concentration on autoignition of trans-decalin. The current RCM data of trans-decalin at lower temperatures were also found to complement well with the literature shock tube data of decalin (mixture of cis+trans) at higher temperatures. Furthermore, a chemical kinetic model for the oxidation of trans-decalin has been developed with new reaction rates and pathways, including, for the first time, a fully-detailed representation of low-temperature chemical kinetics for transdecalin. This model shows good agreement with the overall ignition delay results of the current RCM experiments and the literature shock tube studies. Chemical kinetic analyses of the developed model were further conducted to help identify the fuel decomposition pathways and the reactions controlling the autoignition at varying conditions.

10 SYNTHETIC FUELS↗

The effect of wood composition and supercritical CO 2 extraction on charcoal production in ferroalloy industries

This work demonstrates that the integration of supercritical carbon dioxide extraction with slow pyrolysis is an effective method for the production of value-added chemicals and charcoal that is an attractive alternative to coke for industry. Integration of technologies is key for the development of holistic biorefineries that exploit all parts of the biomass feedstock and generate little or ideally no waste. In fact, the use of waste or low valued wood fractions is attractive due to their plentiful abundance and lack of exploitation. Supercritical carbon dioxide has been demonstrated to be effective at the removal of over half of extractives from low quality wood and forestry wastes, which can account for up to 11 wt %, of the dried biomass in waste needles. High extractive yields by supercritical carbon dioxide extraction illustrates the potential of utilizing low quality wood as an alternative feedstock for the sustainable production of value-added chemicals. We report high yields of steroids and derivatives, terpenes and other plant metabolites were obtained in the extracts of needles, branches and bark. Importantly, supercritical carbon dioxide extraction had little impact neither on the physical properties of original wood nor on the yield of solid charcoal. This indicates that extraction by supercritical carbon dioxide can be used as a method for adding further value to the process by removal of bio-based chemicals, whilst still maintaining the yield of the solid fuel product. Moreover, the heat treatment temperature and supercritical carbon dioxide extraction had a significant impact on the tar yields during pyrolysis, leading to an increase in naphthalene, polycyclic aromatic hydrocarbons, aromatic and phenolic fractions with greater temperature. These results are promising as they show that the charcoal obtained from this renewable feedstock could be used as an alternative to fossil-based coke in applications including ferroalloy industries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogenolysis Versus Hydrocracking for Polyolefin Upcycling

Global plastic production has reached 413.8 million metric tons in 2024 and is forecasted to surpass 1.2 billion metric tons by 2050. Polyolefins, mainly polyethylene (PE) and polypropylene (PP), dominate single-use packaging and account for approximately 55% of global plastic waste. The chemical inertness that makes these materials desirable for commercial applications also renders them persistent in the environment. Current recycling technologies have proven to be insufficient to divert plastic waste from landfills or environmental loss due to technical limitations and poor economic incentives. Conventional mechanical recycling is a form of downcycling, in which the polymer remelting process results in products with inferior material properties and reduced market value. Pyrolysis, a thermochemical route used for the chemical recycling of plastic wastes into refinery feedstock, requires severe conditions, typically 400–600 °C in an oxygen-free environment. The high temperature drives up energy costs and produces a wide range of poorly defined products, including undesirable light gases and heavy tars that pose challenges for downstream processing. As an alternative, catalytic chemical recycling offers a promising route for converting waste polyolefins back into value-added hydrocarbons—such as fuels, lubricant base oils, and other chemical feedstocks—at temperatures typically below 300 °C. This opinion article focuses on two dominant pathways in heterogeneous catalysis that are used to cleave the C–C bonds of polyolefins: hydrogenolysis and hydrocracking. Both catalytic pathways have the potential to selectively convert polyolefin waste into valuable fuels and chemical feedstocks under mild conditions. Notably, while hydrocracking primarily yields branched hydrocarbon products, hydrogenolysis predominantly produces linear hydrocarbons. Here, we compare the mechanisms and catalyst designs for hydrocracking and hydrogenolysis, analyze critical technical challenges from catalyst stability to process engineering, and provide an outlook on how these complementary pathways can be used to repurpose plastic waste into valuable products.

Zhang, Ruoxi [Iowa State Univ., Ames, IA (United S↗

Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar

The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.

09 BIOMASS FUELS↗

Pyrolysis of high-density polyethylene: Degradation behaviors, kinetics, and product characteristics

Pyrolysis is a promising technology for converting plastic waste into valuable raw materials while offering a potential solution to the global plastic pollution crisis. In this study, the thermal pyrolysis of high-density polyethylene (HDPE) is investigated in a drop tube reactor under nearly isothermal conditions. The impact of reaction temperature and gas/volatile residence time on carbon conversion and product distribution is examined across a range of 500–900°C and 3.6–32.2s, respectively. Non-condensable gas products detected by online mass spectrometry are H 2 , CH 4 , C 2 H 4 , C 2 H 6 , C 3 H 6 , and C 3 H 8 . At elevated temperatures and prolonged residence time, H 2 yield reaches as high as 8.6 wt% of the initial HDPE mass due to intensified cracking reactions of C 2 –C 3 hydrocarbons and long-chain aliphatic compounds. Consequently, pyrolysis tars consist mainly of polycyclic aromatic hydrocarbons (PAHs) with 5–7 rings, accompanied by visible coke deposition within the reactor. HDPE decomposition to volatiles is an endothermic process and it is complete at a temperature between 492°C and 525°C, depending on the heating rate employed, from non-isothermal thermogravimetric analysis and differential scanning calorimetry (TGA-DSC) measurements. The thermal degradation of HDPE pellets follows the two-dimensional nucleation growth model for conversion levels up to 0.8 with an apparent activation energy of 259–270 kJ/mol and a pre-exponential factor of 4.83 × 10 17 –1.37 × 10 19 min -1 , determined from various isoconversional methods such as Flynn-Wall-Ozawa (FWO), Kissinger-Akahira-Sunose (KAS), and Starink, along with Criado's master plots. Further, these findings provide valuable insights into optimizing process parameters and refining reactor design for pyrolysis, which can be integrated with gasification and reforming processes to enhance hydrogen production on a larger scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of Sn{sup 4+} and Sn{sup 4+}/Mg{sup 2+} doping on structural features and visible absorption properties of {alpha}-Fe{sub 2}O{sub 3} hematite

Pure, Sn-doped and Mg/Sn co-doped {alpha}-Fe{sub 2}O{sub 3} hematite samples were synthesized by precipitation process. Fe{sub 2}O{sub 3} is the most popular red mineral pigment which is used largely in traditional ceramics, tar and concrete. The compounds were characterized by powder X-ray diffraction (XRD), scanning transmission electronic microscopy (energy dispersive X-ray cartography), Moessbauer spectroscopy, magnetic investigations versus temperature and visible-NIR spectroscopy. Both {sup 57}Fe and {sup 119}Sn Moessbauer analyses combined with rietveld XRD refinements are the ideal techniques to characterize tin-iron oxides. Hence, thanks to these techniques it was shown how the synthesis temperature influences directly the grain size and the dopants concentration limit which can be incorporated into the host hematite matrix. The stabilization of these tetravalent and divalent dopants into the hematite framework leads to reduce the crystal growth and to limit the (AF) ordering due to the formation of cationic vacancies. The study of the Morin magnetic transition emphasizes this demonstration. In a second part, the influence of the dopants incorporation on the material color was investigated in order to show which key parameters allow improving the red color saturation of iron oxides. In order to improve the red color of the hematites, it was shown that the introduction of cationic vacancies-limiting the octahedral distortion thanks to the interruption of the dissymmetric metal-metal orbital coupling-is the key point. Vacancies are created by Sn{sup 4+}, doping for an increase of the introduced Sn{sup 4+} concentration; it acts to the detriment of the color saturation. - Graphical Abstract: Sn-doped or Sn/Mg-doped Fe{sub 2}O{sub 3} hematites, were analyzed by X-ray diffraction refinement, Moessbauer spectroscopy, magnetic characterization and TEM investigations. Their color is correlated to the doping ions concentration.

36 MATERIALS SCIENCE↗

Unveiling dark brown carbon: The hidden light-absorbing aerosols from biomass burning

The global rise in wildfire severity highlights the significant warming impact of brown carbon aerosols. Further, new findings reveal water-insoluble “dark brown carbon” tar balls that absorb far more light than the previously studied water-soluble brown carbon, representing a major unaccounted factor in global Earth System Models.

54 ENVIRONMENTAL SCIENCES↗

Detailed modeling of hydrogen release and particle shrinkage during pyrolysis of inhomogeneous wood

Hydrogen release during pyrolysis of woody biomass is studied considering anisotropicity and inhomogeneity of wood structure. A new anisotropic shrinkage model is proposed based on the decomposition of main wood constituents, i.e., cellulose, hemicellulose, and lignin. The new shrinkage model can predict the temporal evolution of the wood structure, and the differences between axial and radial shrinkage during pyrolysis. The model agrees very well with several experimental data from the literature. Based on particle temperature during conversion, the pyrolysis is partitioned into four stages, and the hydrogen release and H 2 formation from each stage are investigated. Stage (IV) of pyrolysis, from 1000 to 1273 K, is found to be efficient for H 2 production owing to the production of considerable mass of H with a minimal amount of tar species. Furthermore, the char quality is found to be different at the end of stages (II), (III), and (IV), where around 67.7, 80.5, and 93.4% wt. of solid residue is made of carbon, respectively. The model is also used to explain how the heating rate affects the temperature distribution inside the particle and how it shifts the peak of hydrogen release. Finally, the pyrolysis of two inhomogeneous wood samples — a beech twig with bark and a beech dowel with growth rings — are investigated. The bark can affect the pyrolysis rate, products, and flow pattern inside the particle. The growth rings do not have a considerable effect on the pyrolysis rate and products, but they have a significant impact on the flow pattern. This has an important implication for char conversion studies where the internal surface area and porosity field distribution have a significant effect on the gasification and oxidation rates.

09 BIOMASS FUELS↗

Nitrogen evolution, NO X formation and reduction in pressurized oxy coal combustion

Oxy-combustion is one of the most prominent solutions for reducing CO 2 emissions from coal-fired power plants using carbon-capture-and-utilization technology. However, when compared to air combustion at atmospheric pressure, oxy-combustion is very expensive, owing to the significant efficiency penalties associated with air separation, flue gas recirculation (FGR), treatment, compression, and storage or transit of CO 2 . In comparison, pressurized oxy-combustion (POC) is more efficient as it recovers a significant amount of heat energy from the flue gas moistures. Nevertheless, CO 2 derived from pressurized oxy coal combustion has impurities, e.g., acid gases (NO X and SO X ) that can corrode the plant equipment, transport lines as well as deteriorating effect on the environment. Fortunately, in pressurized combustion systems, both NO X and SO X can be scrubbed by a single-column direct contact cooler (DCC), but this requires a minimum ratio of NO X to SO X at the inlet to be efficiently removed. Therefore, NOx is one of the important hindering parameters in commercializing the pressurized oxy-combustion. Although NOx evolution during oxy-coal combustion has been explored extensively at 1 atm, higher pressure studies are rare. Much still needs to be done to better understand the NO X mechanism and the effects of different parameters on NO X emissions under these conditions. Here, this paper reviews the published literature on nitrogen evolution, NO X formation and reduction in pressurized oxy-coal combustion. At higher pressures, the NO X from fuel-bound nitrogen is generated through volatiles, tar and char, all of which are discussed. Where literature is not available, the effect of pressure on NOx evolution in different stages of coal combustion is predicted through CHEMKIN simulation. Homogeneous and heterogeneous pathways of NO X formation and their destruction in pressurized oxy-coal combustion are evaluated. Additionally, the effect of pressure on a few mature and commercialized NOx abatement methods is explored. In the last, the future perspective and recommendation are given. This review will aid in the provision of basic knowledge about NOx evolution and control in pressurized fuel combustion, as well as the identification of new research areas to pursue.

01 COAL, LIGNITE, AND PEAT↗

Thermal valorization of post-consumer film waste in a bubbling bed gasifier

Highlights: • Film waste from packaging is a common waste, a fraction of which is not recyclable. • Gasification can make use of the high energy value of the non-recyclable fraction. • This waste and two reference polymers were gasified in a bubbling bed reactor. • This experimental research proves technical feasibility of the process. • It also analyzes impact of composition and ER on the performance of the plant. - Abstract: The use of plastic bags and film packaging is very frequent in manifold sectors and film waste is usually present in different sources of municipal and industrial wastes. A significant part of it is not suitable for mechanical recycling but could be safely transformed into a valuable gas by means of thermal valorization. In this research, the gasification of film wastes has been experimentally investigated through experiments in a fluidized bed reactor of two reference polymers, polyethylene and polypropylene, and actual post-consumer film waste. After a complete experimental characterization of the three materials, several gasification experiments have been performed to analyze the influence of the fuel and of equivalence ratio on gas production and composition, on tar generation and on efficiency. The experiments prove that film waste and analogue polymer derived wastes can be successfully gasified in a fluidized bed reactor, yielding a gas with a higher heating value in a range from 3.6 to 5.6 MJ/m{sup 3} and cold gas efficiencies up to 60%.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

ALS/FTLD-linked TDP-43 regulates neurite morphology and cell survival in differentiated neurons

Tar-DNA binding protein of 43 kDa (TDP-43) has been characterized as a major component of protein aggregates in brains with neurodegenerative diseases such as frontotemporal lobar degeneration (FTLD) and amyotrophic lateral sclerosis (ALS). However, physiological roles of TDP-43 and early cellular pathogenic effects caused by disease associated mutations in differentiated neurons are still largely unknown. Here, we investigated the physiological roles of TDP-43 and the effects of missense mutations associated with diseases in differentiated cortical neurons. The reduction of TDP-43 by siRNA increased abnormal neurites and decreased cell viability. ALS/FTLD-associated missense mutant proteins (A315T, Q331K, and M337V) were partially mislocalized to the cytosol and neurites when compared to wild-type and showed abnormal neurites similar to those observed in cases of loss of TDP-43. Interestingly, cytosolic expression of wild-type TDP-43 with mutated nuclear localization signals also induced abnormal neurtie morphology and reduction of cell viability. However, there was no significant difference in the effects of cytosolic expression in neuronal morphology and cell toxicity between wild-type and missense mutant proteins. Thus, our results suggest that mislocalization of missense mutant TDP-43 may contribute to loss of TDP-43 function and affect neuronal morphology, probably via dominant negative action before severe neurodegeneration in differentiated cortical neurons. Highlights: • The function of nuclear TDP-43 in neurite morphology in mature neurons. • Partial mislocalization of TDP-43 missense mutants into cytosol from nucleus. • Abnormal neurite morphology caused by missense mutants of TDP-43. • The effect of cytosolic expression of TDP-43 in neurite morphology and in cell survival.

60 APPLIED LIFE SCIENCES↗

Biomass Demineralization: A Critical Need for Future Biorefineries

Biomass contains up to 14 essential elements that serve as nutrients for plant growth and development, including photosynthesis and enzyme functionalities. These elements in different chemical forms (e.g., minerals) constitute the inorganic fraction of biomass and can cause operational issues in thermal and biochemical biomass conversion technologies. In biomass gasification and pyrolysis processes, for instance, inorganics can cause fouling, tar formation, and corrosion. In catalytic and biochemical processes, inorganics can poison catalysts, alter biochemical pathways, and modify product yields and selectivity. This review provides an overview of the inorganic content in biomass feedstocks, the critical role inorganics play in plant biochemistry, the effect that inorganics have in various thermochemical and biochemical biomass conversion technologies, and different approaches to remove them from biomass. We provide recommendations for future research, focusing on developing technologies to effectively remove inorganics from biomass, using the inorganics to improve soil quality and for alternative applications, and designing biorefineries to convert demineralized biomass obtained from diverse sources.

09 - BIOMASS FUELS↗

Bed Agglomeration During the Steam Gasification of a High Lignin Corn Stover Simultaneous Saccharification and Fermentation (SSF) Digester Residue

This research investigates the bed agglomeration phenomena during the steam gasification of a high lignin residue produced from the simultaneous saccharification and fermentation (SSF) of corn stover in a bubbling fluidized bed. The studies were conducted at 895°C using alumina as bed material. Biomass was fed at 1.5 kg/hr, while steam was fed to give a velocity equal to 2.5 times the minimum fluidization velocity, with a steam/carbon ratio of 0.9. The pelletized feedstock was co-fed with a cooling nitrogen stream to mitigate feed line plugging issues. Tar production was high at 50.3 g/Nm3, and the fraction of C10+ compounds was greater than that seen in the gasification of traditional lignocellulosic feedstocks. Carbon closures over 94 % were achieved for all experiments. Bed agglomeration was found to be problematic, indicated by pressure drop increases observed below the bed and upstream of the feed line. Two size categories of solids were recovered from the reactor, +60 mesh and -60 mesh. After a 2.75-hour experiment, 61.7 wt % was recovered as -60 mesh particles and 38.2 wt% of the recovered reactor solids were +60 mesh. A sizeable percentage, 31.8 wt%, was +20 mesh. The -60 mesh particles were mainly formed by the initial bed material (Al2O3). Almost 50 wt. % of the + 20 mesh particles was found to be formed by organics. The unreacted carbon remaining in the reactor resulted in a low conversion rate to product gas. ICP-AES, SEM, SEM-EDS, and XRD confirmed that the large agglomerates (+ 20 mesh) were not encapsulated bed material but rather un-gasified feedstock pellets with sand particles attached to it.

bioenergy↗

Adsorption Characteristics of Coals Pyrolyzed at Slow Heating Rates

Underground coal pyrolysis is a process similar to in situ oil shale production wherein heat is applied to deep coal formations to produce light hydrocarbons. Like enhanced coal bed methane, the injection of CO 2 post thermal treatment can improve hydrocarbon recovery and serves as a means of carbon sequestration. Little information exists pertaining to coals pyrolyzed to temperatures expected with this process. This work examines the development of meso- and micropores and their influence on methane and carbon dioxide adsorption and permeability on a thermally treated Utah bituminous coal. Residual tars were found to affect the pore size distributions in pyrolyzed coals. Generally, with increasing treatment temperature, there are more meso- and micropores. A correlation was established between the prevalence of mesopores in pyrolyzed coals and adsorption and, to a lesser extent, permeability. Finally, the treatment temperature of this particular coal is directly related to the amount of CO 2 said coal can store and how the plume of injected CO 2 moves through the formation.

01 COAL, LIGNITE, AND PEAT↗

Organic Acid-Assisted Thermal Dehalogenation of Halide Salt Nuclear Wastes: From Waste Salts to Borosilicate Glass

Only a handful of high-halide salt waste forms have been demonstrated for vitrification-based immobilization strategies for halide-salt nuclear waste streams (e.g., pyroprocessing wastes, molten salt reactor wastes) and they all have low waste loading potential and most have low chemical durabilities for high-alkali streams. An alternative approach to direct salt immobilization is salt partitioning prior to waste form fabrication and one option for partitioning is halide removal (called dehalogenation). Removing the halogen fraction through dehalogenation can significantly reduce the waste volume required for disposal in the primary waste form. Furthermore, when dehalogenation is performed using organic acids, the dehalogenation reagent can decompose during high-temperature vitrification, reducing waste loading limitations in the waste form. In the current work, different organic acids (i.e., oxalic, formic, acetic, oxamic, and citric) were evaluated for dehalogenation efficiency of a simple chloride salt simulant (7.19% LaCl 3 , 53.77% LiCl, and 39.04% KCl, by mole) and a more complex chloride salt simulant called ERV3 (electrorefiner version 3) at 150 °C–300 °C and using H + /Cl – molar ratios of 1:1, 2:1, and 3:1. Additionally, a borosilicate glass waste form called TARS (or the average of refined specifications) was formulated, produced, and characterized for dehalogenated ERV3.

Amorphous materials↗

Toward Molecule-Specific Geochemistry of Heavy Ends: Application to the Upstream Oil Industry

Detailed molecular analysis of the composition of petroleum is typically performed on only the light (volatile) fraction, using analyses involving gas chromatography (GC). Heavier (nonvolatile) components such as kerogen, bitumen, and asphaltenes, which are relevant to conventional reservoirs and particularly to unconventional gas shale and tight oil formations, are not amenable to analysis by GC and instead are typically studied by more phenomenological techniques. This report describes a suite of analytical techniques that can provide sufficient average molecular information on the heavy ends (defined as the nonvolatile fraction) to be useful for a variety of industrial applications, expanding the discipline of molecule-specific geochemistry into the non-GC amenable fractions of petroleum materials. Heavy ends are composed of the elements C, H, N, S, and O, and the bonding environments of each can be measured by various solid state spectroscopies: nuclear magnetic resonance (NMR) and infrared (IR) spectroscopies for C, H, and O; X-ray absorption near-edge structure (XANES) spectroscopy for S and N. Additionally, advances in mass spectrometry, including techniques such as laser desorption laser ionization mass spectrometry (L2MS), can be used to measure the molecular weight and dominant molecular architecture of asphaltenes. Moreover, higher-order structures can be measured: samples of kerogen with representative pore geometry can be prepared, and those pore systems are analyzed with techniques such as X-ray diffraction and neutron scattering. Colloidal structures of asphaltenes can be measured with a variety of techniques, which reveal a hierarchical aggregation structure. These analyses provide sufficient structural data to enable structure–property and structure–function relationships to be determined, which can be applied to the characterization of conventional and unconventional resources. In gas shale and tight oil formations, which contain abundant inorganic minerals as well as kerogen, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) is used for simultaneous analysis of mineralogy, kerogen content, and maturity, typically performed at the wellsite. In conventional reservoirs, spatial variations in the asphaltene concentration measured by downhole fluid analysis logging tools are being interpreted with a recently developed equation of state to address upstream issues such as reservoir connectivity, tar mat formation, and fault block migration. Furthermore, as more heavy end analyses are developed, further scientific knowledge and industrial applications of heavy end geochemistry are anticipated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Graphitizable Pitch from Microwave Plasma Pyrolysis of Natural Gas

An innovative approach of microwave plasma was utilized to convert natural gas into tar, from which a highly graphitizable pitch was derived using fractional distillation. The natural gas-derived pitch (NGDP) was thoroughly characterized, and the graphitizability of the carbonized NGDP was assessed using polarized light microscopy. The NGDP and, for comparison, needle coke, petroleum coke, and shot coke were subjected to graphitization heat treatment (GR) at 2500 °C. Results indicate that the graphitizability of the NGDP exceeds those of all industrial standard cokes. The GR-NGDP showed the highest degree of graphitization and crystallite size among all samples.

03 NATURAL GAS↗