Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “strength”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Ductile adhesive elastomers with force-triggered ultra-high adhesion strength

Elastomers play a vital role in many forthcoming advanced technologies in which their adhesive properties determine materials’ interface performance. Despite great success in improving the adhesive properties of elastomers, permanent adhesives tend to stick to the surfaces prematurely or result in poor contact depending on the installation method. Thus, elastomers with on-demand adhesion that is not limited to being triggered by UV light or heat, which may not be practical for scenarios that do not allow an additional external source, provide a solution to various challenges in conventional adhesive elastomers. Herein, we report a novel, ready-to-use, ultra high-strength, ductile adhesive elastomer with an on-demand adhesion feature that can be easily triggered by a compression force. The precursor is mainly composed of a capsule-separated, two-component curing system. After a force-trigger and curing process, the ductile adhesive elastomer exhibits a peel strength and a lap shear strength of 1.2 × 10 4 N m -1 and 7.8 × 10 3 kPa, respectively, which exceed the reported values for advanced ductile adhesive elastomers. The ultra-high adhesion force is attributed to the excellent surface contact of the liquid-like precursor and to the high elastic modulus of the cured elastomer that is reinforced by a two-phase design. In conclusion, incorporation of such on-demand adhesion into an elastomer enables a controlled delay between installation and curing so that these can take place under their individual ideal conditions, effectively reducing the energy cost, preventing failures, and improving installation processes.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Hotspot formation due to shock-induced pore collapse in 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX): Role of pore shape and shock strength in collapse mechanism and temperature

The shock to detonation transition in heterogeneous high energy density solids starts with the spatial localization of mechanical energy into so-called hotspots that form due to the interaction between the leading wave and microstructural features and defects. We used large-scale molecular dynamics to characterize the hotspots resulting from the shock-induced collapse of cylindrical voids and elongated cracks focusing on the effect of shock strength, defect shape, and size. The temperature fields resulting from the collapse of cracks elongated along the shock direction show significantly higher sensitivity to both shock strength and size than cylindrical voids. Cracks 80 nm in length result in temperatures almost three times higher than voids 80 nm in diameter, reaching values corresponding to the ideal case of isentropic recompression of a gas. The molecular dynamics trajectories reveal the atomic origin of this contrasting behavior. While circular voids undergo a transition from viscoelastic pore collapse to a hydrodynamic regime with increasing shock strength, shock focusing in elongated cracks results in jetting and vaporization which, upon recompression, leads to increased heating.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Using simultaneous x-ray diffraction and velocity interferometry to determine material strength in shock-compressed diamond

We determine the strength of laser shock-compressed polycrystalline diamond at stresses above the Hugoniot elastic limit using a technique combining x-ray diffraction from the Linac Coherent Light Source with velocity interferometry. X-ray diffraction is used to measure lattice strains, and velocity interferometry is used to infer shock and particle velocities. These measurements, combined with density-dependent elastic constants calculated using density functional theory, enable determination of material strength above the Hugoniot elastic limit. Furthermore, our results indicate that diamond retains approximately 20 GPa of strength at longitudinal stresses of 150–300 GPa under shock compression.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-throughput bend-strengths of ultra-small polysilicon MEMS components

The strength distribution of polysilicon bend specimens, approximately 10 μm in size, is measured using a high-throughput microelectromechanical system fabrication and testing method. The distribution is predicted from reference tests on tensile specimens and finite element analysis of the bend specimen geometry incorporated into a stochastic extreme-value strength framework. Agreement between experiment and prediction suggests that the ultra-small specimens may be at the limit of extreme-value scaling and contain only one strength-controlling flaw/specimen.

Cook, Robert F. (ORCID:0000000304228881)↗
DOE OSTI2021

Shear strength measurements and hydrostatic compression of rhenium diboride under high pressures

Shear strength measurements have been carried out on rhenium diboride, ReB 2 , to a pressure of 74 GPa using a Radial X-ray Diffraction (R-XRD) technique in a diamond anvil cell using platinum as an internal x-ray pressure standard. The R-XRD result has provided a unique insight into the deformation of hexagonal crystal lattice under non-hydrostatic compression and variation of shear strength with increasing pressure. From R-XRD data, we have estimated hydrostatic component of compression to determine an equation of state of rhenium diboride yielding a bulk modulus of K 0 = 366 ± 25 GPa with a pressure derivative $K^{'}_{0}$ = 4.3 ± 0.5 in good agreement with hydrostatic density functional theory calculations. Here, the average lower bound of shear strength (τ) from various diffraction planes was then calculated using the measured interplanar d-spacing (d m ) and hydrostatic component of d-spacing (d p ) to be shown to approach 6.7 ± 0.4 GPa at 70 GPa. Our results show that the anisotropic compression effects observed in ReB 2 under hydrostatic compression are correlated to electronic structure changes under compression as predicted by theoretical calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating size effects on the yield strength of single-crystal Cu via the Richtmyer–Meshkov instability

Capturing the dynamic response of a material under high strain-rate deformation often demands challenging and time consuming experimental effort. While shock hydrodynamic simulation methods can aid in this area, a priori characterizations of the material strength under shock loading and spall failure are needed in order to parameterize constitutive models needed for these computational tools. Moreover, parameterizations of strain-rate-dependent strength models are needed to capture the full suite of Richtmyer–Meshkov instability (RMI) behavior of shock compressed metals, creating an unrealistic demand for these training data solely on experiments. Herein, we sweep a large range of geometric, crystallographic, and shock conditions within molecular dynamics (MD) simulations and demonstrate the breadth of RMI in Cu that can be captured from the atomic scale. In this work, yield strength measurements from jetted and arrested material from a sinusoidal surface perturbation were quantified as Y RMI = 0.787 ± 0.374 GPa, higher than strain-rate-independent models used in experimentally matched hydrodynamic simulations. Defect-free, single-crystal Cu samples used in MD will overestimate Y RMI , but the drastic scale difference between experiment and MD is highlighted by high confidence neighborhood clustering predictions of RMI characterizations, yielding incorrect classifications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

The impact of the electric field of metal ions on the vibrations and internal hydrogen bond strength in alkali metal ion di- and triglycine complexes

Using infrared predissociation spectroscopy of cryogenic ions, we revisit the vibrational spectra of alkali metal ion (Li+, Na+, K+) di- and triglycine complexes. We assign their most stable conformation, which involves metal ion coordination to all C=O groups and an internal NH⋯NH2 hydrogen bond in the peptide backbone. An analysis of the spectral shifts of the OH and C=O stretching vibrations across the different metal ions and peptide chain lengths shows that these are largely caused by the electric field of the metal ion, which varies in strength as a function of the square of the distance. The metal ion–peptide interaction also remotely modulates the strength of internal hydrogen bonding in the peptide backbone via the weakening of the amide C=O bond, resulting in a decrease in internal hydrogen bond strength from Li+ > Na+ > K+.

Chemistry↗
DOE OSTI2023

Modulation of polar auxin transport identifies the molecular determinants of source–sink carbon relationships and sink strength in poplar

Abstract Source-to-sink carbon (C) allocation driven by the sink strength, i.e., the ability of a sink organ to import C, plays a central role in tissue growth and biomass productivity. However, molecular drivers of sink strength have not been thoroughly characterized in trees. Auxin, as a major plant phytohormone, regulates the mobilization of photoassimilates in source tissues and elevates the translocation of carbohydrates toward sink organs, including roots. In this study, we used an ‘auxin-stimulated carbon sink’ approach to understand the molecular processes involved in the long-distance source–sink C allocation in poplar. Poplar cuttings were foliar sprayed with polar auxin transport modulators, including auxin enhancers (AE) (i.e., IBA and IAA) and auxin inhibitor (AI) (i.e., NPA), followed by a comprehensive analysis of leaf, stem and root tissues using biomass evaluation, phenotyping, C isotope labeling, metabolomics and transcriptomics approaches. Auxin modulators altered root dry weight and branching pattern, and AE increased photosynthetically fixed C allocation from leaf to root tissues. The transcriptome analysis identified highly expressed genes in root tissue under AE condition including transcripts encoding polygalacturonase and β-amylase that could increase the sink size and activity. Metabolic analyses showed a shift in overall metabolism including an altered relative abundance levels of galactinol, and an opposite trend in citrate levels in root tissue under AE and AI conditions. In conclusion, we postulate a model suggesting that the source–sink C relationships in poplar could be fueled by mobile sugar alcohols, starch metabolism-derived sugars and TCA-cycle intermediates as key molecular drivers of sink strength.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Measurement of magnetic dipole strength in 40 Ar between 9.3 and 10.3 MeV excitation energy and impact on neutral current neutrino interaction

The magnetic dipole strength 𝐵⁡(𝑀⁢1 ↑) of 40 Ar was measured in the excitation energy range between 9.3 and 10.3 MeV. The nuclear resonance fluorescence technique was used with monoenergetic, linearly polarized incident photon beams. The new data increase the known 𝐵⁡(𝑀⁢1 ↑) strength in this important excitation energy range by a factor of 2, resulting in an equivalent increase of the calculated neutral current neutrino cross section of 40 Ar . This observation is of special interest for liquid-argon (LAr)-based neutrino detectors. 𝐵⁡(𝑀⁢1 ↑) strength has not been found between 10.3 and 11.7 MeV excitation energy. In conclusion, with the new data, a more reliable detection capability of the large Deep Underground Neutrino Experiment LAr detectors can be derived for potential core-collapse supernova neutrinos via the neutral current interaction.

Energy levels↗
DOE OSTI2026

𝑙-forbidden 𝑀⁢1 strengths near 100 Sn from knockout reactions in Cd and Sn

Neutron knockout reactions on beams of 104,102 Cd and 104 Sn are presented. States in the residual 103,101 Cd and 103 Sn nuclei are populated, including low-lying 7/2 + states of 𝜈⁢𝑔 7/2 character. These states have half-lives ≈ 400 ps due to their low energy and hindered 𝐵⁡(𝑀⁢1;7/2 + →5/2 + ) strengths. The excited-state half-lives were measured using their Doppler-shifted line shapes, and the resulting 𝐵⁡(𝑀⁢1) strengths are compared to valence space in medium similarity renormalization group (VS-IMSRG) calculations. Lastly, the VS-IMSRG calculations underpredict the 𝑙-forbidden 𝑀⁢1 strengths in the 100 Sn region, as well as in other regions of the nuclear chart near 40 Ca and 208 Pb.

90 ≤ A ≤ 149↗
DOE OSTI2025

200-fold increase in dynamic strength of platinum at 430 GPa without a phase transformation

Here, the high-pressure strength of solid platinum is studied at the National Ignition Facility via Rayleigh-Taylor ripple growth under ramp compression. Laser-driven experiments reached pressures up to 430 GPa, collecting velocimetry and radiography data. Despite no phase transformation, the observed ripple growth aligns with hydrodynamic simulations using an amplified Steinberg-Guinan model, resulting in a 200-fold increase in strength. Molecular dynamics simulations of platinum ramp compression yield similar von Mises stress at comparable high pressure and high strain rate conditions. These findings represent the highest-pressure strength measurements ever achieved for platinum and offer critical insight into its significant strengthening behavior under high pressure and strain rate conditions.

Righi, Gaia [Lawrence Livermore National Laborator↗
DOE OSTI2024

Analog B ( M 1 ) strengths in the T z = ± 3 2 mirror nuclei Mn 47 and Ti 47

The lifetimes of the first excited 7 2 − states in the T z = ± 3 2 mirror nuclei Mn 47 and Ti 47 have been extracted utilizing the γ -ray line shape method, giving τ = 687 ( 36 ) ps and τ = 331 ( 15 ) ps respectively. Since these transitions are essentially pure M 1 transitions, these results allow for a high-precision comparison of analog M 1 strengths in mirror nuclei. The two analog B ( M 1 ) s are observed to be identical to a precision of about 10 % . The expected dependence of the transition matrix element with T z has been used to extract the separate isoscalar and isovector components of the transition strength, and the results are discussed in the context of predictions, based on the isospin formalism, regarding analog B ( M 1 ) strengths. Published by the American Physical Society 2024

39 ≤ A ≤ 58↗
DOE OSTI2020

Ultimate Strength of Metals

We present a theoretical model that predicts the peak strength of polycrystalline metals based on the activation energy (or stress) required to cause deformation via amorphization. Building on extensive earlier work, this model is based purely on materials properties, requires no adjustable parameters, and is shown to accurately predict the strength of four exemplar metals (fcc, bcc, and hcp, and an alloy). This framework reveals new routes for design of more complex high-strength materials systems, such as compositionally complex alloys, multiphase systems, nonmetals, and composite structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Δ$\textit{K}=0 \textit{M}1$ Excitation Strength of the Well-Deformed Nucleus 164 Dy from $\textit{K}$ Mixing

We report the size of a Δ$\textit{K}=0 \textit{M}1$ excitation strength has been determined for the first time in a predominantly axially deformed even-even nucleus. It has been obtained from the observation of a rare $\textit{K}$-mixing situation between two close-lying $J^π = 1^+$ states of the nucleus 164 Dy with components characterized by intrinsic projection quantum numbers $\textit{K}$ = 0 and $\textit{K}$ = 1. Nuclear resonance fluorescence induced by quasimonochromatic linearly polarized γ-ray beams provided evidence for $\textit{K}$ mixing of the 1 + states at 3159.1(3) and 3173.6(3) keV in excitation energy from their γ-decay branching ratios into the ground-state band. The Δ$\textit{K}$ = 0 transition strength of $B(M1; 0^+_1 → 1^+_{K=0}) = 0.008(1)μ^2_N$ was inferred from a mixing analysis of their $\textit{M}$1 transition rates into the ground-state band. It is in agreement with predictions from the quasiparticle phonon nuclear model. This determination represents first experimental information on the $\textit{M}$1 excitation strength of a nuclear quantum state with a negative $\mathcal{R}$-symmetry quantum number.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

A Discussion of Strength Reduction Factor Development for Thermal Aging Effect on Nuclear Structural Alloys

In consideration of structural alloy property deterioration during long-term exposure to elevated temperatures, the yield and ultimate tensile strength reduction factors are provided in the Boiler and Pressure Vessel Code Section III for nuclear reactor component design and operation analysis. Because the Gen IV reactor requirement of 40 ~ 60 years of service life makes it difficult to acquire such long exposure test data for developing the reduction factors, they must be derived from test data with relatively short exposure by predictive methods considered to be reasonably reliable. A novel approach with a physically-based model has recently been proposed for application to development of reduction factors for 9Cr-1Mo-V. In the model, contributors to the tensile strength are first identified and related to definite microstructural features of the alloy, then some physically-based methods are employed to simulate the microstructural evolution, and finally the model is assembled with test-data-calibrated parameters to generate the yield and ultimate tensile strength reduction factors covering elevated temperature exposure for up to 57 years. The approach is undoubtedly a trailblazing development that will, if proven reliable, lead to a paradigm shift in predicting thermal aging behavior of many other alloys. Its debut application to Section III, however, concerns nuclear safety and naturally warrants objective, impartial, and thorough technical scrutiny. In the present paper, the novel and conventional approaches are discussed. Necessary improvements to the novel approach are recommended for its application to nuclear structural component design and analysis, and for its potential expanded use to other alloys.

Ren, Weiju↗
DOE OSTI2024

EXPERIMENTAL VALIDATION OF THEORETICAL BURST STRENGTH SOLUTION FOR DEFECT-FREE THICK-WALLED PIPES

The burst pressure of line pipes is an important strength property required in pipeline design and integrity management. Historically, the Barlow formula in conjunction with the ultimate tensile stress (UTS) of pipeline steels were utilized to estimate the burst strength of line pipes. However, the Barlow formula did not consider the plastic flow effect for ductile steels and is applicable only to thin-walled pipes. In 2006, the present author proposed a new multiaxial plastic yield theory and obtained a theoretical Zhu-Leis solution of burst strength for defect-free thin-walled pipes in term of UTS and strain hardening exponent n of pipeline steels. The Zhu-Leis solution has been validated by various burst test data for thin-walled pipelines for a wide range of steel grades from Grade B to X120. Recently, the present author extended the Zhu-Leis theory of plasticity to thick-walled pipes and obtained the Zhu-Leis solution of burst pressure for thick-walled pipes. The proposed burst pressure solution is applicable to both thin and thick-walled pipes. To experimentally validate the proposed theoretical burst pressure solution, this paper obtains a set of burst test data for three thick-walled pipes in Grade B carbon steel with a nominal diameter of 2.375 inches and three nominal wall thicknesses, resulting in D/t = 15.4, 10.9, 6.9. Through comparisons, these burst data validate the theoretical burst pressure solution for thick-walled pipes. Moreover, two additional burst test datasets collected from literature for thin and thick-walled pipes further validate the proposed burst pressure solution for both thin and thick-walled pipes.

Zhu, Xiankui↗
DOE OSTI2020

3D printed Mg-NiTi interpenetrating-phase composites with high strength, damping capacity, and energy absorption efficiency

It is of significance, but still remains a key challenge, to simultaneously enhance the strength and damping capacities in metals, as these two properties are often mutually exclusive. Here, we provide a multidesign strategy for defeating such a conflict by developing a Mg-NiTi composite with a bicontinuous interpenetrating-phase architecture through infiltration of magnesium melt into three-dimensionally printed Nitinol scaffold. The composite exhibits a unique combination of mechanical properties with improved strengths at ambient to elevated temperatures, remarkable damage tolerance, good damping capacities at differing amplitudes, and exceptional energy absorption efficiency, which is unprecedented for magnesium materials. The shape and strength after deformation can even be largely recovered by heat treatment. This study offers a new perspective for the structural and biomedical applications of magnesium.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrahigh strength, modulus, and conductivity of graphitic fibers by macromolecular coalescence

Theoretical considerations suggest that the strength of carbon nanotube (CNT) fibers be exceptional; however, their mechanical performance values are much lower than the theoretical values. To achieve macroscopic fibers with ultrahigh performance, we developed a method to form multidimensional nanostructures by coalescence of individual nanotubes. The highly aligned wet-spun fibers of single- or double-walled nanotube bundles were graphitized to induce nanotube collapse and multi-inner walled structures. These advanced nanostructures formed a network of interconnected, close-packed graphitic domains. Their near-perfect alignment and high longitudinal crystallinity that increased the shear strength between CNTs while retaining notable flexibility. The resulting fibers have an exceptional combination of high tensile strength (6.57 GPa), modulus (629 GPa), thermal conductivity (482 W/m·K), and electrical conductivity (2.2 MS/m), thereby overcoming the limits associated with conventional synthetic fibers.

36 MATERIALS SCIENCE↗