SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Viewgraphs on the system of experts for intelligent data management (SEIDAM) are presented. Topics covered include: multiple data sources integration; SEIDAM structure; machine learning; user interface; spatial knowledge expert system; digital terrain model (DTM) and segmentation expert systems; system validation; and tasks and plans.
Given a valid system model and adequate observability, a Kalman filter will converge toward the true system state with error statistics given by the estimated error covariance matrix. The errors generally do not continue to decrease. Rather, a balance is reached between the gain of information from new measurements and the loss of information during propagation. The errors can be further reduced, however, by a second pass through the data with an optimal smoother. This algorithm obtains the optimally weighted average of forward and backward propagating Kalman filters. It roughly halves the error covariance by including future as well as past measurements in each estimate. This paper investigates whether such benefits actually accrue in the application of an optimal smoother to spacecraft attitude determination. Tests are performed both with actual spacecraft data from the Extreme Ultraviolet Explorer (EUVE) and with simulated data for which the true state vector and noise statistics are exactly known.
Since the late 1980s, the NASA Microgravity Science Program has implemented a systematic effort to expand microgravity research. In 1992, 114 new investigators were selected to enter the program and more US microgravity experiments were conducted in space than in all the years combined since Skylab (1973-74). The use of NASA Research Announcements (NRA's) to solicit research proposals has proven to be highly successful in building a strong base of high-quality peer-reviewed science in both the ground-based and flight experiment elements of the program. The ground-based part of the program provides facilities for low gravity experiments including drop towers and aircraft for making parabolic flights. Program policy is that investigations should not proceed to the flight phase until all ground-based investigative capabilities have been exhausted. In the space experiments program, the greatest increase in flight opportunities has been achieved through dedicated or primary payload Shuttle missions. These missions will continue to be augmented by both mid-deck and GAS-Can accommodated experiments. A US-Russian cooperative flight program envisioned for 1995-97 will provide opportunities for more microgravity research as well as technology demonstration and systems validation efforts important for preparing for experiment operations on the Space Station.
This presentation describes a project, formal verification of the microcode in the AAMP5 microprocessor, conducted to explore how formal techniques for specification and verification could be introduced into an industrial process. Sponsored by the Systems Validation Branch of NASA Langley and by Collins Commercial Avionics, a division of Rockwell International, it was conducted by Collins and the SRI International Computer Science Laboratory. The project consisted of specifying in the PVS language developed by SRI a portion of a Rockwell proprietary microprocessor, the AAMP5, at both the instruction set and register-transfer levels and using the PVS theorem prover to prove the microcode correct for a representative subset of instructions. While this presentation includes a brief technical overview, its emphasis is on the lessons learned in using PVS for an example of this size and the implications for using formal methods in an industrial setting. The central result of this project was to demonstrate the feasibility of formally specifying a commercial microprocessor and the use of mechanical proofs of correctness to verify microcode. This is particularly significant since the AAMP5 was not designed for formal verification, but to provide a more than three fold performance improvement, by pipelining instruction execution, while remaining object code compatible with the earlier AAMP2. As a consequence, the AAMP5 is one of the most complex microprocessors to which formal methods have been applied. Another key result was the discovery of both actual and seeded errors. Two actual microcode errors were discovered and corrected during development of the formal specification, illustrating the value of simply creating a precise specification. Two seeded errors were systematically uncovered while doing correctness proofs. One of these was an actual error that had been discovered after first fabrication but left in the microcode provided to SRI. The other error was designed to be unlikely to be detected by walkthroughs, testing, or simulation. Several other results emerged during the project, including the ease with which practicing engineers became comfortable with PVS, the need for libraries of general purpose theories, the usefulness of formal specification in revealing errors, the natural fit between formal specification and inspections, the difficulty of selecting the best style of specification for a new problem domain, the high level of assurance provided by proofs of correctness, and the need to engineer proof strategies for reuse.
This paper presents an overview of recent developments in an effort to predict transient aeroelastic rotor response during shipboard engage and disengage sequences. The blade is modeled as an elastic beam undergoing in flap, lag, extension and torsion. The blade equations of motion are formulated using Hamilton's principle and they are spatially discretized using the finite element method. The discretized blade equations of motion are integrated for a specified rotor speed run-up or run-down profile. Blade element theory is used to calculate quasi-steady or unsteady aerodynamic loads in linear and nonlinear regimes. The analysis is capable of simulating both articulated, hingeless, and gimballed rotor systems. Validation of the rotor code is discussed, including correlation with droop stop impact tests and wind tunnel experiments. Predictions of safe engagement and disengagement envelopes, limited by excessive blade tip deflections or hub moments, are presented. Future directions of study are also discussed.
The S2 VLBI system synthesizes wide IF bandwidths by rapidly switching the local oscillator (LO) frequency in a small (1-4) number of baseband converters (BBC's). Data are recorded on video cassettes using an array of 8 VHS transports. Characteristics of the S2 Data Acquisition System (DAS), the S2 Record and Playback Terminals (RT and PT) and the S2 Correlator are summarized. The bandwidth synthesis (BWS) frequency switching sequence used in a series of system validation experiments is presented.
AbTech Corporation used an F-18 HARV (High Alpha Research Vehicle) simulation developed by NASA to create an interactive computer-based prototype of the MQ (Model Quest) SV (System Validator) tool. Dryden Flight Research Center provided support to develop, test, and rapidly reprogram the validation function. AbTech's ModelQuest Enterprises highly automated and outperforms other modeling techniques to quickly discover meaningful relationships, patterns, and trends in databases. Applications include technical and business professionals in finance, marketing, business, banking, retail, healthcare, and aerospace.
NASA's New Millennium Program (NMP), has inaugurated the Space Technology 9 (ST9) mission, an integrated system validation project. This is the latest of a series of in-space technology validation activities that began in 1996 with Deep Space 1. The New Millennium Program identifies the technological capabilities needed for future space science missions and the technology advances that will help provide those capabilities.
The Validation Network (VN) prototype for the Global Precipitation Measurement (GPM) Mission compares data from the Tropical Rainfall Measuring Mission (TRMM) satellite Precipitation Radar (PR) to similar measurements from U.S. and international operational weather radars. This prototype is a major component of the GPM Ground Validation System (GVS). The VN provides a means for the precipitation measurement community to identify and resolve significant discrepancies between the ground radar (GR) observations and similar satellite observations. The VN prototype is based on research results and computer code described by Anagnostou et al. (2001), Bolen and Chandrasekar (2000), and Liao et al. (2001), and has previously been described by Morris, et al. (2007). Morris and Schwaller (2009) describe the PR-GR volume-matching algorithm used to create the VN match-up data set used for the comparisons. This paper describes software tools that have been developed for visualization and statistical analysis of the original and volume matched PR and GR data.
The Validation Network (VN) prototype for the Global Precipitation Measurement (GPM) mission compares data from the Tropical Rainfall Measuring Mission (TRMM) satellite Precipitation Radar (PR) to similar measurements from U.S. and international operational weather radars. This prototype is a major component of the GPM Ground Validation System (GVS). The VN provides a means for the precipitation measurement community to identify and resolve significant discrepancies between the ground radar (GR) observations and similar satellite observations. The VN prototype is based on research results and computer code described by Anagnostou et al. (2001), Bolen and Chandrasekar (2000), and Liao et al. (2001), and has previously been described by Morris, et al. (2007). Morris and Schwaller (2009) describe the PR-GR volume-matching algorithm used to create the VN match-up data set used for the comparisons. This paper describes software tools that have been developed for visualization and statistical analysis of the original and volume matched PR and GR data.
End-to-end integration tests are critical risk reduction efforts for any complex vehicle. Phasing tests are an end-to-end integrated test that validates system directional phasing (polarity) from sensor measurement through software algorithms to end effector response. Phasing tests are typically performed on a fully integrated and assembled flight vehicle where sensors are stimulated by moving the vehicle and the effectors are observed for proper polarity. Orion Multi-Purpose Crew Vehicle (MPCV) Pad Abort 1 (PA-1) Phasing Test was conducted from inertial measurement to Launch Abort System (LAS). Orion Exploration Flight Test 1 (EFT-1) has two end-to-end phasing tests planned. The first test from inertial measurement to Crew Module (CM) reaction control system thrusters uses navigation and flight control system software algorithms to process commands. The second test from inertial measurement to CM S-Band Phased Array Antenna (PAA) uses navigation and communication system software algorithms to process commands. Future Orion flights include Ascent Abort Flight Test 2 (AA-2) and Exploration Mission 1 (EM-1). These flights will include additional or updated sensors, software algorithms and effectors. This paper will explore the implementation of end-to-end phasing tests on a flight vehicle which has many constraints, trade-offs and compromises. Orion PA-1 Phasing Test was conducted at White Sands Missile Range (WSMR) from March 4-6, 2010. This test decreased the risk of mission failure by demonstrating proper flight control system polarity. Demonstration was achieved by stimulating the primary navigation sensor, processing sensor data to commands and viewing propulsion response. PA-1 primary navigation sensor was a Space Integrated Inertial Navigation System (INS) and Global Positioning System (GPS) (SIGI) which has onboard processing, INS (3 accelerometers and 3 rate gyros) and no GPS receiver. SIGI data was processed by GN&C software into thrust magnitude and direction commands. The processing changes through three phases of powered flight: pitchover, downrange and reorientation. The primary inputs to GN&C are attitude position, attitude rates, angle of attack (AOA) and angle of sideslip (AOS). Pitch and yaw attitude and attitude rate responses were verified by using a flight spare SIGI mounted to a 2-axis rate table. AOA and AOS responses were verified by using a data recorded from SIGI movements on a robotic arm located at NASA Johnson Space Center. The data was consolidated and used in an open-loop data input to the SIGI. Propulsion was the Launch Abort System (LAS) Attitude Control Motor (ACM) which consisted of a solid motor with 8 nozzles. Each nozzle has active thrust control by varying throat area with a pintle. LAS ACM pintles are observable through optically transparent nozzle covers. SIGI movements on robot arm, SIGI rate table movements and LAS ACM pintle responses were video recorded as test artifacts for analysis and evaluation. The PA-1 Phasing Test design was determined based on test performance requirements, operational restrictions and EGSE capabilities. This development progressed during different stages. For convenience these development stages are initial, working group, tiger team, Engineering Review Team (ERT) and final.
A prime focus spectrometer (PFS), along with corrective optics, will mount in place of the secondary mirror of the Subaru telescope on Mauna Kea, Hawaii. This will allow simultaneous observations of cosmologic targets. It will enable large-scale galactic archeology and dark energy surveys to help unlock the secrets of the universe. To perform these cosmologic surveys, an array of 2,400 optical fibers needs to be independently positioned within the 498-mm-diameter focal plane of the PFS instrument to collect light from galaxies and stars for spectrographic analyses. To allow for independent re-positioning of the fibers, a very small positioner (7.7 mm in diameter) is required. One hundred percent coverage of the focal plane is also required, so these small actuators need to cover a patrol region of 9.5 mm in diameter. To optimize the amount of light that can be collected, the fibers need to be placed within 5 micrometers of their intended target (either a star or galaxy). The Cobra Fiber Positioner was designed to meet the size and accuracy requirements stated above. Cobra is a two-degrees-of-freedom mechanism that can position an optical fiber in the focal plane of the PFS instrument to a precision of 5 micrometers. It is a theta-phi style positioner containing two rotary piezo tube motors with one offset from the other, which enables the optic fibers to be placed anywhere in a small circular patrol region. The patrol region of the actuator is such that the array of 2,400 positioners allows for full coverage of the instrument focal plane by overlapping the patrol areas. A second-generation Cobra positioner was designed based on lessons learned from the original prototype built in 2009. Improvements were made to the precision of the ceramic motor parts, and hard stops were redesigned to minimize friction and prevent jamming. These changes resulted in reducing the number of move iterations required to position the optical fiber within 5 micrometers of its target. At the time of this reporting, there are still many tests to be performed that will validate system level performance, but on an individual level, the Cobra positioner demonstrates excellent performance and will enable the PFS instrument to make unprecedented measurements of the universe. What is unique about the upgrades made to the Cobra positioner is the improved performance due to the design changes in the hard stops and the ceramic end caps of the motors. Other changes were made to reduce the unit cost of a Cobra positioner without affecting the performance, since thousands of these devices will have to be built for the PFS instrument.
The NASA Fundamental Aeronautics Program Subsonic Fixed Wing Project and Integrated Systems Research Program Environmentally Responsible Aviation Project in the Aeronautics Research Mission Directorate are conducting research on advanced aircraft technology to address the environmental goals of reducing fuel burn, noise and NOx emissions for aircraft in 2020 and beyond. Both Projects, in collaborative partnerships with U.S. Industry, Academia, and other Government Agencies, have made significant progress toward reaching the N+2 (2020) and N+3 (beyond 2025) installed fuel burn goals by fundamental aircraft engine technology development, subscale component experimental investigations, full scale integrated systems validation testing, and development validation of state of the art computation design and analysis codes. Specific areas of propulsion technology research are discussed and progress to date.
Create a motion validation system using Google Glass and Microsoft Kinect to provide instantaneous feedback for integration with NASA tutorials and procedures.
Two full-scale passive Earth Entry Vehicles (EEV) with realistic structure, surrogate sample container, and surrogate Thermal Protection System (TPS) were built at NASA Langley Research Center (LaRC) and tested at the Utah Test and Training Range (UTTR). The main test objective was to demonstrate structural integrity and investigate possible impact response deviations of the realistic vehicle as compared to rigid penetrometer responses. With the exception of the surrogate TPS and minor structural differences in the back shell construction, the two test vehicles were identical in geometry and both utilized the Integrated Composite Stiffener Structure (ICoSS) structural concept in the forward shell. The ICoSS concept is a lightweight and highly adaptable composite concept developed at NASA LaRC specifically for entry vehicle TPS carrier structures. The instrumented test vehicles were released from a helicopter approximately 400 m above ground. The drop height was selected such that at least 98% of the vehicles terminal velocity would be achieved. While drop tests of spherical penetrometers and a low fidelity aerodynamic EEV model were conducted at UTTR in 1998 and 2000, this was the first time a passive EEV with flight-like structure, surrogate TPS, and sample container was tested at UTTR for the purpose of complete structural system validation. Test results showed that at a landing vertical speed of approximately 30 m/s, the test vehicle maintained structural integrity and enough rigidity to penetrate the sandy clay surface thus attenuating the landing load, as measured at the vehicle CG, to less than 600 g. This measured deceleration was found to be in family with rigid penetrometer test data from the 1998 and 2000 test campaigns. Design implications of vehicle structure/soil interaction with respect to sample container and sample survivability are briefly discussed.
Since the early 1990’s, the Tropical Atmosphere Ocean (TAO) mooring array has been instrumental for observing Kelvin and Rossby wave propagation which is key for El Nino/Southern Oscillation (ENSO) prediction. However, recent funding and programmatical issues have highlighted the need to rigorously assess the impact of the TAO observing system on ENSO predictions. Therefore, we evaluate the TAO using data assimilation observation denial experiments (also known as Observing System Evaluation or OSE experiments). This presentation will evaluate the TAO observing impact on both reanalyses and prediction of the big 2015 El Nino. We have completed reanalyses for July 2014-Dec 2015 for both the CONTROL experiment (that assimilates all available data) and the NOTAO experiment (that is identical to the CONTROL but withholds all TAO observations) using the best available NASA GEOS-S2S V3 seasonal prediction system. Validation of these reanalyses shows that TAO assimilation generally improves comparisons of temperature and salinity versus gridded in situ observations. Temperature is universally improved above the thermocline near the equator, but the biggest improvement is found in the eastern Pacific, just below the thermocline, where the variation of the thermocline defines ENSO events. In addition, a surprising result is that even with relatively few observations, salinity is improved throughout the equatorial region except near 120oW near the surface. ENSO forecasts were performed that were initialized from these CONTROL and NOTAO reanalyses. For the 9-month forecasts which were initialized in January, July, and October 2015, the NINO3.4 SST shows that the CONTROL forecasts are warmer and closer to observations than the NOTAO forecasts. We will show that upwelling and shoaling of the mixed layer amplifies the ENSO signal due to TAO assimilation. Prior to (after) April 2015, this upwelling is caused by relatively stronger Rossby (Kelvin) waves in the CONTROL than in the NOTAO experiments.
Future needs of the National Airspace System require decision support tools to adopt a service-oriented architecture in alignment with the FAA’s vision for an Info-Centric NAS. To achieve this, many existing systems will need to undergo a digital transformation from a monolithic decision support tool to a service-oriented architecture where individual services are exposed through well defined Application Programming Interfaces (APIs). To enable this transformation, NASA has developed the Digital Information Platform as a cloud based foundation for development of aviation services with a special focus towards Artificial Intelligence and Machine Learning (ML) services. This paper describes the work required for the transformation of NASA’s legacy surface management system to a real-time ML based decision support system deployed in the cloud. Details of the Machine Learning Operations (MLOps) infrastructure and best practices are described which enabled the end-toend lifecycle management of ML within an integrated software system. Validation results are provided from an operational field evaluation where performance was benchmarked against the legacy approach.
In November 2021, the Federal Aviation Administration published the United States Aviation Climate Action Plan to accelerate innovation across the U.S. aviation ecosystem. In response, NASA has established the Sustainable Flight National Partnership to engage with industry, academia, and other agencies to accomplish net-zero carbon emissions by 2050. As part of the SFNP Mission, NASA is conducting a series of real world operational demonstrations in the current National Airspace System with a focus on delivering real world sustainability benefits. This paper presents the current work and future plan for the SFNP Ops Demo Series and describes the cloud based infrastructure used for virtual deployment of decision support tools to flight operators and Air Traffic Controllers to help improve operational efficiency of the National Airspace System. Validation results are shared along with the key sustainability benefits such as jet fuel savings and reduction in CO2 emissions. The operational efficiency metrics such as delay savings are also reported.