Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “quantitative structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Active Region Magnetic Structure Observed in the Photosphere and Chromosphere

The magnetic flux above sunspots and plage in NOAA (National Oceanic and Atmospheric Administration) Active Region 8299 has been measured in the photosphere and the chromosphere. We investigate the vertical magnetic structure above the umbrae, penumbrae and plage regions using quantitative statistical comparisons of the photospheric and chromospheric vector magnetic flux data. The results include: (1) a decrease in flux with height, (2) the direct detection of the superpenumbral canopy in the chromosphere, (3) values for dB/dz which are consistent with earlier investigations when derived from a straight difference between the two datasets but quite low when derived from the delta x B = 0 condition, (4) a monolithic structure in the umbra which extends well into the upper chromosphere with a very complex and varied structure in the penumbra and plage, as evidenced by (5) a uniform magnetic scale height in the umbrae with an abrupt jump to widely varying scale heights in the penumbral and plage regions. Further, we find (6) evidence for a very large (delta z approximately equals 3Mm) height difference between the atmospheric layers sampled in the two magnetograms, almost a factor of three larger than that implied by atmospheric models. We additionally test the apropriateness of using photospheric magnetic flux as a boundary for field-line extrapolations, and find a better agreement with observed coronal structure when the chromospheric flux is used as a boundary.

Leka, K. D.↗
NASA NTRS1989

Three-dimensional structure of a plane mixing layer

An experimental study is reported which shows the spanwise structure of a plane mixing layer originating from laminar boundary layers. Quantitative measurements are obtained for the first time which show the origin and evolution of streamwise vortices within the mixing layer. After the first spanwise vortex rollup occurs, streamwise structures are triggered in clusters within the braid region of the mixing layer. Further downstream, they realign to form pairs of counterrotating vortices. The maximum vorticity diffuses rapidly with increasing downstream distance while the vortices grow, scaling with the mixing layer vorticity thickness. The presence of the streamwise vortices leads to significant spanwise distortions in the mean and turbulence properties of the mixing layer. A consistent peak in the secondary shear stress exists for each streamwise vortex.

Bell, James H.↗
NASA NTRS1985

Measured electron contribution to Shuttle plasma environment: Abbreviated update

The differential energy spectra of electrons between 1 and 100 eV were measured by an electron spectrometer flown on an early shuttle. This energy range was scanned in 64 incremental steps with a resolution of 7%. The most striking feature that was observed throughout these spectra was a relatively flat distribution of the higher energy electrons out to 100 eV. This is in contrast to normal ambient spectra which consistently show a rapid decline in quantitative flux beyond 50 to 55 eV. The lower energy (1 to 2 eV) end of these spectra showed steep thermal trails comparable to normal ambient spectral structure. In general, daytime fluxes were significantly higher than those obtained during nighttime measurements. Quantitative flux excursions which may possibly be associated with thruster firing were frequently observed. Spectral structure suggestive of the N2 vibrational excitation energy loss mechanism was also seen in the data from some measurement periods. Examples of these spectra are shown and possible correlations are discussed.

Mcmahon, W.↗
NASA NTRS1972

Adhesion, friction, wear, and lubrication research by modern surface science techniques.

The field of surface science has undergone intense revitalization with the introduction of low-energy electron diffraction, Auger electron spectroscopy, ellipsometry, and other surface analytical techniques which have been sophisticated within the last decade. These developments have permitted submono- and monolayer structure analysis as well as chemical identification and quantitative analysis. The application of a number of these techniques to the solution of problems in the fields of friction, lubrication, and wear are examined in detail for the particular case of iron; and in general to illustrate how the accumulation of pure data will contribute toward the establishment of physiochemical concepts which are required to understand the mechanisms that are operational in friction systems. In the case of iron, LEED, Auger and microcontact studies have established that hydrogen and light-saturated organic vapors do not establish interfaces which prevent iron from welding, whereas oxygen and some oxygen and sulfur compounds do reduce welding as well as the coefficient of friction. Interpretation of these data suggests a mechanism of sulfur interaction in lubricating systems.

Keller, D. V., Jr.↗
NASA NTRS1980

A quinone-assisted photoformation of energy-rich chemical bonds

In a study of biochemical means of solar energy conversion, ADP and inorganic phosphates were converted to ATP by white light in the nonaqueous solvent dimethylformamide in the presence of tetrachloro-p-quinone or ubiquinone. Conversion of ADP to ATP has been accomplished in aqueous suspension by the use of cell-like structures aggregated from poly(aspartic acid, glutamic acid, tyrosine). This is believed to occur through the formation of dopaquinone in the peptide structure during illumination. The way in which the quantitative yield of ATP has been influenced by pH and by added substances, such as FeCl2, was studied.

Fox, S. W.↗
NASA NTRS1990

Recent advances in magnetospheric substorm research

More than two decades of magnetospheric exploration have led to a reasonably clear morphological picture of geomagnetic substorms, which is often summarized in terms of the near-earth neutral line model of substorms. Although this qualitative theory is quite comprehensive and explains a great many observations, it is hard pressed to explain both recent observations of consistently earthward flow within 19 RE and also the prompt onset of magnetic turbulence at 8 RE at the time of substorm onset. Other theories have recently been proposed which tend to be more quantitative, but which explain a more limited number of substorm observations. The challenge seems to be to understand the esential physics of these various quantitative theories and integrate them into a larger structure such as provided by the near-earth neutral line model.

Fairfield, D. H.↗
NASA NTRS1992

Propellant production and useful materials: Hardware data from components and the systems

Research activities at the University of Arizona/NASA Space Engineering Research Center are described; the primary emphasis is on hardware development and operation. The research activities are all aimed toward introducing significant cost reductions through the utilization of resources locally available at extraterrestrial sites. The four logical aspects include lunar, Martian, support, and common technologies. These are described in turn. The hardware realizations are based upon sound scientific principles which are used to screen a host of interesting and novel concepts. Small scale feasibility studies are used as the screen to allow only the most promising concepts to proceed. Specific examples include: kg/day-class oxygen plant that uses CO2 as the feed stock, spent stream utilization to produce methane and 'higher' compounds (using hydrogen from a water electrolysis plant), separation of CO from the CO2, reduction of any iron bearing silicate (lunar soils), production of structural components, smart sensors and autonomous controls, and quantitative computer simulation of extraterrestrial plants. The most important feature of all this research continues to be the training of high-quality students for our future in space.

Ramohalli, Kumar↗
NASA NTRS1991

Development of image processing techniques for applications in flow visualization and analysis

A comparison between two flow visualization studies of an axi-symmetric circular jet issuing into still fluid, using two different experimental techniques, is described. In the first case laser induced fluorescence is used to visualize the flow structure, whilst smoke is utilized in the second. Quantitative information was obtained from these visualized flow regimes using two different digital imaging systems. Results are presented of the rate at which the jet expands in the downstream direction and these compare favorably with the more established data.

Disimile, Peter J.↗
NASA NTRS1993

Multibody-plasma interactions - Charging in the wake

Multibody-plasma interactions refers to two or more charged bodies simultaneously interacting with the surrounding plasma as well as each other. This paper concerns a basic type of such interactions in space: the charging of a free flyer in the wake of a large structure. The conditions for severe charging are discussed quantitatively. Computer particle simulations are carried out to obtain the charging potentials in the wake of both floating and biased plate. It is shown that a severe charging zone exists in the near wake of a floating plate within which a free flyer is charged to the KV range under the sun shadow/auroral electron condition. Whether the plate is biased or floating, a large potential difference always exists between the plate and a docking free flyer in the wake. The effects of wake charging on spacecraft docking operations are discussed.

Wang, J.↗
NASA NTRS1997

Experimental Investigation of the Near Wall Flow Structure of a Low Reynolds Number 3-D Turbulent Boundary Layer

Laser Doppler velocimetry (LDV) measurements and hydrogen bubble flow visualization techniques were used to examine the near-wall flow structure of 2D and 3D turbulent boundary layers (TBLs) over a range of low Reynolds numbers. The goals of this research were (1) an increased understanding of the flow physics in the near wall region of turbulent boundary layers,(2) to observe and quantify differences between 2D and 3D TBL flow structures, and (3) to document Reynolds number effects for 3D TBLs. The LDV data have provided results detailing the turbulence structure of the 2D and 3D TBLs. These results include mean Reynolds stress distributions, flow skewing results, and U and V spectra. Effects of Reynolds number for the 3D flow were also examined. Comparison to results with the same 3D flow geometry but at a significantly higher Reynolds number provided unique insight into the structure of 3D TBLs. While the 3D mean and fluctuating velocities were found to be highly dependent on Reynolds number, a previously defined shear stress parameter was discovered to be invariant with Reynolds number. The hydrogen bubble technique was used as a flow visualization tool to examine the near-wall flow structure of 2D and 3D TBLs. Both the quantitative and qualitative results displayed larger turbulent fluctuations with more highly concentrated vorticity regions for the 2D flow.

FLOW VISUALIZATION↗
NASA NTRS2003

Visual and Vestibular Determinants of Perceived Eye-Level

Both gravitational and optical sources of stimulation combine to determine the perceived elevations of visual targets. The ways in which these sources of stimulation combine with one another in operational aeronautical environments are critical for pilots to make accurate judgments of the relative altitudes of other aircraft and of their own altitude relative to the terrain. In a recent study, my colleagues and I required eighteen observers to set visual targets at their apparent horizon while they experienced various levels of G(sub z) in the human centrifuge at NASA-Ames Research Center. The targets were viewed in darkness and also against specific background optical arrays that were oriented at various angles with respect to the vertical; target settings were lowered as Gz was increased; this effect was reduced when the background optical array was visible. Also, target settings were displaced in the direction that the background optical array was pitched. Our results were attributed to the combined influences of otolith-oculomotor mechanisms that underlie the elevator illusion and visual-oculomotor mechanisms (optostatic responses) that underlie the perceptual effects of viewing pitched optical arrays that comprise the background. In this paper, I present a mathematical model that describes the independent and combined effects of G(sub z) intensity and the orientation and structure of background optical arrays; the model predicts quantitative deviations from normal accurate perceptions of target localization under a variety of conditions. Our earlier experimental results and the mathematical model are described in some detail, and the effects of viewing specific optical arrays under various gravitational-inertial conditions encountered in aeronautical environments are discussed.

Cohen, Malcolm Martin↗
NASA NTRSDate not supplied

Application of Analytical Hierarchy Process for Narrowing Down Nep Candidate Reactor Designs

Nuclear electric propulsion (NEP)-powered vehicles have been contemplated for human Mars missions. The nuclear power system contemplates using a high temperature light-weight nuclear reactor for the production of electrical power in the range of 2-5 MWe with a 3-10 year service life. A myriad of technology options exist for achieving these mission objectives. The analytic hierarchy process (AHP), a multi-attribute decision method, is being used to narrow down the candidate designs. The AHP is a structured decision process that fuses model-supplied quantitative data with subjective assessments to facilitate decisions that involve multiple competing criteria. Proven end-to-end nuclear design and systems analysis tools will be used to provide quantitative performance data such as end-to-end system reliability, system robustness to recover from off-normal conditions, system specific weight (α in kg/kWe), and the ability to meet the service life-time and power level requirements. Three high assay low enriched uranium (HALEU) reactor concepts, namely, gas-, heat pipe- and pumped liquid-cooled nuclear cores coupled to a He/Xe gas or supercritical CO2- Brayton power conversion system are being modeled using the AHP to understand the trade-offs associated with these design combinations. In addition to the reactor and power conversion options, there are a myriad of additional components and subsystems – e.g., radiators, heat exchangers, and recuperators – that also figure into the evaluation process. The choice of the right overall system is a multidimensional problem that has to include not only quantitative data, but also the so called “external factors”, examples of which include the component and subsystem Technology Readiness Levels (TRLs), the associated Advancement Degrees of Difficulty (AD2), the cost and schedule required to achieve a technical maturity consistent with mission infusion, alignment with the priorities of NASA’s Space Nuclear Propulsion program, and alignment with other ongoing government and commercial investments in micro reactors. Focused expert elicitations form the basis for qualitative data set. As a final step, decision-makers individually express their opinions regarding the relative importance of the criteria and preferences among the alternatives through pairwise comparisons. The paper will describe the AHP approach, progress to-date applying it to the NEP human Mars mission problem, and preliminary results. Use of AHP provides sufficient flexibility for incorporating industry input at different stages as the technologies evolve through additional research and development. It is expected that the decision process will be ongoing and expanded to examine additional options and technology choices, culminating in a defensible set of candidate reactor concepts that will form the basis for developing a multi-year NEP technology maturation strategy. .

Dasari V Rao↗
NASA NTRSDate not supplied

Single-Scattering Properties of Melting Precipitation for GPM Passive Microwave and Radar Remote Sensing Applications

Over the past two decades, detailed computational simulations of the intricate three dimensional structures of ice-phase crystals and aggregates of those crystals have been developed. The microwave single-scattering properties of these simulated ice particles have been computed and used to improve quantitative estimates of snow rates and to better deRne the vertical structure of snow water contents in deep convective systems, as derived from satellite-borne passive microwave and/or radar remote sensing measurements. The same icephase particles have more recently been used as the starting point for simulations of melting precipitation using computational melting methods. In the current study, a heuristic melting method, as well as a physically-based melting procedure based on smoothed-particle hydrodynamics, are applied to ice particle models to describe the full evolution of the particles from dry snow to liquid drops. The discrete dipole approximation is utilized to calculate the single-scattering properties of the mixed-phase particles throughout the melting process. Then, the properties of the particles are “mapped” into simpliRed microphysical simulations of particle size spectra in the melting layers of stratiform, precipitating clouds. The bulk single-scattering properties of the melting layers and the sensitivity of their properties to modeling assumptions are explored, and the implications for combined radar-radiometer precipitation remote sensing from GPM are discussed.

William S Olson↗
NASA NTRS1984

The Effect of Growth Rate on Interface Morphology

Since significantly different solidification structures of a given alloy can be obtained by varying experimental growth rates, it is desirable to understand the basic factors which control the formation and stability of these microstructures when conditions are altered. Directional solidification experiments are described and the results obtained in metallic and transparent organic systems are presented. Emphasis is on the characteristics of dendritic structures obtained under different solidification conditions. Specifically, the effect of the growth rate on the primary dendritic spacing, the secondary dendrite spacing, and the dendrite tip radius is discussed. It is shown that significant changes in the primary spacing are observed when a dendrite to cellular transition takes place at lower velocities. It is found that the primary cellular spacing is much smaller than the primary dendrite spacing so that a maximum in the primary spacing occurs as a function of velocity at the dendrite-cellular transition. A theoretical model is also described which quantitatively explains various microstructural features of dendritic and cellular structures.

Trivedi, R.↗
NASA NTRS2016

Development of Multi-Physics Dynamics Models for High-Frequency Large-Amplitude Structural Response Simulation

An analytic approach is demonstrated to reveal potential pyroshock-driven dynamic effects causing power losses in the Thermo-Electric (TE) module bars of the Mars Science Laboratory (MSL) Multi-Mission Radioisotope Thermoelectric Generator (MMRTG). This study utilizes high-fidelity finite element analysis with SIERRA/PRESTO codes to estimate wave propagation effects due to large-amplitude suddenly-applied pyro shock loads in the MMRTG. A high fidelity model of the TE module bar was created with approximately 30 million degrees-of-freedom (DOF). First, a quasi-static preload was applied on top of the TE module bar, then transient tri-axial acceleration inputs were simultaneously applied on the preloaded module. The applied input acceleration signals were measured during MMRTG shock qualification tests performed at the Jet Propulsion Laboratory. An explicit finite element solver in the SIERRA/PRESTO computational environment, along with a 3000 processor parallel super -computing framework at NASA AMES, was used for the simulation. The simulation results were investigated both qualitatively and quantitatively. The predicted shock wave propagation results provide detailed structural responses throughout the TE module bar, and key insights into the dynamic response (i.e., loads, displacements, accelerations) of critical internal spring/piston compression systems, TE materials, and internal component interfaces in the MMRTG TE module bar. They also provide confidence on the viability of this high-fidelity modeling scheme to accurately predict shock wave propagation patterns within complex structures. This analytic approach is envisioned for modeling shock sensitive hardware susceptible to intense shock environments positioned near shock separation devices in modern space vehicles and systems.

Shock Waves↗
NASA NTRS1990

Practical Estimates of the Errors Associated with the Governing Shearography Equation

In a series of papers Hung pioneered the development of shearography, an optical NDE technique that detects gradients of surface displacements. Its utility for qualitative flaw characterization has been demonstrated, and while there is a need for using shearography in NDE for quantitative analysis, a large amount of the research has concentrated on the qualitative evaluation of structures and materials. The purpose of this paper is to begin building upon a foundation for the newly emerging quantitative shearography. We begin the analysis by considering the approximations leading to the governing shearography equation.

Fulton, J. P.↗
NASA NTRS2010

Use of Modal Acoustic Emission to Monitor Damage Progression in Carbon Fiber/Epoxy Tows and Implications for Composite Structures

ASTM-based ILH methods were found to give a reproducible, quantitative estimate of the stress threshold at which significant accumulated damage began to occur. a) FR events are low energy (<2 V(exp 20 microsec) b) FR events occur close to the observed failure locus. c) FR events consist of more than 30% fiber breakage (>300 kHz) d) FR events show a consistent hierarchy of cooperative damage for composite tow, and for the COPV tested, regardless of applied load. Application of ILH or related stress profiles could lead to robust pass/fail acceptance criteria based on the FR. Initial application of FR and FFT analysis of AE data acquired on COPVs is promising.

Waller, Jess M.↗
NASA NTRS1989

Experimental investigation of the crashworthiness of scaled composite sailplane fuselages

The crash dynamics and energy absorption of composite sailplane fuselage segments undergoing nose-down impact were investigated. More than 10 quarter-scale structurally similar test articles, typical of high-performance sailplane designs, were tested. Fuselages segments were fabricated of combinations of fiberglass, graphite, Kevlar, and Spectra fabric materials. Quasistatic and dynamic tests were conducted. The quasistatic tests were found to replicate the strain history and failure modes observed in the dynamic tests. Failure modes of the quarter-scale model were qualitatively compared with full-scale crash evidence and quantitatively compared with current design criteria. By combining material and structural improvements, substantial increases in crashworthiness were demonstrated.

Kampf, Karl-Peter↗