Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “redox stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electrochemical Stability and Reversibility of Aqueous Polysulfide Electrodes Cycled Beyond the Solubility Limit

Batteries which use dissolved redox-active species, such as redox flow batteries (RFBs), are often considered to be constrained in their operation and energy density by the solubility limit of the redox species. Here, we show that soluble redox active electrolytes can be reversibly cycled deeply into the precipitation regime, permitting higher effective concentrations, energy densities, and lower costs. Using aqueous sodium polysulfide negative electrolytes cycled in the nominal Na 2 S 2 to Na 2 S 4 capacity range as an example, we show that the effective solubility can be increased from 5 M in the fully-dissolved state to as much as 10 M using the precipitation strategy. Stable cycling was observed at 8 M concentration over more than 1600h at room temperature. We also analyze the range of polysulfide electrochemical stability, and characterize the precipitate composition. This enhanced effective concentration approach may be generalized to other redox chemistries that utilize solubilized reactants, and may be especially useful for long-duration storage applications where slow charge-discharge rates allow equilibration of precipitated species with the redox-active solution.

25 ENERGY STORAGE↗
DOE OSTI2023

Realizing High Capacity and Zero Strain in Layered Oxide Cathodes via Lithium Dual-Site Substitution for Sodium-Ion Batteries

Sodium-ion batteries have garnered unprecedented attention as an electrochemical energy storage technology, but it remains challenging to design high-energy-density cathode materials with low structural strain during the dynamic (de)sodiation processes. In this paper, we report a P2-layered lithium dual-site-substituted Na 0.7 Li 0.03 [Mg 0.15 Li 0.07 Mn 0.75 ]O 2 (NMLMO) cathode material, in which Li ions occupy both transition-metal (TM) and alkali-metal (AM) sites. The combination of theoretical calculations and experimental characterizations reveals that Li TM creates Na–O–Li electronic configurations to boost the capacity derived from the oxygen anionic redox, while Li AM serves as LiO 6 prismatic pillars to stabilize the layered structure through suppressing the detrimental phase transitions. As a result, NMLMO delivers a high specific capacity of 266 mAh g –1 and simultaneously exhibits the nearly zero-strain characteristic within a wide voltage range of 1.5–4.6 V. Our findings highlight the effective way of dual-site substitution to break the capacity–stability trade-off in cathode materials for advanced rechargeable batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Lithium Manganese Spinel Cathodes for Lithium-Ion Batteries

Spinel LiMn 2 O 4 , whose electrochemical activity was first reported by Professor John B. Goodenough’s group at Oxford in 1983, is an important cathode material for lithium-ion batteries, which attracts continuous academic and industrial interests. It is cheap and environmentally friendly, and has excellent rate performance with 3-dimensional (3D) Li + diffusion channels. However, it suffers from severe degradations, especially under extreme voltages and during high-temperature operations. In this review, the current understanding and future trends of the spinel cathode and its derivatives with cubic lattice symmetry (LiNi 0.5 Mn 1.5 O 4 that shows high-voltage stability, and Li-rich spinels that show reversible hybrid anion- and cation-redox activities) shall be discussed. Special attention is given to the degradation mechanisms, further development of spinel cathodes, and concepts of utilizing the cubic spinel structure to stabilize high-capacity layered cathodes and as robust framework for high-rate electrodes. Lastly, “Good spinel” surface phases like LiNi 0.5 Mn 1.5 O 4 are distinguished from “bad spinel” surface phases like Mn 3 O 4 .

25 ENERGY STORAGE↗
DOE OSTI2020

Bio-inspired redox mediated electrolyte for high performance flexible supercapacitor applications over broad temperature domain

For practical supercapacitors, recent advances in electrolytes have diminished long-standing problems such chemical stability, low ionic conductivity and limited electrochemical performance. Herewith, we communicate a facile method to produce anhydrous redox-active Bio-inspired electrolytes for flexible supercapacitors with application over a broad temperature range. The glycerol (Gly) gel electrolyte consists of various fractions of potassium hydroxide (KOH) and redox active unit, i.e., ammonium molybdate, (NH 4 ) 2 MoO 4 (abbreviated as Mo), in the anhydrous state. The doped glycerol matrix acts as a framework that provides a stable gel electrolyte, forming hierarchical pathway for ion diffusion. The developed gel network with Gly-KOH-MoX (X = 3, 5, 10, and 15%, w/w) provides an effective route to carry the ions onto the pores of the electrodes. The supercapacitor with Gly-KOH5-Mo10 gel provides a specific capacitance of 328 F g –1 , and the same device achieved an energy density of 45.6 Wh kg –1 at a power density of 497 W kg –1 . In addition, the supercapacitor maintained extraordinary cyclic robustness and wide temperature tolerance. Thus, the low cost and environmentally benign, cyclic durability of Gly-KOH-Mo makes these gel electrolytes a potential candidate for use in various energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2026

Evaluating Np(v) disproportionation: effect of Np concentration

The role of Np(V) concentration as a potential chemical driver of Np(V) disproportionation was investigated by probing Np redox chemistry in two different acid media using visible-near-infrared absorbance spectroscopy. In situ spectroscopy of chemically and electrochemically manipulated Np oxidation states at molar concentrations of Np underscores the difficulty in stabilizing pure Np(V), even in dilute acid. A Np(VI) component coexisting with the majority Np(V) component was observed in both HNO 3 and HCl. Electrochemical tuning and subsequent spectroscopic analysis of the Np(VI/V) ratio revealed neptunyl self-complexation as a key mechanism occurring in both acid media. Chemical reduction of the Np(VI) component and stabilization of a minor Np(IV) component in HNO 3 were observed; however, spectral data indicated that these two oxidation states were not observed to coexist, and pure Np(V) was stabilized only briefly. These findings demonstrate that high Np concentrations significantly affect the redox chemistry of Np in acidic solutions. Finally, the occurrence of Np(V) disproportionation could not be definitely determined by spectral data, but other mechanisms such as self-complexation and radiolysis, which potentially compete with disproportionation, must be considered.

Gilson, Sara E. [Oak Ridge National Laboratory (OR↗
DOE OSTI2021

Aqueous-soluble bipyridine cobalt($\tiny{II}$/$\tiny{III}$) complexes act as direct redox mediators in photosystem I-based biophotovoltaic devices

Sustainable energy production is critical for meeting growing worldwide energy demands. Due to its stability and reduction potential, photosystem I (PSI) is attractive as the photosensitizer in biophotovoltaic devices. Herein, we characterize aqueous and organic solvent soluble synthetic bipyridine-based cobalt complexes as redox mediators for PSI-based biophotovoltaics applications. Cobalt-based complexes are not destructive to protein and have appropriate midpoint potentials for electron donation to PSI. We report on PSI stability in organic solvents commonly used in biophotovoltaics. We also show the effects of a mixed organic solvent phase on PSI reduction kinetics, slowing reduction rates approximately 8–38 fold as compared to fully aqueous systems, with implications for dye regeneration rates in PSI-based biophotovoltaics. Further, we show evidence of direct electron transfer from cobalt complexes to PSI. Finally, we report on photocurrent generation from Co mediator-PSI biophotovoltaic devices. Taken together, we discuss the development of novel Co complexes and our ability to fine-tune their characteristics via functional groups and counteranion choice to drive interaction with a biological electron acceptor on multiple levels from redox midpoints, spectral overlap, and solvent requirements, among others. This work suggests that fine-tuning of redox active species for interaction with a biological partner is possible for the creation and improvement of low cost, carbon-neutral energy production in the future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Operando X-ray imaging reveals size-dependent evolution of cobalt oxide thermochemical material during thermal redox cycles

Multivalent metal oxides are promising thermochemical materials (TCMs) for energy storage and conversion owing to their high energy density, air compatibility, and high-temperature stability. Co 3 O 4 serves as a model system for examining particle-size- and structure-dependent redox behavior. While particle size and porosity are known to affect performance, their interplay and the kinetics of pore formation during cycling remain unclear. Here we show the chemical and 3D morphological evolution of Co 3 O 4 micro- and nanoparticles during redox cycles at 800–900 °C using thermal analysis, in-situ synchrotron transmission X-ray microscopy (TXM), and scanning electron microscopy. Thermal analysis shows that nanoparticles re-oxidize more rapidly than microparticles at 800 °C. In-situ nanotomography and chemical imaging reveals that nanoparticles undergo redox conversion without forming internal pores, whereas microparticles develop isolated porosity during reduction. These pores persist through re-oxidation, correlating to a lower conversion rate in subsequent cycles. Our results demonstrate distinct degradation kinetics in Co 3 O 4 micro- and nanoparticles, underscoring the critical role of particle size and porosity in redox performance and informing strategies to enhance the long-term efficiency of metal oxide TCMs.

25 ENERGY STORAGE↗
DOE OSTI2023

A Highly Soluble Iron–Based Posolyte Species with High Redox Potential for Aqueous Redox Flow Batteries

A novel iron-based posolyte redox species are presented for an aqueous redox flow battery, (Tetrakis(2-pyridylmethyl)ethylenediamine)iron(II) dichloride, which is obtained by a simple synthetic route, shows a high redox potential of 0.788 V versus SHE, and exhibits exceptional aqueous solubility of 1.46 M. Paired with bis(3-trimethylammonio)propyl viologen tetrachloride at neutral pH, the battery demonstrates an open-circuit voltage of 1.19 V and delivers good cycling performance, with a capacity fade rate of 0.28% per day and coulombic efficiency of 99.3%. Postmortem chemical and electrochemical analyses of the posolyte species suggest future routes for stabilization of the complex. Among all the iron complexes with a redox potential above 0.4 V versus SHE, this compound exhibits the highest solubility. Furthermore, these results offer valuable insights that can be applied to the development of future posolyte species for sustainable energy storage solutions.

25 ENERGY STORAGE↗
DOE OSTI2025

Effect of Impurities on the Redox Properties of Goethite

Iron oxide minerals regulate the flux of electrons in the environment and are important hosts for trace and minor, yet critical, elements. Here, we present the first evidence of a direct link between the local coordination environments of Ni and Zn and the redox properties of their host phase goethite (α-FeOOH), the most abundant Fe(III) (oxyhydr)oxide at Earth’s surface. Here, we used aqueous redox measurements to show that the redox potential E H 0 , and hence the mineral’s stability, follows the order: pure goethite ≥ Zn-goethite > Ni-goethite. Parallel X-ray absorption and scattering measurements demonstrate, using quantum-informed analysis, that the local coordination environment of the smaller impurity, Ni, causes more bulk strain energy than Zn, which nearly accounts for the difference in E H 0 between Ni- and Zn-goethite. Our theory-informed, experimental study reveals how two common impurities affect the stability of goethite with implications for the biogeochemical reactivity of Fe(III) (oxyhydr)oxide in mediating elemental and electron fluxes in the environment.

42 ENGINEERING↗
DOE OSTI2024

Impact of Mg Substitution on the Structure, Stability, and Properties of the Na 2 Fe 2 F 7 Weberite Cathode

Of the few weberite-type Na-ion cathodes explored to date, Na 2 Fe 2 F 7 exhibits the best performance, with capacities up to 184 mAh/g and energy densities up to 550 Wh/kg reported for this material. However, the development of robust structure–property relationships for this material is complicated by its tendency to form as a mixture of metastable polymorphs, and transform to a lower-energy Na y FeF 3 perovskite compound during electrochemical cycling. Our first-principles-guided exploration of Fe-based weberite solid solutions with redox-inactive Mg 2+ and Al 3+ predicts an enhanced thermodynamic stability of Na 2 Mg x Fe 2–x F 7 as the Mg content is increased, and the x = 0.125 composition is selected for further exploration. We demonstrate that the monoclinic polymorph (space group C2/c) of Na 2 Fe 2 F 7 (Mg0) and of a new Mg-substituted weberite composition, Na 2 Mg 0.125 Fe 1.875 F 7 (Mg0.125), can be isolated using an optimized synthesis protocol. The impact of Mg substitution on the stability of the weberite phase during electrochemical cycling, and on the extent and rate of Na (de)intercalation, is examined. Irrespective of the Mg content, we find that the weberite phase is retained when cycling over a narrow voltage window (2.8–4.0 V vs Na/Na+). Over a wider voltage range (1.9–4.0 V), Mg0 shows steady capacity fade due to its transformation to the NayFeF3 perovskite phase, while Mg0.125 displays more reversible cycling and a reduced phase transformation. Yet, Mg incorporation also leads to kinetically limited Na extraction and a reduced overall capacity. These findings highlight the need for the continued compositional optimization of weberite cathodes to improve their structural stability while maximizing their energy density.

25 ENERGY STORAGE↗
DOE OSTI2020

Stabilized Electrode/Electrolyte Interphase by a Saturated Ionic Liquid Electrolyte for High-Voltage NMC532/Si-Graphite Cells

Nonaqueous electrolyte has become one of the technical barriers in enabling Li-ion battery comprising of a high voltage cathode and high capacity anode. Here, we demonstrate a saturated piperidinum bis(fluorosulfonyl)imide ionic liquid (IL) with a LiFSI salt not only supports the redox reaction on the cathode at high voltages, but also shows exceptional kinetic stability on the lithiated anode as evidenced by its improved cycling performance in a NMC532/Si-graphite full cells cycled between 4.6 and 3.0 V. On the basis of the spectroscopic/microscopic analysis and molecular dynamics (MD) simulations, the superior performance of the cells is attributed to the formation of solid-electrolyte-interphase on both electrode as well as unique solvation structure where a deadlocked coordination network is established at the saturated state, which prevents transition metal dissolution into the electrolyte via a solvation process.

25 ENERGY STORAGE↗
DOE OSTI2026

Revealing the Roles of CuF 2 /NiF 2 Incorporation in the Electrochemical Performance of FeF 3 Cathodes in Solid‐State Batteries

Mixed metal fluorides have been considered as a promising candidate to lower the voltage hysteresis of conversion-type iron fluoride cathodes, but their cycling stability is limited due to transition metal dissolution and interphase growth in liquid electrolyte batteries. Here, we study the role of incorporating CuF 2 and NiF 2 in the electrochemical performance of FeF 3 cathode in halide-based solid-state batteries to test whether we can transfer the kinetic benefit of low voltage hysteresis to solid-state batteries while using solid electrolyte to eliminate transition metal dissolution and stabilize the interphase. Synchrotron X-ray absorption spectroscopy results indicated the redox reactions are attributed to Cu 0 /Cu + and Fe 0 /Fe 2+ in 25CuF 2 -75FeF 3 and Ni 0 /Ni 2+ and Fe 0 /Fe 3+ in 10NiF 2 -90FeF 3 . While no apparent improvement in electrode kinetics can be observed, the incorporation of CuF 2 and NiF 2 can largely improve the cycling stability of FeF 3 cathodes. In conclusion, the results demonstrate the advantages of using solid-state concept to improve the cycling stability of conversion-type cathodes.

25 ENERGY STORAGE↗
DOE OSTI2024

Long-Term Stability of Nicotinamide Cofactors in Common Aqueous Buffers: Implications for Cell-Free Biocatalysis

The use of nicotinamide cofactors in cell-free biocatalytic systems is necessitated by the high specificity that these enzymes show for their natural redox mediators. Unfortunately, isolation and use of natural cofactors is costly, which suggests that enhancing their stability is key to enabling their use in industrial processes. This study details NAD+ and NADH stability in three buffer systems (sodium phosphate, HEPES, and Tris) at 19 °C and 25 °C and for up to 43 d. In Tris, both NADH and NAD+ were found to be highly stable. NADH degradation rates of 4 μM/d (19 °C) and 11 μM/d (25 °C) were observed in Tris buffer, corresponding to >90% and 75% remaining after 43 d, respectively. Higher degradation rates (up to 34 μM/d) were observed when sodium phosphate or HEPES buffers were used. The effect of a mild increase in temperature was determined to be significant for long-term stability, and it was shown that degradation under these conditions can be easily monitored via UV–Vis, because the degradation proceeds via the oxidation/de-aromatization of the dihydropyridine ring. Overall, this work emphasizes that the choice of buffer system is consequential for bioreactor systems employing natural nicotinamide cofactors for extended periods of time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reversible Electrochemical Lithium Cycling in a Vanadium(IV)- and Niobium(V)-Based Wadsley–Roth Phase

Fast charging remains one of the greatest safety challenges in Li-ion batteries due to Li-dendrite growth occurring on graphite anodes if they are lithiated too quickly. The search for high-rate anodes has highlighted materials in the Wadsley–Roth (WR) shear phase family. The relative abundance of V compared with traditional WR compositions of Nb and W makes V-based phases attractive. However, the high voltage and poor reversibility typically associated with V redox have made V-rich WR phases less studied than Nb- and W-rich phases. Here, we show that a new V-rich Wadsley–Roth phase, V 7 Nb 6 O 29 , achieves excellent rate capability and 80% capacity retention after 228 cycles with a relatively low average voltage of 1.76 V vs Li/Li + compared with other V-rich WR phases. Single-crystal X-ray diffraction reveals a P4/m space group with repeating 2 × 2 × ∞ and 3 × 3 × ∞ blocks of V 4+ and Nb 5+ octahedra. Finally, combined neutron pair distribution function analysis, X-ray absorption spectroscopy, and density functional theory calculations show that V redox is the primary source of capacity and that cycling stability is provided by the stable octahedral coordination adopted by V 4+ in the material.

25 ENERGY STORAGE↗
DOE OSTI2026

Machine-Learning-Driven Discovery of Water Splitting BaFe 2 O 4 and Human-in-the-Loop Improvement via Al-Substitution for Increased Thermal Stability

Thermochemical hydrogen (TCH) production offers a promising method for converting thermal energy into hydrogen fuel through heat-driven redox cycles of metal oxides. Here, in this work a defect graph neural network (dGNN) was used to predict oxygen vacancy formation energies ΔH V O combined with Materials Project predictions of oxygen chemical potential stability to screen candidate oxides via high-throughput database analysis. BaFe 2 O 4 was identified as a promising material for experimental validation based on its predicted ΔH V O , oxygen chemical potential stability range, and potential for tunable substitutions to improve thermal properties. Experimental validation using thermogravimetric analysis (TGA), stagnation flow reactor (SFR), X-ray diffraction (XRD), and electron microscopy confirmed positive water-splitting behavior but also revealed limitations in thermal stability under aggressive reduction conditions. To address this, a human-in-the-loop modification strategy was employed introducing Al substitution in BaFe 2–x Al x O 4 ; this modification improves thermal stability, alters the crystal structure and enhances overall performance. These results demonstrate a combined computational and experimental workflow in which machine learning accelerates identification of promising candidates, while targeted experimental design enables optimization of functional performance. This approach advances the development of robust, cost-effective TCH materials and highlights the importance of integrating data-driven discovery with human-guided materials design in paving the way for scalable hydrogen production technologies.

organic↗
DOE OSTI2022

Enhanced Catalytic Performance of a Ce/V Oxo Cluster through Confinement in Mesoporous SBA-15

To increase catalytic efficiency, mesoporous supports have been widely applied to immobilize well-defined metal oxide clusters due to their ability to stabilize highly dispersed clusters. Here, for this study, a redox-active heterometallic Ce 12 V 6 -oxo cluster (CeV) was first presynthesized and then incorporated into mesoporous silica, SBA-15, via a straightforward impregnation method. Scanning transmission electron microscopy (STEM) and Fourier transform infrared spectroscopy (FTIR), in concert with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), verified the successful introduction of the CeV cluster inside the pore of SBA-15. The 51 V magic angle spinning solid-state nuclear magnetic resonance ( 51 V MAS NMR) spectroscopy and differential pair distribution function (dPDF) analysis confirmed the structural integrity of the CeV cluster inside the SBA-15. The composite was then benchmarked for liquid-phase oxidation of 2-chloroethyl ethyl sulfide (CEES) under mild conditions and gas-phase oxidative dehydrogenation (ODH) of propane under high temperatures (up to 550 °C). The catalytic reactivity results demonstrated 8- and 14-fold increase in turnover frequency (TOF) values of the composite (CeV@10SBA-2) than the bulk CeV cluster under the same conditions for CEES oxidation and ODH, respectively. These results highlight the improved reactivity of the catalytically active CeV cluster as attributed to the higher dispersion of the discrete cluster upon immobilization within the SBA-15 support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗