Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “slope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Toward Lithium Recovery Using Modular (and Membraneless) Phase Separation and Extraction (MPSE) Technology with Ionic Liquid (IL) Solvents: Effect of Coatings

In this work, a single-channel slope-plate Modular and Membrane-less Phase Separation and Extraction (MPSE) device was fabricated using 3D printing. The slope-plate was designed with an insertable glass slide to enable surface modification with coatings. Self-assembled monolayers (SAMs) and perfluoropolyether (Zdol) coatings were applied to tailor surface wettability and enhance phase separation. Using a model biphasic system of water and hexadecane, both coatings significantly improved the separation efficiency compared to the uncoated device by promoting selective wetting. Building on these results, lithium extraction from a simulated saline solution was investigated using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][NTf₂]) as the ionic liquid (IL) extractant. The IL effectively extracted Li⁺ from the aqueous phase in bulk extraction, demonstrating its potential for lithium recovery. However, the low interfacial tension between the IL and aqueous phases posed challenges for phase separation. The application of SAM and Zdol coatings effectively mitigated this issue. Overall, integrating tailored surface chemistry with the slope-plate MPSE design shows great promise as an efficient and scalable platform for studying liquid–liquid separation and optimizing ionic liquid–based extraction processes for lithium recovery from saline sources.

3D printing↗
DOE OSTI2020

Exploring topography-based methods for downscaling subgrid precipitation for use in Earth System Models

Topography exerts major control on land surface processes. To improve representation of topographic impacts on land surface processes, a new topography-based subgrid structure has been introduced to the Energy Exascale Earth System Model to represent the subgrid heterogeneity of surface elevation. To take advantage of the new subgrid structure for improving land surface modeling, this study explores four variations of topography-based methods for downscaling grid precipitation to the corresponding subgrids. In the first three methods, the deviation of the subgrid precipitation from the grid’s is equal to the grid precipitation multiplied by the ratio of the elevation difference between the subgrid and grid mean to a specified elevation equals to the grid elevation, the difference between the maximum and minimum subgrid elevation, and the maximum subgrid elevation, respectively. The second method limits the ratio to 0.5 to avoid extreme values on mountains and the third method accounts for the slope effect. The fourth method is similar to the third method except that the Froude Number is used to limit the numerator in a blocking regime of the ambient flow. The downscaled precipitation is evaluated using the PRISM precipitation data over the U.S. using statistical metrics. Results show that by accounting for topographic slope besides elevation, the third and fourth methods show clear advantages over the first and second methods. Furthermore, introducing the Froude Number in the fourth method improves downscaling skill and shows consistent advantages over the third method in areas with larger subgrid heterogeneity across different grids sizes.

Tesfa, Teklu K.↗
DOE OSTI2021

Influence of the Kuroshio Intrusion on Deep Flow Intraseasonal Variability in the Northern South China Sea

Abstract Interactions between the open ocean and marginal seas have been suggested to be critical to the redistribution and dissipation of global energy. Here, we propose a mechanism for the upper open ocean influencing the deep flow in marginal seas that hinges on the formation and propagation of topographic Rossby waves (TRWs). Observations and high‐resolution simulations suggest substantial intraseasonal variability with periods of 5–60 days associated with the deep flow over continental slopes of the northern South China Sea (NSCS). These fluctuations generally account for over 40% of the total deep kinetic energy variability and the number can reach 70% over the slopes to the west of the Luzon Strait, southwest of the Dongsha Islands, and northeast of the Xisha Islands. By examining the spatiotemporal features of the fluctuations, we demonstrate that the intraseasonal variability of the deep flow in the NSCS is closely associated with TRWs. Using a recently developed multiscale energetics analysis in combination with a ray tracing model, we show that the energy sources of TRWs can be traced back to the east of the Dongsha Islands, where the Kuroshio intrusion and related eddies energize the TRWs primarily through pressure work. These waves propagate westward across the NSCS and drive the intraseasonal variability of the deep flow over continental slopes. Our findings highlight an energy pathway from the open ocean western boundary current to the abyssal marginal sea that could modulate regional circulation as well as exchanges between major ocean basins.

Quan, Qi↗
DOE OSTI2022

Spatial Trends and Drivers of Bedload and Suspended Sediment Fluxes in Global Rivers

Abstract Bedload is notoriously challenging to measure and model; its dynamics, therefore, remains largely unknown in most fluvial systems worldwide. We present results from a global scale bedload flux model as part of the WBMsed modeling framework that well predict the distribution of water discharge, suspended sediment and bedload. The sensitivity of bedload predictions to river slope, particle size, discharge, river width, and suspended sediment were analyzed, showing the model to be most responsive to spatial dynamics in river discharge and slope. The relationship between bedload and total sediment flux is analyzed globally, and for representative longitudinal river profiles (Amazon, Mississippi, and Lena Rivers). The results show that while the proportion of bedload decreases from headwaters to the coasts, there is considerable variability between basins and along river corridors. The topographic and hydrological longitudinal profiles of rivers are shown to be the key drivers of bedload trends, with fluctuations in slope controlling its more local dynamics. Estimates of water and sediment fluxes to global oceans from 2,067 largest river outlets (draining 67% of the global continental area) are provided. Estimated water discharge at 30,579 km 3 /y corresponds well to past estimates; however, sediment flux is higher. Total global particulate load of 17.8 Gt/y is delivered to global oceans, 14.8 Gt/y as washload, 1.1 Gt/y as bedload, and 2.6 Gt/y as suspended bed material. The largest 25 rivers are predicted to transport more than half of the total sediment flux to global oceans.

Cohen, Sagy↗
DOE OSTI2025

Revealing the Moon's Taurus‐Littrow Landslide via Integrated Analysis of Pristine Apollo 17 Soil Core 73001/2

The “light mantle” deposit at the base of South Massif in the Moon's Taurus‐Littrow Valley was a primary science target for the Apollo 17 exploration. The possibility that it was a landslide triggered by ejecta from Tycho Crater is critical for establishing the age of Tycho and constraining recent lunar impact chronology; however, the mechanism of emplacement of the deposit has recently been questioned. The newly opened 73001/73002 double drive tube from Station 3 sampled 70.6 cm deep into the regolith and represents the first stratigraphic section of an extraterrestrial landslide deposit returned to Earth. Here we provide an overview of the stratigraphy of the 73001/73002 core based on top to bottom variations revealed by coordinated laboratory analyses and explore constraints on the emplacement of the light mantle deposit. Briefly, the upper ∼10 cm of 73002 contains a disturbed zone from space weathering and emplacement of ejecta from a nearby crater that excavated and ejected basaltic material. Below 10 cm is a nearly uniform unit of immature regolith. These data support a single event for the emplacement of the deposit at this location, followed by weathering and mixing of materials from nearby crater ejecta in the upper 10 cm. Slight variations in chemistry and clast components may reflect the relative stratigraphy of the South Massif slope, with material toward the bottom of 73001 originating from lower slopes and material from higher up in the core representing regolith from higher up the South Massif slopes.

58 GEOSCIENCES↗
DOE OSTI2026

Spectral Properties and Energy Injection in Mercury's Magnetotail Current Sheet

Mercury's magnetotail hosts a thin and highly dynamic current sheet (CS), where magnetic reconnection and strong fluctuations frequently occur. Here, we statistically analyze magnetic field power spectra across 370 magnetotail CSs observed by MESSENGER. About 20% of the events are quasi-laminar, showing single power-law spectra, whereas ∼80% are turbulent, exhibiting a spectral break separating inertial and kinetic ranges. A dawn–dusk asymmetry is identified: inertial-range slopes are systematically shallower on the dawnside, whereas kinetic-range slopes are steeper, indicating more developed turbulence there, consistent with the higher occurrence of reconnection-related processes on the dawnside. Component analysis shows that the transverse components, orthogonal to the tail-aligned principal field ( B X ), display shallow slopes near −1 in the inertial range, suggesting energy injection at ion scales rather than a classical inertial range. These results demonstrate that Mercury's unique plasma environment fundamentally reshapes the initiation of turbulence and the redistribution of energy in the magnetotail.

Mercury↗
DOE OSTI2025

Representing Fine‐Scale Topographic Effects on Surface Radiation Balance in Hyper‐Resolution Land Surface Models

Land surface models are increasingly used to simulate land surface processes at hyper-spatial resolutions (e.g., ∼1 km). As model resolution increases, grid-scale topographic effects on surface radiation fluxes and their interactions between adjacent grids become more pronounced. However, current land surface models routinely neglect the fine-scale topographic effects on surface radiation balance. This study developed physically-based and computationally-efficient parameterizations (fineTOP) that explicitly resolve fine-scale topographic effects on downward shortwave and longwave radiation as well as land surface radiative properties. The newly developed parameterizations were implemented and tested in the Energy Exascale Earth System Model (E3SM) Land Model (ELM). Multi-decadal km-resolution ELM simulations over the California Sierra Nevada show that fine-scale topography significantly impacts the surface energy balance and snow processes across seasons. Slope determines the magnitude of topographic effects, while aspect controls their sign. For slopes larger than 30°, topography-induced change in annual surface temperature can be as large as 3.3 K. Regionally, the mean value and standard deviation of topography-induced changes in annual surface temperature are −0.22 ± 0.38 K and +0.25 ± 0.37 K over north-facing and south-facing slopes, respectively. Topography-induced changes in surface radiative properties account for 3.5% ± 13.8% of total topographic effects on annual net radiation. With fineTOP, ELM captures the aspect-dependence of snow cover fraction, snow water equivalent, and land surface temperature found in MODIS satellite observations and a snow reanalysis data set, while the default ELM fails to capture this phenomenon. The enhanced capability to represent fine-scale topographic effects on surface radiation balance can be used to advance understanding of the role of fine-scale topography in land surface processes and land-atmosphere interactions over mountainous regions.

Hao, Dalei [Pacific Northwest National Laboratory ↗
DOE OSTI2025

Isotope-dependent Tafel analysis probes proton transfer kinetics during electrocatalytic water splitting

Proton transfer plays an important role in both hydrogen and oxygen evolution reactions during electrocatalytic water splitting to produce green hydrogen. However, directly adapting the conventional proton/deuterium kinetic isotope effect to study proton transfer in heterogeneous electrocatalytic processes is challenging. Here we propose using the shift in the Tafel slope between protic and deuteric electrolytes, or the Tafel slope isotope effect, as an effective probe of proton transfer characteristics. Comparison of the Tafel slope isotope effect for diverse hydrogen and oxygen evolution reaction electrocatalysts in different pH environments reveals that proton transfer is both pH and structure dependent. Using ruthenium oxide as an example, we show that local structure modification can change the rate-determining step from an electrochemical, concerted proton–electron transfer step to a chemical step and improve the oxygen evolution activity in acid. The isotope-dependent Tafel analysis will facilitate a better understanding of the proton transfer behaviours during electrocatalytic processes and provide guidance for designing efficient electrocatalysts.

Chemistry↗
DOE OSTI2023

Kibble–Zurek mechanism of Ising domains

The formation of topological defects after a symmetry-breaking phase transition is an overarching phenomenon that encodes the underlying dynamics. The Kibble-Zurek mechanism (KZM) describes these non-equilibrium dynamics of second-order phase transitions and predicts a power-law relationship between the cooling rates and the density of topological defects. It has been verified as a successful model in a wide variety of physical systems, including structure formation in the early Universe and condensed-matter materials. However, it is uncertain if the KZM mechanism is also valid for topologically trivial Ising domains, one of the most common and fundamental types of domain in condensed-matter systems. Here we show that the cooling rate dependence of Ising domain density follows the KZM power law in two different three-dimensional structural Ising domains: ferro-rotation domains in NiTiO 3 and polar domains in BiTeI. However, although the KZM slope of NiTiO 3 agrees with the prediction of the 3D Ising model, the KZM slope of BiTeI exceeds the theoretical limit, providing an example of steepening KZM slope with long-range dipolar interactions. Finally, our results demonstrate the validity of KZM for Ising domains and reveal an enhancement of the power-law exponent for transitions of non-topological quantities with long-range interactions. The Kibble-Zurek mechanism is shown to apply to structural Ising domains in three-dimensional materials. Long-range interactions modify the critical exponents away from theoretical predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Internal gravity waves in massive stars: II. Frequency analysis across stellar mass

Stars that are over 1.6 solar masses are generally known to possess convective cores and radiative envelopes, which allows for the propagation of outwardly travelling internal gravity waves (IGWs). Here, we study the generation and propagation of IGWs in such stars using two-dimensional, fully non-linear hydrodynamical simulations with realistic stellar reference states from the one-dimensional stellar evolution code, Modules for Stellar Astrophysics. Compared to previous similar works, this study utilises radius-dependent thermal diffusivity profiles for five different stellar masses at the middle of the main sequence: 3 M ⊙ , 5 M ⊙ , 7 M ⊙ , 10 M ⊙ , and 13 M ⊙ . From the simulations, we find that the surface perturbations are larger for higher masses, but no noticeable trends are observed for the frequency slopes with different stellar masses. The slopes are also similar to the results from previous works. We compared our simulation results with stellar photometric data from a recent survey and we found that for frequency intervals above 8 μHz, there is a good agreement between the temperature frequency slopes from the simulations and the surface brightness variations of these observed stars. This indicates that the brightness variations are caused by core-generated IGWs.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

A sample of dust attenuation laws for Dark Energy Survey supernova host galaxies

Type Ia supernovae (SNe Ia) are useful distance indicators in cosmology, provided their luminosity is standardized by applying empirical corrections based on light-curve properties. One factor behind these corrections is dust extinction, which is accounted for in the color–luminosity relation of the standardization. This relation is usually assumed to be universal, which can potentially introduce systematics into the standardization. The “mass step” observed for SN Ia Hubble residuals has been suggested as one such systematic. We seek to obtain a more complete view of dust attenuation properties for a sample of 162 SN Ia host galaxies and to probe their link to the mass step. We inferred attenuation laws toward hosts from both global and local (4 kpc) Dark Energy Survey photometry and composite stellar population model fits. We recovered a relation between the optical depth and the attenuation slope, best explained by differing star-to-dust geometry for different galaxy orientations, which is significantly different from the optical depth and extinction slope relation observed directly for SNe. We obtain a large variation of attenuation slopes and confirm these change with host properties, such as the stellar mass and age, meaning a universal SN Ia correction should ideally not be assumed. Analyzing the cosmological standardization, we find evidence for a mass step and a two-dimensional “dust step”, both more pronounced for red SNe. Although comparable, the two steps are not found to be completely analogous. We conclude that host galaxy dust data cannot fully account for the mass step, using either an alternative SN standardization with extinction proxied by host attenuation or a dust-step approach.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Electropolishing-induced topographic defects in niobium: insights and implications for superconducting radio frequency applications

Electropolishing (EP) is the premier surface preparation method for high-Q, high-gradient superconducting RF cavities made of Nb. This leaves behind an apparently smooth surface, yet the achievable peak magnetic fields fall well below the superheating field of Nb, in most cases. Here, in this work, the ultimate surface finish of EP was investigated by studying its effect on highly polished Nb samples. EP introduces high slope angle sloped-steps at grain boundaries. The magnetic field enhancement and superheating field suppression factors associated with such a geometry are calculated in the London theory. Despite the by-eye smoothness of electropolished Nb, such defects compromise the stability of the low-loss Meissner state, likely limiting the achievable peak accelerating fields in superconducting RF cavities. Finally, the impact of surface roughness on impurity diffusion is investigated which can link surface roughness to the effectiveness of heat treatments like low-temperature baking or nitrogen infusion in the vortex nucleation or hydride hypotheses. Surface roughness tends to decrease the effective dose of impurities as a result of the expansion of impurities into regions with greater internal angle. The effective dose of impurities can be protected by minimizing slope angles and step heights, ensuring uniformity.

Hryhorenko, Oleksandr [Thomas Jefferson National A↗
DOE OSTI2023

Signal processing to reduce dark noise impact in precision timing

We introduce a technique to mitigate the effects of low frequency noise on precision timing. The example of Dark Count Noise Rate (DCR) in Silicon Photomultipliers (SiPMs) is emphasized. This technique exploits the correlation between time shifts on the leading edge of a signal and the residual slope of the baseline (due to noise) which remains after baseline subtraction. In fast timing applications (such as for Time-of-flight particle ID) the signal arrival time is typically captured on the signal leading edge. The signal risetime is often fixed by the physics of the sensor and input circuit. Then accurate pulse timing can be achieved by correcting a leading edge threshold time (depending on a slope proportional to both the Amplitude and the risetime) to a “constant fraction” time. This compensation for time walk due to amplitude fluctuations breaks down once we introduce interference from low frequency noise on the leading edge. In this paper we demonstrate that an additional measurement of the slope at threshold can be used to correct for this noise jitter.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Methane emission hotspots in a boreal forest-fen mosaic potentially linked to deep taliks

Permafrost thaw is transforming boreal forests into mosaics of wetlands and drier uplands. Topographic controls on hydrological and ecological conditions impact methane (CH 4 ) fluxes, contributing to uncertainty in local and regional CH 4 budgets and underlying drivers. The objective of this study was to explore CH 4 fluxes and their drivers in a transitioning boreal forest-fen ecosystem (Goldstream Valley, Alaska, USA). This landscape is characterized by thawing discontinuous permafrost and heterogeneous mosaics of fens, collapse-scar channels, and small mounds of permafrost soils. From a survey in July 2021, observed chamber CH4 fluxes included fen areas with intermediate to very high emissions (29.8–635.3 mg CH 4 m −2 d −1 ), clustered locations with CH 4 uptake (−2.11 to −0.7 mg CH 4 m −2 d −1 ), and three anomalous emission hotspots (342.4–772.4 mg CH 4 m −2 d −1 ) that were located near samples with lower emissions. Some surface and near-surface variables partially explained the spatial variation in CH 4 flux. Log-transformed CH 4 flux had a positive linear relationship with soil moisture at 20 cm depth ( R 2 = 0.31, p -value < 1e-5) and negative linear relationships with microtopography ( R 2 = 0.13, p -value < 0.006) and slope ( R 2 = 0.28, p -value < 2e-5). Methane emissions generally occurred in flat, wet, graminoid-dominated fens, whereas CH 4 uptake occurred on permafrost mounds dominated by feather mosses and woody vegetation. However, the CH 4 hotspots occurred on drier, slightly sloped locations with low or undetectable near-surface methanogen abundance, suggesting that CH 4 was produced in deeper soils. When the hotspot samples were omitted, log-transformed CH 4 flux had a positive linear relationship with near-surface methanogen abundance ( R 2 = 0.29, p -value = 0.0023), and stronger linear relationships with soil moisture, slope, and soil macronutrient concentrations. Our findings suggest that some CH 4 emission hotspots could arise from CH 4 in deep taliks. The inference that methanogenesis occurs in deep taliks was strengthened by the identification of intrapermafrost taliks across the study area using low-frequency geophysical induction. This study assesses surface spatial heterogeneity in the context of subsurface permafrost conditions and highlights the complexity of CH 4 flux patterns in transitioning forest-wetland ecosystems. To better inform regional CH 4 budgets, further research is needed to understand the spatial distribution of terrestrial CH 4 hotspots and to resolve their surface, near-surface, and subsurface drivers.

boreal↗
DOE OSTI2020

Two-dimensional simulations of internal gravity waves in the radiation zones of intermediate-mass stars

Intermediate-mass main-sequence stars have large radiative envelopes overlying convective cores. This configuration allows internal gravity waves (IGWs) generated at the convective–radiative interface to propagate towards the stellar surface. The signatures of these waves can be observed in the photometric and spectroscopic data from stars. Here, we have studied the propagation of these IGWs using two-dimensional (2D) fully non-linear hydrodynamical simulations with realistic stellar reference states from the 1D stellar evolution code, Modules for Stellar Astrophysics (MESA). When a single wave is forced, we observe wave self-interaction. When two waves are forced, we observe non-linear interaction (i.e. triadic interaction) between these waves forming waves at different wavelengths and frequencies. When a spectrum of waves similar to that found in numerical simulations is forced, we find that the surface IGW frequency slope is consistent with recent observations. This power law is similar to that predicted by linear theory for the wave propagation, with small deviations that can be an effect of non-linearities. When the same generation spectrum is applied to 3 M ⊙ models at different stellar rotation and ages, the surface IGW spectrum slope is very similar to the generation spectrum slope.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

The Universe at z > 10: predictions for JWST from the universemachine DR1

The James Webb Space Telescope (JWST) is expected to observe galaxies at z > 10 that are presently inaccessible. Here, we use a self-consistent empirical model, the universemachine, to generate mock galaxy catalogues and light-cones over the redshift range z = 0-15. These data include realistic galaxy properties (stellar masses, star formation rates, and UV luminosities), galaxy–halo relationships, and galaxy–galaxy clustering. Mock observables are also provided for different model parameters spanning observational uncertainties at z < 10. We predict that Cycle 1 JWST surveys will very likely detect galaxies with M* > 10 7 M⊙ and/or M 1500 < -17 out to at least z ~ 13.5. Number density uncertainties at z > 12 expand dramatically, so efforts to detect z > 12 galaxies will provide the most valuable constraints on galaxy formation models. Additionally, the faint-end slopes of the stellar mass/luminosity functions at a given mass/luminosity threshold steepen as redshift increases. This is because observable galaxies are hosted by haloes in the exponentially falling regime of the halo mass function at high redshifts. Hence, these faint-end slopes are robustly predicted to become shallower below current observable limits (M* < 10 7 M⊙ or M 1500 > -17). For reionization models, extrapolating luminosity functions with a constant faint-end slope from M 1500 = -17 down to M 1500 = -12 gives the most reasonable upper limit for the total UV luminosity and cosmic star formation rate up to z ~ 12. We compare to three other empirical models and one semi-analytic model, showing that the range of predicted observables from our approach encompasses predictions from other techniques. Public catalogues and light-cones for common fields are available online.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Rates and delay times of type Ia supernovae in the Dark Energy Survey

We use a sample of 809 photometrically classified Type Ia supernovae (SNe Ia) discovered by the Dark Energy Survey (DES) along with 40 415 field galaxies to calculate the rate of SNe Ia per galaxy in the redshift range 0.2 < z < 0.6. We recover the known correlation between SN Ia rate and galaxy stellar mass across a broad range of scales 8.5 ≤ log (M*/M ⊙ ) ≤ 11.25. We find that the SN Ia rate increases with stellar mass as a power law with index 0.63 ± 0.02, which is consistent with the previous work. We use an empirical model of stellar mass assembly to estimate the average star formation histories (SFHs) of galaxies across the stellar mass range of our measurement. Combining the modelled SFHs with the SN Ia rates to estimate constraints on the SN Ia delay time distribution (DTD), we find that the data are fit well by a power-law DTD with slope index β = –1.13 ± 0.05 and normalization A = 2.11 ± 0.05 × 10 –13 SNe M ⊙ –1 yr –1 , which corresponds to an overall SN Ia production efficiency N Ia /M * = 0.9 $^{+4.0}_{–0.7}$ × 10 –3 SNe M$^{–1}_{⊙}$. Upon splitting the SN sample by properties of the light curves, we find a strong dependence on DTD slope with the SN decline rate, with slower-declining SNe exhibiting a steeper DTD slope. We interpret this as a result of a relationship between intrinsic luminosity and progenitor age, and explore the implications of the result in the context of SN Ia progenitors.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

OzDES reverberation mapping program: Lag recovery reliability for 6-yr C iv analysis

ABSTRACT We present the statistical methods that have been developed to analyse the OzDES reverberation mapping sample. To perform this statistical analysis we have created a suite of customizable simulations that mimic the characteristics of each source in the OzDES sample. These characteristics include: the variability in the photometric and spectroscopic light curves, the measurement uncertainties, and the observational cadence. By simulating the sources in the OzDES sample that contain the C iv emission line, we developed a set of criteria that rank the reliability of a recovered time-lag depending on the agreement between different recovery methods, the magnitude of the uncertainties, and the rate at which false positives were found in the simulations. These criteria were applied to simulated light curves and these results used to estimate the quality of the resulting Radius–Luminosity relation. We grade the results using three quality levels (gold, silver, and bronze). The input slope of the R–L relation was recovered within 1σ for each of the three quality samples, with the gold standard having the lowest dispersion with a recovered a R–L relation slope of 0.454 ± 0.016 with an input slope of 0.47. Future work will apply these methods to the entire OzDES sample of 771 AGN.

79 ASTRONOMY AND ASTROPHYSICS↗