Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “shock hydrodynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2014

Multi-shock Shield Performance at 16.5 MJ for Catalogued Debris

While orbital debris of ten centimeters or more are tracked and catalogued, the difficulty of finding and accurately accounting for forces acting on the objects near the ten centimeter threshold results in both uncertainty of their presence and location. These challenges result in difficult decisions for operators balancing potential costly operational approaches with system loss risk. In this paper, numerical simulations and an experiment using the multi‐shock shield system is described for a cylindrical projectile composed of Nylon, aluminum and void that is approximately 8 cm in diameter and 10 cm in length weighing 670 g impacting the multi‐shock shield normal to the surface with approximately 16.5 MJ of kinetic energy. The multi‐shock shield system has been optimized to facilitate the fragmentation, spread and deceleration of the projectile remnants using hydrodynamic simulations of the impact event. The characteristics and function of each of the layers of the multi‐shock system will be discussed along with considerations for deployment and improvement.

Miller, J. E.↗
DOE OSTI2020

Species Separation and Hydrogen Streaming upon Shock Release from Polystyrene under Inertial Confinement Fusion Conditions

Shock release from inertial confinement fusion (ICF) shells poses a great challenge to single-fluid hydrodynamic equations, especially for describing materials composed of different ion species. This has been evidenced by a recent experiment [Haberberger et al., Phys. Rev. Lett. 123, 235001 (2019)], in which low-density plasmas ( 10 19 to 10 20 cm – 3 ) are measured to move far ahead of what radiation-hydrodynamic simulations predict. To understand such experimental observations, in this work we have performed large-scale nonequilibrium molecular-dynamics simulations of shock release in polystyrene (CH) at experimental conditions. These simulations revealed that upon shock releasing from the back surface of a CH foil, hydrogen can stream out of the bulk of the foil due to its mass being lighter than carbon. This released hydrogen, exhibiting a much broader velocity distribution than carbon, forms low-density plasmas moving in nearly constant velocities ahead of the in-flight shell, which is in quantitative agreement with the experimental measurements. Such kinetic effect of species separation is currently missing in single-fluid radiation-hydrodynamics codes for ICF simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Fluid-like shock compression of dilute polymer nanocomposites

The shock Hugoniot of heterogenous mixtures of discrete particles has been experimentally investigated for porous agglomerates and fluids, while the study of full-density solids has been primarily limited to compressed powders and high-dimensional composites. By dispersing ceria nanoparticles in a polyethylene matrix, we are able to examine the hydrodynamic behavior of a nonporous, heterogenous solid in thermal equilibrium during weak shock compression. Phase-driven discontinuities in the Hugoniot particle velocity–shock velocity (u−D) relationship of pure polyethylene are replicated in the nanocomposites but are shifted to lower velocity and to higher pressure with higher particle concentration. The results are explained using an isothermal, two-velocity fluid model under the hydrodynamic approximation. The model, which assumes a theoretical equation-of-state for ceria and either a low-order or high-order fit to the measured polyethylene Hugoniot, reasonably predicts the Hugoniot for two different polyethylene/ceria nanocomposites. Using the model, the mixture Hugoniot is shown to be insensitive to the Hugoniot of the stiffer constituent when the moduli are sufficiently disparate, while dependence on particle density and volume fraction is preserved through fluid-like motion.

Moore, Nathan W. [Sandia National Laboratories (SN↗
DOE OSTI2024

Probing shocks interacting with radiation waves with the Radishock experiment

Both radiation flows and shocks have been extensively studied in the laboratory in the past few decades due to their critical roles in many astrophysical and high-energy density physics processes. In the Radishock experiment, a halfraum-powered radiation wave is driven into a low-density foam and interacts with an ablatively driven, counter-propagating shock. The interacting waves produce a spike in energy density with a temperature greater than the local temperature of the individual waves. As in the successful predecessor experiment, COAX, the primary diagnostic uses absorption spectroscopy at many locations down the cylindrical target, enabling a spatial temperature inference of the radiation wave and its interactions with the shock. Combined with a radiography diagnostic that is capable of imaging the shock and interaction features, we are able to study and inform model predictions of the interaction spike phenomenon. We describe the underlying physics behind the shock interactions with the radiation front and the implications of this experimental study for a broad range of astrophysical phenomena.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Radiation and heat transport in divergent shock–bubble interactions

Shock–bubble interactions (SBIs) are important across a wide range of physical systems. In inertial confinement fusion, interactions between laser-driven shocks and micro-voids in both ablators and foam targets generate instabilities that are a major obstacle in achieving ignition. Experiments imaging the collapse of such voids at high energy densities (HED) are constrained by spatial and temporal resolution, making simulations a vital tool in understanding these systems. In this study, we benchmark several radiation and thermal transport models in the xRAGE hydrodynamic code against experimental images of a collapsing mesoscale void during the passage of a 300 GPa shock. We also quantitatively examine the role of transport physics in the evolution of the SBI. This allows us to understand the dynamics of the interaction at timescales shorter than experimental imaging framerates. We find that all radiation models examined reproduce empirical shock velocities within experimental error. Radiation transport is found to reduce shock pressures by providing an additional energy pathway in the ablation region, but this effect is small (∼1% of total shock pressure). Employing a flux-limited Spitzer model for heat conduction, we find that flux limiters between 0.03 and 0.10 produce agreement with experimental velocities, suggesting that the system is well-within the Spitzer regime. Higher heat conduction is found to lower temperatures in the ablated plasma and to prevent secondary shocks at the ablation front, resulting in weaker primary shocks. Finally, we confirm that the SBI-driven instabilities observed in the HED regime are baroclinically driven, as in the low energy case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

3D mesh regularization within an ALE code using a weighted line sweeping method

The Lagrangian formalism is widely used to simulate hydrodynamic responses in complex engineering applications, particularly those involving strong shock waves. However, as the mesh moves with the fluid, it can become highly distorted, requiring a regularization step. This involves constructing a new grid and remapping conservative quantities onto it to restore mesh quality. This work introduces a regularization method for block-structured meshes within a 3D ALE (Arbitrary Lagrangian-Eulerian) code. The proposed approach prevents mesh tangling while preserving the anisotropic features of the initial Lagrangian mesh. This regularization technique incorporates aspect ratio-based weights to control mesh smoothing. Unlike uniform rezoning techniques, this weighted approach maintains proximity to the Lagrangian mesh while improving mesh quality. Here, the method effectively handles concave geometries by mitigating the grid attraction phenomenon, which typically leads to mesh concentration along concave edges. Numerical experiments demonstrate its efficiency in regularizing severely deformed meshes, and its integration within the ALE framework is validated on challenging hydrodynamic test cases, including the triple point problem.

42 ENGINEERING↗
DOE OSTI2024

Evidence of non-isentropic release from high residual temperatures in shocked metals measured with ultrafast x-ray diffraction

Shock experiments are widely used to understand the mechanical and electronic properties of matter under extreme conditions. However, after shock loading to a Hugoniot state, a clear description of the post-shock thermal state and its impacts on materials is still lacking. We used diffraction patterns from 100-fs x-ray pulses to investigate the temperature evolution of laser-shocked Al–Zr metal film composites at time delays ranging from 5 to 75 ns driven by a 120-ps short-pulse laser. We found significant heating of both Al and Zr after shock release, which can be attributed to heat generated by inelastic deformation. A conventional hydrodynamic model that employs (i) typical descriptions of Al and Zr mechanical strength and (ii) elevated strength responses (which might be attributed to an unknown strain rate dependence) did not fully account for the measured temperature increase, which suggests that other strength-related mechanisms (such as fine-scale void growth) could play an important role in thermal responses under shock wave loading/unloading cycles. Our results suggest that a significant portion of the total shock energy delivered by lasers becomes heat due to defect-facilitated plastic work, leaving less converted to kinetic energy. This heating effect may be common in laser-shocked experiments but has not been well acknowledged. High post-shock temperatures may induce phase transformation of materials during shock release. Another implication for the study is the preservability of magnetic records from planetary surfaces that have a shock history from frequent impact events.

42 ENGINEERING↗
DOE OSTI2026

Optimizing time integration for accurate recovery of shockwave interface location in radiography

We present simulations and experiments of time integrated radiographic imaging of a moving 1D shock wave front and a quantitative method for determining the statistical error in locating the shock front as a function of integration time and noise in the radiograph. We discuss the trade-off between increasing motion blur, which leads to decreased shock front location certainty, and increasing signal-to-noise, which leads to improved image quality with increasing integration time. We find an optimum integration time between a short integration time, where noise limits the error, and a long integration time, where motion blurring limits the error. This methodology can be used to tune experimental configurations to obtain the highest quality radiograph for a given experimental configuration.

Bremsstrahlung↗
DOE OSTI2025

Viscosity Measurements in Extreme Conditions

Radiation-hydrodynamics simulations are critical to the NNSA complex for understanding high energy density physics and for addressing problems in national security science. However, current rad-hydro codes typically do not account for viscosity, which generally leads to large uncertainties in problems involving mixing of materials under shock loading. This report details progress made towards experimental measurements of fluid viscosity at high pressures and temperatures achieved by shock wave compression techniques, as well as complementary material model development and hydrodynamic simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Coupling solidification kinetics with phase-behavior computations in hydrodynamic simulations of high-pressure, dynamic-compression processes

In this study, we report a numerical scheme to integrate models for the kinetics of solidification processes together with phase-behavior computations in the context of continuum-scale hydrodynamic simulations. The objective of the phase-behavior computations is to determine the pressure and temperature, given the following three sets of inputs: (1) an appropriate equation of state to describe our system, (2) the phase fraction(s) produced by the kinetic models, (3) and the volume and internal energy obtained by solving the conservation equations that govern the hydrodynamic behavior. The kinetics are assumed to be governed by the Kolmogorov–Johnson–Mehl–Avrami equation, and the nucleation and growth rates that enter into that equation are functions of the pressure and temperature produced by the phase-behavior computations. Our formulation allows for the fluid and solid phases to be at different temperatures (thermal nonequilibrium) and pressures (arising from surface-tension-induced Laplace contributions). The formulation is presented in a fairly general setting that is independent of any particular material, although we demonstrate it in some examples related to high-energy-density science applications where materials are rapidly compressed to pressures exceeding several gigapascals in less than a microsecond. We conclude with a critical evaluation of our approach and provide suggestions for future work to improve the predictive capabilities and generality of the models.

42 ENGINEERING↗
DOE OSTI2026

Microscopy X-ray imaging enriched with small angle X-ray scattering for few nanometer resolution reveals shock waves and compression in intense short pulse laser irradiation of solids

Understanding how laser pulses compress solids into high-energy-density states requires diagnostics that simultaneously resolve macroscopic geometry and nanometer-scale structure. Here we present a combined X-ray imaging (XRM) and small-angle X-ray scattering (SAXS) approach that bridges this diagnostic gap. Using the Matter in Extreme Conditions end station at LCLS, we irradiated 25 μm copper wires with 45 fs, 0.9 J, 800 nm pulses at 3.5 × 10 19 W/cm 2 while probing with 8.2 keV XFEL pulses. XRM visualizes the evolution of ablation, compression, and inward-propagating fronts with ∼ 200 nm resolution, while SAXS quantifies their nanometer-scale sharpness via the time-resolved evolution of scattering streaks. The joint analysis reveals that an initially smooth compression steepens into a nanometer-sharp shock front after t sh ≈ (18 ± 3) ps, consistent with an analytical steepening model and hydrodynamic simulations. The front reaches a velocity of c sh ≈ 25 k m / s and a lateral width of several tens of microns, demonstrating direct observation of shock formation and decay at solid density for the first time with few-nanometer precision. This integrated XRM–SAXS method establishes a quantitative, multi-scale diagnostic of laser-driven shocks in dense plasmas relevant to inertial confinement fusion, warm dense matter, and planetary physics.

Kluge, Thomas [Helmholtz-Zentrum Dresden-Rossendor↗
NASA NTRS1988

Modified non-linear Burgers' equations and cosmic ray shocks

A reductive perturbation scheme is used to derive a generalized non-linear Burgers' equation, which includes the effects of dispersion, in the long wavelength regime for the two-fluid hydrodynamical model used to describe cosmic ray acceleration by the first-order Fermi process in astrophysical shocks. The generalized Burger's equation is derived for both relativistic and non-relativistic cosmic ray shocks, and describes the time evolution of weak shocks in the theory of diffusive shock acceleration. The inclusion of dispersive effects modifies the phase velocity of the shock obtained from the lower order non-linear Burger's equation through the introduction of higher order terms from the long wavelength dispersion equation. The travelling wave solution of the generalized Burgers' equation for a single shock shows that larger cosmic ray pressures result in broader shock transitions. The results for relativistic shocks show a steepening of the shock as the shock speed approaches the relativistic cosmic ray sound speed. The dependence of the shock speed on the cosmic ray pressure is also discussed.

Zank, G. P.↗
DOE OSTI2024

Shock compression experiments using the DiPOLE 100-X laser on the high energy density instrument at the European x-ray free electron laser: Quantitative structural analysis of liquid Sn

X-ray free electron laser (XFEL) sources coupled to high-power laser systems offer an avenue to study the structural dynamics of materials at extreme pressures and temperatures. The recent commissioning of the DiPOLE 100-X laser on the high energy density (HED) instrument at the European XFEL represents the state-of-the-art in combining x-ray diffraction with laser compression, allowing for compressed materials to be probed in unprecedented detail. Here, we report quantitative structural measurements of molten Sn compressed to 85(5) GPa and ~3500 K. The capabilities of the HED instrument enable liquid density measurements with an uncertainty of ~1% at conditions which are extremely challenging to reach via static compression methods. We discuss best practices for conducting liquid diffraction dynamic compression experiments and the necessary intensity corrections which allow for accurate quantitative analysis. We also provide a polyimide ablation pressure vs input laser energy for the DiPOLE 100-X drive laser which will serve future users of the HED instrument.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Planetesimal Impact Vapor Plumes and Nebular Shocks Form Chondritic Mixtures

The origin of chondrules and the chondritic sedimentary rocks that dominate the meteoritic record is a long-standing problem in planetary science. Here, we develop a physical model for the formation of chondritic mixtures as an outcome of vaporizing collisions between planetesimals that were dynamically excited by the growth and migration of planets. We present calculations of nebular shock waves generated by impact vapor plumes and focus on aspects of the plume interaction with the nebular gas and dust that have been neglected in previous studies of impact ejecta. We find that when water dominates the vapor, the plumes are relatively cool. However, the plume expansion is supersonic and can drive strong shock waves in the dusty nebular gas. Portions of these nebular shock fronts initially melt nebular dust, forming chondrules that are coupled to the moving front. As the shock front expands and cools, the chondrules solidify, while the shock front entrains additional dust. Eventually, the plume expansion stalls and then hydrodynamically collapses, turbulently mixing variably processed dust and size-sorted chondrules. For probable impact parameters and nebular conditions during giant planet growth and migration, the impact-generated mixtures have characteristics that span the range observed in chondritic meteorites, providing an environment for rapid formation of chondritic assemblages after chondrule formation. Our impact vapor and nebular shocks model, named the IVANS model, links chondrule formation to the overall context of planet formation and provides a framework for interpreting the detailed chronological and geochemical record contained in chondritic meteorites.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Highly ordered graphite (HOPG) to hexagonal diamond (lonsdaleite) phase transition observed on picosecond time scales using ultrafast x-ray diffraction

Here, the response of rapidly compressed highly oriented pyrolytic graphite (HOPG) normal to its basal plane was investigated at a pressure of ~80 GPa. Ultrafast x-ray diffraction using ~100 fs pulses at the Materials Under Extreme Conditions sector of the Linac Coherent Light Source was used to probe the changes in crystal structure resulting from picosecond timescale compression at laser drive energies ranging from 2.5 to 250 mJ. A phase transformation from HOPG to a highly textured hexagonal diamond structure is observed at the highest energy, followed by relaxation to a still highly oriented, but distorted graphite structure following release. We observe the formation of a highly oriented lonsdaleite within 20 ps, subsequent to compression. This suggests that a diffusionless martensitic mechanism may play a fundamental role in phase transition, as speculated in an early work on this system, and more recent static studies of diamonds formed in impact events.

58 GEOSCIENCES↗
DOE OSTI2023

Fluid dynamic mathematical aspects of supernova remnants

Supernovae—explosions of stars—are a central problem in astrophysics since they contain information on the entire process of stellar evolution and nucleosynthesis. Rayleigh–Taylor (RT) and Richtmyer–Meshkov (RM) instabilities, developing during the supernova blast, lead to intense interfacial RT/RM mixing of the star's materials and couple astrophysical to atomic scales. This work analyzes some fluid dynamic mathematical aspects of the titanic task of supernova's blast. We handle mathematical challenges of RT/RM dynamics in supernova relevant conditions by directly linking the conservation laws governing RT/RM dynamics to symmetry-based momentum model, by exactly deriving the model parameters in the scale-dependent and scale-invariant regimes, and by exploring the special self-similar class for RT/RM interfacial mixing with variable accelerations. Here we reveal that RT/RM dynamics is strongly influenced by deterministic (the initial and the flow) conditions in the scale-dependent linear and nonlinear regimes and in the self-similar mixing regime. The theory outcomes are consistent with the observations of supernova remnants, explain the results of the scaled laboratory experiments in high energy density plasmas, and yield the design of future experiments for the accurate quantification of RT/RM dynamics in supernova relevant conditions. We find that from fluid dynamic mathematical perspectives, supernovae can be regarded as an astrophysical initial value problem. Along with the guidance of what explodes at microscopic scales, supernova remnants encapsulate information on the explosion hydrodynamics and the associated deterministic conditions at macroscopic scales. We urge such effects be considered in interpretations of the observational data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1979

The violent interstellar medium

Observational evidence for high-velocity and high-temperature interstellar gas is reviewed. The physical processes that characterize this gas are described, including the ionization and emissivity of coronal gas, the behavior and appearance of high-velocity shocks, and interfaces between coronal gas and cooler interstellar gas. Hydrodynamical models for the action of supernova explosions and stellar winds on the interstellar medium are examined, and recent attempts to synthesize all the processes considered into a global model for the interstellar medium are discussed.

Mccray, R.↗
NASA NTRS1989

The intergalactic medium and galaxy formation

Recent observational and theoretical investigations of the intergalactic medium (IGM), defined as the component of the baryon-electron matter which now occupies the space between galaxies and which filled the pregalactic universe, are reviewed. Topics addressed include the Gunn-Peterson constraint on the history of the IGM, the mean mass density of the IGM at high redshift, requirements for ionizing the IGM, the observed quasar contribution, the thermal and ionization history of the IGM (quasar photoionization, stellar sources of the ionizing background, and alternative sources such as protogalactic shock radiation and the decay of exotic particles), and the hydrodynamical evolution of the IGM. Typical results from observations and numerical simulations are presented graphically.

Shapiro, Paul R.↗