Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “secondary source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Aerosols Optical and Radiative Properties in Indonesia Based on AERONET Version 3

Heterogeneity in seasonal aerosol types due to different sources, local characteristics, and meteorology lead to different optical and radiative properties from one place to another. This study analyzes the long-term averages of aerosol optical and radiative properties obtained by the Aerosol Robotic Network (AERONET) version 3 at four sites in Indonesia representing fire prone areas (Palangka Raya, Pontianak, Jambi: 2012–2020), and urban-industrial (Bandung: 2009–2018). We examined the seasonal variation of aerosol optical depth (AOD), Angstrom Exponent (AE), Precipitable Water Vapor (PWV), and Single Scattering Albedo (SSA) combined with meteorological parameters at these Indonesian sites. Multiple clustering techniques from different relationships among various aerosol optical and radiative parameters was employed to further study the aerosol type in respect to different seasonality. The results exhibited a distinct seasonal pattern at all sites except Bandung, whereas AOD increased owing to forest and peat fire outbreaks during the dry season. The trend in AOD annual depicts an increase in Bandung as emission from urban/industrial increases episodically, while it depicts a decrease at the three biomass burning sites. As AOD increased, Palangka Raya, Pontianak, and Jambi exhibited wider ranges of observed AE (1.2–1.8) and high FMF (>0.8) in the dry burning period (June to October). On the other hand, Bandung has more aerosol distribution in the range of FMF values 0.6–1 and AE 1–1.6, compared with other sites, suggesting contribution of complex aerosol emission from different sources and likely due to the formation of secondary aerosol production from trace gases. Palangka Raya, Pontianak, and Jambi exhibited non-absorbing characteristics, as indicated by high SSA (>0.95), high FMF, and high EAE values (1.2–1.7) with no discrepancy in seasonal patterns, implying that biomass burning aerosols in Indonesia tend to cool the atmosphere with strong scattering rather than absorbing. At Bandung, aerosols mixed with slightly absorbing and non-absorbing aerosols owing to urban and industrial emissions. This study lays a foundation for further research on the contribution of aerosol radiative forcing to climate within the complex aerosol and cloud environments in Indonesia.

Aerosol optical depth↗

Rapid Lightweight Firmware Architecture of the Mobile Metamaterial Internal Co-Integrator Robot

The Mobile Metamaterial Internal Co-Integrator (MMIC-I) is a structure assembly and servicing robot for in-space servicing, assembly, and manufacturing of primary structures and infrastructure. MMIC-I is a battery-powered crawling robot that can travel through periodic structures such as trusses and open framework mechanical metamaterials. It does this through sequences of component extension, contraction, and gripping. This paper provides a detailed discussion of MMIC-I’s lightweight and rapidly developed firmware architecture, to enable demonstration of robot locomotion, secondary operations, and communications with a central command source. The rationale for the lightweight rapid development approach is to allow for assessment of long term system requirements in parallel with the mechatronics development, including optimization of system and subsystem power densities, to inform a future choice of flight ready software frameworks. MMIC-I system computing and I/O requirements are much lower than what is provided by proven baseline computing hardware for existing flight ready software frameworks such as the core Flight System, F prime, and the Robot Operating System. Development of earth gravity ground demonstration of the robotic systems is greatly benefited by limited power and mass factors for computing hardware. Here, we implement inter-process communication, commanding, and telemetry with the Espressif ESP32 module running the Arduino OS.

Damiana Catanoso↗

Actinide cosmic ray chronometers - Relative abundances and the cosmic ray lifetime

Measurements of ultraheavy cosmic rays will provide radioactive chronometers, including the actinides, which are expected to be present in the source. These primary chronometers differ from the Be-10 secondary chronometer in total inelastic cross-section and decay half-life. A propagation code, which includes nuclear fragmentation, radioactive decay, and ionization energy-loss of cosmic rays is being used to investigate the variations in the fluxes and mean ages which would be expected for various models of cosmic ray propagation. Some preliminary results in the actinide region are presented here which indicate that measurements of the relative abundances of the actinides in the cosmic rays will be very useful for understanding source abundances but less useful for studying propagation effects.

Margolis, S. H.↗

Acetone in the atmosphere: Distribution, sources, and sinks

Acetone (CH3COCH3) was found to be the dominant nonmethane organic species present in the atmosphere sampled primarily over eastern Canada (0-6 km, 35 deg-65 deg N) during ABLE3B (July to August 1990). A concentration range of 357 to 2310 ppt (= 10(exp -12) v/v) with a mean value of 1140 +/- 413 ppt was measured. Under extremely clean conditions, generally involving Arctic flows, lowest (background) mixing ratios of 550 +/- 100 ppt were present in much of the troposphere studied. Correlations between atmospheric mixing ratios of acetone and select species such as C2H2, CO, C3H8, C2Cl4 and isoprene provided important clues to its possible sources and to the causes of its atmospheric variability. Biomass burning as a source of acetone has been identified for the first time. By using atmospheric data and three-dimensional photochemical models, a global acetone source of 40-60 Tg (= 10(exp 12) g)/yr is estimated to be present. Secondary formation from the atmospheric oxidation of precursor hydrocarbons (principally propane, isobutane, and isobutene) provides the single largest source (51%). The remainder is attributable to biomass burning (26%), direct biogenic emissions (21%), and primary anthropogenic emissions (3%). Atmospheric removal of acetone is estimated to be due to photolysis (64%), reaction with OH radicals (24%), and deposition (12%). Model calculations also suggest that acetone photolysis contributed significantly to PAN formation (100-200 ppt) in the middle and upper troposphere of the sampled region and may be important globally. While the source-sink equation appears to be roughly balanced, much more atmospheric and source data, especially from the southern hemisphere, are needed to reliably quantify the atmospheric budget of acetone.

Singh, H. B.↗

Kinetics of the Cl(2)P(J)) + CH4 Reaction: Effects of Secondary Chemistry Below 300 K

Absolute rate data for the Cl(2)P(J) + CH4 yields HCl + CH3 reaction have been obtained from 218 to 298 K by using the discharge-flow resonance fluorescence technique at I Torr total pressure. The result at 298 K is (10.1 +/- 0.6) x 10(exp -14) cu cm/molecule/s. The temperature dependence in Arrhenius form is (6.5 +/- 0.9 ) x 10(exp -12) exp[(-1235 +/- 34 )/T]. The errors given are one standard deviation; overall experimental error is estimated at +/- 15%. Because of the relatively large disagreement among earlier measurements at low temperatures, the results were examined for possible effects of non-Boltzmann spin distribution and vibrational excitation of CH4, secondary chemistry of CH3 radicals, and impurities in the CH4 source. There was no significant change in the observed rate constant when an efficient spin quencher, CF4, was added and estimates indicate that vibrational partitioning in CH4 should be at the ambient reactor temperature before the start of the reaction. The results were also independent of the source of Cl atoms (microwave discharge or thermal decomposition of Cl2) and whether CH4 was purified in-situ. However, the observed rate constant did depend on initial Cl atom concentrations and to a lesser extent on CH4 concentrations. Numerical simulations were used to assess the importance of secondary chemistry over a range of reactant concentrations

Wang, J. J.↗

Source Apportionment of Aerosol at a Coastal Site and Relationships with Precipitation Chemistry: A Case Study over the Southeast United States

This study focuses on the long-term aerosol and precipitation chemistry measurements from colocated monitoring sites in Southern Florida between 2013 and 2018. A positive matrix factorization (PMF) model identified six potential emission sources impacting the study area. The PMF model solution yielded the following source concentration profiles: (i) combustion; (ii) fresh sea salt; (iii) aged sea salt; (iv) secondary sulfate; (v) shipping emissions; and (vi) dust. Based on these results, concentration-weighted trajectory maps were developed to identify sources contributing to the PMF factors. Monthly mean precipitation pH values ranged from 4.98 to 5.58, being positively related to crustal species and negatively related to SO42−. Sea salt dominated wet deposition volume-weighted concentrations year-round without much variability in its mass fraction in contrast to stronger seasonal changes in PM2.5 composition where fresh sea salt was far less influential. The highest mean annual deposition fluxes were attributed to Cl−, NO3−, SO42−, and Na+ between April and October. Nitrate is strongly correlated with dust constituents (unlike sea salt) in precipitation samples, indicative of efficient partitioning to dust. Interrelationships between precipitation chemistry and aerosol species based on long-term surface data provide insight into aerosol–cloud–precipitation interactions.

positive matrix factorization↗

SIRTF stray light analysis

The Space Infrared Telescope Facility (SIRTF) is a 1-meter cryogenic infrared telescope. Stray light is kept below the natural background by restrictions on sun, Earth, and moon off-axis angles; by conservative baffle design; by the use of advanced diffuse black coatings; and by superfluid helium cooling. The aperture stop is located at the primary mirror rather than at the secondary mirror to increase the aperture and reduce the central obscuration. Stray light from off-axis sources is greater with the aperture stop at the primary than with the aperture stop at the secondary, but the modulation of the signal produced by tilting of the secondary mirror for chopping is less. Stray light from telescope thermal emission is lower with the aperture stop at the primary.

Elliott, David G.↗

The isotopic composition of iron-group galactic cosmic rays

Results from studies of the isotopic composition of iron group elements in the galactic cosmic radiation are reviewed, emphasizing recently reported measurements from the ISEE-3 spacecraft. The observed isotope distributions for the elements Ti through Mn are in good agreement with those expected for a propagated solar-like source composition, with the possible exception of an enhanced abundance of Ti-50. It is found that a significant fraction of the radioactive secondary nuclide Mn-54 has decayed, indicating a confinement time of iron group cosmic rays in the galaxy of at least 2 Myr. The source ratio Fe-54/Fe-56 is found to be consistent with the solar value, but the ratio Ni-60/Ni-58 is greater than solar by a factor of 2.8+/-1.0. The measured abundance of Co-59 is significantly greater than the calculated secondary contribution, suggesting that this nuclide has been produced in the source regions by the electron capture decay of Ni-59 and implying a time delay between nucleosynthesis and acceleration approximately greater than 10(exp 5) yr.

Wiedenbeck, M. E.↗

1FGL J1417.7-4407: A Likely Gamma-Ray Bright Binary with A Massive Neutron Star and A Giant Secondary

We present multiwavelength observations of the persistent Fermi-Large Area Telescope unidentified gamma-ray source 1FGL J1417.7-4407, showing it is likely to be associated with a newly discovered X-ray binary containing a massive neutron star (nearly 2 solar mass) and a approximately 0.35 solar mass giant secondary with a 5.4 day period. SOAR optical spectroscopy at a range of orbital phases reveals variable double-peaked H alpha emission, consistent with the presence of an accretion disk. The lack of radio emission and evidence for a disk suggests the gamma-ray emission is unlikely to originate in a pulsar magnetosphere, but could instead be associated with a pulsar wind, relativistic jet, or could be due to synchrotron self-Compton at the disk-magnetosphere boundary. Assuming a wind or jet, the high ratio of gamma- ray to X-ray luminosity (approximately 20) suggests efficient production of gamma-rays, perhaps due to the giant companion. The system appears to be a low-mass X-ray binary that has not yet completed the pulsar recycling process. This system is a good candidate to monitor for a future transition between accretion-powered and rotational-powered states, but in the context of a giant secondary.

binaries: spectroscopic aEuro" gamma rays: general↗

Electromechanical Power for NASA Missions

NASA has a wide range of missions that require electrochemical power sources. These needs are met with a variety of options that include primary and secondary cells and batteries, fuel cells, and regenerative fuel cells. This presentation wil cover an overview of NASA missions and requirements for electrochemical power sources and investigate the synergy and diversity that exist between NASA's requirements and those for military tactical power sources. Current development programs at GRC and other NASA centers, aimed at meeting NASA's future requirements will also be discussed.

Manzo, Michelle A.↗

Constraints on galactic distributions of gamma-ray burst sources from BATSE observations

The paradigm that gamma-ray bursts originate from Galactic sources is studied in detail using the angular and intensity distributions observed by the Burst and Transient Source Experiment (BATSE) on NASA's Compton Gamma Ray Observatory (CGRO). Monte Carlo models of gamma-ray burst spatial distributions and luminosity functions are used to simulate bursts, which are then folded through mathematical models of BATSE selection effects. The observed and computed angular intensity distributions are analyzed using modifications of standard statistical homogeneity and isotropy studies. Analysis of the BATSE angular and intensity distributions greatly constrains the origins and luminosities of burst sources. In particular, it appears that no single population of sources confined to a Galactic disk, halo, or localized spiral arm satisfactorily explains BATSE observations and that effects of the burst luminosity function are secondary when considering such models. One family of models that still satisfies BATSE observations comprises sources located in an extended spherical Galactic corona. Coronal models are limited to small ranges of burst luminosity and core radius, and the allowed parameter space for such models shrinks with each new burst BATSE observes. Multiple-population models of bursts are found to work only if (1) the primary population accounts for the general isotropy and inhomogeneity seen in the BATSE observations and (2) secondary populations either have characteristics similar to the primary population or contain numbers that are small relative to the primary population.

Hakkila, Jon↗

Plasma and potential at the lunar surface

The various plasma environments of the moon are described for the lunar orbit through the solar wind and geomagnetic tail. The sources of lunar surface charge, including plasma, photo, and secondary currents, are compared for their expected range of values. The electric potential is calculated from probe theory as a function of local position on the lunar surface; the theory includes plasma environments which are both stationary and flowing. In agreement with several other calculations, the potential at the subsolar point is likely to be a few volts positive. However, for the case when the moon is in the solar wind, the potential is calculated to be a few tens of volts negative at the terminator, and is expected to go to larger negative values on the dark side. If the moon traverses a significant plasma sheet in the geomagnetic tail, then the dark side potential tends toward several kilovolts negative but may be strongly limited by the secondary electron current. Associated surface electric fields are estimated.

Manka, R. H.↗

Preliminary design analysis for the solar optical telescope main mirror actuator

The resolution of the SOT Gregorian telescope was maintained if the conic foci of the elliptical secondary and parabolic primary were made to coincide within plus or minus 38 microns across the prime focus plane and to within 5 microns in focus. An error in coincidence across the focal plane caused all point images to show additional coma with all the comatic tails pointing in the same direction. An error in focus became magnified by the square of the magnification of the secondary and simply increased the diameter of the point source. Offsetting or rastering the sun may be accomplished by swinging the primary in an arc about the point of coincidence of the conic foci so long as the coincidence is kept to within the tolerance stated.

Dunn, R. B.↗

Neutrino, gamma-ray, electron, and positron production in an ultrarelativistic plasma

Neutrino, gamma-ray, electron and positron production resulting from inelastic proton-proton collisions in a highly relativistic plasma such as may exist in extragalactic radio or gamma-ray burst sources is examined. The source functions of primary (pions, kaons, and neutrons) and secondary (photons, electrons, positrons and neutrinos) products of relativistic nuclear collisions are computed for the cases of power law and Maxwellian relativistic proton distributions. It is shown that in plasma which is optically thin to interactions between the plasma and secondary gamma-rays, electrons and positrons, only a small fraction of the initial energy is emitted in the observable form of neutrinos and gamma rays. In an optically thick plasma on the other hand, most of the energy of the relativistic protons is found to be equally divided between gamma rays and neutrinos, although only the neutrinos may escape freely to be observed.

Marscher, A. P.↗

Primary electric power generation systems for advanced-technology engines

The advantages of the all electric airplane are discussed. In the all electric airplane the generator is the sole source of electric power; it powers the primary and secondary flight controls, the environmentals, and the landing gear. Five candidates for all electric power systems are discussed and compared. Cost benefits of the all electric airplane are discussed.

Cronin, M. J.↗

Radiation calculations and comparisons with data

In conjunction with the analysis of data from the Long Duration Exposure Facility (LDEF) ionizing radiation dosimetry, a calculation program was established to aid in data interpretation and to assess the accuracy of current radiation environments and effects models for future mission applications. Initial estimates of LDEF exposure to trapped, galactic, and atmospheric (albedo) radiation sources were made, and the radiation environment (primary and secondary particle spectra) and several radiation effects (induced radioactivity and dose) for varying amounts of LDEF shielding were calculated for a simplified LDEF mass model. Preliminary comparisons of the calculated results were made with the induced radioactivity measurements for several LDEF parts and with preliminary dose data from several experiments (P0004, P0006, and M0004). Predictions were compared with the radioactivity induced in the aluminum clamps holding the experiment trays and in the stainless steel trunnions to test a recently developed theory of trapped proton anisotropy.

Armstrong, T. W.↗

Straylight comparison of SIRTF designs with different aperture stop locations

The APART/PADE program is used to examine whether the SIRTF aperture stop can be moved back to the primary mirror without jeopardizing the requirement for natural background-limited observations. The straylight performance of the baseline design, which has the aperture stop at the secondary mirror, is compared to that of a revised design with the stop at the primary mirror. Both designs include reimaging optics and a LYOT stop, as well as a chopping secondary mirror. The straylight due to off-axis sources and telescope thermal emission is investigated at 50 and 550 microns. It is found that in SIRTF, where every instrument will include reimaging optics and a LYOT stop, the aperture stop may be moved to the primary mirror with modest degradation of the straylight performance.

Dinger, Ann S.↗

An Aerodynamic Analysis of a Mixed Flow Turbine

The aerodynamic performance of a high-work Mixed Flow Turbine (MFT) is computed and compared with experimental data. A three dimensional (3-D) viscous analysis is applied to the single stage MFT geometry with a relatively long upstream transition duct. Predicted vane surface static pressures and circumferentially averaged spanwise quantities at stator and rotor exits agree favorably with data. Compared to the results of axisymmetric flow analysis from design intent, the 3-D computation agrees much better especially in the endwall regions where throughflow prediction fails to assess the loss mechanism properly. Potential sources of performance loss such as tip leakage and secondary flows are also properly captured by the analysis.

Kim, Chan M.↗