SEARCH · Engineering Papers

Results for “separator modification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

NASA NTRS1974

Civil helicopter noise assessment study Boeing-Vertol model 347

A study was conducted to forecast the noise restrictions which may be imposed on civil transport helicopters in the 1975-1985 time period. Certification and community acceptance criteria were predicted. A 50 passenger tandem rotor helicopter based on the Boeing-Vertol Model 347 was studied to determine the noise reductions required, and the means of achieving them. Some of the important study recommendations are: (1) certification limits should be equivalent to 95 EPNdb at data points located at 500 feet to each side of the touchdown/takeoff point, and 1000 feet from this point directly under the approach and departure flight path. (2) community acceptance should be measured as Equivalent Noise Level (Leq), based on dBA, with separate limits for day and night operations, and (3) in order to comply with the above guidelines, the Model 347 helicopter will require studies and tests leading to several modifications.

Hinterkeuser, E. G.↗

NASA NTRS1979

Theoretical study of aerodynamic characteristics of wings having vortex flow

The aerodynamic characteristics of slender wings having separation induced vortex flows are investigated by employing three different computer codes--free vortex sheet, quasi vortex lattice, and suction analogy methods. Their capabilities and limitations are examined, and modifications are discussed. Flat wings of different configurations: arrow, delta, and diamond shapes, as well as cambered delta wings, are studied. The effect of notch ratio on the load distributions and the longitudinal characteristics of a family of arrow and diamond wings is explored. The sectional lift coefficients and the accumulated span loadings are determined for an arrow wing and are seen to be unusual in comparison with the attached flow results. The theoretically predicted results are compared with the existing experimental values.

Reddy, C. S.↗

NASA NTRS1984

Waterproof Raised Floor Makes Utility Lines Accessible

Floor for laboratories, hospitals and factories waterproof yet allows access to subfloor utilities. Elevated access floor system designed for installations with multitude of diverse utility systems routed under and up through floor and requirement of separation of potentially conflicting utility services. Floor covered by continuous sheet of heat resealable vinyl. Floor system cut open when changes are made in utility lines and ducts. After modifications, floor covering resealed to protect subfloor utilities from spills and leaks.

Cohen, M. M.↗

NASA NTRS1984

Two-dimensional wake characteristics of inlet vanes for open-circuit wind tunnels

This paper summarizes the near-field flow characteristics measured downstream of a half-scale two-dimensional wind-tunnel model of the inlet vanes designed for the National Full-Scale Facilities Complex at NASA Ames Research Center. Variations on this baseline were tested to determine how the downstream flow field is affected. Evaluations of the various configurations were made by the use of hot-wire surveys across the flow-field. These traverses yielded the properties of total pressure, boundary layers, and turbulence in the wake of the vanes. It was found that large variations in the flow field characteristics downstream of the vanes are achieved by the use of various arrangements of splitter vanes, vortex generators, screens, tail extensions, and honeycomb. Separation on the boat-tails of the vanes can be controlled and turbulence reduced by suitable combinations of screens or honeycomb or both. The penalties associated with each modification in terms of increased pressure loss are also presented.

Dudley, M. R.↗

NASA NTRS1984

An E-plane analysis of aperture-matched horn antennas using the moment method and the uniform geometrical theory of diffraction

The moment method and the uniform geometrical theory of diffraction are utilized to obtain two separate solutions for the E-plane field pattern of an aperture-matched horn antenna. This particular horn antenna consists of a standard pyramidal horn with the following modifications: a rolled edge section attached to the aperture edges and a curved throat section. The resulting geometry provides significantly better performance in terms of the pattern, impedance, and frequency characteristics than normally obtainable. The moment method is used to calculate the E-plane pattern and BSWR of the antenna. However, at higher frequencies, large amounts of computation time are required. The uniform geometrical theory of diffraction provides a quick and efficient high frequency solution for the E-plane field pattern. In fact, the uniform geometrical theory of diffraction may be used to initially design the antenna; then, the moment method may be applied to fine tune the design. This procedure has been successfully applied to a compact range feed design.

Heedy, D. J.↗

NASA NTRS1986

Solar wind helium, neon and argon released by oxidation of metal grains from the Weston chondrite

A set of experiments were carried out to test the feasibility of determining unfractionated elemental and isotopic ratios for the noble gases in the presumably ancient solar wind present in the gas rich meteorites. The problems of diffusive loss was avoided by analyzing metal rather than the usual silicates. In order to avoid chemical, and even harsh physical, treatment of the sample, which might have affected the surfaces of metal grains, a means of analyzing the metal in the presence of residual silicate not removed by gentle crushing and magnetic separation was devised. Preliminary results given were obtained by taking advantage of the differing properties of metal and silicates with regard to diffusion. The results suggests that, with some modifications in the choice of pyrolysis and combustion temperatures and in the amount of O2 used, it should be possible, by oxidizing the surfaces of metal grains from gas rich meteorites, to obtain data on solar wind that has not been fractionated by diffusive loss.

Becker, R. H.↗

NASA NTRS1990

Traffic placement policies for a multi-band network

Recently protocols were introduced that enable the integration of synchronous traffic (voice or video) and asynchronous traffic (data) and extend the size of local area networks without loss in speed or capacity. One of these is DRAMA, a multiband protocol based on broadband technology. It provides dynamic allocation of bandwidth among clusters of nodes in the total network. A number of traffic placement policies for such networks are proposed and evaluated. Metrics used for performance evaluation include average network access delay, degree of fairness of access among the nodes, and network throughput. The feasibility of the DRAMA protocol is established through simulation studies. DRAMA provides effective integration of synchronous and asychronous traffic due to its ability to separate traffic types. Under the suggested traffic placement policies, the DRAMA protocol is shown to handle diverse loads, mixes of traffic types, and numbers of nodes, as well as modifications to the network structure and momentary traffic overloads.

Maly, Kurt J.↗

NASA NTRS2017

Modeling Chemical Reactions in Classical Molecular Dynamics Simulations

An algorithm capable of incorporating multi-step reaction mechanisms into atomistic molecular dynamics (MD) simulations using traditional fixed valence force fields is proposed and implemented within the framework of LAMMPS (Large-scale Atomic Molecular Massively Parallel Simulator). This extension, referred to as fix bond/react, enables bonding topology modifications during a running MD simulation using pre- and post-reaction bonding templates to carry out a pre-specified reaction. Candidate reactants are first identified by interatomic separation, followed by the application of a generalized topology matching algorithm to confirm they match the pre-reaction template. This is followed by a topology conversion to match the post-reaction template and a dynamic relaxation to minimize high energy configurations. Two case studies, the condensation polymerization of nylon 6,6 and the formation of a highly-crosslinked epoxy, are simulated to demonstrate the robustness, stability, and speed of the algorithm. Improvements which could increase its utility are discussed.

Jacob R Gissinger↗

NASA NTRS1976

Modularized ion thruster

A modularized ion thruster system was developed for space-propulsion applications. Separate discharge chamber modules (DCMs) were optimized for operation at the thrust levels of T = 0.5 mlb and T = 2 mlb to accommodate the extended thrust range. These optimizations included modifications in the discharge-chamber components and the incorporation of ion machined accelerators in the beam-extraction systems. Performance of the optimized modules are summarized.

Hyman, J., Jr.↗

NASA NTRS1985

Viking Radio Science Data Analysis and Synthesis

The objectives of the analysis of the Viking radio tracking data are: (1) the study of Mars, its rotation, topography, and internal structure; (2) the development of a general dynamical model of the solar system; and (3) tests of the fundamental laws of gravitation. The central element in the data analysis is the Planetary Ephemeris Program (PEP) which embodies the mathematical models of the solar system. The asteroid model in PEP is changed to better estimate the mass of a fictitious uniform ring and the masses of eight separate asteroids. A model of the rotation of Mars include a secular rate of change of the period and both annual and semiannual variations in the phase of rotation. Other modifications to this model are discussed.

Shapiro, I. I.↗

NASA NTRS1985

An aperture-matched compact range feed horn design

The moment method and the uniform geometrical theory of diffraction are used to obtain two separate solutions for the E-plane far field pattern of an aperture-matched horn antenna. This particular horn antenna consists of a standard pyramidal horn with the following modifications: a rolled edge section attached to the aperture edges and a curved throat section. The resulting geometry provides significantly better performance in terms of the pattern, impedance, and frequency characteristics than normally obtainable. The moment method is used to calculate the E-plane pattern and voltage standing-wave ratio (VSWR) of the antenna. However, at higher frequencies, the moment method requires large amounts of computation time. On the other hand, the uniform geometrical theory of diffraction provides a quick and efficient high frequency solution for the E-plane field pattern. This procedure has been successfully applied to design a compact range feed horn.

Heedy, D. J.↗

NASA NTRS1987

Landsat classification of Argentina summer crops

A Landsat MSS and TM classification approach based on three features derived from the greenness profile has proved very effective in separating and identifying corn, soybeans, and other ground cover classes in the U.S. The objective of this study is to investigate the separation of summer crops in Argentina, one of the most important commodity exporters, using the same greenness profile features that have proved effective in the U.S. Corn Belt. The area chosen for study is a more complex cropping practice area located in the north-west corner of Buenos Aires province in Pampa Humeda, where corn, soybean, sorghum, sunflower, and pastures are cultivated. It is shown that the profile features can provide very effective separation, except in the case of corn from sorghum. Separation between corn and soybeans was found to be greater than in the U.S. This study suggests that the automatic, unsupervised classification approach developed in the U.S., with relatively minor modification, can be used for summer crop area estimation in Argentina.

Badhwar, G. D.↗

NASA NTRS2016

Toward n-Ship Computation of Trajectories for Shared Airspace

This paper considers an approach for modelling transport aircraft trajectories that can facilitate their rapid evaluation and modification, either en route or in terminal control areas, with the goal of efficiently making use of airspace and runways by a large population of vehicles without pairwise violation of separation criteria.

Moerder, Daniel D.↗

NASA NTRS1986

Applications of a new wall function to turbulent flow computations

A new wall function approach is developed based on a wall law suitable for incompressible turbulent boundary layers under strong adverse pressure gradients. This wall law was derived from a one-dimensional analysis of the turbulent kinetic energy equation with gradient diffusion concept employed in modeling the near-wall shear stress gradient. Numerical testing cases for the present wall functions include turbulent separating flows around an airfoil and turbulent recirculating flows in several confined regions. Improvements on the predictions using the present wall functions are illustrated. For cases of internal recirculating flows, one modification factor for improving the performance of the k-epsilon turbulence model in the flow recirculation regions is also included.

Chen, Y. S.↗

NASA NTRS2006

NASA Balloon Technology Activities

The National Aeronautics and Space Administration (NASA) Balloon Program technology development efforts are fundamental to improving the capabilities of the balloon systems, better understanding of the flight dynamics, and to support the science missions throughout the next decade. Building on the foundations of the 20-year research and development program, a technology roadmap has been generated which identifies specific areas of interest to NASA and the vision of future developments. The major components of the roadmap are: vehicle systems, ballooncraft systems, operational and safety support systems, and planetary vehicles. Within each of these major components, technologies are targeted that will provide both better understanding and foster advancements. The Program's technology thrust areas are directed both in broad efforts that touch on a number of the major components as well as specific tasks that address elements within a specific component. Advances in vehicle systems have focused on producing better balloon designs. This is being attempted through the use of improved inputs into the ba!loon des@ process. Central to this is an increasing the understanding of materials used to fabricate balloons. Testing techniques have been improved with better bi-axial characterization of the balloon materials. More realistic radiative properties of the balloon films and components have also been made. Analytical assessments of the balloon designs are also key in improving balloon designs. These analytical assessments have been accomplished using improving analysis tools and an increased understanding of the float environment. Details of these improvements will be presented. To help improve the operational and flight safety of the balloons, improved flight performance predictions have been made using new analytical tools as well as incorporating the increased understanding of the float environment. These two have combined to allow for improved post-flight balloon performance correlations. A potential to significantly improve the potential safety of a long duration flight can be accomplished using some form of a trajectory modification system. An overview of the development efforts for a trajectory modification system will be presented. A number of efforts will be presented that are focused on the improvement of the ballooncraft systems. Planetary ballooning activities have benefited from a number of separate but related technology advancements made by the NASA Balloon Program's technology developments. The tools, techniques, and advancements made for balloon design and balloon analysis are directly applicable to the processes to develop planetary balloons for either Mars or Venus. An overview of the NASA Balloon Program's role in these efforts and testing will be presented. The technology roadmap, as well as specific projects and recent advancements, will be presented. This overview will demonstrate the technology advancements made by the NASA Balloon Program are focusing on leading balloon developments into the future.

Fairbrother, Debora A.↗

NASA NTRS2009

A Review of the MLAS Parachute Systems

The NASA Engineering and Safety Center (NESC) is developing the Max Launch Abort System (MLAS) as a risk-mitigation design should problems arise with the baseline Orion spacecraft launch abort design. The Max in MLAS is dedicated to Max Faget, the renowned NASA spacecraft designer. The MLAS flight test vehicle consists of boost skirt, coast skirt and the MLAS fairing which houses a full scale boilerplate Orion Crew Module (CM). The objective of the flight test is to prove that the CM can be released from the MLAS fairing during pad abort conditions without detrimental recontact between the CM and fairing, achieving performance similar to the Orion launch abort system. The boost and coast skirts provide the necessary thrust and stability to achieve the flight test conditions and are released prior to the test -- much like the Little Joe booster was used in the Apollo Launch Escape System tests. To achieve the test objective, two parachutes are deployed from the fairing to reorient the CM/fairing to a heatshield first orientation. The parachutes then provide the force necessary to reduce the total angle of attack and body angular rates required for safe release of the CM from the fairing. A secondary test objective after CM release from the fairing is to investigate the removal of the CM forward bay cover (FBC) with CM drogue parachutes for the purpose of attempting to synchronously deploying a set of CM main parachutes. Although multiple parachute deployments are used in the MLAS flight test vehicle to complete its objective, there are only two parachute types employed in the flight test. Five of the nine parachutes used for MLAS are 27.6 ft D(sub 0) ribbon parachutes, and the remaining four are standard G-12 cargo parachutes. This paper presents an overview of the 27.6 ft D(sub 0) ribbon parachute system employed on the MLAS flight test vehicle for coast skirt separation, fairing reorientation, and as drogue parachutes for the CM after separation from the fairing. Discussion will include: the process used to select this design, previously proven as a spin/stall recovery parachute; descriptions of all components of the parachute system; the minor modifications necessary to adapt the parachute to the MLAS program; the techniques used to analyze the parachute for the multiple roles it performs; a discussion of the rigging techniques used to interface the parachute system to the vehicle; and a brief description of how the evolution of the program affected parachute usage and analysis. An overview of the Objective system, rationale for the MLAS approach and the future of the program will also be presented. We hope to have flight test results to report at the time of the Conference Presentation.

Taylor, Anthony P.↗

NASA NTRS2010

The NASA MLAS Flight Demonstration - A Review of a Highly Successful Test

NASA has tested the Max Launch Abort System (MLAS) as a risk-mitigation design should problems arise with the baseline Orion spacecraft launch abort design. The Max in MLAS is not Maximum, but rather dedicated to Max Faget, The renowned NASA Spacecraft designer. In the fall of 2009, the mission was flown, with great success, from the NASA Wallops Flight Facility. The MLAS flight test vehicle prototype consists of a boost ring, coast ring, and the MLAS fairing itself, which houses an Orion Command Module (CM) boilerplate. The objective of the MLAS flight test is to reorient the fairing with the CM, weighing approximately 29,000 lbs and traveling 290 fps, 180 degrees to an orientation suitable for the release of the CM during a pad abort and low altitude abort. Although multiple parachute deployments are used in the MLAS flight test vehicle to complete its objective, there are only two parachute types employed in the flight test. Five of the nine parachutes used for MLAS are 27.6 ft DO ribbon parachutes, and the remaining four are standard G-12 cargo parachutes. This paper presents an overview of the 27.6 ft DO ribbon parachute system employed on the MLAS flight test vehicle for coast ring separation, fairing reorientation, and as drogue parachutes for the CM after separation from the fairing. Discussion will include: the process used to select this design, previously proven as a spin/stall recovery parachute; descriptions of all components of the parachute system; the minor modifications necessary to adapt the parachute to the MLAS program; the techniques used to analyze the parachute for the multiple roles it performs; a discussion of the rigging techniques used to interface the parachute system to the vehicle; a brief description of how the evolution of the program affected parachute usage and analysis; and a summary of the results of the flight test, including video of the flight test and subsequent summary analysis. . A discussion of the flight test which was highly successful as well as the flight test observations will be a significant portion of the review.

Taylor, Anthony P.↗

DOE OSTI2025

Multiplicity-dependent jet modification from di-hadron correlations in pp collisions at $ \sqrt{s} $ = 13 TeV

Short-range correlations between charged particles are studied via two-particle angular correlations in pp collisions at $\sqrt{s}$ = 13 TeV. The correlation functions are measured as a function of the relative azimuthal angle ∆φ and the pseudorapidity separation ∆η for pairs of primary charged particles within the pseudorapidity interval |η| < 0.9 and the transverse-momentum range 1 < p T < 8 GeV/c. Near-side (|∆φ| < 1.3) peak widths are extracted from a generalised Gaussian fitted over the correlations in full pseudorapidity separation (|∆η| < 1.8), while the per-trigger associated near-side yields are extracted for the short-range correlations (|∆η| < 1.3). Both are evaluated as a function of charged-particle multiplicity obtained by two different event activity estimators. The width of the near-side peak decreases with increasing multiplicity, and this trend is reproduced qualitatively by the Monte Carlo event generators PYTHIA 8, AMPT, and EPOS. However, the models overestimate the width in the low transverse-momentum region (p T < 3 GeV/c). The per-trigger associated near-side yield increases with increasing multiplicity. Although this trend is also captured qualitatively by the considered event generators, the yield is mostly overestimated by the models in the considered kinematic range. The measurement of the shape and yield of the short-range correlation peak can help us understand the interplay between jet fragmentation and event activity, quantify the narrowing trend of the near-side peak as a function of transverse momentum and multiplicity selections in pp collisions, and search for final-state jet modification in small collision systems.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗