Generalized Protein-Repellent Properties of Ultrathin Homopolymer Films
Explore the source record for details and available documents.
99 GENERAL AND MISCELLANEOUS↗
SEARCH · Engineering Papers
Results for “pyridines”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
SAN-Based Block Polymers as a Platform for Manufacturing Strong Isoporous Membranes
Ultrafiltration (UF) membranes are ubiquitous in water purification and bioprocessing. However, co-designing their mechanical and transport properties remains challenging because of the broad pore size distributions at the surface and within the bulk that result from nonsolvent-induced phase separation (NIPS) – their typical manufacturing process. These distributions influence the hydrodynamic resistance to water flow and the stress concentrations around the pores. Developing advanced UF membranes requires innovative molecular designs that offer control over the surface and bulk pores, as well as the mechanical properties of the load-bearing, polymer. Here, we introduce a platform for designing UF membranes by leveraging solution self-assembly of block polymers and chain architectures with pendant polar groups. The block polymers consist of a poly(styrene-co-acrylonitrile) hydrophobic block, which is known for its strength, and a poly(4-vinyl pyridine) hydrophilic block, which drives solution self-assembly. We focus on a series of block polymers with constant molecular weight, M n ≈ 115 kDa, SAN fraction, 75 wt.%, and varying acrylonitrile content, 0 to 40 mol%, to demonstrate that: (i) RAFT dispersion copolymerization of acrylonitrile and styrene provides a facile route to synthesize strong block polymers, (ii) incorporation of acrylonitrile into the hydrophobic block enhances membrane strength by facilitating chain entanglements and dipole-dipole interactions, and (iii) acrylonitrile alters the balance between membrane permeance and rejection, even when the membranes feature similar surface and bulk pores. Overall, our results provide insights into the molecular design of UF membranes with enhanced mechanical and separation properties, contributing to the development of materials for water and energy technologies.
deformation↗
Six-Letter DNA Nanotechnology: Incorporation of Z-P Base Pairs into Self-Assembling 3D Crystals
Artificially expanded genetic information systems (AEGIS) were developed to expand the diversity and functionality of biological systems. Recent experiments have shown that these expanded DNA molecular systems are robust platforms for information storage and retrieval as well as useful for basic biotechnologies. In tandem, nucleic acid nanotechnology has seen the use of information-based “semantomorphic” encoding to drive the self-assembly of a vast array of supramolecular devices. To establish the effectiveness of AEGIS toward nanotechnological applications, we investigated the ability of a six-letter alphabet composed of A:T, G:C and synthetic Z:P (Z, 6-amino-3-(1'-β- D-2'-deoxy ribofuranosyl)-5-nitro-(1H)-pyridin-2-one; P, 2-amino-8-(1'- β-D-2'-deoxyribofuranosyl)-imidazo-[1,2a]-1,3,5-triazin-(8H)-4-one) base pairs to engage in 3D self-assembly. We found that crystals could be programmably assembled from AEGIS oligomers. We conclude that unnatural base pairs can be used for the topological self-assembly of crystals. We anticipate the expansion of AEGISbased nucleic acid nanotechnologies to enable the development of novel nanomaterials, high-fidelity signal cascades, and dynamic nanoscale devices.
59 BASIC BIOLOGICAL SCIENCES↗
Ancillary Steric Effects on the Activation of SiH Bonds in Arylsilazido Rare-Earth Compounds
Three new hydridosilazido ligands, –N(SiHMe 2 )Aryl (Aryl = Ph, 2,6-C 6 Me 2 H 3 (dmp), 2,6-C 6 iPr 2 H 3 (dipp)) and their rare-earth complexes Ln{N(SiHMe 2 )Aryl} 3 (THF) n (Ln = Sc, Y, Lu; Aryl = Ph, n = 2; Aryl = dmp, n = 1; Aryl = dipp, n = 0) were synthesized to study the relationships among ligand steric properties, secondary Ln←H–Si bonding, and the reactivity of amide and SiH groups. In these compounds, the steric encumbrance of the aryl group was systematically increased from phenyl to 2,6-dimethylphenyl to 2,6-diisopropylphenyl. NMR, IR, and X-ray diffraction studies of the complexes characterize the number of secondary interactions and additional THF ligands coordinated to the rare-earth centers. The complexes with the smallest phenylsilazido ligands, Ln{N(SiHMe 2 )Ph} 3 (THF) 2 , contain features associated with three nonbridging 2-center-2-electron (2c-2e) Si–H bonds. Characterization of intermediate-sized Ln{N(SiHMe 2 )dmp} 3 THF reveals three and two Ln←H–Si interactions for yttrium and lutetium analogues, respectively, with both metals having one coordinated THF per complex. Ln{N(SiHMe 2 )dipp} 3 is formed solvent-free, and all three ligands adopt Ln←H–Si bonding modes. The reaction between Ln{N(SiHMe 2 )dipp} 3 and ketones provides the hydrosilylated product via addition of C=O and Si–H bonds, which occurs rapidly even at low temperature. Furthermore, this reaction is proposed to occur through an associative mechanism on the basis of negative activation entropy measured for substitution of pyridine in Ln{N(SiHMe 2 )dipp} 3 ·NC 5 H 5 .
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Diastereoselective Template Synthesis on Iron and Uranium
The addition of 2 equiv of t Bu 2 PSiMe 3 to 2,6-pyridinedicarboxaldehyde ((CHO) 2 Py) results in a rac / meso diastereomeric mixture of the PNP-chelating ligand 2,6-bis((trimethylsiloxy)(di- tert -butylphosphino)-methyl)-pyridine ( (OTMS) PNP t Bu ) ( 1 - r / m ) via addition of the P–Si bond across both of the aldehyde C–O bonds. Chelation of (OTMS) PNP t Bu to FeCl 2 results in the same diastereotopic ratio of ( (OTMS) PNP t Bu )FeCl 2 ( 2- r / m ) as the free ligand. Fractional crystallization allows for the isolation of the C 2 isomer, 2- r , and a template synthesis protocol allows for the synthesis and isolation of the C s isomer, 2- m , in good yield. Furthermore, the template synthesis protocol was also expanded to the f -block with the use of UCl 4 in order to assess the specificity of the template synthesis on a larger metal cation. This reaction performed on UCl 4 forms the meso diastereospecific uranium complex ( ( t Bu2P) ONO)UCl 2 (dtbpy), 3 - m , with observation of the rational intermediate ( (OTMS) PNO t Bu )UCl 3 (dtbpy), 4 - m , which arose from the respective formation of two- or one-equivalents of TMS–Cl and formation of the corresponding U–O bond.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Pentamethylcyclopentadienyl Metalloradical Iron Complexes Containing Redox Noninnocent α-Diimine-Type Ligands: Synthesis, Molecular, and Electronic Structures
The synthesis and characterization of pentamethylcyclopentadienyl iron complexes bearing the redox non-innocent α-diimine (N,N'-dimesitylbutane-2,3-diimine, Mes DI) and α-iminopyridine (N-mesityl(pyridin-2-yl)ethanimine Mes PI) ligands were explored. One-pot reduction and complexation of the cyclopentadienyl ring was accomplished by treatment of (κ 2 -N,N')FeCl 2 (N,N'= Mes DI or Mes PI) pre-cursors with [C 5 Me 5 ]Li. The resulting iron compounds were characterized by paramagnetic 1 H NMR spectroscopy, magnetic susceptibility measurements, zero-field 57 Fe Mössbauer spectroscopy, low-temperature EPR spectroscopy, and cyclic voltammetry. The combined spectroscopic, structural and DFT computational data supported low-spin iron(III) compounds (S Fe = ½) with π-acidic, formally doubly-reduced chelating ligands.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
An Efficient Copper-Based Redox Shuttle Bearing a Hexadentate Polypyridyl Ligand for DSCs under Low-Light Conditions
A Cu complex featuring a hexadentate ligand was synthesized and evaluated as a redox shuttle in dye-sensitized solar cell (DSC) devices, which exhibited excellent performance under low-light conditions. Cu-based redox shuttles (RSs) have been shown to perform remarkably well under low-light conditions; however, most of the known Cu-based RSs employ bidentate pyridyl ligands and often require bulky flanking groups adjacent to the nitrogen donors of these ligands to prevent distortion and binding of exogenous Lewis bases such as 4- tert -butylpyridine (TBP) that are added to enhance cell performance. Without the bulky substituents, the bidentate ligands are susceptible to ligand exchange with TBP. In this context, we have developed a Cu-based RS with a preorganized multidentate ligand designed to facilitate efficient electron transfer kinetics and high stability via the chelate effect. The Cu system, [Cu(bpyPY4)] 2+/+ , reported here is supported by the hexadentate polypyridyl ligand bpyPY4 (6,6'-bis(1,1-di(pyridine-2-yl)ethyl)-2,2'-bipyridine) and examined as a RS in DSCs. From X-ray crystallography and variable-temperature 1 H NMR studies, bpyPY4 provides a dynamic coordination environment around the metal center. Cyclic voltammetry and UV–visible and NMR spectroscopy indicate that noncoordinated pyridyl donors block binding of TBP to copper. DSC devices using [Cu(bpyPY4)] 2+/+ as the redox electrolyte gave a power conversion efficiency (PCE) value of 4.9% under 1 sun illumination (100 mW/cm 2 ). Strikingly, the device performance increased to 11.11% when irradiated with 2400 lux (0.5 mW/cm 2 ) via a fluorescent lamp light source and improved further to 15.2% PCE at 13500 lux (2.10 mW/cm 2 ). In conclusion, the Cu redox shuttle is an intriguing candidate for implementation with narrow band gap sensitizers with low oxidation potentials, which are important for high photocurrent DSC devices.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Removal of Surface Carbonate from Lithium-Ion Battery Cathode Materials via Vapor-Phase Fluorination
Herein, ultrathin metal-fluoride barrier coatings on the surface of lithium-ion battery (LIB) cathodes can improve cycling stability and prevent corrosion by acidic byproducts in the electrolyte. Atomic layer deposition (ALD) is an effective method to deposit ultrathin metal fluoride coatings on LIB cathodes. Although numerous studies have demonstrated the benefit of ALD metal fluoride coatings to LIB performance, comparatively few works have examined the effect of individual ALD precursors on the cathode surface. This paper uses X-ray photoelectron spectroscopy (XPS) measurements to elucidate the surface chemical changes on LIB cathode material surfaces upon exposure to the ALD metal fluoride precursor, hydrogen fluorine pyridine (HFPy). We found a decrease in surface carbonate and an increase in surface fluoride after HFPy exposure suggesting the conversion of lithium carbonate (Li 2 CO 3 ) to lithium fluoride (LiF). This conversion is desirable given that Li 2 CO 3 degrades LIB performance, whereas LiF provides an excellent physio-chemical barrier against chemical attack during cycling. Scanning transmission electron microscopy, X-ray energy dispersive spectroscopy, and XPS measurements following HFPy exposure to Li 2 CO 3 powder revealed the formation of a conformal LiF shell around the Li 2 CO 3 particles. Finally, we confirmed the complete conversion of similar to 7 nm ALD Li 2 CO 3 films on silicon from HFPy exposure using XPS and spectroscopic ellipsometry. The elimination of problematic Li 2 CO 3 from LIB cathode surfaces and conversion into a protective LiF coating via a single precursor vapor treatment may provide a cost-effective method for enhancing LIB performance.
25 ENERGY STORAGE↗
Sulfurized Polyacrylonitrile for High-Performance Lithium–Sulfur Batteries: In-Depth Computational Approach Revealing Multiple Sulfur’s Reduction Pathways and Hidden Li + Storage Mechanisms for Extra Discharge Capacity
Like no other sulfur host material, polyacrylonitrile-derived sulfurized carbon (SPAN) promises improved electrochemical performance for lithium–sulfur batteries, based on its compatibility with carbonate solvents and ability to prevent self-discharge and shuttle effect. However, a complete understanding of the SPAN’s lithiation mechanism is still missing because its structural features vary widely with synthesis conditions, and its electrochemical performance deviates from elemental sulfur. This study continues our research on the elucidation of the SPAN’s structural characteristics and lithiation mechanisms via computational approaches. Here, our models reproduce most experimental data regarding carbon’s graphitization level and conjugated ordering, sulfur–carbon covalent bonding, sulfur loading, and elemental composition. Our simulations emulate the discharge voltage observed in experiments for the first discharge, which reveals that sulfur follows multiple reduction pathways based on its interaction with the carbon backbone. Sulfur reduction takes place above 1.0 V vs Li/Li + mostly in the SPAN-like material, with no long-chain lithium polysulfide formation. Below 1.0 V vs Li/Li + , the backbone’s electrochemical activity occurs via multiple C–Li and N–Li interactions, mostly with edge carbon atoms and pyridinic nitrogen. Moreover, we identify Li + binding sites throughout the graphitized backbone that might lead to prohibited energy costs for Li + deintercalation, which may explain the irreversible capacity loss between the first and second discharges. This work improves understanding of lithiation mechanisms in sulfurized carbon, which is useful for rationally designing SPAN synthesis pathways tailored to increase sulfur loading and enhanced electrochemical performance.
25 ENERGY STORAGE↗
Plasma-Initiated Graft Polymerization of Acrylic Acid onto Fluorine-Doped Tin Oxide as a Platform for Immobilization of Water-Oxidation Catalysts
The discovery of new and versatile strategies for the immobilization of molecular water-oxidation catalysts (WOCs) is crucial for developing clean energy conversion devices [e.g., (photo)electrocatalytic cells for water splitting]. The traditional approach for surface attachment to transparent conductive oxides [e.g., fluorine doped tin oxide (FTO)] is via synthetic modification of the ligand architecture to incorporate functional groups such as carboxylic acids (-COOH) or phosphonates (-PO 3 H 2 ) prior to immobilization. However, challenges arising from desorption and the cumbersome derivatizations steps have limited the scope and applications of surface-bound WOCs. Herein, we report the successful immobilization of underivatized Ru(II)-based WOCs (Ru–Cat1 = [Ru(tpy) (bpy) (H 2 O)] 2+ (tpy = 2,2':6'2"–terpyridine and bpy = 2,2;-bipyridine) and Ru–Cat2 = [Ru(Mebimpy) (bpy) (H 2 O)] 2+ (Mebimpy = 2,6-bis(1-methylbenzimidazol-2-yl) pyridine)) and the Ru(II) polypyridyl chromophore Ru–C3 = [Ru(bpy) 3 ] 2+ onto a FTO plasma-grafted poly(acrylic acid) surface (PAA|FTO). Various characterization techniques such as attenuated total reflectance Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy, and cyclic voltammetry measurements provide evidence for the plasma-induced grafted PAA|FTO film and immobilization. Surface stability and electrocatalytic properties of these new hybrid composite films upon cycling were investigated at different pH values. Immobilized Ru–Cat1 and Ru–Cat2 onto PAA|FTO displayed pH-dependent (RuIII/RuII) couples and onset potentials indicative of PCET (proton-coupled electron transfer) reactions. Based on cyclic voltammetry results and spectroscopic monitoring, the immobilized WOCs Ru–Cat1 and Ru–Cat2 exhibited a higher surface stability in neutral aqueous solutions relative to Ru–C3 upon electrochemical oxidation. Furthermore, we attribute the surface PCET and stability to the presence of a water ligand in the coordination sphere of immobilized Ru–Cat1 and Ru–Cat2 which can H-bond with negatively charged carboxylate groups of the cross-linked PAA brushes. Our findings demonstrate that the plasma-grafted polymeric network onto FTO offers a versatile platform to directly anchor unmodified homogeneous WOCs or chromophores for potential applications in solar-to-fuel energy conversion.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Swelling-Assisted Sequential Infiltration Synthesis of Nanoporous ZnO Films with Highly Accessible Pores and Their Sensing Potential for Ethanol
Here, we report a swelling-assisted sequential infiltration synthesis (SIS) approach for the design of highly porous zinc oxide (ZnO) films by infiltration of block copolymer templates such as polystyrene-block- polyvinyl pyridine with inorganic precursors followed by UV ozone-assisted removal of the polymer template. We show that porous ZnO coatings with the thickness in the range between 140 and 420 nm can be obtained using only five cycles of SIS. The pores in ZnO fabricated via swelling-assisted SIS are highly accessible, and up to 98% of pores are available for solvent penetration. The XPS data indicate that the surface of nanoporous ZnO films is terminated with -OH groups. Density functional theory calculations show a lower energy barrier for ethanol-induced release of the oxygen restricted depletion layer in the case of the presence of -OH groups at the ZnO surface, and hence, it can lead to higher sensitivity in sensing of ethanol. We monitored the response of ZnO porous coatings with different thicknesses and porosities to ethanol vapors using combined mass-based and chemiresistive approaches at room temperature and 90 °C. The porous ZnO conformal coatings reveal a promising sensitivity toward detection of ethanol at low temperatures. In conclusion our results suggest the excellent potential of the SIS approach for the design of conformal ZnO coatings with controlled porosity, thickness, and composition that can be adapted for sensing applications.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting
Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.
Chromophores↗
First-Principles Calculations of the Electrical Conductivity of Carbon Nanotubes Functionalized with Copper and Nitrogen: Implications for Electronics, Energy Storage, and Nanodevices
In this work, we investigate the electrical conductivity of carbon nanotubes (CNTs), with a particular focus on the effects of doping. Using first-principles-based approaches, we study the electronic structure, phonon dispersion, and electron–phonon scattering to understand the finite-temperature electrical transport properties in CNTs. Our study covers both prototypical metallic and semiconducting CNTs, with special emphasis on the influence of typical defects such as vacancies and the incorporation of copper or nitrogen, such as pyridinic N, pyrrolic N, graphitic N, and oxidized N. Our theoretical study shows significant improvements in the electrical conduction properties of copper-CNT composites, especially when semiconducting CNTs are functionalized with nitrogen. Doping is found to cause significant changes in the electronic density of states near the Fermi level, which affects the electrical conductivity. Calculations show that certain types of functional groups, such as N-pyrrolic, result in more than 30-fold increase in the conductivity of semiconducting CNTs compared to Cu-incorporated CNTs alone. For metallic CNTs, the conductivity is in agreement with existing experimental data, and our prediction of significant increases in conductivity with N-pyrrolic functional group is consistent with recent experimental results, demonstrating the effectiveness of doping in modifying conductivity. In conclusion, our study provides valuable insight into the electronic properties of doped CNTs and contributes to the development of ultrahigh conductivity CNT composites.
36 MATERIALS SCIENCE↗
Copper-Catalyzed Oxidation of Hydrazones to Diazo Compounds Using Oxygen as the Terminal Oxidant
In this work, a mild method for accessing diazo compounds via aerobic oxidation of hydrazones is described. This catalytic transfor-mation employs a Cu(OAc) 2 /pyridine catalyst and molecular oxygen from ambient air as the terminal oxidant, generating water as the sole byproduct and affording the desired diazo compounds within minutes at room temperature. A broad array of electronically diverse aryldiazo esters, ketones and amides can be accessed. Pyridine dramatically enhances the rate of the reaction by solubilizing the copper catalyst and serving as Brønsted base in the turnover-limiting proton-coupled oxidation of hydrazone by copper(II). Insights gained from mechanistic studies led to expansion of the scope of this method to include diaryl hydrazones, delivering diaryl diazomethane derivatives, which cannot be accessed via established diazo transfer meth-ods. The products of this method may be employed in rhodium carbene catalysis without isolation of the diazo intermediate to afford cyclopropane products in good yield with high enantioselectivity.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Mechanistic Similarities and Differences for Hydrogenation of Aromatic Heterocycles and Aliphatic Carbonyls on Sulfided Ru Nanoparticles
This study establishes the contrasting reactivity trends for the hydrogenation of aromatic hydrocarbons (AHCs = C n H m X, X = N, S, O, and C) and aliphatic carbonyls [R a C(O)R b ; R a = alkyl group, R b = CH 3 or H] on sulfided Ru clusters arising from the difference in the elementary proton and hydride attack catalytic sequence. Both reactions require sequential additions of a proton from either Ru n+ –(SH 2 ) or S 2 –(H δ+ ) species and a hydride from Ru n+ –(H δ– ) species to the unsaturated C=X bonds. For the five-membered-ring aromatic heterocycles (AHCs = pyrrole, thiophene, and furan), an initial proton addition limits the catalytic turnovers; thus, their hydrogenation reactivity increases with increasing gas-phase proton affinities of the AHCs. Pyridine as the more basic six-membered N-AHC is more susceptible to protonation; therefore, it is more reactive, and its initial proton addition is quasi-equilibrated, followed by the kinetically relevant hydride addition. Conversely, aliphatic carbonyls prefer to undergo hydrogen additions in a reverse sequence, where a Ru n+ –(H δ– ) hydride initially attacks the electron-deficient carbonyl C atom as the kinetically relevant step before a subsequent rapid S 2 –(H δ+ ) proton addition on the electron-rich O atom, as confirmed by isotopic exchange studies with butanal-D 2 and 1-butanol-D 2 mixtures and density functional theory calculations on S-deficient RuS 2 (100) surfaces. For these reasons, their hydrogenation reactivity increases with increasing gas-phase hydride affinities of the carbonyls. On metallic Ru surfaces without sulfur, hydrogen adatoms (H*) are the only reactive hydrogen species; the reactivity of their attack on aromatic heterocycles increases with increasing reactant proton affinities much more sensitively than that on sulfided Ru surfaces. This work illustrates the distinct catalytic roles of the diverse hydrogen species in hydrogenation—the interplay between proton and hydride additions has marked catalytic consequences in shaping the free energy landscape of the reactions, which in turn leads to the observed kinetic dependences, kinetic parameters, reactivity trends, and scaling relations between the measured barriers and the appropriate kinetic descriptors, that is, proton affinity of AHCs and hydride affinity of carbonyls in hydrogenation catalysis. Here, these mechanistic similarities and differences provide explanations of the observed reactivity trends and thus have profound implications for industrial hydrogenation and hydrotreating catalysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
The Dependence of Olefin Hydrogenation and Isomerization Rates on Zirconium Metal–Organic Framework Structure
Zirconium metal–organic frameworks (Zr-MOFs) are a structurally diverse and well-defined class of materials studied in heterogeneous catalysis. Previously, we showed that partial dehydration of the Zr 6 O 8 node in NU-1000 results in heterolytic H 2 cleavage over adjacent Lewis acid and base sites, leading to catalytic conversion of 1-butene. In this work, given the ubiquity of the Zr 6 O 8 node as a secondary building unit (SBU) in Zr-MOFs, with many different potential MOF topologies and capping ligands surrounding the cluster, we study the influence of thermal pretreatments and MOF topology (MOF-808, NU-1000, UiO-66, and NU-1000-NDC) on the activity of the Zr 6 O 8 cluster for H 2 activation and 1-butene hydrogenation and isomerization. Diffuse reflectance IR in the presence of H 2 and pyridine shows that both thermal pretreatment and MOF topology affect the Brønsted acidity of protons generated from H 2 activation and their resulting activity for olefin conversion. High isomerization activity of dehydrated NU-1000 is correlated with the formation of μ 3 OH species after H 2 activation. Additionally, catalytic studies show that the geometry of open coordination sites on individual Zr 6 O 8 nodes influences butene hydrogenation. For this reason, MOF-808 gives anomalously low hydrogenation activity, despite its relatively high total number of open coordination sites, as calculated either from its crystal structure or from NH 3 adsorption. Furthermore, these results reiterate the importance of pretreatment in defining MOF catalytic activity and demonstrate that MOF topology, outside of simply affecting node accessibility, influences reactivity at individual nodes.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Reconceptualizing the Ir III Role in Metallaphotoredox Catalysis: From Strong Photooxidant to Potent Energy Donor
Dual Ir III /L n Ni II metallaphotoredox catalyzed C(sp 3 )–C(sp 2 ) cross-coupling reactions are widely assumed to proceed by photoinduced single electron transfer steps due to the highly oxidizing Ir III * excited state (Ir III = [Ir(dF(CF 3 )ppy) 2 (dtbbpy)] + [PF 6 ] – ; dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; L n = dtbbpy = 4,4'-di-tert-butyl-2,2'-bipyridine). Using time-resolved absorption and emission spectroscopy, we reveal that energy transfer between Ir III * and various LnNi II precatalysts and intermediates with k q ≥ 10 8 M –1 s –1 also drives catalysis. Specifically, the excited states of L n Ni II dihalide precatalysts/organometallic intermediates accessible by energy transfer appear to drive bond homolysis, halogen radical elimination, and reductive elimination reactions that facilitate formation of cross-coupled products. Energy transfer dynamics consequently circumvent the need for photoinduced electron transfer, thereby extending substrate scopes to coupling partners that cannot be oxidized by Ir III *. Within a cross-electrophile coupling model reaction between 4-bromobenzotrifluoride and bromocyclohexane, energy transfer activates the L n Ni II precatalyst at early reaction times before nucleophilic reductants are present. In the absence of Ir III , direct excitation of L n Ni II (Br) 2 also activates the precatalyst to form a L n Ni II (Br)(Aryl) intermediate. To compare energy transfer and electron transfer kinetics, we determined rate constants for reductive quenching by Br – (k SET = 4.1 × 10 8 M –1 s –1 ) and for the subsequent electron transfer from reduced Ir III•– to L n Ni II (Br) 2 (k SET = 4.1 × 10 7 M –1 s –1 ) using Stern-Volmer analysis and pulse radiolysis, respectively. Energy transfer rate constants are competitive with the electron transfer rate constants and energy transfer is a parallel pathway within metallaphotoredox catalysis. Exploiting the energy transfer mechanism, we demonstrate highly selective cross-electrophile coupling between 4-chlorobenzotrifluoride and bromocyclohexane to form exclusively cross-coupled product. Here, with alkyl-trifluoroborate nucleophiles that do not reductively quench IrIII* emission, transmetalation with L n Ni II (Br/Cl)(Aryl) followed by energy transfer also drives excited state reductive elimination to form C(sp 3 )–C(sp 2 ) cross-coupled product. Similarly, energy transfer rather than Ni II oxidation drives C(sp 2 )–OR reductive elimination, despite the strongly oxidizing ability of Ir III *. In total, these reactions demonstrate energy transfer processes from Ir III * to L n Ni II in metallaphotoredox catalysis that can unlock alternative reactive pathways.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Shallow Rate-Redox Potential Scaling in Aqueous Molecular Oxygen Reduction Electrocatalysis Across a Family of Iron Macrocycles
Rate-overpotential scaling relationships have been employed widely to understand trends in oxygen reduction reaction (ORR) electrocatalysis by dissolved metal macrocycles in organic electrolytes. Similar scaling relationships remain unknown for surface-adsorbed ORR electrocatalysts in the acidic aqueous environments germane to proton-exchange membrane (PEM) fuel cells. Herein, we examine ORR catalysis in aqueous perchloric acid media for a structurally diverse array of iron macrocycle complexes adsorbed on Vulcan carbon black. The macrocycles encompass Fe– N 4 , Fe–N 2 N' 2 and Fe–N x C 4-x motifs bearing pyrrolic, pyridinic, and N-heterocyclic carbene (NHC) moieties in the primary ligation sphere, giving rise to a 670 mV range in Fe(III/II) redox potentials, E Fe(III/II) . Experimental Tafel data in the micropolarization regime were extrapolated to the E Fe(III/II) to furnish estimated per-site-normalized current density (j per-site ) values that span ~4.6 orders of magnitude across the family of compounds. Despite the structural diversity of this family of compounds, extrapolated j per-site values correlate with the Fe(III/II) redox potentials in a roughly log-linear fashion with a shallow scaling factor of approximately 145 mV/decade. Further, these findings highlight that negative shifts in E Fe(III/II) lead to diminishing returns in catalytic rate promotion and suggest that changes to the primary ligating environment in a macrocycle are insufficient to break fundamental rate-potential scaling relationships in aqueous ORR catalysis. Together these studies motivate the further development of higher-potential iron complexes that employ motifs beyond the equatorial ligation plane to enhance ORR catalysis.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗