Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stiffness”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

A gravo-aeroelastically scaled wind turbine rotor at field-prototype scale with strict structural requirements

A new sub-scale field-prototype design solution is developed to realize the dynamics, structural response, and distributed loads (gravitational, aerodynamic, centrifugal) that are characteristic of a full-scale large, modern wind turbine rotor. Prior work in sub-scale wind turbine testing has focused on matching aerodynamic/aero-elastic characteristics of full-scale rotors at wind tunnel scale. However, large-scale rotor designs must expand beyond this limited set of scaling parameters for cost-effective prototyping and meet strict requirements for structural safety for field testing. Here, the challenge lies in producing a structural design meeting two competing objectives: novel scaling objectives that prescribe the sub-scale blade to have low mass and stiffness; and traditional structural safety objectives that drive the design to have higher stiffness and mass. A 20% gravo-aeroelastically scaled wind turbine blade is developed successfully that satisfies these competing objectives. First, it achieved close agreement for non-dimensional tip deflection and flap-wise blade frequency (both within 2.1%) with a blade mass distribution constrained to produce target gravitational and centrifugal loads. Second, the entire blade structure was optimized to ensure a safe, manufacturable solution meeting strict strength requirements for a testing site that can experience up to 45 m/s wind gusts. The prototype-scale blade was fabricated and successfully proof-load tested.

17 WIND ENERGY↗
DOE OSTI2025

From TPL assessment to design optimization: Wave energy converter control co-design applied to the RM3

The Reference Model (RM) project developed six marine energy converter concepts using a sequential design methodology, which, while widely adopted in the industry, often overlooks interactions between system components, resulting in suboptimal designs. One such example is the Reference Model 3 (RM3), a two-body point absorber wave energy converter (WEC). An assessment using the Technology Performance Level (TPL) revealed that RM3’s low power-to-cost ratio, partly due to expensive steel construction, limits its techno-economic performance. Here, this study aims to redesign RM3 by reducing its scale and employing control co-design to integrate WEC and Power Take-Off (PTO) dynamics, constraints, and cost considerations within an optimization framework. We demonstrate the limitations of RM3’s current PTO design and explore the benefits of scaling down to enhance techno-economic viability by lowering material costs. Using WecOptTool, we conduct a parameter sweep over gear ratios and spring stiffnesses for various Commercial Off-The-Shelf generators in irregular wave conditions. Our findings emphasize the importance of aligning PTO components with WEC dynamics, showing that control co-design and strategic scaling can improve RM3’s power-to-cost ratio. This study presents a transferable example of applied control co-design for other WECs, supporting early-stage developers in their design decisions.

Off the shelf components↗
DOE OSTI2023

Development of compact tokamak fusion reactor use cases to inform future transport studies

The OMFIT STEP (Meneghini et al. , Nucl. Fusion , vol. 10, 2020, p. 1088) workflow has been used to develop inductive and steady-state H-mode core plasma scenario use cases for a $B_0 = 8 \, {\rm T}$ , $R_0 = 4 \, {\rm m}$ machine to help guide and inform future higher-fidelity studies of core transport and confinement in compact tokamak reactors. Both use cases are designed to produce 200 MW or more of net electric power in an up-down symmetric plasma with minor radius $a = 1.4 \, {\rm m}$ , elongation $\kappa = 2.0$ , triangularity $\delta = 0.5$ and effective charge $Z_{{\rm eff}} \simeq 2$ . Additional considerations based on the need for compatibility of the core with reactor-relevant power exhaust solutions and external actuators were used to guide and constrain the use case development. An extensive characterization of core transport in both scenarios is presented, the most important feature of which is the extreme sensitivity of the results to the quantitative stiffness level of the transport model used as well as the predicted critical gradients. This sensitivity is shown to arise from different levels of transport stiffness exhibited by the models, combined with the gyroBohm-normalized fluxes of the predictions being an order of magnitude larger than other H-mode plasmas. Additionally, it is shown that although heating in both plasmas is predominantly to the electrons and collisionality is low, the plasmas remain sufficiently well coupled for the ions to carry a significant fraction of the thermal transport. As neoclassical transport is negligible in these conditions, this situation inherently requires long-wavelength ion gyroradius-scale turbulence to be the dominant transport mechanism in both plasmas. These results are combined with other basic considerations to propose a simple heuristic model of transport in reactor-relevant plasmas, along with simple metrics to quantify coupling and core transport properties across burning and non-burning plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Simplified Models of the Bicarbonate Buffer for Scaled Simulations of CO 2 Electrolyzers

Bicarbonate electrolytes are used in a range of chemical processes; however, resolved simulation of these electrolytes is difficult, as disparate reaction time scales lead to numerical stiffness and the formation of fine boundary layers. Based on several physically motivated approximations, we reduce the full set of chemical reactions within a bicarbonate electrolyte to a simpler subset, eliminating the numerical stiffness. We supported this simplification via a two-variable singular perturbation expansion and demonstrated that under neutral conditions (6 < pH < 10) typically found within a fluid-fed CO 2 electrolyzer, the simplifications lead to negligible error. Here, we also discuss two alternative simplifications, one valid at high pH and another valid at arbitrary pH. These simplifications reduce the condition number of the matrices resulting from spatiotemporal discretization by up to 10 orders of magnitude and enable three-dimensional (3D) simulation of CO 2 electrolyzers containing carbonate solutions.

10 SYNTHETIC FUELS↗
DOE OSTI2020

High-Strength Polylactic Acid (PLA) Biocomposites Reinforced by Epoxy-Modified Pine Fibers

The stiffness and tensile strength of biopolymers (e.g., polylactic acid (PLA)) are less than desirable for load-bearing applications in their neat form. The use of natural fibers as reinforcements for composites (for large-scale three-dimensional (3D) printing) has expanded rapidly, attributable to their low weight, low cost, high stiffness, and renewable nature. Silane and acid/alkali are typically used to modify the surface of natural fibers to improve the fiber/polymer interfacial adhesion. In this study, a simple method of impregnation was developed to modify pine fibers (loblolly, mesh size of 90–180 μm, 30 wt %) with a solvent-borne epoxy to reinforce PLA. As a benefit of the epoxy modification (0.5–10 wt %), the tensile strengths and Young’s moduli of the epoxy-modified pine/PLA composites increased by up to 20 and 82%, respectively, as compared to that of neat PLA. Furthermore, the epoxy-modified pine/PLA composites, with an optimum epoxy modification (1.0 wt %), had fewer voids on the fracture surface as compared with pine/PLA composites without the modification of pine fibers via epoxy. Finally, results confirmed that epoxy partially penetrated the pore/hollow inner structures of pine fibers and improved the fiber/matrix interfacial adhesion. Epoxy modification is found to be a simple and effective technique to improve the properties of biocomposites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Evolution of Elastic and Mechanical Properties During Fault Shear: The Roles of Clay Content, Fabric Development, and Porosity

Phyllosilicates weaken faults due to the formation of shear fabrics. Although the impacts of clay abundance and fabric on frictional strength, sliding stability, and porosity of faults are well studied, their influence on elastic properties is less known, though they are key factors for fault stiffness. We document the role that fabric and consolidation play in elastic properties and show that smectite content is the most important factor determining whether fabric or porosity controls the elastic response of faults. We conducted a suite of shear experiments on synthetic smectite-quartz fault gouges (10–100 wt% smectite) and sediment incoming to the Sumatra subduction zone. We monitored Vp, Vs, friction, porosity, shear and bulk moduli. We find that mechanical and elastic properties for gouges with abundant smectite are almost entirely controlled by fabric formation (decreasing mechanical and elastic properties with shear). Though fabrics control the elastic response of smectite-poor gouges over intermediate shear strains, porosity is the primary control throughout the majority of shearing. Elastic properties vary systematically with smectite content: High smectite gouges have values of Vp ~ 1,300–1,800 m/s, Vs ~ 900–1,100 m/s, K ~ 1–4 GPa, and G ~ 1–2 GPa, and low smectite gouges have values of Vp ~ 2,300–2,500 m/s, Vs ~ 1,200–1,300 m/s, K ~ 5–8 GPa, and G ~ 2.5–3 GPa. We find that, even in smectite-poor gouges, shear fabric also affects stiffness and elastic moduli, implying that while smectite abundance plays a clear role in controlling gouge properties, other fine-grained and platy clay minerals may produce similar behavior through their control on the development of fabrics and thin shear surfaces.

58 GEOSCIENCES↗
DOE OSTI2024

Velocity Dependence of Rate‐And‐State Friction in Granular Fault Gouge and Implications for Slow‐Slip Events

Abstract The standard rate‐and‐state friction (RSF) has extensively captured frictional behaviors, but it fails to explain the velocity dependence of frictional stability transition and widespread slow‐slip events (SSEs) in experiments and nature adequately. An alternative microphysical Chen‐Niemeijer‐Spiers (CNS) model can well describe the velocity dependence of frictional behaviors of granular gouges. Using the original CNS model, standard RSF parameters can be quantified microphysically. However, some micro‐parameters are not easy to estimate quantitatively, making it difficult to extrapolate to natural and experimental conditions. Here, we simplify the microphysically‐derived RSF parameters including direct effect a , evolution effect b , and critical slip distance D c , as well as equivalent values ( a eq , b eq , and D eq ). The simplified friction parameters directly illustrate their velocity dependence, namely the essentially constant a , a eq , and D c , negatively velocity‐dependent b and b eq , as well as varying D eq for different laws. They are roughly consistent with experimental results in various fault gouges. A modified CNS model is further derived from the original CNS model, establishing a direct link between the standard RSF and CNS models. The modified CNS model exhibits virtually identical frictional behaviors to the original CNS, but differs from the standard RSF at large velocity perturbations. Moreover, the linearized stability analysis indicates that the critical stiffness for the modified CNS model is velocity‐dependent. Compared with the standard RSF, the modified CNS model not only explains the velocity dependence of frictional stability transition, but also exhibits a more gradual transition for SSEs with a broader range of stiffness ratios.

Geochemistry & Geophysics↗
DOE OSTI2025

Cracking in polymer substrates for flexible electronic devices and its mitigation

Mechanical reliability plays a critical role in determining the durability of flexible electronic devices because of the significant mechanical stresses they experience during manufacturing and operation. Many such devices are built on sheets comprising stiff transparent-conducting oxide (TCO) electrode films on compliant polymer substrates, and it is generally assumed that the high-toughness polymer substrates do not crack. Contrary to this assumption, here we show extensive cracking in the polymer substrates during bending of a variety of TCO/polymer sheets, and a device example — flexible perovskite solar cells. Such substrate cracking, which compromises the overall mechanical integrity of the entire device, is driven by the amplified stress-intensity factor caused by the elastic mismatch at the film/substrate interface. To mitigate this substrate cracking, an interlayer-engineering approach is designed and experimentally demonstrated. This approach is potentially applicable to myriad flexible electronic devices, with stiff films on compliant substrates, for improving their durability and reliability.

42 ENGINEERING↗
DOE OSTI2021

Ultra-low-density digitally architected carbon with a strutted tube-in-tube structure

Porous materials with engineered stretching-dominated lattice designs, which offer attractive mechanical properties with ultra-light weight and large surface area for wide-ranging applications, have recently achieved near-ideal linear scaling between stiffness and density. Here, rather than optimizing the microlattice topology, we explore a different approach to strengthen low-density structural materials by designing tube-in-tube beam structures. We develop a process to transform fully dense, three-dimensional printed polymeric beams into graphitic carbon hollow tube-in-tube sandwich morphologies, where, similar to grass stems, the inner and outer tubes are connected through a network of struts. Compression tests and computational modelling show that this change in beam morphology dramatically slows down the decrease in stiffness with decreasing density. In situ pillar compression experiments further demonstrate large deformation recovery after 30–50% compression and high specific damping merit index. Lastly, our strutted tube-in-tube design opens up the space and realizes highly desirable high modulus–low density and high modulus–high damping material structures.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evidence for Dirac flat band superconductivity enabled by quantum geometry

In a flat band superconductor, the charge carriers’ group velocity v F is extremely slow. Superconductivity therein is particularly intriguing, being related to the long-standing mysteries of high-temperature superconductors and heavy-fermion systems. Yet the emergence of superconductivity in flat bands would appear paradoxical, as a small v F in the conventional Bardeen–Cooper–Schrieffer theory implies vanishing coherence length, superfluid stiffness and critical current. Here, using twisted bilayer graphene, we explore the profound effect of vanishingly small velocity in a superconducting Dirac flat band system. Using Schwinger-limited non-linear transport studies we demonstrate an extremely slow normal state drift velocity v n ≈ 1,000 m s –1 for filling fraction ν between -1/2 and -3/4 of the moiré superlattice. In the superconducting state, the same velocity limit constitutes a new limiting mechanism for the critical current, analogous to a relativistic superfluid. Importantly, our measurement of superfluid stiffness, which controls the superconductor’s electrodynamic response, shows that it is not dominated by the kinetic energy but instead by the interaction-driven superconducting gap, consistent with recent theories on a quantum geometric contribution. Here we find evidence for small Cooper pairs, characteristic of the Bardeen–Cooper–Schrieffer to Bose–Einstein condensation crossover, with an unprecedented ratio of the superconducting transition temperature to the Fermi temperature exceeding unity and discuss how this arises for ultra-strong coupling superconductivity in ultra-flat Dirac bands.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Electric field stimulates production of highly conductive microbial OmcZ nanowires

Multifunctional living materials are attractive due to their powerful ability to self-repair and replicate. However, most natural materials lack electronic functionality. Here we show that an electric field, applied to electricity-producing Geobacter sulfurreducens biofilms, stimulates production of cytochrome OmcZ nanowires with 1,000-fold higher conductivity (30 S cm -1 ) and threefold higher stiffness (1.5 GPa) than the cytochrome OmcS nanowires that are important in natural environments. Using chemical imaging-based multimodal nanospectroscopy, we correlate protein structure with function and observe pH-induced conformational switching to β-sheets in individual nanowires, which increases their stiffness and conductivity by 100-fold due to enhanced π-stacking of heme groups; this was further confirmed by computational modeling and bulk spectroscopic studies. These nanowires can transduce mechanical and chemical stimuli into electrical signals to perform sensing, synthesis and energy production. Overall, these findings of biologically produced, highly conductive protein nanowires may help to guide the development of seamless, bidirectional interfaces between biological and electronic systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Performance of hybrid Innegra-carbon fiber composites

Abstract In this work material synergy with high stiffness carbon fiber with ductile high strength polypropylene fiber (Innegra S), (referred to as Innegra, herein) have been evaluated in a range of laminate designs. Both woven and discontinuous carbon fiber have been considered. The discontinuous fibers are based on three-dimensional deposition (3DEP) (referred to as 3DEP, herein) carbon fiber preform process. Eleven (11) variants of Innegra-carbon fiber hybrid laminates were investigated for tensile, flexure, compression, in-plane shear and low velocity impact response. The effect of position of Innegra within the laminate was studied and found to influence strength and stiffness properties. In terms of overall trends, Innegra provides upward of 18% improvement in strain (ductility) to the composite and eliminates brittle fracture of carbon fiber. The moduli trends follow the proportionality of Innegra fiber to carbon fiber plies. However, the strength is controlled by the interface between Innegra and carbon fiber. The primary failure mode in tension and compression is via onset of debonding between Innegra and carbon fiber. The 3DEP carbon fiber constituents provided highest values of in-plane shear indicating that three-dimensional (3D) network of carbon fiber provides higher shear resistance. The Innegra intensive variants exhibited superior energy absorption under low velocity impact, at energy levels 15–60 J. This work provides insight for designers to incorporate Innegra and carbon fiber hybrids in composite structures.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Modeling of surface mechanical behaviors of soft elastic solids: theory and examples

Surfaces of soft solids can have significant surface stress, extensional modulus and bending stiffness. Previous theoretical studies have usually examined cases in which both the surface stress and bending stiffness are constant, assuming small deformation. In this work we consider a general formulation in which the surface can support large deformation and carry both surface stresses and surface bending moments. We show that the large deformation theory can be reduced to the classical linear theory (Shuttleworth equation). We obtain exact solutions for problems of an inflated cylindrical shell and bending of a plate with a finite thickness. Our analysis illustrates the different manners in which surface stiffening and surface bending stabilize these structures. We discuss how the complex surface constitutive behaviors affect the stress field of the bulk. Our calculation provides insights into effects of strain-dependent surface stress and surface bending in the large deformation regime, and can be used as a model to implement surface finite elements to study large deformation of complex structures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Machine learning inversion from small-angle scattering for charged polymers

We develop Monte Carlo simulations for uniformly charged polymers and a machine learning algorithm to interpret the intra-polymer structure factor of the charged polymer system, which can be obtained from small-angle scattering experiments. The polymer is modeled as a chain of fixed-length bonds, where the connected bonds are subject to bending energy, and there is also a screened Coulomb potential for charge interaction between all joints. The bending energy is determined by the intrinsic bending stiffness, and the charge interaction depends on the interaction strength and screening length. All three contribute to the stiffness of the polymer chain and lead to longer and larger polymer conformations. The screening length also introduces a second length scale for the polymer besides the bending persistence length. To obtain the inverse mapping from the structure factor to these polymer conformation and energy-related parameters, we generate a large data set of structure factors by running simulations for a wide range of polymer energy parameters. We use principal component analysis to investigate the intra-polymer structure factors and determine the feasibility of the inversion using the nearest neighbor distance. We employ Gaussian process regression to achieve the inverse mapping and extract the characteristic parameters of polymers from the structure factor with low relative error.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Dynamic Characteristics of Multistory Buildings

In order to evaluate unit stresses or to estimate possible damage in multistory buildings from earthquake or ground motion from underground nuclear explosion it is essential to determine how much of the dynamic response at any level is due to various types of freedom. The effects of shear deformation between floors, joint rotation, over-all flexure, and ground compliance are considered. Joint rotation and over-all flexure are evaluated over a wide range of building characteristics with simply determined indices. Further, a period synthesis concept and a pseudo-stiffness procedure are proposed to enable the determination of periods, mode shapes and stiffnesses with consideration of joint rotation, over-all flexure and ground compliance while performing simple labor-saving analyses for assumed rigid-floor shear buildings. The first three modes of vibration are considered in elastic free vibration. The buildings and models are symmetric in plan without torsional coupling.

42 ENGINEERING↗
DOE OSTI2022

A Landau–Devonshire analysis of strain effects on ferroelectric Al 1-x Sc x N

We present a thermodynamic analysis of the recently discovered nitride ferroelectric materials using the classic Landau–Devonshire approach. Electrostrictive and dielectric stiffness coefficients of Al 1-x Sc x N with a wurtzite structure (6 mm) are determined using a free energy density function assuming a hexagonal parent phase (6/mmm), with the first-order phase transition based on the dielectric stiffness relationships. The results of this analysis show that the strain sensitivity of the energy barrier is one order of magnitude larger than that of the spontaneous polarization in these wurtzite ferroelectrics, yet both are less sensitive to strain compared to classic perovskite ferroelectrics. These analysis results reported here explain experimentally reported sensitivity of the coercive field to elastic strain/stress in Al 1-x Sc x N films and would enable further thermodynamic analysis via phase field simulation and related methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

Intermediate time sub-diffusion and stress relaxation in ring polymer melts

The slow dynamics of non-concatenated ring melts remains a frontier problem in polymer science with implications for many soft material environments including cellular biophysics. Here, in this work, we report large-scale simulations of model ring melts that analyze the monomer and center-of-mass (CM) mean square displacements (MSD) and stress relaxation function on intermediate time and length scales. The degree of dynamical slowing down is characterized by the maximally sub-diffusive fractional time scaling exponents. The data span an exceptionally wide range of ring degrees of polymerization and stiffnesses and are not successfully organized based on the classic measure linear chain entanglement, N/N e . Rather, we find that the crossover degree of polymerization, N D , based on ring macromolecular caging that successfully allows master curves to be constructed for the long-time CM self-diffusion constant also collapses these temporal dynamic scaling exponents. Different properties display different exponents and exhibit one or two regimes of linear variation with the logarithm of N D / N . A distinct crossover of the CM-MSD and stress relaxation exponents emerges at sufficiently large N or stiffness that is not found for the monomer MSD, indicating a novel form of dynamic decoupling. This crossover aligns with the predicted critical degree of polymerization for transitioning from a weak to strong caging regime, indicative of activated transport. The latter may reflect the emergence of an intermolecular collective contribution to stress in analogy with dense soft colloidal matter. Suggestions are made for future theoretical work to address the rich patterns of behavior discovered.

Anomalous diffusion↗
DOE OSTI2022

Root angle is controlled by EGT1 in cereal crops employing an antigravitropic mechanism

Root angle in crops represents a key trait for efficient capture of soil resources. Root angle is determined by competing gravitropic versus antigravitropic offset (AGO) mechanisms. Here we report a root angle regulatory gene termed ENHANCED GRAVITROPISM1 ( EGT1 ) that encodes a putative AGO component, whose loss-of-function enhances root gravitropism. Mutations in barley and wheat EGT1 genes confer a striking root phenotype, where every root class adopts a steeper growth angle. EGT1 encodes an F-box and Tubby domain-containing protein that is highly conserved across plant species. Haplotype analysis found that natural allelic variation at the barley EGT1 locus impacts root angle. Gravitropic assays indicated that Hvegt1 roots bend more rapidly than wild-type. Transcript profiling revealed Hvegt1 roots deregulate reactive oxygen species (ROS) homeostasis and cell wall-loosening enzymes and cofactors. ROS imaging shows that Hvegt1 root basal meristem and elongation zone tissues have reduced levels. Atomic force microscopy measurements detected elongating Hvegt1 root cortical cell walls are significantly less stiff than wild-type. In situ analysis identified HvEGT1 is expressed in elongating cortical and stele tissues, which are distinct from known root gravitropic perception and response tissues in the columella and epidermis, respectively. We propose that EGT1 controls root angle by regulating cell wall stiffness in elongating root cortical tissue, counteracting the gravitropic machinery’s known ability to bend the root via its outermost tissues. We conclude that root angle is controlled by EGT1 in cereal crops employing an antigravitropic mechanism.

59 BASIC BIOLOGICAL SCIENCES↗