Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution chemistry”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Isotopically labelled inorganic carbon delivered to algalcultures via bubbler bottle

This protocol describes a method for delivering labelled inorganic carbon as 13 CO 2 to algal cultures by bubbling air through a solution of H 13 CO 3 - , and then into the culture. We developed this method to deliver label to cultures grown under continuous bubbling with air, without the use of 13 CO 2 labelled gas and the necessary equipment to mix labelled gas with air at near-atmospheric levels. Bubbling precludes the more common approach of adding H 13 CO 3 - label directly to the media, because dissolved HCO 3 - is in equilibrium with atmospheric CO 2 . Thus, excess HCO 3 - added to a solution will leave the solution as CO 2 gas as it equilibrates. Bubbling rapidly accelerates this equilibration which is typically diffusion limited. The method described here takes advantage of this aspect of carbonate chemistry, and uses a solution of H 13 CO 3 - —which is less expensive and more convenient than 13 CO 2 gas—to generate a flux of 13 CO 2 that can be bubbled into a culture.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS2000

Aerothermodynamic Analysis of Stardust Sample Return Capsule with Coupled Radiation and Ablation

An aerothermodynamic analysis of the forebody aeroshell of the Stardust Sample Return Capsule is carried out by using the axisymmetric viscous shock-layer equations with and without fully coupled radiation and ablation. Formulation of the viscous shock-layer equations with shoulder radius as the length scale and implementation of the Vigneron pressure condition allow resolution of the flowfield over the shoulder. With a predominantly supersonic outflow over the shoulder, a globally iterated solution or viscous shock-layer equations can be obtained. The stagnation-point results are obtained along a specified trajectory, whereas detailed calculations along the body are provided at the peak-heating point. The equilibrium calculations with ablation injection are the focus of the present study because of the lack of a general chemical nonequilibrium analysis that accounts for both surface and flowfield effect. The equilibrium calculations also provide a simple way to conserve surface (and flowfield) elemental composition for the current small ablation injection rates, where the surface elemental composition is a mixture of freestream and ablator elements. Therefore, the coupled laminar and turbulent flow solutions with radiation and ablation are obtained by using the equilibrium flow chemistry, whereas a nonequilibrium chemistry model is used for solutions without ablation and turbulence. Various computed results are compared with those obtained by the other researchers.

Gupta, Roop N.↗
DOE OSTI2022

Comparing measurement of limiting current in block copolymer electrolytes as a function of salt concentration with theoretical predictions

Optimizing electrolyte performance is crucial for the widespread adoption of electrochemical energy storage. We demonstrate that limiting current provides a robust criterion for determining the optimum electrolyte. Experiments were conducted on rigid block copolymer electrolytes comprising mixtures of polystyrene-block-poly(ethylene oxide) copolymer (SEO) and lithium bis(trifluoromethanesulfonyl) imide salt (LiTFSI) over a salt concentration range from r av = 0.04 to r av = 0.20 (r av is the molar ratio of lithium ions to ethylene oxide). Here we show that the maximum limiting current density is 4.3 mA cm –2 at r av = 0.12. The dependence of limiting current on salt concentration is in good agreement with predictions from Newman's concentrated solution theory with no adjustable parameters.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Multidisciplinary Analysis of a Hypersonic Engine

This paper describes implementation of a technique used to obtain a high fidelity fluid-thermal-structural solution of a combined cycle engine at its scram design point. Single-discipline simulations are insufficient here since interactions from other disciplines are significant. Using off-the-shelf, validated solvers for the fluid, chemistry, thermal, and structural solutions, this approach couples together their results to obtain consistent solutions.

Stewart, M. E. M.↗
NASA NTRS1990

Characteristic-based algorithms for flows in thermo-chemical nonequilibrium

A generalized finite-rate chemistry algorithm with Steger-Warming, Van Leer, and Roe characteristic-based flux splittings is presented in three-dimensional generalized coordinates for the Navier-Stokes equations. Attention is placed on convergence to steady-state solutions with fully coupled chemistry. Time integration schemes including explicit m-stage Runge-Kutta, implicit approximate-factorization, relaxation and LU decomposition are investigated and compared in terms of residual reduction per unit of CPU time. Practical issues such as code vectorization and memory usage on modern supercomputers are discussed.

Walters, Robert W.↗
DOE OSTI2025

Radiation Chemistry and the Nuclear Fuel Cycle

This presentation will give a general overview of radiation chemistry in the nuclear fuel cycle, and outline some relevant work being conducted in the INL Radiochemical Separations and Radiation Science Department. This will include a discussion of using multiscale modeling to study plutonium radiation chemistry in nitric acid solutions. (Presentation cancelled)

38 - RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCL↗
DOE OSTI2024

Stoichiometric Lanthanide Compounds with Diglycolamides: A Synthetic Approach toward Understanding Rare-Earth Speciation in Solution

A fundamental understanding of coordination chemistry across the lanthanide series is essential for explaining the chemical behavior of rare-earth metals in complex liquid–liquid extraction processes. Probing the exact bonding between the extractant and the metal is sometimes done through the synthesis of solid-state compounds that can serve as models for metal speciation in solution. In the case of diglycolamide (DGA), a commonly used neutral diamide extractant, extensive studies identify the stepwise formation of 1:1 [Ln(DGA)(H 2 O) 6 ] 3+ , 1:2 [Ln(DGA) 2 (H 2 O) 3 ] 3+ , and 1:3 [Ln(DGA) 3 ] 3+ complexes in solution. The crystallographic reports, however, exclusively show a 1:3 [Ln(DGA) 3 ] 3+ moiety in the solid state, while the structures of 1:1 and 1:2 complexes are yet to be isolated and comprehensively studied. In this work, we report the synthesis and characterization of three new families of stoichiometric N,N,N′,N’ -tetramethyldiglycolamide (TMDGA) compounds: [Ln(TMDGA)(H 2 O) 5 Cl]Cl 2 ·2H 2 O, [Ln(TMDGA) 2 (H 2 O) 3 ]Cl 3 ·3H 2 O, and [Ln(TMDGA) 3 ]Cl 3 ·7H 2 O, where Ln = Nd, Eu, Gd, with Ln:TMDGA ratios of 1:1, 1:2, and 1:3, respectively. Further, the compounds have been analyzed using vibrational spectroscopy (both Raman and FT-IR), as well as variable temperature fluorescence spectroscopy. A spectrophotometric titration of Eu(III) was performed to confirm the presence of the [Eu(TMDGA) n ] 3+ ( n = 1, 2, and 3) species in solution and to compare the individual solid-state emission spectra to their respective analogues in solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Liquid-to-gas transfer of sodium in a liquid cathode glow discharge

Abstract Plasma-liquid interactions have been extensively studied with a focus on the transport of reactive species from the plasma to the liquid phase and their induced liquid phase chemistry and resulting applications. While solute transfer from the liquid to the gas phase in plasmas has been widely used in analytical chemistry, the underlying processes remain relatively unexplored. We report spatially and temporally resolved absolute density measurements of sodium in a plasma with a NaCl solution cathode using two-photon absorption laser induced fluorescence (TaLIF). The observed non-linear increase in sodium density with solution conductivity is shown to correlate with droplet generation as visualized by Mie scattering. The findings are explained by droplet generation by electrospray induced by Taylor cone formation as underpinning mechanism for the introduction of sodium in the plasma. An analytical sheath model combined with a scaling law shows an increase in electric field force with solution conductivity that is consistent with the observed non-linear increase in sodium density in the plasma with solution conductivity.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1986

Time-dependent solution for axisymmetric flow over a blunt body with ideal gas, CF4, or equilibrium air chemistry

A time-asymptotic method has been used to obtain steady-flow solutions for axisymmetric inviscid flow over several blunt bodies including spheres, paraboloids, ellipsoids, and spherically blunted cones. Comparisons with experimental data and results of other computational methods have demonstrated that accurate solutions can be obtained using this approach. The method should prove useful as an analysis tool for comparing with experimental data and for making engineering calculations for blunt reentry vehicles.

Hamilton, H. H., II↗
DOE OSTI2021

Solution and Interface Structure and Dynamics in Geochemistry: Gateway to Link Elementary Processes to Mineral Nucleation and Growth

Our understanding of the process of mineral nucleation is starting to evolve from the solely thermodynamical aspects in classical nucleation theory toward a mechanistic study of reactions influenced by solvation structures of ions and their dynamics. A knowledge of how these atomic and molecular interactions respond to changing solution composition and/or the nature of an interface will form a fundamental foundation to understand rate-limiting reactions and processes for nucleation and growth. Here, we review recent advances from multidisciplinary experimental and computational approaches of the structure and dynamics of aqueous solutions and mineral–liquid interfaces that will influence rates of nucleation (and growth behavior) both homogeneously in aqueous solutions and heterogeneously at mineral–liquid interfaces. Furthermore, these processes include structure (and extent) of solute clustering, solvent degrees of freedom, and the presence of noninnocent charge-balancing ions, all of which can drive the selectivity and exert control over nucleation mechanisms. Similar controlling reactions can also occur at interfaces with the added complexities of how solute ions interact with and assemble on surface sites and use different mechanisms from bulk solutes, such as lateral solvent exchanges between distinct surface sites. To gain a predictive understanding of nucleation chemistry, we emphasize several key knowledge gaps that will need to be addressed in this field and highlight the importance of combining computations and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A Solution to Asymmetric Marangoni GTA Weld Behavior in a Dissimilar Chemistry Stainless Steel Joint [Slides]

Asymmetric and irregular weld morphology is an issue with the 9516 shipping container GTA weld. Observation of the weld puddle and cross sections showed the weld was biased toward the body side of the joint. This issue is attributed to a difference in the sulfur content and Marangoni fluid flow characteristics of the lid (150 ppm) and body (10 ppm) components of the weld joint. An additional contributing factor in this issue is the large difference in mass between the ½” thick lid and 1/8” thick body. A solution was developed comprised of a preliminary partial penetration weave pass across the joint intended to homogenize the sulfur content prior to the full penetration pass.

42 ENGINEERING↗
DOE OSTI2021

A priori examination of reduced chemistry models derived from canonical stirred reactors using three-dimensional direct numerical simulation datasets

Data-driven approaches to construct reduced chemical kinetic models, that rely heavily on thermo-chemical datasets with full chemical kinetics, have been gaining popularity. Datasets from direct numerical simulations (DNS) under three-dimensional (3-D) realistic turbulent flow conditions are desirable but limited to carefully designed parametric conditions due to the computational cost. Constructing datasets from a large ensemble of zero-dimensional stirred reactors like perfectly stirred reactor (PSR) and partially stirred reactor (PaSR) is a computationally efficient solution to consider the turbulence-chemistry interactions and cover a broad range of parametric conditions. In this paper, we derive reduced chemistry models from solutions of a large number of PSR and PaSR reactors using autoencoder (AE) neural networks and principal component analysis (PCA), and conduct a priori examination of the reduced models in three temporally evolving 3-D DNS jet flames featuring local extinction and re-ignition. The results show that the reduced models derived from PaSR datasets, i.e., AE-PaSR and PCA-PaSR, generally show significant improvement over the ones derived from PSR datasets. Among all the reduced models, AE-PaSR shows the best agreement with DNS results on the reconstruction accuracy and the representation of temporally evolving local extinction and re-ignition events.

Zhang, Pei↗
DOE OSTI2023

Cations impact radical reaction dynamics in concentrated multicomponent aqueous solutions

Ultraviolet (UV) photolysis of nitrite ions (NO 2 – ) in aqueous solutions produces a suite of radicals, viz., NO · , O – , · OH, and · NO 2 . The O – and NO · radicals are initially formed from the dissociation of photoexcited NO 2 – . The O – radical undergoes reversible proton transfer with water to generate · OH. Both · OH and O – oxidize the NO 2 – to · NO 2 radicals. The reactions of · OH occur at solution diffusion limits, which are influenced by the nature of the dissolved cations and anions. Here, we systematically varied the alkali metal cation, spanning the range from strongly to weakly hydrating ions, and measured the production of NO · , · OH, and · NO 2 radicals during UV photolysis of alkaline nitrite solutions using electron paramagnetic resonance spectroscopy with nitromethane spin trapping. Comparing the data for the different alkali cations revealed that the nature of the cation had a significant effect on production of all three radical species. Radical production was inhibited in solutions with high charge density cations, e.g., lithium, and promoted in solutions containing low charge density cations, e.g., cesium. Through complementary investigations with multinuclear single pulse direct excitation nuclear magnetic resonance (NMR) spectroscopy and pulsed field gradient NMR diffusometry, cation-controlled solution structures and extent of NO 2 – solvation were determined to alter the initial yields of · NO and · OH radicals as well as alter the reactivity of NO 2 – toward · OH, impacting the production of · NO 2 . The implications of these results for the retrieval and processing of low-water, highly alkaline solutions that comprise legacy radioactive waste are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Elucidating the Role of Halides and Iron during Radiolysis-Driven Oxidative Etching of Gold Nanocrystals Using Liquid Cell Transmission Electron Microscopy and Pulse Radiolysis

Graphene liquid cell transmission electron microscopy (TEM) has enabled the observation of a variety of nanoscale transformations. Yet understanding the chemistry of the liquid cell solution and its impact on the observed transformations remains an important step toward translating insights from liquid cell TEM to benchtop chemistry. Gold nanocrystal etching can be used as a model system to probe the reactivity of the solution. FeCl 3 has been widely used to promote gold oxidation in bulk and liquid cell TEM studies, but the roles of the halide and iron species have not been fully elucidated. In this work, we observed the etching trajectories of gold nanocrystals in different iron halide solutions. We observed an increase in gold nanocrystal etch rate going from Cl - - to Br - - to I - -containing solutions. Furthermore, this is consistent with a mechanism in which the dominant role of halides is as complexation agents for oxidized gold species. Additionally, the mechanism through which FeCl 3 induces etching in liquid cell TEM remains unclear. Ground-state bleaching of the Fe(III) absorption band observed through pulse radiolysis indicates that iron may react with Cl 2 · - radicals to form an oxidized transient species under irradiation. Complete active space self-consistent field (CASSCF) calculations indicate that the FeCl 3 complex is oxidized to an Fe species with an OH radical ligand. Together our data indicate that an oxidized Fe species may be the active oxidant, while halides modulate the etch rate by tuning the reduction potential of gold nanocrystals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2002

Quench Crack Behavior of Nickel-base Disk Superalloys

There is a need to increase the temperature capability of superalloy turbine disks to allow higher operating temperatures in advanced aircraft engines. When modifying processing and chemistry of disk alloys to achieve this capability, it is important to preserve the ability to use rapid cooling during supersolvus heat treatments to achieve coarse grain, fine gamma prime microstructures. An important step in this effort is an understanding of the key variables controlling the cracking tendencies of nickel-base disk alloys during quenching from supersolvus heat treatments. The objective of this study was to investigate the quench cracking tendencies of several advanced disk superalloys during simulated heat treatments. Miniature disk specimens were rapidly quenched after solution heat treatments. The responses and failure modes were compared and related to the quench cracking tendencies of actual disk forgings. Cracking along grain boundaries was generally observed to be operative. For the alloys examined in this study, the solution temperature not alloy chemistry was found to be the primary factor controlling quench cracking. Alloys with high solvus temperatures show greater tendency for quench cracking.

Gayda, John↗
DOE OSTI2024

Design of a high-temperature cell for cobalt-60 irradiations of aqueous solutions with in situ UV–visible spectroscopy

To understand the speciation of solutes in aqueous solutions in high temperature radiation environments, we report the design and fabrication of a custom-built, high temperature (≤300 °C) titanium irradiation cell with in situ optical spectroscopy capabilities, as afforded by coupled fiber optic cables. The wetted surfaces of the 8-inch tall cylindrical cell with 3.5 in. diameter are entirely made of titanium, sapphire, and gold, which are chemically and radiolytically inert. The initial benchmarking results are reported, including the baseline spectrum of deionized water as a function of temperature, the stability of a spectrum over 4 h at 100 °C, and an irradiated Fricke dosimetry solution under ambient irradiator temperature conditions (27.0 ± 0.5 °C). Further, the average gamma radiation dose rate in the cell in its current configuration is 26.1 ± 1.3 Gy min -1 . This cell has application in studying several processes throughout the nuclear fuel cycle, including the reactor coolant behavior.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2021

Sub-picosecond Production of Solute Radical Cations in Tetrahydrofuran after Radiolysis

Ultrafast hole transfer from solvent radical cations produced by radiolysis with ~10 ps, 9 MeV electron pulses to solutes was investigated in tetrahydrofuran (THF). Because of rapid fragmentation of initially produced THF +• , solute radical cations are not expected and have not previously been reported. Using 9,9-Dihexyl-2,7-dibromofluorene (Br 2 F) at 5 to 1000 mM, Br 2 F +• was observed with radiation chemical yields up to G = 2.23 / 100 eV absorbed. While more than half of this was the result of direct solute ionization, the results highlight the importance of capture of holes from THF +• prior to solvation and fragmentation. The observed data show a time-resolution limited (15 ps) rise in transient absorption of Br 2 F +• , identical in form to reports of pre-solvated or dry electron capture in water and a few organic liquids, including THF. The results were thus interpreted with a similar formalism, finding C 37 = 1.7 M, the concentration at which 37% of holes escape capture. The yield of solvent hole capture can be accounted for by the formation of solvent holes adjacent to solute molecules reacting faster than they can fragment, however mechanisms such as delocalized holes or rapid hopping may play a role. Finally, low temperature results find over two times more capture, supporting the speculation that if THF +• was longer lived, the yield of capture in under 15 ps would have been at least 2x larger at 1 M Br 2 F, possibly capturing nearly all available holes from the solvent.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2024

An ion specific continuum model on ionic surfactant's binary phase diagram in aqueous solution

Here, a continuum aggregation model is proposed to account for specific ion effects, enabling accurate phase diagrams calculations for the micellar, cylindrical and lamellar aggregates of sodium/potassium carboxylate surfactants in aqueous solution across a range of temperatures. Three groups of concentrations at distinctive temperatures are fitted to build empirical temperature dependence given the limited availability of relevant experimental measurements. The specific ion effects are manifested in the aggregates' surface tension as well as in the distributions of counter-ions' concentrations in the vicinity of the aggregates. The aggregates' geometric sizes are well-reproduced. The differential evolution algorithm is applied to address boundary conditions of the electrostatic potential, aggregate size optimization as well as the equilibrium of monomers transferring between the aggregate and aqueous region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗