Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “semiconducting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Electrically Conductive Polyimide Films

Semiconducting surfaces of SnO2 formed by curing polyamic acids containing tin complexes. Polyimide films made semiconductive via incorporation of semiconductive surface layers of SnO2. If SnO2-surfaced polyimide film used as free-standing film, then semiconductive layer protected by top coat of polyimide, deposited as film from solution directly onto SnO2. Resultant films flexible and resistant to both weather and high temperature. Used on aircraft to provide resistance to lightning strikes, and in microelectronics and flexible circuitry.

St. Clair, Anne K.↗
NASA NTRS1998

Substrate Effects on Electronic Properties of Atomic Chains

Atomic chains, precise structures of adatoms created on an atomically regulated surface, are candidates for constituent elements in future electronics. It was predicted that Si chains were metallic and Mg chains were semiconducting, and a doping method was also discussed. The substrate was assumed to work as a non-interacting template holding the adatoms. However, this scheme requires a low-temperature environment so that the adatoms will not displace from their ideal positions due to unwanted thermal agitation. For better structural stability, we may seek a scheme to allow the adatoms to form chemical bonding with the substrate atoms and secure their positions. The chemical bonding has two major effects on the chain electronic properties. First, only the remaining s and p orbitals in an adatom not used for the chemical bonding can decide chain band structures, rather than the full set of orbitals previously assumed. Second, because of a possible HOMO energy difference between adatom and substrate atom, semiconducting chains are unintentionally doped. These effects are studied with a self-consistent tight-binding method with universal parameters. With one adatom per unit cell, adatom chains are semiconducting: (1) if adatoms are of group III and form one chemical bond per adatom, or (2) if adatoms are of group IV and form two chemical bonds. 'Me previous result [I I of realizing semiconducting chains by group II adatoms without chemical bonds is consistent with this picture. When the HOMO energy in an adatom is shallower than that in a substrate atom, the entire chain is positively polarized, unintentionally achieving p-type doping. When deeper, the chain is negatively charged, achieving n-type doping.

Yamada, Toshishige↗
DOE OSTI2023

Polyoxometalate derivatized metal oxide electrodes

A porous transparent electrode is formed where a film comprising of semiconducting nanoparticles is decorated with polyoxometalates (POMs) bonded to their surfaces. The semiconducting nanoparticles are transparent metal oxide. The semiconducting nanoparticles include tin-doped indium oxide (ITO), fluorine-doped tin oxide (FTO), or titanium dioxide (TiO 2 ). In an embodiment, the POM is [SiW 12 O 40 ]L 4− ; [α-P 2 W 18 O 62 ] 6− ; or [α 2 -P 2 W 17 O 61 ] 10− . The semiconducting nanoparticles bond to the POM through a combination of electrostatic interactions and hydrogen bonds. The porous transparent electrode can be placed in a protonated form or ion-paired with alkali metal cations or tetraalkylammonium cations.

Dares, Christopher J.↗
DOE OSTI2023

High‐Throughput Screening Assisted Discovery of a Stable Layered Anti‐Ferromagnetic Semiconductor: CdFeP 2 Se 6

Recent advances in 2D magnetism have heightened interest in layered magnetic materials due to their potential for spintronics. In particular, layered semiconducting antiferromagnets exhibit intriguing low-dimensional semiconducting behavior with both charge and spin as carrier controls. However, synthesis of these compounds is challenging and remains rare. Here, first-principles based high-throughput search is conducted to screen potentially stable mixed metal phosphorous trichalcogenides (MM ' P 2 X 6 , where M and M ' are transition metals and X is a chalcogenide) that have a wide range of tunable bandgaps and interesting magnetic properties. Among the potential candidates, a stable semiconducting layered magnetic material, CdFeP 2 Se 6 , that exhibits a short-range antiferromagnetic order at T N = 21 K with an indirect bandgap of 2.23 eV is successfully synthesized . This work suggests that high-throughput screening assisted synthesis can be an effective method for layered magnetic materials discovery.

2D materials↗
DOE OSTI2025

Polymorphs of the n–Type Polymer P(NDI2OD–T2): A Comprehensive Description of the Impact of Processing on Crystalline Morphology and Charge Transport

A systematic study of the polymorphs emerging in P(NDI2OD-T2) (also commercially known as N2200), a prototypical organic semiconducting n-type polymer, is presented. Using a tightly integrated experimental and computational approach, detailed atomistic-level descriptions are provided investigating the three known P(NDI2OD-T2) polymorphs observed at room temperature as a function of thin-film processing. Importantly, over the course of the work, a missing link is uncovered, a fourth polymorph referred to here as Form I-β; this new form is a morphological intermediary observed upon thermal annealing, which evolves from Form I but tends to disappear upon full polymer chain melting. The computationally derived polymorph structures show excellent agreement with experimental X-ray scattering characterization. The relative stabilities of each polymorph are calculated in terms of both the bulk material and the polymorph-air interface. An energy landscape is then constructed to qualitatively compare the thermodynamic versus kinetic origins of each polymorph, and the factors driving (supra)assembly and associated transformations among polymorphs using an approach generalizable to other organic semiconducting polymers. Lastly, the relationships among preferential polymorphic crystallinity, relative chain orientations, and directional charge transport properties in P(NDI2OD-T2) are explored. Altogether, this work provides unprecedented insights into complex structure-processing-transport relationships in a representative semiconducting organic polymer.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Monolayer Vanadium‐Doped Tungsten Disulfide: A Room‐Temperature Dilute Magnetic Semiconductor

Abstract Dilute magnetic semiconductors (DMS), achieved through substitutional doping of spin‐polarized transition metals into semiconducting systems, enable experimental modulation of spin dynamics in ways that hold great promise for novel magneto–electric or magneto–optical devices, especially for two‐dimensional (2D) systems such as transition metal dichalcogenides that accentuate interactions and activate valley degrees of freedom. Practical applications of 2D magnetism will likely require room‐temperature operation, air stability, and (for magnetic semiconductors) the ability to achieve optimal doping levels without dopant aggregation. Here, room‐temperature ferromagnetic order obtained in semiconducting vanadium‐doped tungsten disulfide monolayers produced by a reliable single‐step film sulfidation method across an exceptionally wide range of vanadium concentrations, up to 12 at% with minimal dopant aggregation, is described. These monolayers develop p‐type transport as a function of vanadium incorporation and rapidly reach ambipolarity. Ferromagnetism peaks at an intermediate vanadium concentration of ~2 at% and decreases for higher concentrations, which is consistent with quenching due to orbital hybridization at closer vanadium–vanadium spacings, as supported by transmission electron microscopy, magnetometry, and first‐principles calculations. Room‐temperature 2D‐DMS provide a new component to expand the functional scope of van der Waals heterostructures and bring semiconducting magnetic 2D heterostructures into the realm of practical application.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Fully R2R-Printed Carbon-Nanotube-Based Limitless Length of Flexible Active-Matrix for Electrophoretic Display Application

A limitless-length flexible active-matrix implies that virtually any surface can be rendered into an interactive medium when laminated with electrophoretic or organic light-emitting diode sheets. However, performance, cost, and size limitations of current fabrication technologies and semiconducting materials, typically utilized in thin film transistor (TFT) active matrices (TFT-AMs), have hindered progress, thus preventing the realization of fully printed TFT-AMs on a plastic roll. Here, a new high-purity semiconducting single-walled carbon nanotube (s-SWCNT) ink is prepared by first isolating 99.9% pure s-SWCNTs via conjugated polymer extraction, and then utilizing a ligand-exchange method to formulate a novel hydrophilic gravure-compatible semiconducting ink. Based on the s-SWCNT ink, a fully additive manufacturing process using roll-to-roll (R2R) gravure printing enables the fabrication of a flexible TFT-AM, overcoming performance, cost, and size limitations. TFT-AMs with 10 to 40 PPI resolution where average mobility of 0.23 ± 0.12 cm 2 V –1 s –1 , average on–off ratio of 10 4.1 , and threshold voltage variation of ±13% are attained. As a proof of concept, an inexpensive and flexible electrophoretic display is demonstrated by simply laminating an electrophoretic sheet onto the R2R gravure-printed s-SWCNT-based TFT-AM.

36 MATERIALS SCIENCE↗
DOE OSTI2024

First-Principles Calculations of the Electrical Conductivity of Carbon Nanotubes Functionalized with Copper and Nitrogen: Implications for Electronics, Energy Storage, and Nanodevices

In this work, we investigate the electrical conductivity of carbon nanotubes (CNTs), with a particular focus on the effects of doping. Using first-principles-based approaches, we study the electronic structure, phonon dispersion, and electron–phonon scattering to understand the finite-temperature electrical transport properties in CNTs. Our study covers both prototypical metallic and semiconducting CNTs, with special emphasis on the influence of typical defects such as vacancies and the incorporation of copper or nitrogen, such as pyridinic N, pyrrolic N, graphitic N, and oxidized N. Our theoretical study shows significant improvements in the electrical conduction properties of copper-CNT composites, especially when semiconducting CNTs are functionalized with nitrogen. Doping is found to cause significant changes in the electronic density of states near the Fermi level, which affects the electrical conductivity. Calculations show that certain types of functional groups, such as N-pyrrolic, result in more than 30-fold increase in the conductivity of semiconducting CNTs compared to Cu-incorporated CNTs alone. For metallic CNTs, the conductivity is in agreement with existing experimental data, and our prediction of significant increases in conductivity with N-pyrrolic functional group is consistent with recent experimental results, demonstrating the effectiveness of doping in modifying conductivity. In conclusion, our study provides valuable insight into the electronic properties of doped CNTs and contributes to the development of ultrahigh conductivity CNT composites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Magnetically and optically active edges in phosphorene nanoribbons

Abstract Nanoribbons, nanometre-wide strips of a two-dimensional material, are a unique system in condensed matter. They combine the exotic electronic structures of low-dimensional materials with an enhanced number of exposed edges, where phenomena including ultralong spin coherence times 1,2 , quantum confinement 3 and topologically protected states 4,5 can emerge. An exciting prospect for this material concept is the potential for both a tunable semiconducting electronic structure and magnetism along the nanoribbon edge, a key property for spin-based electronics such as (low-energy) non-volatile transistors 6 . Here we report the magnetic and semiconducting properties of phosphorene nanoribbons (PNRs). We demonstrate that at room temperature, films of PNRs show macroscopic magnetic properties arising from their edge, with internal fields of roughly 240 to 850 mT. In solution, a giant magnetic anisotropy enables the alignment of PNRs at sub-1-T fields. By leveraging this alignment effect, we discover that on photoexcitation, energy is rapidly funnelled to a state that is localized to the magnetic edge and coupled to a symmetry-forbidden edge phonon mode. Our results establish PNRs as a fascinating system for studying the interplay between magnetism and semiconducting ground states at room temperature and provide a stepping-stone towards using low-dimensional nanomaterials in quantum electronics.

Science & Technology - Other Topics↗
DOE OSTI2024

Pressure-induced metallization and loss of surface magnetism in FeSi

Single-crystalline FeSi samples with a conducting surface state were studied under high pressure and magnetic field by means of electrical resistance measurements to explore how the bulk semiconducting state and the surface state are tuned by the application of pressure. Here, we found that the energy gap associated with the semiconducting bulk phase begins to close abruptly at a critical pressure of ~10 GPa and the bulk material becomes metallic with no obvious sign of any emergent phases or non-Fermi liquid behavior in temperature dependent electrical resistance in the neighborhood of the critical pressure above 3 K. Moreover, the metallic phase appears to remain at near-ambient pressure upon release of the pressure. Interestingly, the hysteresis in the electrical resistance vs magnetic field curve associated with the magnetically ordered conducting surface state decreases with pressure and vanishes at the critical pressure, while the slope of the electrical resistance vs magnetic field curve, which has a negative value for pressure below the critical pressure, decreases in magnitude with pressure and changes sign at the critical pressure. Thus the conducting surface state and the corresponding two-dimensional magnetic order collapse at the critical pressure where the energy gap of the bulk material starts to close abruptly, revealing the connection between the conducting surface state and the semiconducting bulk state in FeSi.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Metallization and spin fluctuations in Cu-doped lead apatite

An electronic structure and magnetic properties analysis of the recently proposed Cu-doped lead apatite is performed. Here, we show that electronic structures of differently Cu-substituted structures are characterized by localized molecular Cu-O bands at or near the Fermi level. The Cu substitutions can happen at both Pb1 and Pb2 sites, leading to metallic and semiconducting systems differently. The electronic systems in these bands are highly unstable magnetically and form clusters of rigidly ferromagnetically coupled magnetic moments on Cu and neighboring oxygen atoms with a total moment of about 1µ B . The ground state of uniformly Cu-doped lead apatite appears to be magnetic and semiconducting. The nonuniform distribution of two Cu atoms at the nearest Pb2 sites leads to an antiferromagnetic semiconducting state with formation energy close to uniformly distributed Cu configurations. The inclusion of quantum spin fluctuations confirms the stability of magnetic Cu-O clusters. Our calculations revealed the absence of the long-range magnetic order between uniformly distributed Cu-O clusters, creating the spin glass type of system.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Unconventional gate-induced superconductivity in transition-metal dichalcogenides

Superconductivity in few-layer semiconducting transition-metal dichalcogenides (TMDs) can be induced by field-effect doping through ionic-liquid gating. While several experimental observations have been collected over the years, a fully consistent theoretical picture is still missing. Here we develop a realistic framework that combines the predictive power of first-principles simulations with the versatility and insight of Bardeen-Cooper-Schrieffer gap equations to rationalize such experiments. The multivalley nature of semiconducting TMDs is taken into account, together with the doping- and momentum-dependent electron-phonon and Coulomb interactions. Consistently with experiments, we find that superconductivity occurs when the electron density is large enough that the 𝑄 valleys get occupied, as a result of a large enhancement of electron-phonon interactions. Despite being phonon driven, the superconducting state is predicted to be sensitive to Coulomb interactions, which can lead to the appearance of a relative sign difference between valleys and thus to a 𝑠 +− character. We discuss qualitatively how such scenario may account for many of the observed physical phenomena for which no microscopic explanation has been found so far, including in particular the presence of a large subgap density of states, and the sample-dependent dome-shaped dependence of 𝑇 𝑐 on accumulated electron density. Our results provide a comprehensive analysis of gate-induced superconductivity in semiconducting TMDs, and introduce an approach that will likely be valuable for other multivalley electronic systems, in which superconductivity occurs at relatively low electron density.

2-dimensional systems↗
NASA NTRS1986

Method of making macrocrystalline or single crystal semiconductor material

A macrocrystalline or single crystal semiconductive material is formed from a primary substrate including a single crystal or several very large crystals of a relatively low melting material. This primary substrate is deposited on a base such as steel or ceramic, and it may be formed from such metals as zinc, cadmium, germanium, aluminum, tin, lead, copper, brass, magnesium silicide, or magnesium stannide. These materials generally have a melting point below about 1000 C and form on the base crystals the size of fingernails or greater. The primary substrate has an epitaxial relationship with a subsequently applied layer of material, and because of this epitaxial relationship, the material deposited on the primary substrate will have essentially the same crystal size as the crystals in the primary substrate. If required, successive layers are formed, each of a material which has an epitaxial relationship with the previously deposited layer, until a layer is formed which has an epitaxial relationship with the semiconductive material. This layer is referred to as the epitaxial substrate, and its crystals serve as sites for the growth of large crystals of semiconductive material. The primary substrate is passivated to remove or otherwise convert it into a stable or nonreactive state prior to deposition of the seconductive material.

Shlichta, P. J.↗
NASA NTRS1995

Semiconductor/High-Tc-Superconductor Hybrid ICs

Hybrid integrated circuits (ICs) containing both Si-based semiconducting and YBa(2)Cu(3)O(7-x) superconducting circuit elements on sapphire substrates developed. Help to prevent diffusion of Cu from superconductors into semiconductors. These hybrid ICs combine superconducting and semiconducting features unavailable in superconducting or semiconducting circuitry alone. For example, complementary metal oxide/semiconductor (CMOS) readout and memory devices integrated with fast-switching Josephson-junction super-conducting logic devices and zero-resistance interconnections.

Burns, Michael J.↗
NASA NTRS2001

Electronic and Mechanical Properties of Hydrogen Functionalized Carbon Nanotubes

We examined the electronic and mechanical properties of hydrogen functionalized carbon nanotubes. The functionalization pattern covers two extreme groups. One group has randomly selected functionalization sites including one to twenty percent of the carbon atoms. The other group has regularly patterned functional sites parallel to the tube axis. Metallic, small-gap semiconducting and large-gap semiconducting carbon nanotubes are studied. The results reveal that the electronic properties of the tubes are very sensitive to the degree of functionalization, with even one percent functionalization being enough to render metallic tubes semiconducting. On the other hand, the mechanical properties, like tensile modulus, are much less sensitive to functionalization. For carbon nanotubes functionalized with specific patterns, the electric properties depends strongly on the nature of the functionalization pattern.

Yang, Liu↗
NASA NTRS2006

Carbon-Nanotube Schottky Diodes

Schottky diodes based on semiconducting single-walled carbon nanotubes are being developed as essential components of the next generation of submillimeter-wave sensors and sources. Initial performance predictions have shown that the performance characteristics of these devices can exceed those of the state-of-the-art solid-state Schottky diodes that have been the components of choice for room-temperature submillimeter-wave sensors for more than 50 years. For state-of-the-art Schottky diodes used as detectors at frequencies above a few hundred gigahertz, the inherent parasitic capacitances associated with their semiconductor junction areas and the resistances associated with low electron mobilities limit achievable sensitivity. The performance of such a detector falls off approximately exponentially with frequency above 500 GHz. Moreover, when used as frequency multipliers for generating signals, state-of-the-art solid-state Schottky diodes exhibit extremely low efficiencies, generally putting out only micro-watts of power at frequencies up to 1.5 THz. The shortcomings of the state-of-the-art solid-state Schottky diodes can be overcome by exploiting the unique electronic properties of semiconducting carbon nanotubes. A single-walled carbon nanotube can be metallic or semiconducting, depending on its chirality, and exhibits high electron mobility (recently reported to be approx.= 2x10(exp 5)sq cm/V-s) and low parasitic capacitance. Because of the narrowness of nanotubes, Schottky diodes based on carbon nanotubes have ultra-small junction areas (of the order of a few square nanometers) and consequent junction capacitances of the order of 10(exp -18) F, which translates to cutoff frequency >5 THz. Because the turn-on power levels of these devices are very low (of the order of nano-watts), the input power levels needed for pumping local oscillators containing these devices should be lower than those needed for local oscillators containing state-of-the-art solid-state Schottky diodes.

Manohara, Harish↗
NASA NTRS2011

Separation of Single-Walled Carbon Nanotubes with DEP-FFF

A process using a modified dielectrophoresis device separates single-walled carbon nanotubes (SWNTs) according to their polarizability in electric fields. This depends on the size and dielectric constant of individual nanotubes and easily separates metallic from semiconducting nanotubes. Separation by length has also been demonstrated. Partial separation (enrichment) according to bandgap (which is linked to polarizability) has also been shown and can be improved to full separation of individual types of semiconducting SWNTs with better control over operational parameters and the length of SWNT starting material. This process and device can be scaled affordably to generate useful amounts of semiconducting SWNTs for electronic device development and production. In this study, a flow injection dielectrophoresis technique was used with a modified dielectrophoresis device. The length, width, and height of the modified chamber were 28, 2.5, and 0.025 cm, respectively. On the bottom of the chamber, there are two arrays of 50-m-wide, 2-m-thick gold electrodes, which are connected to an AC voltage generator and are alternately arranged so that every electrode is adjacent to two electrodes of the opposite polar. There is an additional plate electrode on the top of the chamber that is negatively biased. During the experiment, a syringe pump constantly pumps in the mobile phase, 1-percent sodium dodecylbenzene sulfonate (SDBS) solution, into the chamber. The frequency and voltage are set to 1 MHz and 10 V peak-to-peak, respectively. About 150 micro-L of SWNTs in 1- percent SDBS decanted solution are injected to the mobile phase through a septum near the entrance of the chamber. The flow rate of the mobile phase is set to 0.02 cu cm/min. The injected SWNTs sample flows through the chamber before it is lead into a fluorescence flow-through cell and collected for further analysis. The flow-through cell has three windows, thus allowing the fluorometer to collect fluorescence spectrum and visible absorption spectrums simultaneously. Dielectrophoresis field-flow fractionation (DEP-FFF) generally depends on interaction of a sedimentation force and DEP force for particle separation, and SWNTs are neutrally buoyant in water. In this innovation, the third electrode was added to create a sedimentation force based on DC electrophoresis. This makes this particular device applicable to separations on any neutrally buoyant particles in solution and a more general process for a broad range of nanomaterials sorting and separations.

Schmidt, Howard K.↗
NASA NTRS2015

Selenium Interlayer for High-Efficiency Multijunction Solar Cell

A multi junction solar cell is provided and includes multiple semiconducting layers and an interface layer disposed between the multiple semiconducting layers. The interface layer is made from an interface bonding material that has a refractive index such that a ratio of a refractive index of each of the multiple semiconducting layers to the refractive index of the interface bonding material is less than or equal to 1.5.

Landis, Geoffrey A↗