Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switching topology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Power electronics for low power arcjets

In anticipation of the needs of future light-weight, low-power spacecraft, arcjet power electronics in the 100 to 400 W operating range were developed. Limited spacecraft power and thermal control capacity of these small spacecraft emphasized the need for high efficiency. Power topologies similar to those in the higher 2 kW and 5 to 30 kW power range were implemented, including a four transistor bridge switching circuit, current mode pulse-width modulated control, and an output current averaging inductor with an integral pulse generation winding. Reduction of switching transients was accomplished using a low inductance power distribution network, and no passive snubber circuits were necessary for power switch protection. Phase shift control of the power bridge was accomplished using an improved pulse width modulation to phase shift converter circuit. These features, along with conservative magnetics designs allowed power conversion efficiencies of greater than 92.5 percent to be achieved into resistive loads over the entire operating range of the converter. Electromagnetic compatibility requirements were not considered in this work, and control power for the converter was derived from AC mains. Addition of input filters and control power converters would result in an efficiency of on the order of 90 percent for a flight unit. Due to the developmental nature of arcjet systems at this power level, the exact nature of the thruster/power processor interface was not quantified. Output regulation and current ripple requirements of 1 and 20 percent respectively, as well as starting techniques, were derived from the characteristics of the 2 kW system but an open circuit voltage in excess of 175 V was specified. Arcjet integration tests were performed, resulting in successful starts and stable arcjet operation at power levels as low as 240 W with simulated hydrazine propellants.

Hamley, John A.↗
DOE OSTI2025

Optical control of orbital magnetism in magic angle twisted bilayer graphene

Flat bands in graphene-based moiré structures host a wide range of emerging strongly correlated and topological phenomena. Optically probing and controlling them can reveal important information such as symmetry and dynamics, but have so far been challenging due to the small energy gap compared to optical wavelengths. Here, we report near infrared optical control of orbital magnetism and associated anomalous Hall effects (AHE) in a magic angle twisted bilayer graphene (MATBG) on monolayer WSe$_2$ device. We show that the properties of the AHE, such as hysteresis and amplitude, can be controlled by light near integer moiré fillings, where spontaneous ferromagnetism exists. By modulating the light helicity, we observe periodic modulation of the transverse resistance in a wide range of fillings, indicating light induced orbital magnetization through a large inverse Faraday effect. At the transition between metallic and AHE regimes, we also reveal large and random switching of the Hall resistivity, which are attributed to optical control of percolating cluster of magnetic domains. Our results open the door to optical manipulation of correlation and topology in MATBG and related structures.

FOS: Physical sciences↗
DOE OSTI2022

A Tri-Port Current-Source Soft-Switching Medium-Voltage String Inverter for Large-Scale Solar-Plus-Storage Farms

This article presents a tri-port current-source soft-switching medium-voltage string inverter (TMVSI) to reduce the Levelized cost of energy (LCOE) of large-scale solar-plus-storage (SPS) farms. Throughout this work, the topology, operating principle, circuit simulation, control, and hardware design of the TMVSI are introduced. In addition, three key challenges compromising the performance of the TMVSI are addressed in this article. First, a new feed-forward compensation for model predictive control of the TMVSI is proposed to compensate for sampling and computational delay and high dc-link ripple with low computational cost and high scalability. Second, the use of laminated permanent magnets is proposed to reduce the losses of the MV medium-frequency transformer (MFT) in the TMVSI while increasing its saturation current. Finally, an improved U-shape winding pattern is proposed to decrease the leakage inductance of the MV MFT and reduce the voltage stress across semiconductor switches without adding cost or complexity. Here, the effectiveness of the TMVSI is validated by experiments at up to 20kW/500V in different test cases with custom-built prototypes. The contributions of this work make the TMVSI a viable solution to SPS farms and unleash its potential for LCOE reduction.

14 SOLAR ENERGY↗
DOE OSTI2023

Strain-tunable Berry curvature in quasi-two-dimensional chromium telluride

Magnetic transition metal chalcogenides form an emerging platform for exploring spin-orbit driven Berry phase phenomena owing to the nontrivial interplay between topology and magnetism. Here we show that the anomalous Hall effect in pristine Cr 2 Te 3 thin films manifests a unique temperature-dependent sign reversal at nonzero magnetization, resulting from the momentum-space Berry curvature as established by first-principles simulations. The sign change is strain tunable, enabled by the sharp and well-defined substrate/film interface in the quasi-two-dimensional Cr 2 Te 3 epitaxial films, revealed by scanning transmission electron microscopy and depth-sensitive polarized neutron reflectometry. This Berry phase effect further introduces hump-shaped Hall peaks in pristine Cr 2 Te 3 near the coercive field during the magnetization switching process, owing to the presence of strain-modulated magnetic layers/domains. The versatile interface tunability of Berry curvature in Cr 2 Te 3 thin films offers new opportunities for topological electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Anomalous Thermal Hall Effect in an Insulating van der Waals Magnet

Two-dimensional (2D) van der Waals (vdW) magnets have been a fertile playground for the discovery and exploration of physical phenomena and new physics. In this Letter, we report the observation of an anomalous thermal Hall effect (THE) with κ xy ~ 1 × 10 -2 WK -1 m -1 in an insulating van der Waals ferromagnet VI 3 . The thermal Hall signal persists in the absence of an external magnetic field and flips sign upon the switching of the magnetization. In combination with theoretical calculations, we show that VI 3 exhibits a dual nature of the THE, i.e., dominated by topological magnons hosted by the ferromagnetic honeycomb lattice at higher temperatures and by phonons induced by the magnon-phonon coupling at lower temperatures. Our results not only position VI 3 as the first ferromagnetic system to investigate both anomalous magnon and phonon THEs, but also render it as a potential platform for spintronics-magnonics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Automatic Extraction of Network Configurations for Realistic Simulation and Validation

Popular HPC network interconnection simulators such as SST Macro provide a variety of configurable parameters to explore the design space of hardware components such as network links and switches. While such knobs provide flexibility to explore design trade-offs for novel hardware, manually configuring simulations for existing hardware to focus on topology exploration can be cumbersome and error-prone, leading to widely inaccurate simulations. This challenge is compounded when specifications of various (proprietary) technologies are not readily available or are intentionally omitted. In this work, we provide a methodology to automatically tune the simulation configuration of the multiple network models running within SST Macro using Bayesian optimization. We perform this optimization in the context of multiple messaging regimes (i.e., small to large and latency to bandwidth-bound messages) and provide a detailed analysis of the simulation error for four systems. With our automated framework, we achieve a 5x improvement in accuracy over best-effort configurations based on available hardware specifications.

Suetterlein, Joshua D.↗
DOE OSTI2026

Optical control of orbital magnetism in magic-angle twisted bilayer graphene

Flat bands in twisted graphene structures host various strongly correlated and topological phenomena. Optically probing and controlling them can reveal important information such as symmetry and dynamics, but this has been challenging due to the small energy gap compared with optical wavelengths. Here, in this study, we report on the near-infrared optical control of orbital magnetism and associated anomalous Hall effects in a magic-angle twisted bilayer graphene on a monolayer WSe 2 device. We demonstrate control over the hysteresis and amplitude of the anomalous Hall effect near integer moiré fillings using circularly polarized light. By modulating the light helicity, we observe periodic modulation of the transverse resistance in a wide range of fillings, indicating light-induced orbital magnetization through a large inverse Faraday effect. At the transition between metallic and anomalous Hall effect regimes, we also reveal large and random switching of the Hall resistivity, which we attribute to the light-tuned percolating cluster of magnetic domains. Our results demonstrate the potential of the optical manipulation of correlation and topology in moiré structures.

Persky, Eylon [Stanford Univ., CA (United States);↗
NASA NTRS2016

Long-Term Reliability of a Hard-Switched Boost Power Processing Unit Utilizing SiC Power MOSFETs

Silicon carbide (SiC) power devices have demonstrated many performance advantages over their silicon (Si) counterparts. As the inherent material limitations of Si devices are being swiftly realized, wide-band-gap (WBG) materials such as SiC have become increasingly attractive for high power applications. In particular, SiC power metal oxide semiconductor field effect transistors' (MOSFETs) high breakdown field tolerance, superior thermal conductivity and low-resistivity drift regions make these devices an excellent candidate for power dense, low loss, high frequency switching applications in extreme environment conditions. In this paper, a novel power processing unit (PPU) architecture is proposed utilizing commercially available 4H-SiC power MOSFETs from CREE Inc. A multiphase straight boost converter topology is implemented to supply up to 10 kilowatts full-scale. High Temperature Gate Bias (HTGB) and High Temperature Reverse Bias (HTRB) characterization is performed to evaluate the long-term reliability of both the gate oxide and the body diode of the SiC components. Finally, susceptibility of the CREE SiC MOSFETs to damaging effects from heavy-ion radiation representative of the on-orbit galactic cosmic ray environment are explored. The results provide the baseline performance metrics of operation as well as demonstrate the feasibility of a hard-switched PPU in harsh environments.

Ikpe, Stanley A.↗
NASA NTRS1991

Power electronics for low power arcjets

In anticipation of the needs of future light-weight low-power spacecraft, arcjet power electronics in the 100- to 400-W operating range were developed. Power topologies similar to those in the higher 2-kW and 5- to 30-kW power range were implemented, including a four-transistor bridge-switching circuit, current-mode pulse-width modulated control, and an output current averaging inductor with an integral pulse generation winding. Reduction of switching transients was accomplished using a low inductance power distribution network, and no passive snubber circuits were necessary for power switch protection. Phase shift control of the power bridge was accomplished using an improved pulse width modulation to phase shift converter circuit. These features, along with conservative magnetics designs, allowed power conversion efficiencies of greater than 92.5 percent to be achieved into resistive loads over the entire operating range of the converter.

Hamley, John A.↗
DOE OSTI2022

Multilevel Switched-Capacitor AC–DC Step-Down Rectifier for Wireless Charging With Reduced Conduction Loss and Harmonic Content

In this paper, a wireless charging architecture employing a multilevel switched-capacitor (MSC) AC-DC rectifier is investigated. The proposed MSC rectifier features a multilevel design which is scalable to accommodate different power ratings and load ranges. The topology showcases advantages for wireless power transfer (WPT) systems in terms of compactness, efficiency, impedance tunability, and harmonic attenuation. The single-stage active topology is capable of varying its low-distortion staircase input voltage to tune the wireless power transfer system for high system-wide efficiency. A 7-level, 20 W prototype is used to verify the WPT loading and loss analysis. The prototype operates at 150 kHz with up to 3:1 step-down conversion ratio to an output voltage of 5.0 V. The experimental peak DC-to-DC efficiency is 93.8% and the rectifier peak efficiency is 98.3%. As a result. the rectifier demonstrates low waveform distortion and high efficiency across many WPT loading conditions, solidifying its place as a strong candidate for wireless power applications.

42 ENGINEERING↗
NASA NTRS1994

Regular Topologies for Gigabit Wide-Area Networks

In general terms, this project aimed at the analysis and design of techniques for very high-speed networking. The formal objectives of the project were to: (1) Identify switch and network technologies for wide-area networks that interconnect a large number of users and can provide individual data paths at gigabit/s rates; (2) Quantitatively evaluate and compare existing and proposed architectures and protocols, identify their strength and growth potentials, and ascertain the compatibility of competing technologies; and (3) Propose new approaches to existing architectures and protocols, and identify opportunities for research to overcome deficiencies and enhance performance. The project was organized into two parts: 1. The design, analysis, and specification of techniques and protocols for very-high-speed network environments. In this part, SRI has focused on several key high-speed networking areas, including Forward Error Control (FEC) for high-speed networks in which data distortion is the result of packet loss, and the distribution of broadband, real-time traffic in multiple user sessions. 2. Congestion Avoidance Testbed Experiment (CATE). This part of the project was done within the framework of the DARTnet experimental T1 national network. The aim of the work was to advance the state of the art in benchmarking DARTnet's performance and traffic control by developing support tools for network experimentation, by designing benchmarks that allow various algorithms to be meaningfully compared, and by investigating new queueing techniques that better satisfy the needs of best-effort and reserved-resource traffic. This document is the final technical report describing the results obtained by SRI under this project. The report consists of three volumes: Volume 1 contains a technical description of the network techniques developed by SRI in the areas of FEC and multicast of real-time traffic. Volume 2 describes the work performed under CATE. Volume 3 contains the source code of all software developed under CATE.

Shacham, Nachum↗
DOE OSTI2025

Reversible Modification of Rashba States in Topological Insulators at Room Temperature by Edge Functionalization

Quantum materials with novel spin textures from strong spin-orbit coupling (SOC) are essential components for a wide array of proposed spintronic devices. Topological insulators have a necessary strong SOC that imposes a unique spin texture on topological states and Rashba states that arise on the boundary, but there is no established methodology to control the spin texture reversibly. Here, it is demonstrated that functionalizing Bi 2 Se 3 films by altering the step-edge termination directly changes the strength of SOC and thereby modifies the Rashba strength of 1D edge states. Scanning tunneling microscopy/spectroscopy shows that these Rashba edge states arise and subsequently vanish through the Se functionalization and reduction process of the step edges. The observations are corroborated by density functional theory calculations, which show that a subtle chemical change of edge termination fundamentally alters the underlying electronic structure. Importantly, fully reversible and repeatable switching of Rashba edge states across multiple cycles at room temperature is experimentally demonstrated. The results imply Se functionalization as a practical method to control SOC and spin texture of quantum states in topological insulators.

Rashba edge states↗
DOE OSTI2026

Optical control of integer and fractional Chern insulators

Optical control of topology, particularly in the presence of electron correlations, is an interesting topic with broad scientific and technological impact. Twisted MoTe 2 bilayer (tMoTe 2 ) is a zero-field fractional Chern insulator (FCI), exhibiting the fractionally quantized anomalous Hall effect. As the chirality of the edge states and sign of the Chern number are determined by the underlying ferromagnetic polarization, manipulation of ferromagnetism would realize control of the Chern insulator (CI)/FCI states. Here, in this work, we demonstrate control of ferromagnetic polarization, and thus the CI and FCI states, by circularly polarized optical pumping in tMoTe 2 . At low excitation power, we achieve on-demand preparation of ferromagnetic polarization by optical training, that is, electrically tuning the system from non-ferromagnetic to desirable ferromagnetic states under helicity-selective optical pumping. With increased excitation power, we further realize direct optical switching of ferromagnetic polarization at a temperature far below the Curie temperature. Both optical training and direct switching are most effective near CI and FCI states, which we attribute to a gap-enhanced valley polarization of optically pumped holes. The magnetization can be dynamically switched by modulating the helicity of optical excitation. Spatially resolved measurements further demonstrate optical writing of ferromagnetic, and thus CI (or FCI) domains. Our work realizes precise optical control of a topological quantum many-body system with potential applications in topological spintronics, quantum memories and creation of exotic edge states by programmable patterning of integer and fractionally quantized anomalous Hall domains.

ferromagnetism↗
DOE OSTI2022

Out-of-plane polarization and topological magnetic vortices in multiferroic CrPSe 3

Two-dimensional multiferroic materials are ideal systems for exploring new coupling mechanisms between different ferroic orders and producing novel quantum phenomena with potential applications. Here we employ first-principles density functional theory calculations to discover intrinsic ferroelectric and antiferroelectric phases of Cr⁢P⁢Se 3 , which show ferromagnetic order and compete with the centrosymmetric phase with an antiferromagnetic order. Our analysis shows that the electrical dipoles of such type-I multiferroic phases come from the out-of-plane displacements of phosphorus ions due to the stereochemically active lone pairs. The coupling between polar and magnetic orders creates the opportunity for tuning the magnetic ground state by switching from the centrosymmetric to the ferroelectric phase using an out-of-plane electric field. In ferroelectric and antiferroelectric phases, the combination of easy-plane anisotropy and Dzyaloshinskii-Moriya interactions indicates that they can host topological magnetic vortices such as meron pairs.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Reversible long-range domain wall motion in an improper ferroelectric

Reversible ferroelectric domain wall movements beyond the 10 nm range associated with Rayleigh behavior are usually restricted to specific defect-engineered systems. Here, we demonstrate that such long-range movements naturally occur in the improper ferroelectric ErMnO 3 during electric-field-cycling. We study the electric-field-driven motion of domain walls, showing that they readily return to their initial position after having traveled distances exceeding 250 nm. By applying switching spectroscopy band-excitation piezoresponse force microscopy, we track the domain wall movement with nanometric spatial precision and analyze the local switching behavior. Phase field simulations show that the reversible long-range motion is intrinsic to the hexagonal manganites, linking it to their improper ferroelectricity and topologically protected structural vortex lines, which serve as anchor point for the ferroelectric domain walls. Our results give new insight into the local dynamics of domain walls in improper ferroelectrics and demonstrate the possibility to reversibly displace domain walls over much larger distances than commonly expected for ferroelectric systems in their pristine state, ensuring predictable device behavior for applications such as tunable capacitors or sensors.

Zahn, Manuel [Norwegian Univ. of Science and Techn↗
NASA NTRS1979

Telecommunications network optimization

Analysis discusses STACOM (state criminal justic communication) network topology program used to design and evaluate digital telecommunications networks STACOM employs ESAU-WILLIAMS technique to search for direct links between system terminations and regional switching center. Inputs include traffic data, terminal locations, and functional requirements.

Lee, J.↗
NASA NTRS1990

Optimized testing of meshes

Efficient testing techniques for two-dimensional mesh interconnection networks are presented. The tests cover faults in the arbitration logic of the switches; this includes an examination of fault detection in the data paths, routing, and control circuitry, including the conflict resolution capabilities of mesh interconnection networks using topological test methods. The proposed methods are not implementation specific and can be applied to any design with a mesh topology. The topology and behavior of the network are described and definitions are presented. The fault model is defined and parallel testing methods for the entire network are given.

Malek, Miroslaw↗
DOE OSTI2024

An Evaluation of the Effect of Network Cost Optimization for Leadership Class Supercomputers

Dragonfly-based networks are an extensively deployed network topology in large-scale high-performance computing due to their cost-effectiveness and efficiency. The US will soon have three Exascale supercomputers for leadership class workloads deployed using dragonfly networks. Compared to indirect networks of similar scale, the dragonfly network has considerably reduced cable lengths, cable counts, and switch counts, resulting in significant network cost savings for a given system size, however, these cost reductions result in reduced global minimal paths and more challenging routing. Additionally, large scale dragonfly networks often require a taper at the global link level, resulting in less bisection bandwidth than is achievable in other traditional non-blocking topologies of equivalent scale. While dragonfly networks have been extensively studied, they have yet to be fully evaluated in an extreme scale (i.e., exascale) system that targets capability workloads. In this paper, we present the results of the first large scale evaluation of a dragonfly network on an exascale system (Frontier) and compare its behavior to a similar scale fat-tree network on a previous generation TOP500 system (Summit). This evaluation aims to determine the effect of network cost optimizations by measuring a tapered topology’s impact on capability workloads. Our evaluation is based on a collection of synthetic microbenchmarks, mini-apps, and full scale applications. It compares the scaling efficiencies of each benchmark between the dragonfly-based Frontier and the fat-tree-based Summit systems. Our results show that a dragonfly network is $\sim \mathbf{3 0 \%}$ more cost efficient than a fat-tree topology, which amortizes to $\sim 3 \%$ of an exascale system cost. Furthermore, while tapered dragonfly networks impose significant tradeoffs, the impacts are not as broad as initially thought and are mostly seen in applications with global communication patterns, particularly all-to-all (e.g., FFT-based algorithms), but also local communication patterns (e.g., nearest-neighbor algorithms) that are sensitive to network performance variability.

Khan, Awais↗