Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sas”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Bayesian inference of anisotropic 2D small-angle scattering from sparse measurement

Here, we present a Bayesian inference framework for reconstructing anisotropic two-dimensional small-angle scattering (2D SAS) patterns from sparse, noisy, or partially missing data. The method combines a symmetry-aware angular basis with radial Gaussian process priors to enable accurate, training-free interpolation and denoising. Computational benchmarks demonstrate reliable recovery of both isotropic and high-order anisotropic features under severe data reduction. Experimental validations on stretched polymers, sheared wormlike micelles, and carbon fibers show improved fidelity and resolution compared to raw measurements, achieving comparable accuracy with up to 50-fold fewer detected neutrons. This approach enables quantitative structural analysis under low-flux, time-limited, or single-shot conditions, extending the applicability of 2D SAS techniques to compact neutron sources and mechanically driven soft matter systems undergoing transient structural changes.

Tung, Chi-Huan [Oak Ridge National Laboratory (ORN↗

No Evidence of Increased Survival or Decreased Straying from Acclimating Subyearling Fall Chinook Salmon to Release Locations in the Umatilla River of Oregon

Abstract Smolt-to-adult survival (SAS) and straying of subyearling fall Chinook Salmon Oncorhynchus tshawytscha that were acclimated in waters of their release site before river release was compared with those of fish that were transported to the river and released directly into the river. Results showed that there were no differences in average SAS, which was 0.08% for both acclimated and direct-release groups, or straying, which averaged 33.8% and 35.3% for direct and acclimated release groups, respectively. We conclude that an acclimation period may not improve these metrics in subyearling-released salmon. Received June 19, 2015; accepted October 31, 2015

Clarke, Lance R.↗

Design and Implementation of Surface Eroding Thermocouples for Stage-One Modular Divertor Integration at the DIII-D Tokamak

The DIII-D has upgraded its upper divertor to a modular system using copper alloy pedestals to alter the divertor geometry without changing the vessel structure. Six new graphite tiles were designed for the shape and volume rise (SVR) divertor. Here, these new SVR tiles facilitated the formation of a poloidal array of 27 surface eroding thermocouples (SETCs) in the upper divertor region. At one location, a specialized recessed SETC, paired with a standard flush SETC, was installed in one of the ceiling tiles to provide comprehensive heat flux measurements, distinguishing between charged and noncharged particle contributions. Upgrades were made to the SETC system in the small-angle slot (SAS) divertor to improve overall performance. These upgrades included optimizing the feedthrough system to double the thermocouple cable capacity and reallocating cables from the SAS area to the SVR divertor. A compact isolation amplifier system with a fixed gain of 41 was employed to improve the signal level and minimize interference. Additionally, two analog-to-analog fiber systems were implemented for transmitting thermocouple signals over a single fiber, significantly reducing both noise levels and costs. The newly installed SETCs in the SVR divertor successfully completed initial commissioning testing. The SETCs captured the in-out asymmetry in the power distribution between the inner and outer strike points and demonstrated the dependency of the heat flux profile on the outer strike point location. During divertor detachment, heat flux mitigation was noted at the outer strike point location, while significant heat flux contributions from neutral particles were measured in the SVR divertor.

Divertor↗

TIDALLY HEATED TERRESTRIAL EXOPLANETS: VISCOELASTIC RESPONSE MODELS

Tidal friction in exoplanet systems, driven by orbits that allow for durable nonzero eccentricities at short heliocentric periods, can generate internal heating far in excess of the conditions observed in our own solar system. Secular perturbations or a notional 2:1 resonance between a hot Earth and hot Jupiter can be used as a baseline to consider the thermal evolution of convecting bodies subject to strong viscoelastic tidal heating. We compare results first from simple models using a fixed Quality factor and Love number, and then for three different viscoelastic rheologies: the Maxwell body, the Standard Anelastic Solid (SAS), and the Burgers body. The SAS and Burgers models are shown to alter the potential for extreme tidal heating by introducing the possibility of new equilibria and multiple response peaks. We find that tidal heating tends to exceed radionuclide heating at periods below 10-30 days, and exceed insolation only below 1-2 days. Extreme cases produce enough tidal heat to initiate global-scale partial melting, and an analysis of tidal limiting mechanisms such as advective cooling for earthlike planets is discussed. To explore long-term behaviors, we map equilibria points between convective heat loss and tidal heat input as functions of eccentricity. For the periods and magnitudes discussed, we show that tidal heating, if significant, is generally detrimental to the width of habitable zones.

79 ASTRONOMY AND ASTROPHYSICS↗

EARLY-TYPE GALAXIES AT z = 1.3. I. THE LYNX SUPERCLUSTER: CLUSTER AND GROUPS AT z = 1.3. MORPHOLOGY AND COLOR-MAGNITUDE RELATION

We confirm the detection of three groups in the Lynx supercluster, at z Almost-Equal-To 1.3, through spectroscopic follow-up and X-ray imaging, and we give estimates for their redshifts and masses. We study the properties of the group galaxies compared to the two central clusters, RX J0849+4452 and RX J0848+4453. Using spectroscopic follow-up and multi-wavelength photometric redshifts, we select 89 galaxies in the clusters, of which 41 are spectroscopically confirmed, and 74 galaxies in the groups, of which 25 are spectroscopically confirmed. We morphologically classify galaxies by visual inspection, noting that our early-type galaxy (ETG) sample would have been contaminated at the 30%-40% level by simple automated classification methods (e.g., based on Sersic index). In luminosity-selected samples, both clusters and groups show high fractions of bulge-dominated galaxies with a diffuse component that we visually identified as a disk and which we classified as bulge-dominated spirals, e.g., Sas. The ETG fractions never rise above Almost-Equal-To 50% in the clusters, which is low compared to the fractions observed in other massive clusters at z Almost-Equal-To 1. In the groups, ETG fractions never exceed Almost-Equal-To 25%. However, overall bulge-dominated galaxy fractions (ETG plus Sas) are similar to those observed for ETGs in clusters at z {approx} 1. Bulge-dominated galaxies visually classified as spirals might also be ETGs with tidal features or merger remnants. They are mainly red and passive, and span a large range in luminosity. Their star formation seems to have been quenched before experiencing a morphological transformation. Because their fraction is smaller at lower redshifts, they might be the spiral population that evolves into ETGs. For mass-selected samples of galaxies with masses M > 10{sup 10.6} M{sub Sun} within {Sigma} > 500 Mpc{sup -2}, the ETG and overall bulge-dominated galaxy fractions show no significant evolution with respect to local clusters, suggesting that morphological transformations might occur at lower masses and densities. The ETG mass-size relation shows evolution toward smaller sizes at higher redshift in both clusters and groups, while the late-type mass-size relation matches that observed locally. When compared to the clusters, the group ETG red sequence shows lower zero points (at {approx}2{sigma}) and larger scatters, both expected to be an indication of a younger galaxy population. However, we show that any allowed difference between the age in groups and clusters would be small when compared to the differences in age in galaxies of different masses.

79 ASTRONOMY AND ASTROPHYSICS↗

ELM sputter erosion modeling of a tungsten coated small angle slot divertor in DIII-D

We modeled plasma edge localized mode (ELM) sputter erosion for a Small Angle Slot divertor with a tungsten coated region (SAS-VW), designed for experiments in the DIII-D tokamak, and proposed for use in future advanced tokamaks. The simulations use a free-streaming, 1000 eV, C +6 and D +1 ELM impingement model, with SOLPS-ITER, ITMC-DYN, and REDEP/WBC code packages for background plasma, material response, and erosion/redeposition respectively. The results show ELM'ing plasma gross and net tungsten erosion fluxes of the mixed-material C/W surface peaking at the slot entrance region, and an order of magnitude higher than for non-ELMs. The per-pulse erosion, however, remains low, of order 0.5 nm, due to expected moderate ELM frequencies and duration in DIII-D. Here, the ELMs result in a ~25x higher peak sputtered W current leaving the divertor slot region, towards the core plasma, compared to the ELM-free plasma case. The time-integrated escape current, however, may not significantly affect core plasma high-Z contamination concerns, for a 1% ELM duty factor, but may be an issue for higher frequency ELMs. In general, the modeling results appear favorable for effective testing of the SAS-VW divertor in DIII-D, and extrapolation to innovative divertor designs in future ITER-like and DEMO fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A discontinuous Galerkin method for general relativistic hydrodynamics in thornado

Discontinuous Galerkin (DG) methods provide a means to obtain high-order accurate solutions in regions of smooth fluid flow while still resolving strong shocks. These and other properties make DG methods attractive for solving problems involving hydrodynamics; e.g., the core-collapse supernova problem. With that in mind we are developing a DG solver for the general relativistic, ideal hydrodynamics equations under a 3+1 decomposition of spacetime, assuming a conformally-flat approximation to general relativity. With the aid of limiters we verify the accuracy and robustness of our code with several difficult test-problems: a special relativistic Kelvin-Helmholtz instability problem, a two-dimensional special relativistic Riemann problem, and a one- and two-dimensional general relativistic standing accretion shock (SAS) problem. We find good agreement with published results, where available. We also establish sufficient resolution for the 1D SAS problem and find encouraging results regarding the standing accretion shock instability (SASI) in 2D.

Dunham, Samuel↗

Irena : tool suite for modeling and analysis of small-angle scattering.

Irena, a tool suite for analysis of both X-ray and neutron small-angle scattering (SAS) data within the commercial Igor Pro application, brings together a comprehensive suite of tools useful for investigations in materials science, physics, chemistry, polymer science and other fields. In addition to Guinier and Porod fits, the suite combines a variety of advanced SAS data evaluation tools for the modeling of size distribution in the dilute limit using maximum entropy and other methods, dilute limit small-angle scattering from multiple non-interacting populations of scatterers, the pair-distance distribution function, a unified fit, the Debye-Bueche model, the reflectivity (X-ray and neutron) using Parratt's formalism, and small-angle diffraction. There are also a number of support tools, such as a data import/export tool supporting a broad sampling of common data formats, a data modification tool, a presentation-quality graphics tool optimized for small-angle scattering data, and a neutron and X-ray scattering contrast calculator. These tools are brought together into one suite with consistent interfaces and functionality. The suite allows robust automated note recording and saving of parameters during export.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Fundamental mechanistic insights into the catalytic reactions of Li-S redox by Co single-atom electrocatalysts via operando methods

Lithium-sulfur batteries represent an attractive option for energy storage applications. A deeper understanding of the multistep lithium-sulfur reactions and the electrocatalytic mechanisms are required to develop advanced, high-performance batteries. We have systematically investigated the lithium-sulfur redox processes catalyzed by a cobalt single-atom electrocatalyst (Co-SAs/NC) via operando confocal Raman microscopy and x-ray absorption spectroscopy (XAS). The real-time observations, based on potentiostatic measurements, indicate that Co-SAs/NC efficiently accelerates the lithium-sulfur reduction/oxidation reactions, which display zero-order kinetics. Under galvanostatic discharge conditions, the typical stepwise mechanism of long-chain and intermediate-chain polysulfides is transformed to a concurrent pathway under electrocatalysis. In addition, operando cobalt K-edge XAS studies elucidate the potential-dependent evolution of cobalt’s oxidation state and the formation of cobalt-sulfur bonds. Our work provides fundamental insights into the mechanisms of catalyzed lithium-sulfur reactions via operando methods, enabling a deeper understanding of electrocatalysis and interfacial dynamics in electrical energy storage systems.

36 MATERIALS SCIENCE↗

Nanoparticle shape reconstruction by solving the direct and inverse small-angle scattering problems for a unit potential localized inside a torus

The simplest doubly connected surface of revolution (torus) is used as an example to demonstrate the possibility of stable reconstruction a three-dimensional homogeneous body defined by a unit potential U(r) using a spherically averaged small-angle scattering (SAS) curve I(s). Annealing Monte Carlo simulations are performed without using prior information about nanoparticle shape and size. Exact and approximate expressions are obtained for the form factor of a torus. It is shown graphically that the exact and approximate SAS form-factor curves agree for an experimentally accessible scattering region. Examples are given.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Materials Data on AsS by Materials Project

SAs crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four SAs clusters. there are four inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.27–2.30 Å. In the second As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.27 Å) and one longer (2.29 Å) As–S bond lengths. In the third As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.26 Å) and one longer (2.30 Å) As–S bond lengths. In the fourth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.21 Å. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the second S2- site, S2- is bonded in an L-shaped geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on AsS by Materials Project

SAs is High Pressure (4-7GPa) Tellurium-like structured and crystallizes in the monoclinic P2_1/c space group. The structure is zero-dimensional and consists of four SAs clusters. there are four inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a distorted trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.28–2.30 Å. In the second As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.27 Å) and one longer (2.30 Å) As–S bond lengths. In the third As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.22 Å. In the fourth As2+ site, As2+ is bonded in a water-like geometry to two S2- atoms. There are one shorter (2.27 Å) and one longer (2.30 Å) As–S bond lengths. There are four inequivalent S2- sites. In the first S2- site, S2- is bonded in an L-shaped geometry to two As2+ atoms. In the second S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on AsS by Materials Project

SAs crystallizes in the orthorhombic Cmc2_1 space group. The structure is one-dimensional and consists of two SAs ribbons oriented in the (0, 0, 1) direction. there are two inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a 6-coordinate geometry to six S2- atoms. There are a spread of As–S bond distances ranging from 2.44–2.93 Å. In the second As2+ site, As2+ is bonded in an L-shaped geometry to two S2- atoms. There are one shorter (2.29 Å) and one longer (2.36 Å) As–S bond lengths. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded to four As2+ atoms to form distorted corner-sharing SAs4 trigonal pyramids. In the second S2- site, S2- is bonded in a 2-coordinate geometry to three As2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on AsS by Materials Project

SAs crystallizes in the orthorhombic Pca2_1 space group. The structure is zero-dimensional and consists of four SAs clusters. there are eight inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a distorted trigonal non-coplanar geometry to three S2- atoms. There are one shorter (2.28 Å) and two longer (2.33 Å) As–S bond lengths. In the second As2+ site, As2+ is bonded in a trigonal non-coplanar geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.28–2.33 Å. In the third As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.27 Å. In the fourth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.27 Å. In the fifth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.28 Å. In the sixth As2+ site, As2+ is bonded in a single-bond geometry to one S2- atom. The As–S bond length is 2.28 Å. In the seventh As2+ site, As2+ is bonded in a 3-coordinate geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.27–2.37 Å. In the eighth As2+ site, As2+ is bonded in a 3-coordinate geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.26–2.37 Å. There are eight inequivalent S2- sites. In the first S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the second S2- site, S2- is bonded in an L-shaped geometry to two As2+ atoms. In the third S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fourth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the fifth S2- site, S2- is bonded in an L-shaped geometry to two As2+ atoms. In the sixth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the seventh S2- site, S2- is bonded in a water-like geometry to two As2+ atoms. In the eighth S2- site, S2- is bonded in a water-like geometry to two As2+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on AsS by Materials Project

SAs crystallizes in the orthorhombic Cmc2_1 space group. The structure is two-dimensional and consists of two SAs sheets oriented in the (0, 0, 1) direction. there are two inequivalent As2+ sites. In the first As2+ site, As2+ is bonded in a distorted trigonal non-coplanar geometry to three S2- atoms. There are one shorter (2.22 Å) and two longer (2.39 Å) As–S bond lengths. In the second As2+ site, As2+ is bonded in a T-shaped geometry to three S2- atoms. There are a spread of As–S bond distances ranging from 2.39–2.82 Å. There are two inequivalent S2- sites. In the first S2- site, S2- is bonded in a 3-coordinate geometry to three As2+ atoms. In the second S2- site, S2- is bonded in a distorted T-shaped geometry to three As2+ atoms.

36 MATERIALS SCIENCE↗

Ground Motion and Intraevent Variability from 3D Deterministic Broadband (0-7.5 Hz) Simulations along a Nonplanar Strike-Slip Fault

In the article, we model deterministic broadband (-7.5 Hz) ground motion from an M w 7.1 bilateral strike-slip earthquake scenario with dynamic rupture propagation along a rough-fault topography embedded in a medium including small-scale velocity and density perturbations. Spectral accelerations (SAs) at periods 0.2-3 s and Arias intensity durations show a similar distance decay (at the level of 1-2 interevent standard deviations above the median) when compared to Next Generation Attenuation-West2 (NGA)-West2 ground-motion prediction equations (GMPEs) using a Q(f) power-law exponent of 0.6-0.8 above 1 Hz in models with a minimum V S of 750 m/s. With a trade-off from Q(f), the median ground motion is slightly increased by scattering from statistical models of small-scale heterogeneity with standard deviation (σ) of the perturbations at the lower end of the observed range (5%) but reduced by scattering attenuation at the upper end (10%) when using a realistic 3D background velocity model. The ground-motion variability is strongly affected by the addition of small-scale media heterogeneity, reducing otherwise large values of intraevent standard deviation closer to those of empirical observations. These simulations generally have intraevent standard deviations for SAs lower than the GMPEs for the modeled bandwidth, with an increasing trend with distance (most pronounced in low-to-moderate scattering media) near the level of observations at distances greater than 35 km from the fault. Durations for the models follow the same increasing trend with distance, in which σ~5% produces the best match to GMPE values. We find that a 3D background-velocity model reduces the pulse period into the expected range by breaking up coherent waves from directivity, generating a lognormal distribution of ground-motion residuals. These results indicate that a strongly heterogeneous medium is needed to produce realistic deterministic broadband ground motions. Finally, the addition of a thin surficial layer with low, frequency-independent Q in the model (with a minimum V S of 750 m/s) controls the high-frequency decay in energy, as measured by the parameter κ, that may be necessary to include as simulations continue to extend to higher frequencies.

Geochemistry & Geophysics↗

idpflex: Analysis of Intrinsically Disordered Proteins by Comparing Simulations to Small Angle Scattering Experiments

It is estimated that about 30% of the eucariotic proteome consists of intrinsically dis-ordered proteins (IDP’s), yet their presence in public structural databases is severely underrepresented. IDP’s adopt heterogeneous inter-converting conformations with similar probabilities, preventing resolution of structures with X-Ray diffraction techniques. An alternative technique with wide application on IDP systems is small angle scattering(SAS). SAS can measure average structural features of IDP’s when in vitro solution, or even at conditions mimicking protein concentrations found in the cell’s cytoplasm.

97 MATHEMATICS AND COMPUTING↗

CHARACTERIZATION OF DWPF MELTER OFF-GAS QUENCHER SAMPLE

The Savannah River National Laboratory (SRNL) recently received a deposit sample from the Melter Primary Off Gas System (POG) of the Defense Waste Processing Facility (DWPF). This sample was composed of material that had been collected while the quencher was in operation January 27, 2011 through March 31, 2011. DWPF requested, through a technical assistance request, characterization of the melter off-gas deposits by x-ray diffraction (XRD), scanning electron microscopy (SEM), and chemical analysis. The purpose of the Melter Off-Gas System is to reduce the amount of radioactive particles and mercury in the gases vented to the atmosphere. Gases emitted from the melter pass through the primary film cooler, quencher, Off-Gas Condensate Tank (OGCT), Steam Atomized Scrubbers (SAS), a condenser, a high efficiency mist eliminator, and a high efficiency particulate air filter, before being vented to the Process Vessel Vent System. The film coolers cool the gases leaving the melter vapor space from {approx}750 C to {approx}375 C, by introducing air and steam to the flow. In the next step, the quencher cools the gas to about 60 C by bringing the condensate from the OGCT in contact with the effluent (Figure 1). Most of the steam in the effluent is then condensed and the melter vapor space pressure is reduced. The purpose of the OGCT is to collect and store the condensate formed during the melter operation. Condensate from the OGCT is circulated to the SAS and atomized with steam. This atomized condensate is mixed with the off-gas to wet and join the particulate which is then removed in the cyclone. The next stage incorporates a chilled water condenser which separates the vapors and elemental mercury from the off-gas steam. Primary off-gas deposit samples from the DWPF melter have previously been analyzed. In 2003, samples from just past the film cooler, from the inlet of the quencher and inside the quencher were analyzed at SRNL. It was determined that the samples were a mixture of sludge and glass frit. The major component was Si along with Fe, Al, and other elements in the radioactive waste being processed. The deposits analyzed also contained U-235 fission products and actinide elements. Prior to that, deposits in the off-gas system in the DWPF nonradioactive half scale melter and the one-tenth scale integrated DWPF melter system were analyzed and determined to be mixtures of alkali rich chlorides, sulfates, borates, and fluorides entrained with iron oxides, spinels and frit particles formed by vapor-phase transport and condensation. Additional work was performed in 2007 in which researchers similarly found the deposits to be a combination of sludge and frit particles.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗