Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Effect of Surface Site Interactions on Potentiometric Titration of Hematite (α-Fe2O3) Crystal Faces

Time dependent potentiometric pH titrations were used to study the effect of atomic scale surface structure on the protonation behavior of the structurally well defined hematite/aqueous electrolyte interfaces. Our recently proposed thermodynamic model [1,23] was applied to measured acidimetric and alkalimetric titration hysteresis loops, collected from highly organized (001), (012), and (113) crystal face terminations using pH equilibration times ranging from 15 to 30 mins. Hysteresis loop areas indicate that (001) faces equilibrate faster than the (012) and (113) faces, consistent with the different expected ensembles of singly, doubly, and triply coordinated surface sites on each face. Strongly non-linear hysteretic pH-potential relationships were found, with slopes exceeding Nernstian, collectively indicating that protonation and deprotonation is much more complex than embodied in present day surface complexation models. The asymmetrical shape of the acidimetric and alkalimetric titration branches were used to illustrate a proposed steric "leaky screen" repulsion/trapping interaction mechanism that stems from high affinity singly-coordinated sites electrostatically and sterically screening lower affinity doubly and triply coordinated sites. Our data indicate that site interaction is the dominant phenomenon defining surface potential accumulation behavior on single crystal faces of metal oxide minerals.

Environmental Molecular Sciences Laboratory↗

Effect of the surface on the secondary structure of soft landed peptide ions

Ion soft landing (SL) enables highly selective modification of substrates for applications in materials science, nanotechnology and biology. Our previous study showed that SL can be used for preparation of conformation-selected peptide arrays. Here we present a first study of the effect of the surface on the secondary structures of peptides soft-landed onto self-assembled monolayer surfaces (SAMs). Conformations of soft-landed peptide ions were examined using the newly constructed instrument that enables in situ infrared reflection absorption spectroscopy (IRRAS) characterization of surfaces during and after ion deposition. Polyalanine peptides, Ac-AnK and Ac-KAn (n=7, 15), that have been extensively studied both in solution and in the gas phase were used as model systems in this study. We demonstrate that physical and chemical properties of SAM surfaces have a strong effect on the conformations of soft-landed peptides ions. For example, deposition of the α-helical [Ac-A15K+H]+ ion on the CH3-terminated (HSAM) surface results in immobilization of both the α- and 310-helical conformations. In contrast, a significant fraction of Ac-A15K molecules are present in the β-sheet conformation on the CF3- (FSAM) and COOH-terminated (COOH-SAM) surfaces. We show that the kinetic energy of the polyalanine ion, the charge, and the initial conformation have only a minor effect on the conformation of deposited species suggesting that the interaction between the molecule and the surface plays a major role in determining the secondary structures of immobilized polyalanines. This study demonstrates that SL of mass-selected ions can be utilized for obtaining fundamental understanding of the intrinsic properties of biomolecules and surfaces responsible for conformational changes upon adsorption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Surface Engineering on LaAlO3/SrTiO3 Interfaces

Carrier properties at the LaAlO3/SrTiO3 interfaces are highly sensitive to potential profile generated by LaAlO3 top surface termination. In ambient environment, the uncontrolled surface exposure may introduce randomly distributed charge or polarization and therefore significantly impact interfacial transport by disorder related effect. As evidence, local fluctuation in carrier density and mobility has been observed in nanostructures defined by atomic force microscope (AFM) lithography. Here we report controlled modification of LaAlO3 surface by solvent deposition. Surface desorption is first carried out by sample annealing in O2 environment. The annealed LaAlO3 surfaces are later coated with various solvents of controlled thicknesses by pulsed laser deposition using frozen targets. Coated surfaces are analyzed by pulsed force and frictional force microscopy. AFM lithography is also carried out to locally alter the surface charge state and modulate the potential disorder level. Effect of different controlled surface coatings on interface are studied by magneto-transport measurement

Adhikari, Sanjay↗

Effects of Surface Turbulence Flux Parameterizations on the MJO: The Role of Ocean Surface Waves

This study investigates the sensitivity of the Madden–Julian oscillation (MJO) to changes to the bulk flux parameterization and the role of ocean surface waves in air–sea coupling using a fully coupled ocean–atmosphere–wave model. The atmospheric and ocean model components of the Energy Exascale Earth System Model (E3SM) are coupled to a spectral wave model, WAVEWATCH III (WW3). Two experiments with wind speed–dependent bulk algorithms (NCAR and COARE3.0a) and one experiment with wave-state-dependent flux (COR3.0a-WAV) were conducted. We modify COARE3.0a to include surface roughness calculated within WW3 and also account for the buffering effect of waves on the relative difference between air-side and ocean-side momentum flux. Differences in surface fluxes, primarily caused by discrepancies in drag coefficients, result in significant differences in MJO’s properties. While COARE3.0a has better convection–circulation coupling than NCAR, it exhibits anomalous MJO convection east of the date line. The wave-state-dependent flux (COR3.0-WAV) improves the MJO representation over the default COARE3.0 algorithm. Strong easterlies over the Pacific Ocean in COARE3.0a enhance the latent heat flux (LHFLX). This is responsible for the anomalous MJO propagation after the date line. In COR3.0a-WAV, waves reduce the anomalous easterlies, leading to a decrease in LHFLX and MJO dissipation after the date line. These findings highlight the role of surface fluxes in MJO simulation fidelity. Most importantly, we show that the proper treatment of wave-induced effects in bulk flux parameterization improves the simulation of coupled climate variability.

54 ENVIRONMENTAL SCIENCES↗

Effects of Surface Modification Conditions on Hydrophobicity of Silica-based Coating Additives

Superhydrophobic silica (SHS) powders are being evaluated as a potential additive to the polyurethane topcoats used in Chemical Agent Resistant Coating (CARC) systems, with the goal of improving water repellency and corrosion protection characteristics. The current generation of CARC topcoats is already highly loaded with solids, and thus there is a premium on minimization of the total SHS powder required to achieve the desired properties. Therefore, efficient surface modification of the silica and proper dispersion in the coating will be required. The effect of a dispersant on the surface modification of silica particles by chlorosilanes was addressed in this study. The properties of various SHS powders were characterized by thermogravimetric analysis and mass spectroscopy. Correlations between powder modification conditions and the ultimate effects of the modified particles on hydrophobicity of CARC topcoats were assessed. The use of contact and rolling angle measurements along with scanning electron microscopy are discussed as they pertain to the ability to quantify the effects of modified silicas on corrosion prevention coatings. Furthermore, a systematic approach to modifying and testing both powders and top coats of corrosion prevention systems is presented.

Armstrong, Beth L↗

Effect of surface loading and bulk doping of La{sup 3+} on the thermal stability and photocatalytic activity of Bi{sub 2}O{sub 2}CO{sub 3}

Graphical abstract: The Bi{sub 2}O{sub 2}O{sub 3} modified La{sup 3+} was synthesized using two methods of co-precipitation (La-Bi{sub 2}O{sub 2}O{sub 3}) and wet impregnation (La/Bi{sub 2}O{sub 2}O{sub 3}). As compared with La-Bi{sub 2}O{sub 2}O{sub 3}, Bi{sub 2}O{sub 2}CO{sub 3} can be effectively stabilized by impregnation method, as La{sup 3+} is mainly dispersed onto the surface of Bi{sub 2}O{sub 2}O{sub 3}. In photocatalytic degradation of MO, it is found that the surface modification with La{sup 3+} can enhance the photocatalytic efficiency of Bi{sub 2}O{sub 2}O{sub 3}. The surface loading La{sup 3+} could act as an effective electron scavenger to trap the CB electrons of Bi{sub 2}O{sub 2}CO{sub 3} to reduce the recombination of electrons and holes in the surface. - Highlights: • The effect of La{sup 3+} on the thermal stability of Bi{sub 2}O{sub 2}CO{sub 3} is different for the impregnation method and coprecipitation method. • Bi2O2CO3 can be effectively stabilized by impregnation method, as La3+ is mainly dispersed onto the surface of Bi2O2O3. • Surface loading La3+ is benefit for the improvement in the photocatalytic activity of Bi2O2CO3. • Surface modification of La3+ greatly suppresses the charge recombination of photogenerated electron–hole pairs in Bi2O2CO3. - Abstract: The Bi{sub 2}O{sub 2}O{sub 3} modified La{sup 3+} was synthesized using two methods of co-precipitation (La-Bi{sub 2}O{sub 2}O{sub 3}) and wet impregnation (La/Bi{sub 2}O{sub 2}O{sub 3}). The effects of the above two modification methods on the stability of Bi{sub 2}O{sub 2}CO{sub 3} after calcination and the physicochemical properties of Bi{sub 2}O{sub 2}CO{sub 3} were investigated by XRD, SEM, BET, and XPS. As compared with La-Bi{sub 2}O{sub 2}O{sub 3}, it is observed that Bi{sub 2}O{sub 2}CO{sub 3} can be effectively stabilized by impregnation method, as La{sup 3+} is mainly dispersed onto the surface of Bi{sub 2}O{sub 2}O{sub 3}. The photocatalytic activities for the methyl orange degradation for the La/Bi{sub 2}O{sub 2}CO{sub 3} and the La-Bi{sub 2}O{sub 2}CO{sub 3} samples were tested, and the results showed that surface doping (impregnation method) is benefit for the improvement in the photocatalytic activity, as compared with bulk doping (coprecipitation method). PL characterization revealed the differences in the photocatalytic process for surface doping and bulk doping. The surface modification of La{sup 3+} greatly suppresses the charge recombination of photogenerated electron−hole pairs in Bi{sub 2}O{sub 2}CO{sub 3}, which would be beneficial to improve their photocatalytic activity.

36 MATERIALS SCIENCE↗

EFFECT OF SURFACE CONDITION ON SPALLATION BEHAVIOR OF OXIDE SCALE ON SS 441 SUBSTRATE USED IN SOFC

As operating temperature of SOFC decreases, ferritic stainless steel has attracted a great deal of attention for its use as an interconnect in SOFCs because of its gas-tightness, low electrical resistivity, ease of fabrication, and cost-effectiveness. However, oxidation reaction of the metallic interconnects in a typical SOFC working environment is unavoidable. The growth stresses in the oxide scale and on the scale/substrate interface combined with the thermal stresses induced by thermal expansion coefficient mismatch between the oxide scale and the substrate may lead to scale delamination/buckling and eventual spallation during stack cooling, which can lead to serious cell performance degradation. Therefore, the interfacial adhesion strength between the oxide scale and substrate is crucial to the reliability and durability of the metallic interconnect in SOFC operating environments. In this paper, we investigated the effect of the surface conditions on the interfacial strength of oxide scale and SS441 substrate experimentally. Contrary to the conventional sense, it was found that rough surface of SS441 substrate will decrease the interfacial adhesive strength of the oxide scale and SS441 substrate

oxide scale spallation↗

Effects of Surface and Top Wind Shear on the Spatial Organization of Marine Stratocumulus-Topped Boundary Layers

Typically, the convective nature of Stratocumulus topped boundary layers (STBL) involves the motion of updrafts and downdrafts, driven by surface fluxes and radiative cooling, respectively. The balance between shear and buoyant forcings at the surface can determine the organization of updrafts between cellular and roll structures. We investigate the effect of varying shear at the surface and top of the STBL using Large Eddy Simulations, taking DYCOMS II RF01 as a base case. We focus on spatial identification of the following features: coherent updrafts and downdrafts, and observe how they are affected by varying shear. Stronger surface shear organizes the updrafts in rolls, causes less well-mixed thermodynamic profiles, and decreases cloud fraction and liquid water path (LWP). Stronger top shear also decreases cloud fraction and LWP more than surface shear, by thinning the cloud from the top. Features with stronger top than surface shear are associated with a net downward momentum transport and show early signs of decoupling. Classifying updrafts and downdrafts based on their vertical span and horizontal size confirms the dominance of tall objects spanning the whole STBL. Tall objects occupy 30% of the volume in the STBL, while short ones occupy less than 1%. For updraft and downdraft fluxes, these tall objects explain 65% of the vertical velocity variance and 83% of the buoyancy flux, on average. Stronger top shear also weakens the contribution of downdrafts to the turbulent fluxes and tilts the otherwise vertical development of updrafts.

54 ENVIRONMENTAL SCIENCES↗

Effect of Surface Heterogeneity on the Boundary-Layer Height: A Case Study at a Semi-Arid Forest

Here, we investigate the effects of an isolated meso-$\gamma$-scale surface heterogeneity for roughness and albedo on the atmospheric boundary-layer (ABL) height, with a case study at a semi-arid forest surrounded by sparse shrubland (forest area: 28 km 2 , forest length in the main wind direction: 7 km). Doppler lidar and ceilometer measurements at this semi-arid forest show an increase in the ABL height over the forest compared with the shrubland on four out of eight days. The differences in the ABL height between shrubland and forest are explained for all days with a model that assumes a linear growth of the internal boundary layer of the forest through the convective ABL upwind of the forest followed by a square-root growth into the stable free atmosphere. For the environmental conditions that existed during our measurements, the increase in ABL height due to large sensible heat fluxes from the forest (600 W~m -2 in summer) is subdued by stable stratification in the free atmosphere above the ABL, or reduced by high wind speeds in the mixed layer.

54 ENVIRONMENTAL SCIENCES↗

Sulfuric acid and hydrogen peroxide surface passivation effects on AlGaN/GaN high electron mobility transistors

In this work, we have compared SiN{sub x} passivation, hydrogen peroxide, and sulfuric acid treatment on AlGaN/GaN HEMTs surface after full device fabrication on Si substrate. Both the chemical treatments resulted in the suppression of device pinch-off gate leakage current below 1 μA/mm, which is much lower than that for SiN{sub x} passivation. The greatest suppression over the range of devices is observed with the sulfuric acid treatment. The device on/off current ratio is improved (from 10{sup 4}–10{sup 5} to 10{sup 7}) and a reduction in the device sub-threshold (S.S.) slope (from ∼215 to 90 mV/decade) is achieved. The sulfuric acid is believed to work by oxidizing the surface which has a strong passivating effect on the gate leakage current. The interface trap charge density (D{sub it}) is reduced (from 4.86 to 0.90 × 10{sup 12 }cm{sup −2} eV{sup −1}), calculated from the change in the device S.S. The gate surface leakage current mechanism is explained by combined Mott hopping conduction and Poole Frenkel models for both untreated and sulfuric acid treated devices. Combining the sulfuric acid treatment underneath the gate with the SiN{sub x} passivation after full device fabrication results in the reduction of D{sub it} and improves the surface related current collapse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of Fe/SiO{sub 2} and iron oxides/SiO{sub 2} nanocomposites by long-term ball milling

Graphical abstract: - Highlights: • Iron–iron oxides/silica composites are synthesized by long term dry ball-milling. • Bcc iron and α-quartz powders are used as precursors. • Surface effects enhance coercivity in iron/silica nanocomposites. • In spite of their small size, about 10 nm, iron particles are ferromagnetic. • Ferro and superparamagnetic particles are found in maghemite/silica composites. - Abstract: Iron oxide/SiO{sub 2} nanocomposites are synthesized by dry ball-milling a mixture of bcc Fe and α-quartz powders for prolonged times. A sequence of nanocomposites is obtained, with small magnetic particles dispersed in a non magnetic, amorphous matrix. The powders are characterized by X-ray diffraction and transmission electron microscopy. The magnetic hysteresis properties are investigated in the range 50–300 K. After 120 h milling, deformed, non-spherical, α-Fe nanocrystallites of about 10 nm in size and very few small (<10 nm) maghemite particles are found. At room temperature, iron particles are ferromagnetic and a large effective magnetic anisotropy is estimated, which is mainly attributed to surface effects. Between 160 and 200 h milling, maghemite nanoparticles are observed while after 220 h grinding, hematite phase appears; after 340 h milling, the sample consists of ferromagnetic hematite particles with a broad size distribution (5–50 nm) embedded in an amorphous matrix.

36 MATERIALS SCIENCE↗

Effect of surface roughness on phase transition timing in megaampere pulsed-power–driven exploding conductors

An understanding of material phase transitions in megaampere pulsed-power–driven exploding conductors is important for predicting the growth of hydrodynamic instabilities in magneto-inertial fusion concepts. Here, this study analyzes phase transitions in electrical conductor explosions using 1D Lagrangian and 2D arbitrary Lagrangian–Eulerian resistive magnetohydrodynamic simulations to show that micrometer-scale surface roughness can lead to the electrothermal instability (ETI), a feedback effect that concentrates resistive heating and leads to early melting and ablation. Simulations of the Mykonos electrothermal instability II (METI-II) experiment show melting begins 19% sooner for machined rods with micrometer-scale surface roughness than for rods without these features. The surface magnetic field is 41 T around the initial region of melt, representing a lower magnitude than both the 86 T from 1D simulations and the 85 T threshold reported elsewhere. In 2D simulations with micrometer-scale surface roughness, temperature measurements indicate the critical point temperature of aluminum is reached 17% faster in comparison with 1D simulations. Values from 2D simulations with surface roughness align with predictions from ETI theory, and the observed temperature redistribution further supports the ETI as an underlying mechanism. Simulation results are validated against experimental photonic Doppler velocimetry data. This study shows 1D simulations are adequate to model conductors with sub-micrometer-scale surface roughness in this high-energy-density regime; however, 2D or 3D simulations are required to capture the full range of physics for accurately describing phase transitions in conductors with micrometer-scale or larger surface roughness.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dimensional scale effects on surface enhanced Raman scattering efficiency of self-assembled silver nanoparticle clusters

A study of the Surface Enhanced Raman Scattering (SERS) from micrometric metallic nanoparticle aggregates is presented. The sample is obtained from the self-assembly on glass slides of micro-clusters of silver nanoparticles (60 and 100 nm diameter), functionalized with the organic molecule 4-aminothiophenol in water solution. For nanoparticle clusters at the micron scale, a maximum enhancement factor of 10{sup 9} is estimated from the SERS over the Raman intensity ratio normalized to the single molecule contribution. Atomic force microscopy, correlated to spatially resolved Raman measurements, allows highlighting the connection between morphology and efficiency of the plasmonic system. The correlation between geometric features and SERS response of the metallic structures reveals a linear trend of the cluster maximum scattered intensity as a function of the surface area of the aggregate. On given clusters, the intensity turns out to be also influenced by the number of stacking planes of the aggregate, thus suggesting a plasmonic waveguide effect. The linear dependence results weakened for the largest area clusters, suggesting 30 μm{sup 2} as the upper limit for exploiting the coherence over large scale of the plasmonic response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling quantum yield, emittance, and surface roughness effects from metallic photocathodes

Here, detailed measurements of momentum distributions of emitted electrons have allowed the investigation of the thermal limit of the transverse emittance from metal photocathodes. Furthermore, recent developments in material design and growth have resulted in photocathodes that can deliver high quantum efficiency and are sufficiently robust to use in high electric field gradient photoinjectors and free electron lasers. The growth process usually produces photoemissive material layers with rough surface profiles that lead to transverse accelerating fields and possible work function variations, resulting in emittance growth. To better understand the effects of temperature, density of states, and surface roughness on the properties of emitted electrons, we have developed realistic three-dimensional models for photocathode materials with grated surface structures. They include general modeling of electron excitation due to photon absorption, charge transport, and emission from flat and rough metallic surfaces. The models also include image charge and field enhancement effects. We report results from simulations with flat and rough surfaces to investigate how electron scattering, controlled roughness, work function variation, and field enhancement affect emission properties. Comparison of simulation results with measurements of the quantum yield and transverse emittance from flat Sb emission surfaces shows the importance of including efficient modeling of photon absorption, temperature effects, and the material density of states to achieve agreement with the experimental data.

36 MATERIALS SCIENCE↗

Effect of Surface Finish on High-Temperature Oxidation of Steels in CO 2 , Supercritical CO 2 , and Air

Current and future power systems require steels resistant to high-temperature oxidation in CO 2 -rich environments. The introduction of structural defects by various surface treatments can profoundly affect the oxidation/corrosion behavior of steels in many environments. This effect is largely unexplored for steels exposed to high-temperature CO 2 , which is the focus of this work. We prepared Grade 22, Grade 91, 347H, and 310S steels with three different surface finishes, ranging from little to substantial surface damage, and exposed the steels to 1 bar CO 2 , 200 bar supercritical CO 2 , and laboratory air at 550 °C for up to 1500 h. Surface finish had little impact on the oxidation behavior of low-Cr (2 wt%) Grade 22 and high-Cr (25 wt%) 310S steels. In contrast, intermediate-Cr steels Grade 91 (8 wt%) and 347H (17 wt%) generally showed improved oxidation and carburization resistance with increasing extent of surface damage, which was attributed to the delay or prevention of the onset of Fe-rich oxide nodule growth. Comparison between exposure environments suggests that this effect is more complex for CO 2 compared to air and that it is additionally affected by CO 2 pressure. In conclusion, the results suggest that surface treatments should be considered as one approach to achieve improved corrosion resistance in high-temperature CO 2 , particularly for steels containing Cr levels near the transition that is required to form and maintain a protective Cr-rich oxide scale.

36 MATERIALS SCIENCE↗

Effect of Surface Stoichiometry on Blinking and Hole Trapping Dynamics in CdSe Nanocrystals

Here, we measure the photoinduced carrier dynamics as the surface composition of CdSe nanocrystals is systematically varied from metal rich (~80% surface Cd) to nearly stoichiometric (~50% surface Cd). Using time-resolved optical spectroscopy, we determine that the luminescence lifetime is controlled by the rate of hole trapping at the newly exposed surface selenium atoms. However, the increased rate of the photoluminescence decay is not sufficient to explain the decreased photoluminescence quantum yield, and requires a growing proportion of nanocrystals in a dark or “OFF” state to explain the data. A global kinetic model is proposed that relates the fraction of selenium sites to the rate of hole trapping. A linear relationship between the rate of hole trapping and the fraction of exposed Se sites (x Se ) is observed within the range of accessible stoichiometries (x Se = 0.5–0.2). Extrapolation to higher surface cadmium fractions suggests that not all Se sites serve as effective hole traps. These findings confirm the strong nonlinear dependence of the fluorescence yield on the nanocrystal stoichiometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Surface Oxidation Effects During Low Energy BF{sub 2}{sup +} Ion Implantation

We present results on silicon wafer surface oxidation observed during low energy high dose BF{sub 2}{sup +} implantation. Experiments were performed on single-crystal and pre-amorphized silicon wafers that help elucidate the surface structure impact on boron distribution profiles and dose retention. Implanters with different architectures were compared including both single wafer and batch systems. It was found that the oxidation rate depends on implanter type and design, and that the surface oxide thickness is a linear function of implantation dose and time. Surface oxidation is significantly higher for batch systems compared to single wafer tools. This is due primarily to the significantly lower beam duty cycle on the batch implanter. The oxide thicknesses estimated from SIMS oxygen profiles are in agreement with ellipsometry measurements after spike annealing, and show a similar difference between single wafer and batch implanters. SIMS boron distribution profiles after implantation were compared and used to calculate retained dose. In the medium dose range ({<=}3x10{sup 14} at/cm{sup 2}) the profiles from different implanters are well matched and the dose retention is close to 100%. For the higher dose range ({>=}3x10{sup 15} at/cm{sup 2}) retention for the batch implanter is significantly less than the single wafer tool and depends on the wafer surface structure. A higher oxidation rate results in lower dopant activation and higher Rs value after spike annealing. For high implantation doses the single wafer system allows much higher dose retention and better boron activation after annealing.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗