Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “secondary electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Dione: A Pathfinder Mission for Understanding the Iono-sphere-Thermosphere Responses to Magnetospheric Forcing

Dione is a NASA small satellite prototype for future constellations that in different configurations will provide global and localized measurements of Ionosphere-Thermosphere responses to Magnetospheric energy input in a variety of scales, enabling their better forecast and prediction. This is done with a comprehensive sensor package which includes four instruments: a miniaturized fluxgate magnetometer providing magnetic field measurements with two sensor heads, an ion sensor that measures vector plasma drifts and deduce the in-situ electric fields, an electrostatic analyzer that measures precipitating electrons and up-going secondary electrons, and a neutral mass spectrometer measuring total neutral density and composition. Dione is 3-axis stabilized in a circular low-earth (400-600 km), high-inclination orbit, traversing the auroral precipitation and high latitude currents in every orbit. This paper focuses on the mission-level architecture, but provides contextual information on the science objectives, instruments, and space-craft.

Jaime Esper↗

Earth's Most Powerful Natural Particle Accelerator

Thunderstorms launch antimatter, gamma rays, and highly energetic electrons and neutrons to the edge of space. This witches' brew of radiation is generated at the edge of the stratopause, by the strong electric fields associated with lightning discharges. In less than a quarter millisecond, an explosive feedback process takes an initial seed population of electrons, perhaps produced by cosmic rays from dying stars, and amplifies them a billion billion-fold in the rarefied air over high altitude thunderheads. The electrons generate gamma radiation as they travel through the stratosphere and lower mesosphere, momentarily brighter and of harder spectrum than cosmic gamma ray bursts. These electrons ultimately are absorbed by the atmosphere, but the gamma rays continue on, into the upper reaches of the atmosphere, where they in turn generate a new population of electrons, positrons, and energetic neutrons. These secondary electrons and positrons move along the magnetic field, and can reach near-earth space, streaming through the inner radiation belts, and possibly contributing to the trapped populations there. First postulated by Wilson in 1925, and serendipitously discovered by the Compton Gamma Ray Observatory in 1994 [Fishman et al.], these events, known as "Terrestrial Gamma ray Flashes" (TGFs), represent the most intense episodes of particle acceleration on or near the Earth, resulting in electrons with energies up to 100 MeV. Recent observations by the RHESSI [Smith et al., 2004], Fermi [Briggs et al., 2010], and AGILE [Tavani et al., 2011] satellites, and theoretical and computational modeling, have suggested that the relativistic runaway electron avalanche (RREA) mechanism [Gurevich, 1992], and important modifications, such as the relativistic feedback discharge (RFD) model [Dwyer 2012] can best explain the observations at present. In these models, strong thunderstorm electric fields drive seed electrons, generated from cosmic ray interactions, into a runaway discharge, in which the seed electrons continually gain energy from the electric field, creating a host of secondaries as they interact with the background atmospheric gas. The feedback mechanisms include backwards-propagating positrons and gamma rays, which then can generate new "seed" electrons at the base of the acceleration region, and themselves generate further avalanche chain reactions, greatly amplifying the initial seed population. All these processes happen in the stratosphere, in the altitude range near 15-20 km, where the electric fields and mean free paths are appropriate to allow the discharge to develop.

Rowland, Doug↗

Low Energy Precipitating Electrons in the Diffuse Aurorae

Auroral electron precipitation is often classified into three categories: diffuse, monoenergetic,and broadband. However, some precipitating electrons do not fit any of the three categories, which areassumed to be "diffuse" electrons for convenience. Many of these nonconforming electrons exhibit highfluxes at low energies. Most studies assume that the precipitating electrons originate from themagnetosphere. However, this primary precipitation is only the first step in the formation of the electronprecipitation. The primary precipitation creates secondary electrons and both electron populations bouncemany times between the conjugate points. Thus, the full electron precipitation consists of not only theprimary but the Multiply Reflected Primary and Secondary (MRPS) electrons. The MRPS electrons aremodeled with Superthermal Electron Transport model. The modeldata comparisons suggest that the lowenergy electrons in the nonconforming precipitating electrons can be attributed to MRPS electrons.

Wing, Simon↗

Nonthermal electron-positron pair production and the 'universal' X-ray spectrum of active galactic nuclei

A nonthermal model for power-law X-ray and gamma-ray sources is considered. An initial, primary distribution of relativistic electrons is injected and cooled via Compton scattering of soft photons (produced either externally or by the synchrotron mechanism). The scattered photons, constituting a primary gamma-ray source, produce electron-positron pairs that act as a secondary electron injection, which in turn produce a secondary photon spectrum. Pairs formed by a part of the photon spectrum optically thin to pair production are taken into account. The distribution of particles and photons is obtained, and numerical results as well as analytical solutions to certain special cases are presented. For the case of a delta-function primary electron injection it is found that the photon spectrum in the X-ray region is well approximated by a power law, with the energy spectral index alpha(X) lying in the relatively narrow range 0.5-0.9 as the compactness parameter L(x)/R (where L(x) is the X-ray luminosity and R is the source radius) varies over many orders of magnitude. This is proposed as a possible mechanism to explain the universal X-ray spectra observed from active galactic nuclei.

Zdziarski, A. A.↗

Production of low-energy cosmic-ray electrons.

Production of low energy cosmic ray electrons, investigating energy inputs to injected secondary electrons by possible low magnitude solar electric field and possible galactic Fermi acceleration

COSMIC RADIATION↗

D-Band EPR and ENDOR Spectroscopy of 15 N-Labeled Photosystem I

For billions of years, nature has optimized the photosynthetic machinery that converts light energy into chemical energy. Key primary reactions of photosynthesis occur in large membrane protein-cofactor complexes. The light-induced sequential electron transfer reactions occur through a chain of donor/acceptor cofactors embedded in the protein matrix resulting in a long-lived transmembrane charge-separated state. EPR is the method of choice to study electron transfer and the interaction of protein environment with redox-active cofactors. However, the spectra of organic cofactor radicals typically are not fully resolved and severely overlap at conventional X-band EPR. Even at Q-band EPR, this overlap is present and often a serious problem. As a result, there is a large variation of the reported EPR data and limited understanding of electronic structures of several redox-active cofactors. These serious problems can often be overcome by the excellent spectral resolution provided by high-frequency EPR (HF EPR). In this work, we study the electronic structure of the primary electron donor P 700 and the secondary electron acceptor A 1 of Photosystem I (PSI) using 130 GHz (D-band) EPR and Electron-Nuclear-Double-Resonance (ENDOR) spectroscopy. PSI was isotopically labeled with 15 N (I = $\frac{1/2}$) to avoid quadrupolar interactions in the most abundant nitrogen isotope 14 N (I = 1) and simplify the ENDOR spectra. ENDOR spectroscopy is central for determining the hyperfine coupling of nitrogen atoms of the two chlorophyll molecules comprising oxidized P 700 and the involvement of protein nitrogen atoms with reduced A 1 . While HF ENDOR of A 1 - allows identification of two nitrogen atoms, HF ENDOR of P 700 + still does not permit unique assignment of the recorded hyperfine couplings.

15N↗

Examination of oxide scales in the SEM using backscattered electron images

The complementary use of the scanning electron microscope in the backscattered electron mode with the more usual secondary electron mode results in a significant increase in the versatility of the instrument, since regions of different chemical composition can be readily detected, and their morphology examined. The use of this technique to examine complex oxide scales formed on heat-resistant alloys is described, and in particular the location of thoria particles in the scale formed on a Ni-20 wt pct Cr-2.3 wt pct ThO2 alloy, and the examination of the behavior of yttrium during the high-temperature oxidation of a Co-Cr-Al-Y alloy are discussed.

Price, C. W.↗

Galactic gamma radiation from cosmic rays concentrated in spiral arms

Extending the model proposed by Bignami et al. (1975), and by Fichtel et al. (1975a) for the production of the galactic high energy gamma ray distribution observed by SAS-2 to lower energies indicates the radiation is dominated by the bremsstrahlung emission of cosmic ray electrons traversing the interstellar gas. Although secondary electrons contribute only about 15% to the 10-30 MeV gamma ray emission in the solar vicinity, their contribution in the model is proportional to the third power of N, where N(r, gal. long., gal. lat.) is the total interstellar gas density, as compared to the square of N for the case of the primary components, and hence their relative importance increases in high density regions. Gamma-ray observations at these energies when compared to those at high energies (above 100 MeV) may provide a means for mapping the ratio of cosmic ray electrons to nucleons throughout the galaxy without the necessity of invoking models for the galactic magnetic field.

Kniffen, D. A.↗

Electron reflection and secondary emission characteristics of sputter-textured pyrolytic graphite surfaces

Low secondary and reflected primary electron emission from the collector electrode surfaces is important for optimum collector efficiency and hence for high overall efficiency of microwave amplifier tubes used in communication satellites and in military systems. Ion sputter texturing of the surface effectively suppresses electron emission from pyrolytic graphite, which is a promising collector electrode material. Secondary and reflected primary electron emission characteristics of sputter textured pyrolytic graphite surfaces with microstructures of various sizes and densities are presented. The microstructure with the lowest electron emission levels, less than those of soot, consists of a dense array of tall, thin spires.

Wintucky, E. G.↗

Three-dimensional calculation of shuttle charging in polar orbit

The charged particles environment in polar orbit can be of sufficient intensity to cause spacecraft charging. In order to gain a quantitative understanding of such effects, the Air Force is developing POLAR, a computer code which simulates in three dimensions the electrical interaction of large space vehicles with the polar ionospheric plasma. It models the physical processes of wake generation, ambient ion collection, precipitating auroral electron fluxes, and surface interactions, including secondary electron generation and backscattering, which lead to vehicle charging. These processes may be followed dynamically on a subsecond timescale so that the rapid passage through intense auroral arcs can be simulated. POLAR models the ambient plasma as isotropic Maxwellian electrons and ions (0+, H+), and allows for simultaneous precipitation of power-law, energetic Maxwellian, and accelerated Gaussian distributions of electrons. Magnetic field effects will be modeled in POLAR but are currently ignored.

Cooke, D. L.↗

Mechanism for nearly ohmic behavior in annealed Au/n-GaAs Schottky diodes

The mechanism of the ohmic behavior commonly observed after annealing Au/n-GaAs 110-oriented Schottky diodes was investigated using electron-beam-induced current (EBIC) measurements, secondary electron imaging (SEI), and SEM and TEM observations. The results showed that the ohmic behavior of annealed Schottky diodes originates from a shunt current pathway at the diode periphery. The SEI, EBIC, and electrical measurements indicated that the ohmic leakage current is due to the surface recombinations at the exposed surface of GaAs between elongated Au crystallites.

Leon, R. P.↗

A Laboratory Study of the Charging/Discharging Mechanisms of a Dust Particle Exposed to an Electron Beam

The interaction of micron sized particles or "dust particles" with different space and planetary environments has become an important area of research. One particular area of interest is how dust particles interact with plasmas. Studies have shown that charged dust particles immersed in plasmas can alter plasma characteristics, while ions and electrons in plasmas can affect a particle's potential and thereby, its interaction with other particles. The basis for understanding these phenomena is the charging mechanisms of the dust particle, specifically, how the particle's charge and characteristics are affected when exposed to ions and electrons. For example, when electrons collide with a dust particle, secondary electrons can be produced from the surface of a particle and can affect the surrounding plasma.

Venturini, C.C.↗

In situ liquid SEM imaging analysis revealing particle dispersity in aqueous solutions

A quantitative description on dispersity of boehmite (γ-AlOOH) particles, a key component for waste slurry at Hanford sites, can provide useful knowledge for understanding various physicochemical nature of the waste. In this work, in situ liquid scanning electron microscopy (SEM) was used to evaluate the dispersity of particles in aqueous conditions using a microfluidic sample holder, System for Analysis at Liquid Vacuum Interface (SALVI). Secondary electron (SE) images and image analyses were performed to determine particle centroid locations and the distance to the nearest neighbour particle centroid, providing reliable rescaled interparticle distances as a function of ionic strength in acidic and basic conditions. Our finding of the particle dispersity is consistent with physical insights from corresponding particle interactions under physicochemical conditions, demonstrating delicate changes in dispersity of boehmite particles based on novel in situ liquid SEM imaging and analysis.

47 OTHER INSTRUMENTATION↗

Particle signal considerations for isotope ratio analysis with single particle multi-collector inductively coupled plasma mass spectrometry

Particle analysis has benefitted from the advent of single particle inductively coupled plasma-mass spectrometry (spICP-MS) due to its robustness, sensitivity, and high-throughput nature. Previous methods of spICP-MS have typically utilized quadrupole or time-of-flight mass analyzers and therefore employ electron multiplier-based detectors (such as secondary electron multipliers or microchannel plates). However, to obtain precise measurements on elemental or isotopic ratios within individual particles, multi-collector ICP-MS (MC-ICP-MS) can be used. Here, we investigate Ce isotope ratios, specifically 142 Ce/ 140 Ce, by spMC-ICP-MS using an all-Faraday cup collector array. Using 1 μm (diameter) cerium dioxide particles, integration times of the Faraday cup detectors were varied from 50–500 ms. The signal from the cerium isotopes in the particles was used to determine isotope ratios, which closely matched the expected natural isotopic abundances. Due to the signal decay response from the Faraday cups, the signal from particles lasts much longer than the expected 1–2 ms (up to 100 s of ms). To explore this effect on isotope ratio analysis, multiple ratio analysis methods were used to determine how to obtain optimal precision and accuracy. Relative differences were around 2% for methods that calculated isotope ratios from summing the total signal of an individual particle before calculating the ratio (rather than using every data point individually). It was found that summing all data points per particle, or integrating under the signal peak, yielded both accurate and precise isotope ratios within the particle population. Particles were also sampled off a solid substrate via microextraction, and isotope ratios were determined with relative differences of 0.13% to 9%. This demonstrates the ability to use spMC-ICP-MS to obtain isotope ratios on particles, with little to no relative difference in comparison to the expected ratio, even when operating Faraday detectors at fast 50 ms integration times.

Szakas, Sarah E. [Oak Ridge National Laboratory (O↗

Computing the Paschen curve for argon with speed-limited particle-in-cell simulation

Upon inclusion of collisions, the speed-limited particle-in-cell (SLPIC) simulation method successfully computed the Paschen curve for argon. The 1D3V simulations modeled an electron cascade across an argon-filled capacitor, including electron-neutral ionization, electron-neutral elastic collisions, electron-neutral excitation, and ion-induced secondary electron emission. In electrical breakdown, the timescale difference between ion and electron motion makes traditional PIC methods computationally slow. To decrease this timescale difference and speed up computation, here we used SLPIC, a time-domain algorithm that limits the speed of the fastest electrons in the simulation. The SLPIC algorithm facilitates a straightforward, fully kinetic treatment of dynamics and collisions. SLPIC was as accurate as PIC, but ran up to 200 times faster. SLPIC accurately computed the Paschen curve for argon over three orders of magnitude in pressure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Solar and geomagnetic modulation of low-energy secondary cosmic ray electrons.

Balloon exposures of hodoscope instruments at Churchill, Manitoba; Minneapolis, Minnesota; and Sioux Falls, South Dakota, have established that the flux of return albedo electrons does not depend upon launch latitude and varies with solar modulation in proportion to the intensity of atmospheric secondary electrons. Only one flight out of 21 showed any indication of a magnetospheric electron flux significantly in excess of that attributable to albedo. Diurnal changes in geomagnetic cutoffs exhibit marked variability from day to day, as was illustrated by one flight in which a low cutoff was observed at Churchill throughout the daytime hours. The intensity increase of 15- to 65-MeV primary cosmic ray electrons due to solar modulation was no more than a factor of 2 from 1969-1970 to 1971.

Luhmann, J. G.↗